sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,798 Commits 1 Branch 0 Tags 291 MiB
089578319a
Commit Graph

76 Commits

Author SHA1 Message Date
Gregory Nutt
089578319a STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane 2014-12-27 18:58:18 -06:00
Gregory Nutt
33f7151cd9 Remove STM32-specific RX flow control logic from the upper level serial driver to the lower level STM32 serial driver 2014-12-27 09:45:45 -06:00
Gregory Nutt
32fd858dc6 Serial RX Flow Control: Fix a bunch of compile problems introduced into unbuilt, conditioned out logic 2014-12-27 08:15:41 -06:00
Gregory Nutt
2fadd0da4b Eliminate an unnecessary calculation in the serial RX flow control logic 2014-12-27 08:00:48 -06:00
Gregory Nutt
aefde565d3 Serial Upper Half: Add watermarks to RX flow control logic 2014-12-27 07:43:06 -06:00
Gregory Nutt
623757d77c Update TODO list and add REVISIT comment 2014-12-13 08:44:28 -06:00
Gregory Nutt
d09bb13833 In case a thread is doing a blocking operation (e.g. read()) on a serial 
device, while it is being terminated by pthread_cancel(), then
uart_close() gets called, but the semaphore (dev->recv.sem in the above
example) is still blocked.

This means that once the serial device is opened next time, data will
arrive on the serial port (and driver interrupts handled as normal), but
the received characters never arrive in the reader thread.

This patch addresses the problem by re-initializing the semaphores on the
last uart_close() on the device.
 2014-12-13 08:07:21 -06:00
Gregory Nutt
0ec5043a4e Add an interface definition and upper half driver for a discrete joystick device 2014-11-27 17:42:16 -06:00
Gregory Nutt
5d231b25f0 SAMA5D3 Xplained: Add an apps/examples/bridge configuration 2014-11-20 16:24:30 -06:00
Gregory Nutt
5120d745fd Fix some typos 2014-10-29 10:48:50 -06:00
Gregory Nutt
6c9f325e1e Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS 2014-10-27 11:31:16 -06:00
Gregory Nutt
37e08c3b49 The olimex-efm32g880f128-stk now defaults to use LEUART1 as the serial console. Also fixes lots of compile bugs from the original LEUART checkin 2014-10-21 11:38:51 -06:00
Gregory Nutt
d13c9a08b9 EFM32: Add configuration support for LEUARTs 2014-10-21 09:37:02 -06:00
Gregory Nutt
47d55c28dc Mostly cosmetic changes 2014-09-04 10:28:38 -06:00
Gregory Nutt
320707fdfa SAMA5: Fix bugs in timer/counter interrupts and one-shot timer 2014-08-10 10:47:38 -06:00
Gregory Nutt
b5efb9dd77 Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:01:14 -06:00
Gregory Nutt
7594d8b8cf Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
7ad2ace833 Costmetic changes to some comments 2014-04-14 16:36:07 -06:00
Gregory Nutt
3a1324741a More trailing whilespace removal 2014-04-13 14:32:20 -06:00
Gregory Nutt
cbdc9155ab SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console 2014-04-01 11:24:15 -06:00
Gregory Nutt
113d5a2a81 Correct an error introduced in this file in very recent commits 2014-03-06 15:33:02 -06:00
Gregory Nutt
17a96f6e1e configs/us7032evb1/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 09:17:11 -06:00
Gregory Nutt
ba6fe788ea SAMA5 serial: Restore logic to minimize TX interrupts. Oddly, seems to improve ADC stability 2013-10-26 16:02:07 -06:00
Gregory Nutt
0ab6d8382f SAMA5 TC: Debug instrumentation 2013-10-26 14:03:30 -06:00
Gregory Nutt
bc46b447dc Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
dd3c682443 SAMA5: Some improvements to the HSCMI card removal/insertion logic 2013-08-11 11:13:11 -06:00
Gregory Nutt
82b528e0c8 Serial FIONREAD, FIONWRITE, and TERMIOS I/O processing from Mike Smith, Andrew Tridgell, and and Lorenz Meier 2013-08-10 19:14:05 -06:00
Gregory Nutt
968b2553cd Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level 2013-08-10 09:06:53 -06:00
Gregory Nutt
77e1c27005 Update SAMA5D3x-EK board configuration to support on-board UART connections, LEDs, and push buttons 2013-07-24 12:27:12 -06:00
Gregory Nutt
9cf942bcb2 SAM3/4: Loop counter for PLL delay must be volatile or it may get optimized away 2013-06-13 16:18:25 -06:00
Gregory Nutt
3edec35c51 Add flow control support to the STM32 serial driver; Fix some issues with UART2 and 5. From Lorenz Meier and Mike Smith 2013-06-06 14:49:14 -06:00
Gregory Nutt
420ca1b256 configs/freedom-kl25z: Change references to NuTiny to Freedom KL25Z 2013-04-25 20:09:15 -06:00
Gregory Nutt
b630e6a153 Useless TIOCSERGSTRUCT logic in most serial drivers is not compiled unless CONFIG_DEBUG and CONFIG_SERIAL_TIOCSERGSTRUCT are defined 2013-04-25 15:52:48 -06:00
patacongo
0bfa1b75e2 Add support for STM32 F427/437 chips. From Mike Smith 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5807 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-01 13:43:31 +00:00
patacongo
ebf9960deb convert Kwikstik K40 configurations to use kconfig-frontends tools 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5784 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-25 17:33:41 +00:00
patacongo
730dc3e202 Add missing implementation of O_NONBLOCK for serial writes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5755 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-18 16:04:29 +00:00
patacongo
d621681866 Some NuTiny-SDK-NUC120 size reduction; All serial driver vtables should be static const 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5683 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-27 22:24:49 +00:00
patacongo
ad447766ff Fix a readline bug. If a NUL is received, it would return end-of-file 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5633 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-10 00:46:27 +00:00
patacongo
cf411bec51 A spurious checkin... I just want to improve some code structure 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5597 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-02 01:50:34 +00:00
patacongo
11aa231cf0 drivers/serial.c: Fix some race conditions. Some bad things code happen if we lost a USB connection at certain times. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5596 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-02 00:29:55 +00:00
patacongo
9a05ccdbbc Last minute 6.25 change 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5595 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-01 22:51:34 +00:00
patacongo
1b94639432 Misc clean; mark assertions as non-returning; allow toolchain prefix to be overriden from make command line 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5591 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-31 23:29:34 +00:00
patacongo
cdbbfaa464 Fix readline return value; Add support for removable serial devices 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5589 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-31 16:52:20 +00:00
patacongo
df9a72994f configs/xtrs/nsh and pashello now use kconfig-frontends and build Windows native 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5422 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-09 17:34:53 +00:00
patacongo
620d1c9a33 configs/xtrs/ostest converted to kconfig-frontend and Windows native 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5421 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-08 23:21:34 +00:00
patacongo
a93d7eb69e Shenzhou board is first to use ONLY Kconfig for configuration 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5114 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-08 13:56:21 +00:00
patacongo
08ef9d0367 Add Kconfig settings for the LPC17xx 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5094 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-05 17:20:19 +00:00
patacongo
e3f1d80ed6 Refactor serial configuratin; AVR teensy Kconfig now builds 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5092 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-05 12:45:35 +00:00
patacongo
59588247bf Kconfig changes + back out part of last check-in: The 2STOP setting must be integer 0/1, not boolean 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5086 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-04 15:28:56 +00:00
patacongo
70b1c3f2f6 Make the lib/ subdirectory build more like other directories 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5025 42af7a65-404d-4744-a932-0658087f49c3
 2012-08-13 22:27:06 +00:00