sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
35,225 Commits 1 Branch 0 Tags 291 MiB
08b596d26d
Commit Graph

12113 Commits

Author SHA1 Message Date
Augusto Fraga Giachero
08b596d26d rch/arm/src/lpc17xx_40xx/lpc17_40_i2c.c: Respect the I2C_M_NOSTART flag. Sending a restart condition when not requested will break other drivers that depend on this behavior. 2019-09-17 16:14:58 -06:00
Gregory Nutt
a8a59df260 arch/arm/src/stm32f0l0g0/stm32*_pwr.c: Add some files missing in a previouis commit. 2019-09-17 11:34:05 -06:00
Daniel Pereira Volpato
031b83cff3 arch/arm/src/stm32f0l0g0/stm32*_pwr.c and stm32g0_rcc.c: Scale dynamic voltage and flash wait states properly on STM32G0 chips. 
arch/arm/src/stm32f0l0g0/stm32g0_rcc.c: Set VOS and flash wait states properly
arch/arm/src/stm32f0l0g0/stm32f0l0_pwr.c: Renamed from arch/arm/src/stm32f0l0g0/stm32_pwr.c
arch/arm/src/stm32f0l0g0/stm32g0_pwr.c: Preliminary implementation of PWR module for STM32G0 (stm32_pwr_setvos() only)
 2019-09-17 11:29:49 -06:00
Daniel Pereira Volpato
61055cee94 Add support for STM32G070xx 
arch/arm/include/stm32f0l0g0: add support for STM32G070CB, STM32G070KB, STM32G070RB
arch/arm/src/stm32f0l0g0: add support for STM32G070CB, STM32G070KB, STM32G070RB
 2019-09-17 11:10:38 -06:00
Juha Niskanen
ebc6f51641 Fix some typos 2019-09-17 10:46:23 -06:00
Takayoshi Koizumi
ef28729374 boards/arm/cxd56xx/spresense/include/board_pinconfig.h: Add board specific pin configurations of CXD5602 pins to fit Spresense board. 2019-09-16 15:32:58 -06:00
Gregory Nutt
20f4e05b09 arch/arm/src/stm32h7/stm32_ethernet.c: Bazooka Joe's fix to the STM32 F7 Ethernet driver (ec4a7be5c2) should be applied to the H7 as well. The other STM32 Ethernet driver already has the change. 2019-09-16 08:24:58 -06:00
Bazooka Joe
ec4a7be5c2 Merged in BazookaJoe1900/nuttx/pr-network_stm32_freebuffer (pull request #1030) 
Large ethernet packet can leads network halt

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-09-16 13:52:56 +00:00
Gregory Nutt
e2949d0dcf boards/arm/stm32/axoloti, omnibusf4, and stm32f4discovery: If CONFIG_SCHED_CRITMONITOR is selected, then make sure that ITM and DWT resources are enabled before accessing ITM and DWT registers. By default, these registers are disabled. Suggested by Juha Niskanen. 2019-09-13 07:22:00 -06:00
Nathan Hartman
366053e464 Fix typos, 1 in a #define, others in comments. This changes one definition: _MQ_TIMEDRECIEVE is changed to _MQ_TIMEDRECEIVE. It appears this symbol is not used anywhere. 2019-09-11 08:56:56 -06:00
Adam Porter
1da921c00f STM32, STM32F7, STM32H7, STM32L4, and EFM32 USB Host: This change was required to get my devices (CDC-MBIM) to enumerate. Initially the system timed out retrieving the USB configuration descriptor. Ctrl IN requests got nothing but NAKs. I found that the initial SETUP packet and corresponding IN transfer were fine; it was the Status OUT phase that was getting the NAK. After receiving a NAK on the Status OUT, the code would loop back and issue another ctrl IN, which will always fail because the data was already transferred before. Thus the entire transfer would 'timeout'. The fix I implemented moves the DATANAK timeout loop to only apply to the Status OUT. Of course this worked for my devices, but maybe isn't the right solution in general. I think that both the ctrl IN and the Status OUT need their own retry loops? 2019-09-09 17:08:31 -06:00
Oki Minabe
f9327b6b06 arch/arm/src/armv7-a/arm_pgalloc.c: Fix L2 page table mask for armv7-a. 2019-09-08 07:06:00 -06:00
Oki Minabe
c570439c07 arch/arm/src/armv7-a/arm_addrenv_utils.c: Fix double increment in armv7-a's arm_addrenv_destroy_region(). 2019-09-08 07:04:37 -06:00
Oki Minabe
3e44e9107c arch/arm/src/armv7-a: Fix typo and missing quotation for armv7-a. 2019-09-08 07:01:57 -06:00
Gregory Nutt
4b1eecad66 EFM32 OTG host: Adam porters fix for STM32 FS/HS probably should be applied to EFM32 host which which has very similar IP. 2019-09-08 06:58:34 -06:00
Gregory Nutt
726ea3c8a9 stm32f7/h7/l4 OTG host: Adam porters fix for STM32 FS/HS probably should be applied to STM32 F7, H7, and L4 OTG host which are very similar. 2019-09-08 06:50:47 -06:00
Adam Porter
5b4516d291 arch/arm/src/stm32/stm32_otg[fs|hs]host.c: STM32 host only initiates transfer if buflenl > 0. 2019-09-08 06:46:54 -06:00
Juha Niskanen
822bb06967 Fix some typos. Also minor update to stm32f7/nucleo-144/README.txt and stm32l4/nucleo-l496zg/README.txt board documentation. 2019-09-05 08:12:50 -06:00
Loyen Wang
0ad5bc50fb arch/arm/src/arm/up_fullcontextrestore.S: When performing stability test, the application would cause kernel crash. When I trace the stack, I find that register R1 has been changed, and its value is the same as register CPSR. In p_fullcontextrestore.S, the restoration of R0 and R1 is not atomic: 'msr cpsr r1 will enable interrupts and the recovery of r0 and r1 may be interrupted and the value or R1 may be changed. Fix is to use a single ldmia to restore R0, R1, and return via R15. 2019-09-04 07:49:27 -06:00
Augusto Fraga Giachero
68bbc8438c drivers/timers/pwm.c: Move the pwm/pwm.c driver to timers/pwm.c, The drivers/pwm contained only one .c file (pwm.c), so to avoid the proliferation of sub-directories inside drivers/ is better to move the pwm.c driver to drivers/timers. The pwm.h header was moved to include/nuttx/timers to keep consistency, so all files referencing it need to be updated. 2019-09-02 07:57:10 -06:00
Gregory Nutt
19e1db3f97 arch/arm/src/stm32/hardware/stm32_adc_*: Additional coding standard issues: Binary operators should be separated with spaces. 2019-08-31 17:54:38 -06:00
Gregory Nutt
97a71db3b1 arch/arm/src/stm32/hardware/stm32_adc_*: Clean up some coding standard issues. 2019-08-31 17:45:32 -06:00
Gregory Nutt
5f57b85438 arch/arm/src/stm32/stm32_adc.c: Another fix. adc_calibrate was called even when it was conditioned out, causing a link time failure. 2019-08-31 17:12:15 -06:00
Gregory Nutt
70fcf486a0 arch/arm/src/stm32/stm32_adc.c: Corect an error found in build testing. Recent commit to add STM32F1 calibration was not properly conditioned. Caused compilation errors on all STM32 F2 family members. 2019-08-31 17:06:24 -06:00
Gregory Nutt
e5c3874a3b Tiva directories: Fix TM4C129XNCZAD part number in Kconfig and identifiers. Rationale: Fully specify that this is the 212-pin BGA package (ZAD ending) and for consistency with earlier changes to other Tiva TM4C12x part numbers in Kconfig names and identifiers. 2019-08-30 08:46:57 -06:00
Matous Pokorny
2236916be6 arch/arm/src/stm32/stm32_adc.c: Add ADC calibration procedure for IP_ADC_V1. Tested on STM32F100, and it magically increased result accuracy. STM32F103 has the same calibration procedure. I am not sure about others. 2019-08-29 19:01:22 -06:00
Jukka Laitinen
938e8b4ce7 arch/arm/src/stm32h7/stm32_ethernet.c: Correct memory corruption error. The Ethernet driver initialization incorrectly wrote to DMACRXCR instead of DMACSR when trying to clear the stopped flags. This caused invalid buffer length in the DMACRXCR, causing DMA to overflow the RX buffers when large packets are sent to the device. 2019-08-28 08:42:41 -06:00
Jukka Laitinen
cf5c02aa4e arch/arm/src/stm32h7/stm32_ethernet.c: Correct stm32h7 mac address filtering. Correct the MAC address 0 register definition and remove the 'receive all' flag. Now the Ethernet driver only receives packets addressed to correct MAC. 2019-08-28 08:41:06 -06:00
Gregory Nutt
6c5b8a70a7 arch/arm/src/imxrt/hardware/imxrt_enc.h: Fix some errors in register bit definitions. Noted by Arie de Muijnck. 2019-08-28 08:11:10 -06:00
Markus Bernet
1726f79a0f arch/arm/src/stm32h7/stm32_ethernet.c: Fix some errors in Ethernet MAC configuration. 2019-08-28 08:06:45 -06:00
David Sidrane
8493312f00 arch/arm/src/stm32f7/stm32_sdmmc.c: Fix warning when DMA is not enabled. 2019-08-28 06:47:54 -06:00
Gregory Nutt
ac151e05e7 Fix warnings found in build testing. 2019-08-27 16:20:39 -06:00
Nicholas Chin
f40aac87e8 arch/arm/src/imxrt: Adds quadrature encoder driver for IMXRT. 2019-08-27 15:01:09 -06:00
David Sidrane
a3bea40c46 Merged in david_s5/nuttx/master_h7 (pull request #1025) 
stm32h7: bbsram issues causing no writes and  hardfaults

* stm32_pwr:Ensure data is flushed on backup domain access changes

* stm32h7:bbsram convince compiler to perform 32 bit write

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-26 18:34:25 +00:00
Alin Jerpelea
3806a01c5d Merged in alinjerpelea/nuttx (pull request #1024) 
noards: arm: cxd56xx: migrate common code

* boards: arm: cxd56xx: common: move boot to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move flash to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move I2C driver to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move uid to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move usbmsc to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56: add SPH

    The SPH is used by the ASMP implementation from the SDK.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-26 14:29:55 +00:00
Bernd Walter
f9e80c4a1e arch/arm/src/samd2l2/sam_i2c_master.c: Correct time calculation. 2019-08-26 08:08:56 -06:00
Michael Jung
decd07725f arch/arm/src/stm32/stm32_spi.c: TI Synchronous Serial Frame Format. The SPI macros on STM32 MCUs do support the Texas Instruments Synchronous Serial Frame Format protocol (TI protocol). Defined a new SPIDEV_MODETI and add support for it in stm32_spi.c. 2019-08-25 09:07:09 -06:00
Michael Jung
b395cde043 arch/arm/src/stm32: PLLI2S support for F427/F437. Enable support of the I2S Phase Locked Loop on STM32F427 and STM32F437 MCUs. 2019-08-25 09:01:35 -06:00
David Sidrane
e2d76e21d5 Merged in david_s5/nuttx/master_h7_typo (pull request #1023) 
stm32h7:Memory Map DBGMCU is @ 0x5c001000

Fixtypo

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-24 11:27:23 +00:00
David Sidrane
c7dab20318 Merged in david_s5/nuttx/master_h7 (pull request #1022) 
stm32h7:Memory Map DBGMCU is @ 0x5c001000

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-23 22:00:43 +00:00
Gregory Nutt
b3d609959c arch/arm/src/s32k1xx/hardware/s32k1xx_flexcan.h: Add an incomplete FlexCAN register definition header file. Still missing some bitfield definition. Also updates some README files. 2019-08-23 07:35:49 -06:00
Alin Jerpelea
6ecee7e403 Merged in alinjerpelea/nuttx (pull request #1021) 
boards: cxd56xx: add SCU sensors (2/2)

* boards: cxd56xx: add cxd56_bh1721fvc initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bh1745nuc initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bm1383glv initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bm1422gmv initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bmi160 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bmp280 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_kx022 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_lt1pa01 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_rpr0521rs initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_sensors initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56: add Backup Log driver

    The driver will be used to backup logs on crash.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: add crashlog driver

    Add Crashlog driver with support for reset on crash

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: move gs2200m initialization

    Move the board gs2200m initalization to the common board folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: move ili9340 initialization

    Move the board ili9340 initalization to the common board folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: move lpm013m091a initialization

    Move the board lpm013m091a initalization to the common board folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: typo fixes

    HEADER: Updates on file location
    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-23 13:28:35 +00:00
Gregory Nutt
686ef9b317 arch/arm/src/s32k1xx: Clocking logic was including the wrong 'clock name' files for the S32K11x family. 2019-08-22 10:57:28 -06:00
Gregory Nutt
50e56f1d50 arch/arm/src/s32k1xx/Kconfig: Remove a duplicate configuration setting. Noted by Fabio Balzano. 2019-08-22 10:22:40 -06:00
Gregory Nutt
04dda09ed1 arch/arm/src/s32k1xx/Kconfig: Add Ethernet configuration options that were supposed to have been included in a previous commit. 2019-08-21 17:43:36 -06:00
Nathan Hartman
92bf3bfece arch/arm/src/tiva/hardware/tm4c: Fix wrong description on define TIVA_1WIRE_BASE: Was "EEPROM and Key Locker" (same as the item above). Now "1-Wire Master Module." Make DMACTL symbols visible for TM4C123: Remove "#ifdef CONFIG_ARCH_CHIP_TM4C129" guard around UART DMA Control (DMACTL) symbols. These bits are valid on TM4C123 devices, as well as on TM4C129. Also, improve the comment on UART_DMACTL_DMAERR. 2019-08-21 17:41:24 -06:00
Gregory Nutt
962ccb0f68 arch/arm/src/s32k1xx: This is a rough port of the i.MXRT Ethernet driver to the S32K1xx. The i.MXRT uses the same IP. Completely untested at this point. 2019-08-21 17:33:54 -06:00
Gregory Nutt
b4ee19f5bd arch/arm/src/s32k1xx: This commit brings in the LPSPI and LPI2C peripheral drivers from the i.MXRT which used the identical IP. 
Squashed commit of the following:

    arch/arm/src/s32k1xx:  Update peripheral input clocking for the way that things are done for the S32K1XX.  Fix other misc. compilation/configuration issues.

    arch/arm/src/s32k1xx:  Clean up LPSPI and LPI2C naming for S32K1XX.  Using S32K1XX clock functions to get peripheral input clock.

    arch/arm/src/s32k1xx:  Clone i.MXRT LPSPI and LPI2C support.  i.MXRT uses the same IP as S32K1XX.
 2019-08-21 11:18:40 -06:00
Nathan Hartman
be5a40c656 Fix typos in comments. 2019-08-21 09:32:59 -06:00
Ivan Ucherdzhiev
19c070e0d1 drivers/mmcsd: Added support for MMC(eMMC) bigger than 2 GB (Tested with IMXRT1050EVKB and samsung eMMC 16GB). arch/arm/src/imxrt: IMXRT uSDHC driver cmd line reset logic modified. 2019-08-21 09:23:29 -06:00