Several licenses were missed in the initial work
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
David Sidrane has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
arch/arm/include/kinetis/kinetis_pmc.h:
* Fix several typos in comments.
* Rewrap some comment lines.
* Fix define KINETIS_PMC_VERSION_UKN: Put -1 in
parenthesis for safety.
* Fix nxstyle complaint regarding long line.
Author: Gregory Nutt <gnutt@nuttx.org>
arch/arm/src/kinetis: Cosmetic changes from review of coding standard.
Author: David Sidrane <david_s5@nscdg.com>
Merged in david_s5/nuttx/master_kinetis (pull request #710)
kinetis:Add DMA and use it as RX FIFOs on Serial
* Add initial implementation of the DMA
* Add across Kxx family support [WIP]
* Incorporate the DMA into the serial
Add polling to serial
do DMA initialisation at UART startup and fix DMA mux setting.
Fix circular DMA handling in the serial driver.
* Adapt defconfig to enable UART1,4 RXDMA
* [WIP] - refactor this with new CONFIG DMA settings
* kinetis/Kconfig:Bring inline with upstream stucture
1. Use the Serial console configuration from drivers/serial/Kconfig
and friends.
2. Prefix arch specific featurs as such
UARTx_RXDMA->KINETIS_UARTx_RXDMA
* Kinetis:Serial formatting and clean up
* kinetis:DMA Formating and Cleanup
* kinetis:serial Use cleaner DMA API
* kinetis:Make.defs fix duplicate/errant kinetis_dma.o
* kinetis:serial Fix warning/error on only one uart using DMA
The driver can support no DMA on any UART, DMA on some
UARTs or DMA on all UARTs.
In the case of no DMA we disable the DMA based variables
and logic. In the case of all DMA we disable the non
DMA variables and logic, and in the mixed case both
DMA and non DMA variable and logic are enabled.
* kinetis:dma config fix formatting
* kinetis:chip/dma fix formatting
* kinetis:DMA config assume Unknown
Assume KINETIS_DMA_VERSION_UKN for all SoC not versioned
This is as the code was in nuttx prior to this commit
* kinetis:DMAMUX contain versioning- use HAS pattern define Unknown
The pattern for chip versioning is to define 'HAS' constants.
Define KINETIS_DMAMUX_HAS_MONOTONIC_CHCFG to contain the
version numbers to the include soc header and use that define
in the chip headers.
Define the KINETIS_DMAMUX_VERSION_UKN for the default as prior
this commit addressing was by default monotonic for CHCFG
* freedom-k66f:Disable Serial RXDMA
The application has to add calling of the kinetis
serial dma poll as it is application specific.
Approved-by: GregoryN <gnutt@nuttx.org>
configs/freedom-k28f: Add button and LED support.
arch/arm/src/kinetis: Fix a couple of additional compile problems.
arch/arm/src/kinetis/chip and configs/freedom-k28f: Add things needed for a successful build. Still need board LED definitions.
Squashed commit of the following:
arch/arm/src/kinetis: Add K28F memory map.
arch/arm/src/include/kinetis and src/kinetis: Add basic chip features and interrupt-related definitions for the K28F
The motvations is to version the IP blocks of the Kinetis
K series family of parts.
This added versioning and configuration features for the
Kinetis PMC IP block.
It is envisioned that in the long term as a chip is added.
The author of the new chip definitions will either find
the exact configuration in an existing chip define and
add the new chip to it Or add the PMC fature configuration
#defines to the chip ifdef list in
arch/arm/include/kinetis/kinetis_pmc.h In either case the
author should mark it as "Verified to Document Number:"
taken from the reference manual.
The version KINETIS_PMC_VERSION_UKN has been applied to
most all the SoCs in the kinetis arch prior to this commit.
The exceptions are the CONFIG_ARCH_CHIP_MK60FN1M0VLQ12,
CONFIG_ARCH_CHIP_MK20DXxxxVLH7 All K64 and K66 have ben
Verified PMC configurations.
The motvations is to version the IP blocks of the Kinetis
K series family of parts.
This added versioning and configuration features for the
Kinetis SIM IP block.
It is envisioned that in the long term as a chip is added.
The author of the new chip definitions will either find
the exact configuration in an existing chip define and
add the new chip to it Or add the SIM feature configuration
#defines to the chip ifdef list in
arch/arm/include/kinetis/kinetis_sim.h In either case the
author should mark it as "Verified to Document Number:"
taken from the reference manual.
The version KINETIS_SIM_VERSION_UKN has been applied to
most all the SoCs in the kinetis arch prior to this commit.
The exceptions are the CONFIG_ARCH_CHIP_MK60FN1M0VLQ12,
All K64 and K66 which not have Verified SIM configurations.
The motvations is to version the IP blocks of the Kinetis
K series family of parts.
This added versioning and configuration features for the
Kinetis MCG IP block.
It is envisioned that in the long term as a chip is added.
The author of the new chip definitions will either find
the exact configuration in an existing chip define and
add the new chip to it Or add the MCG feature configuration
#defines to the chip ifdef list in
arch/arm/include/kinetis/kinetis_mcg.h In either case the
author should mark it as "Verified to Document Number:"
taken from the reference manual.
The version KINETIS_MCG_VERSION_UKN has been applied to
most all the SoCs in the kinetis arch prior to this commit.
The exceptions are the CONFIG_ARCH_CHIP_MK60FN1M0VLQ12,
All K64 and K66 which not have Verified MCG configurations.
