All modern desgin support stack pointer and it's also an
important information, so let's standardize this interface.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Drop to user-space in kernel/protected build with up_pthread_exit,
now all pthread_cleanup functions executed in user mode.
* A new syscall SYS_pthread_exit added
* A new tcb flag TCB_FLAG_CANCEL_DOING added
* up_pthread_exit implemented for riscv/arm arch
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
The RISC-V Integer Calling Convention states that the stack pointer
shall always be aligned to a 128-bit boundary upon procedure entry, both
for RV32* and RV64* ISAs (exception to the RV32E ISA, which must follow a
specific convention)
Summary:
- The CONFIG_SMP_IDLETHREAD_STACKSIZE was introduced to optimize
the idle stack size for other than CPU0
- However, there are no big differences between the idle stacks.
- This commit removes the config to simplify the kernel code
Impact:
- All SMP configurations
Testing:
- Tested with ostest with the following configs
- spresense:smp, spresense:rndis_smp
- esp32-devkitc:smp (QEMU), maix-bit:smp (QEMU)
- sabre-6quad:smp (QEMU), sabre-6quad:netnsh_smp (QEMU)
- raspberrypi-pico:smp, sim:smp (x86_64)
Signed-off-by: Masayuki Ishikawa <asayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds coloration for the idle stacks
Impact:
- k210 only
Testing:
- Tested with smp and nsh configs with QEMU and dev board
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds coloration for the idle stack
- Also, apply la pseudo-instruction instead of lui and addi
Impact:
- fe310 only
Testing:
- Tested with nsh with QEMU and dev board
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
arch: Allocate the space from the beginning in up_stack_frame
and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I noticed that stack corruption happens due to recent refactoring
- This commit fixes this issue
Impact:
- SMP only
Testing:
- Tested with maix-bit:smp (QMU and dev board)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
All supported arch uses a push-down stack:
The stack grows toward lower addresses in memory. The stack pointer
register points to the lowest, valid working address (the "top" of
the stack). Items on the stack are referenced as positive(include zero)
word offsets from sp.
Which means that for stack in the [begin, begin + size):
1.The initial SP point to begin + size
2.push equals sub and then store
3.pop equals load and then add
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Ken Pettit has submitted the ICLA and we can migrate the licenses
to Apache.
Sebastien Lorquet has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
tcpip ok
update wifi demo configuration
fix tcpip input cause misalign fault
change some api definetions in nuttx
fix wifi manager strlen copy without suffix null character
fix 602 network buf allocation issue
wifi scan works
[ble] Add controller code
[BLE] Add nuttx adapt code for blecontroller .
[BLE] modified include file path, to fix cflag is too long.
[ble]Test ble peripheral pass, save code.
[ble] Organize the code
[BLE] Add blecontroller config for nuttx
[BLE] Add config for ble example
fix tcp lost packet when rx
support wpa3.
Copy default config from wifi default config. Create ble for local test and ble tester for autopts.
Add config for local test.
Add pts teset config for host test
Add config for mesh test
Create task to init blecontroller
Delete blecontroller rx thread.
using idle task to receive hci command from host
Set ble device name to /dev/ble, and fix code.
1.fix a ke schedule risk 2. CFG_HOST is enabled only in the case that CONFIG_BLE_HOST_DISABLE is not enabled, by lanlan
rm _sp_main stack.
change h/l workq_stack_size 6K
change l workq_stack_size 3K.
[ble] delete file_detach
color idle stack.
clear bl602 netdev code
SCAN is sorted according to RSSI
enlarge nsh command line buffer
fixup stack overflow check checkfail when startup
arch/risc-v/BL602:fix reboot cause crash
reboot default use romapi.
riscv/bl602:netdev support defered input, remove wifi_tx function
risc-v/bl602:fix sem_timedwait usage error in bl_cmds
risc-v/bl602:fix memory access out of bounds when copy ssid
remove ble and wifi source, download when build
add bl602 blob gitignore
risc-v/bl602:remove ble-pts defconfig
Fix some typos in NuttX style naming
Fix the replacement of tab to space
fix wlan interface down still receive packet
fix wapi crash, rx when ifdown,and ble_hci_rx_do
change system reset to rom dirver
change ble hci interval to 50ms
NuttX support wifi enable/disable log via KConfig
support country code configuration in Kconfig
fix ap tx not work
since other subsystem doesn't need call these function anymore
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Idfb217c412db62d9f17f427310b75bb78785dc50
Bug description:
CONFIG_SMP=y
Suppose we have 2 cores in SMP, here is the ps return:
PID GROUP CPU PRI POLICY TYPE NPX STATE STACK USED FILLED COMMAND
0 0 0 0 FIFO Kthread N-- Assigned 004076 000748 18.3% CPU0 IDLE
1 0 1 0 FIFO Kthread N-- Running 004096 000540 13.1% CPU1 IDLE
nsh> kill -4 0
or:
nsh> kill -4 1
system blocked.
Reason:
In func xx_sigdeliver() restore stage, when saved_irqcount == 0, that means
rtcb NOT in critical_section before switch to xx_sigdeliver(), then we need
reset the critical_section state before swith back.
Fix:
Add condition to cover saved_irqcount == 0.
Change-Id: I4af7f95e47f6d78a4094c3757d39b01ac9d533b3
Signed-off-by: ligd <liguiding1@xiaomi.com>
The GPIO example was also extended to include testing an interrupt pin.
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Co-authored-by: Alan Carvalho <alan.carvalho@espressif.com>
This commits adds support for the ESP32-C3 IO Mux and GPIO Matrix. It
also includes necessary board logic to run the GPIO example with 2
outputs.
Co-authored-by: Alan Carvalho <alan.carvalho@espressif.com>
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Summary:
- This commit changes spinlock APIs (spin_lock_irqsave/spin_unlock_irqrestore)
- In the previous implementation, the global spinlock (i.e. g_irq_spin) was used.
- This commit allows to use caller specific spinlock but also supports to use
g_irq_spin for backword compatibility (In this case, NULL must be specified)
Impact:
- None
Testing:
- Tested with the following configurations
- spresnse:wifi, spresense:wifi_smp
- esp32-devkitc:smp (QEMU), sabre6-quad:smp (QEMU)
- maxi-bit:smp (QEMU), sim:smp
- stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
This function is already declared in include/nuttx/init.h include this
file instead.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Don't declare riscv_addregion if CONFIG_MM_REGIONS is < 1, so we won't
have to provide a dummy stub for every chip.
Also rename the function from up_addregion to riscv_addregion since it's
not exported outside the arch directory.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Modify the default configuration in KConfig.
Sync latest commit from mainline.
Remove unused demo configuration
fixup bl602 nsh defconfig cause CICD failed
Rebase from mainline code
Summary:
- During repeating ostest with sabre-6quad:smp (QEMU),
I noticed that pthread_rwlock_test sometimes stops
- Finally, I found that nxtask_exit() released a critical
section too early before context switching which resulted in
selecting inappropriate TCB
- This commit fixes this issue by moving nxsched_resume_scheduler()
from nxtask_exit() to up_exit() and also removing
spin_setbit() and spin_clrbit() from nxtask_exit()
because the caller holds a critical section
- To be consistent with non-SMP cases, the above changes
were done for all CPU architectures
Impact:
- This commit affects all CPU architectures regardless of SMP
Testing:
- Tested with ostest with the following configs
- sabre-6quad:smp (QEMU, dev board), sabre-6quad:nsh (QEMU)
- spresense:wifi_smp
- sim:smp, sim:ostest
- maix-bit:smp (QEMU)
- esp32-devkitc:smp (QEMU)
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes global IRQ control logic
- In previous implementation, g_cpu_irqset for a remote CPU was
set in sched_add_readytorun(), sched_remove_readytorun() and
up_schedule_sigaction()
- In this implementation, they are removed.
- Instead, in the pause handler, call enter_critical_setion()
which will call up_cpu_paused() then acquire g_cpu_irqlock
- So if a new task with irqcount > 1 restarts on the remote CPU,
the CPU will only hold a critical section. Thus, the issue such as
'POSSIBLE FOR TWO CPUs TO HOLD A CRITICAL SECTION' could be resolved.
- Fix nxsched_resume_scheduler() so that it does not call spin_clrbit()
if a CPU does not hold a g_cpu_irqset
- Fix nxtask_exit() so that it acquires g_cpu_irqlock
- Update TODO
Impact:
- All SMP implementations
Testing:
- Tested with smp, ostest with the following configurations
- Tested with spresense:wifi_smp (NCPUS=2,4)
- Tested with sabre-6quad:smp (QEMU, dev board)
- Tested with maix-bit:smp (QEMU)
- Tested with esp32-core:smp (QEMU)
- Tested with lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
