## Summary
`bl602_spi_cmddata()` implements SPI Cmd/Data `SPI_CMDDATA()` for only 3 LCD drivers: ST7735, ST7789 and GC9A01.
This patch removes the check for LCD drivers, so that SPI Cmd/Data will work for all LCD drivers.
More details: https://github.com/apache/incubator-nuttx/pull/5898
## Impact
This change impacts LCD drivers that call `SPI_CMDDATA()`.
Previously `SPI_CMDDATA()` would fail with `ENODEV` for LCD drivers other than ST7735, ST7789 and GC9A01.
After patching, `SPI_CMDDATA()` will work correctly with all LCD drivers.
## Testing
We tested with LVGL and ST7789 on PineCone BL602:
- [Testing with LVGL](https://github.com/lupyuen/st7789-nuttx#run-lvgl-demo)
As for regular SPI Devices that don't require SPI Cmd/Data, we tested `CONFIG_SPI_CMDDATA=y` with Semtech SX1262 SPI Transceiver on PineCone BL602:
- [Testing Cmd/Data](https://github.com/lupyuen/incubator-nuttx/releases/tag/release-2022-03-30)
## Summary
To control the Data/Command Pin on ST7789 SPI Display, the SPI Driver flips the MISO Pin as though it was a GPIO.
To implement this on BL602, we reconfigure MISO from SPI Pin to GPIO Pin on the fly inside `bl602_spi_cmddata()`.
When the SPI Port is deselected (after the SPI operation), we revert MISO back from GPIO Pin to SPI Pin. We implement this inside `bl602_spi_select()`.
[More Details Here](https://github.com/lupyuen/st7789-nuttx#spi-cmddata)
## Impact
This change impacts 3 LCD drivers that call `SPI_CMDDATA()`: ST7735, ST7789, GC9A01.
Previously the BL602 SPI Driver would fail with "SPI cmddata not supported" when the above drivers are used.
After the change, the above drivers will set the LCD Data/Command Pin correctly.
## Testing
We tested this implementation of SPI Cmd/Data with NuttX ST7789 Driver and a Logic Analyser on PineCone BL602:
- [Testing with Logic Analyser](https://github.com/lupyuen/st7789-nuttx#spi-cmddata)
We also tested LVGL with ST7789 on PineCone BL602:
- [Testing with LVGL](https://github.com/lupyuen/st7789-nuttx#run-lvgl-demo)
As for regular SPI Devices that don't require SPI Cmd/Data, we tested `CONFIG_SPI_CMDDATA=y` with Semtech SX1262 SPI Transceiver on PineCone BL602:
- [Testing Cmd/Data](https://github.com/lupyuen/incubator-nuttx/releases/tag/release-2022-03-29)
## Summary
SPI Poll Send `bl602_spi_poll_send()` doesn't send any SPI Data because it doesn't enable SPI Master and it doesn't clear the SPI FIFO. Also it hangs because it loops forever waiting for the FIFO.
We fix this problem by moving the code that enables SPI Master and clears the FIFO, from SPI Poll Exchange `bl602_spi_poll_exchange()` to SPI Poll Send. (Note that SPI Poll Exchange calls SPI Poll Send)
[More Details Here](https://github.com/lupyuen/st7789-nuttx#fix-spi-send)
## Impact
This problem affects all NuttX Drivers that call `SPI_SEND()` on BL602, including the ST7789 Display Driver.
Previously `SPI_SEND()` didn't send any SPI Data and never returns, because it loops forever waiting to receive data.
Now `SPI_SEND()` sends data and returns correctly.
[More Details Here](https://github.com/lupyuen/st7789-nuttx#fix-spi-send)
## Testing
We tested the modified SPI Poll Send with NuttX ST7789 Driver and a Logic Analyser on PineCone BL602:
- [Testing with Logic Analyser](https://github.com/lupyuen/st7789-nuttx#fix-spi-send)
We also tested LVGL with ST7789 on PineCone BL602:
- [Testing with LVGL](https://github.com/lupyuen/st7789-nuttx#run-lvgl-demo)
As for the modified SPI Poll Exchange, we tested with Semtech SX1262 SPI Transceiver on PineCone BL602:
- [Testing SPI Poll Exchange](https://github.com/lupyuen/incubator-nuttx/releases/tag/release-2022-03-25)
The xxx_netinitialize is defined to a function only if
CONFIG_NET=y and CONFIG_NETDEV_LATEINIT=n. Otherwise it
is defined to an empty macro.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
USB EP0 reads data from the fifo but doesn't mark the read
done which adds significant delays. Fix this unnecessary
slowdown due to operation timeouts by finishing the read
properly.
Also add a missing function description to the function
mpfs_ep_set_fifo_size().
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Move the target specific memory map to a separate file so there is no
need to copy&paste the __xxram_start etc linker symbols to each file
that needs them.
Also add MMU flags for I/O and kernel areas, they will be needed
when the kernel runs with virtual addresses also.
Some fields of mstatus were marked as Reserved Writes Preserve Values, Reads Ignore Values (WPRI),
so we must keep its origin value with addition flags.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
In smp system riscv_cpu_boot run in idle task so there is a overlap with the origin coloration range and in used stack.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Fix EP0 stall and resume properly. EP0 wasn't clearly addressed
on stall / resume operations.
Also fix data reads that provide garbage for the first request.
It has always random data as it's completed prior to any read
operation.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Mux USB IO pins one-by-one using package specific pinmux definitions. This avoids accidentally overwriting IO settings for other pins.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
include theis commit:
commit 6ad8917b7e27e5e80fb9268492b9111b17ed2024
Author: Petro Karashchenko <petro.karashchenko@gmail.com>
Date: Fri Jan 28 09:13:23 2022 +0200
lib: fix compilation when strings.h is included
In a systems that provide strings.h and it is included
together with sbi_bitops.h the compilation error appears.
The ffs() and fls() are provided by strings.h
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
and fix this warning:
Error: include/sbi/sbi_bitops.h:47:19: declaration of 'ffs' shadows a built-in function
static inline int ffs(int x)
^~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
