sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5,884 Commits 1 Branch 0 Tags 291 MiB
099990f3da
Commit Graph

404 Commits

Author SHA1 Message Date
Gregory Nutt
33ac85adcb Adds architecture support for the STM32F372 and F373 (no board support yet). Only tested on STM32F373CC, but should work on the rest. Contributed by Marten Svanfeldt. 2015-03-02 10:33:42 -06:00
Gregory Nutt
2d91128111 Tiva GPIO clean-up by Calvin Maguranis 2015-02-20 13:40:25 -06:00
Gregory Nutt
a0a553f3e9 Tiva: Move GPIIO prototypes out of arch/arm/include/tiva/irq.h to arch/arm/tiva/tiva_gpio.h where they belong 2015-02-20 13:31:43 -06:00
Gregory Nutt
d1fa95ffc3 Merge commit 'd000b0ac237cb6b17e3d355b55250c3ca7e9f2d6' 2015-02-11 18:07:03 -06:00
sauttefk
7384d3bd79 Add TI EK-TM4C1294XL launchpad support 2015-02-12 00:30:38 +01:00
Gregory Nutt
24e51794f9 Kinetis: Add architectural support for the K26Z128VLH4. From Derek B. Noonburg 2015-02-11 07:15:45 -06:00
Gregory Nutt
d8561fbcae Remove execute privileges from some header files 2015-02-01 06:24:18 -06:00
Gregory Nutt
4510be6c7d Tiva Interrupts: Changes corresponding to the last needed in the Tiva Kconfig file as well 2015-01-12 10:14:48 -06:00
Gregory Nutt
9e546ff37a Tiva interrupts: Fix chip-specific interrupt un-definitions 2015-01-12 10:00:42 -06:00
Gregory Nutt
28a52cbd23 TM4C129X Timer: Update addresses in the timer register definitions file. Still missing bit field definitions 2015-01-07 08:57:48 -06:00
Gregory Nutt
16a302e732 STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review 2014-12-19 14:52:17 -06:00
Gregory Nutt
aabd4c59a3 Tiva: Change negative logic CONFIG_TIVA_DISABLE_GPIOx_IRQS to positive logic CONFIG_TIVA_GPIOx_IRQS 2014-12-18 15:19:16 -06:00
Gregory Nutt
83c56151ab Tiva: Add GPIO interrupt support for the TMS4C129X 2014-12-18 11:52:06 -06:00
Gregory Nutt
a719e75851 DK-TM4C129X: Fixes to get clean build. Logic is still not complete, however 2014-12-18 08:24:24 -06:00
Gregory Nutt
aa724ea75b Add interrupt definitions for the TM4C129X 2014-12-17 08:19:23 -06:00
Gregory Nutt
1410a650e0 Tiva: Better distinguish features of the TM4C1294xx and the TM4C129Xxx 2014-12-16 18:02:59 -06:00
Gregory Nutt
29d23ae626 Remove packaging indications for TM4C129 configuration variables 2014-12-16 16:22:52 -06:00
Gregory Nutt
188e092398 Add TM4C129XNCZAD and TM4C1294NCPDT to the Tiva configuration system 2014-12-16 16:02:21 -06:00
Gregory Nutt
0ad88d9664 Enable support for STM32F102. https://github.com/PX4/NuttX/pull/28.diff 2014-11-27 06:12:35 -06:00
Gregory Nutt
f4be851b0e Remove the definition of INT_FAST32_MIN which is already defined in stdint.h (the correct location). From Lorenz Meier. 2014-11-12 07:47:37 -06:00
Gregory Nutt
c65372b80c Support for the STM32F103RG. From Murilo Ponte 2014-11-10 07:48:46 -06:00
Gregory Nutt
9051ffd638 STM32GG Starter Kit: Add basic NSH configuration 2014-11-03 16:58:22 -06:00
Gregory Nutt
de5c451a30 Add empty file for event EFM32 clock configuration logic 2014-10-18 15:22:11 -06:00
Gregory Nutt
1bfec65ac5 More framework for GPIO interrupt support 2014-10-18 14:05:07 -06:00
Gregory Nutt
2bafdf3d59 Add EFM32 interrupt vector defintions 2014-10-17 10:34:39 -06:00
Gregory Nutt
895cfe0e7c Add configuration support for the EFM32 Gecko Starter Kit 2014-10-17 09:25:52 -06:00
Gregory Nutt
a835387529 Fix file mode on modified files 2014-10-14 15:45:56 -06:00
Gregory Nutt
56841b9e20 Support for the STM32 F411RE from Serg Podtynnyi 2014-10-14 15:42:28 -06:00
Gregory Nutt
df26163f1f Add logic necessary to handler remapping of shared memory on contex switches 2014-09-23 13:19:30 -06:00
Gregory Nutt
9aae0adffa If we are configured to use a kernel stack while in SYSCALL handling, then we need to switch back to the user stack to deliver a signal 2014-09-15 11:38:48 -06:00
Gregory Nutt
946b916f69 Initial integration of kernel stack (does not work) 2014-09-14 11:19:34 -06:00
Gregory Nutt
16ddffc941 Add the initial implementation of the process kernel stack logic. Not yet integrated into the main OS logic nor tested. 2014-09-14 09:53:54 -06:00
Gregory Nutt
ffff51c1b1 Rename everything associated with the dynamic process stack to ustack to make room in the name space for a kstack 2014-09-14 09:10:09 -06:00
Gregory Nutt
f4bcb27962 Add a configuration option for dynamic stack management 2014-09-13 12:25:32 -06:00
Gregory Nutt
1f23ad9bad Misc fixes to repair some of the breakage to the SAMA5D4-EK elf configuration caused by changes for the knsh configuration 2014-09-11 10:31:12 -06:00
Gregory Nutt
006cf7d745 Add logic to initialize the per-process user heap when each user process is started 2014-09-10 15:55:36 -06:00
Gregory Nutt
12775801c9 Add support for delivery of use-mode signals in the kernel build. 2014-09-02 15:58:14 -06:00
Gregory Nutt
587520a7d2 Completes the implementation of sbrk() (untested) 2014-09-01 10:46:51 -06:00
Gregory Nutt
e11679acf8 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
db69d94935 Fix ARM7/9 and Cortex-A SYSCALLs: For threads in SVC mode, the SVC instructions clobbers R14. This must be taken account in the inline assembly 2014-08-29 10:07:11 -06:00
Gregory Nutt
8dd679e875 ARMv7-A: Add SYSCALL handling logic 2014-08-28 14:52:14 -06:00
Gregory Nutt
cbf0141d6c Add an ARMv7-A system call definition header file 2014-08-28 13:21:36 -06:00
Gregory Nutt
e3258a3b1f Support the the TC3200 from Jim Ewing 2014-08-26 15:13:57 -06:00
Gregory Nutt
cb8e081dba Mostly cosmetic use of uintptr_t to hold addresses instead of uint32_t 2014-08-26 10:44:10 -06:00
Gregory Nutt
699a54a022 Misc changed to get the SAMA5 ELF configuration with address environments working 2014-08-25 13:28:13 -06:00
Gregory Nutt
8907616478 Cortex-A/SAMA5 address environment support is code complete (untested) 2014-08-25 11:18:32 -06:00
Gregory Nutt
95c79c675c Add addrenv.h; First cut at Cortex-A address environment structures; Add configuration options to setup address enviornment 2014-08-24 09:57:53 -06:00
Gregory Nutt
b01d3e396e STM32 F401: Only 3 USARTS, but need to set STM32_NUSARTS to six because they are not numbered sequentially 2014-08-22 09:02:58 -06:00
Gregory Nutt
511d7bb38a Adds support for localtime. From Max Neklyudov 2014-08-12 06:18:22 -06:00
Gregory Nutt
3010eddf11 STM32: Add configuration support fort he STM32F103RC. From Kosma Moczek 2014-06-30 08:16:17 -06:00
Gregory Nutt
48e6f0ba78 STM32: Move temperature ranges from chip selection configuration prompts. From Kosma Moczek 2014-06-30 08:09:19 -06:00
Gregory Nutt
fae790a6dc Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
Gregory Nutt
0a134f0158 Need to enable FIQ in initial task state; Improve H32/64 test in IRQ handling 2014-06-21 09:55:09 -06:00
Gregory Nutt
c68d2532be SAMA5D4: Add support for secure/FIQ interrupts; SAIC supports need to be be enabled unconditionally 2014-06-20 18:16:41 -06:00
Gregory Nutt
9e7eb2d12d SAMA5D4: Fix some memory remapping issues; updates to comments and README files 2014-06-14 08:02:58 -06:00
Gregory Nutt
ab79090ce0 SAMA5D4: Initial XDMAC driver logic; initial check-in is little more the the DMAC driver with some name changes 2014-06-12 16:33:04 -06:00
Gregory Nutt
379f516780 SAMA5D3/4: More renaming. Change SAMA5D3 EMAC to EMACA and SAMA5D4 to EMACB so that the configuration and build system can configure them. I might come up with something better later 2014-06-10 17:40:25 -06:00
Gregory Nutt
07c731d2bb SAMA5D4: Various changes to get the SAMA4D-EK to build 2014-06-06 15:39:40 -06:00
Gregory Nutt
77c487b1ed SAMA5D4: Has two XDMA modules 2014-06-04 14:39:52 -06:00
Gregory Nutt
41032b021b SAMA4D4: Basic framework to support the SAMA4D4. Not yet complete 2014-06-03 17:49:51 -06:00
Gregory Nutt
8dbc4714c5 Change all variadic macros to C99 style 2014-05-22 09:01:51 -06:00
Gregory Nutt
9e941f1195 Change bne to bne.n in irqrestore() 2014-05-22 09:01:25 -06:00
Gregory Nutt
fb774d677c Add an alternate STM32 I2C driver that works around errata in the F103 chip (and maybe others). From Patrizio Simona 2014-05-14 07:48:47 -06:00
Gregory Nutt
697b0d5b61 correct some columnar alignment and spacing 2014-05-13 14:14:57 -06:00
Gregory Nutt
02bb1d69b8 Add support for the STM32152 and STM32162 Medium+ density parts (plus miscellaneous other improvements to the original STM32151 logic). From Jussi Kivilinna and Sami Pelkonen 2014-05-08 09:20:11 -06:00
Gregory Nutt
6e9df4d5ab STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent 2014-05-07 12:54:27 -06:00
Gregory Nutt
bfa9df89e2 STM32: Add more complication to STM32 Kconfig so the correct ADC and CAN options presented for the F401RE. There are still invalid peripheral options being presented 2014-05-06 08:32:21 -06:00
Gregory Nutt
8be212ccc3 Nucleo-F401RE: Fix memory usage 2014-04-30 08:20:30 -06:00
Gregory Nutt
162662a290 Add support for the STM32F041RE and for the Nucleo-F401RE board. From Frank Bennett 2014-04-20 13:42:23 -06:00
Gregory Nutt
a1b862580b Fix an error introduced in the last commit 2014-04-19 07:54:52 -06:00
Gregory Nutt
25d4ff745b More trailing whilespace removal 2014-04-13 16:22:22 -06:00
Gregory Nutt
73f0ff6c47 Documentatin updated; fix errors in some comments 2014-03-28 09:52:07 -06:00
Gregory Nutt
1b11e89c25 Add support for the SAMA5D36 2014-03-28 08:33:01 -06:00
Gregory Nutt
f613048460 SAM3/4: Rename CONFIG_GPIO*_IRQ to CONFIG_SAM34_GPIO*_IRQ 2014-03-23 15:51:34 -06:00
Gregory Nutt
c35470d553 TM4C123G Launchpad: Corrected processor configuration from Daniel Pereira de Carvalho 2014-03-18 11:21:31 -06:00
Gregory Nutt
483fcdca03 SAM3/4: Integrate the SPI DMA interface with the existing code. Does not yet work. 2014-03-13 15:54:09 -06:00
Gregory Nutt
6638022126 SAM4E-EK: Add basic board support 2014-03-10 15:18:46 -06:00
Gregory Nutt
b25d2ace89 TM4C: A few more changes to get a clean compilation 2014-03-10 11:54:20 -06:00
Gregory Nutt
7ac3ada62a TM4C: Add definitions for GPIO interrupts 2014-03-09 10:00:31 -06:00
Gregory Nutt
9889391ab8 Oop.. everything was named TM3C instead of TM4C in the last check-in 2014-03-09 09:26:29 -06:00
Gregory Nutt
b10bc3238b TM3C123: Add chip characteristics and interrupt definition files 2014-03-09 09:21:06 -06:00
Gregory Nutt
6cd5f3d321 functions and definitions renamed from lm_ to tiva_ 2014-03-08 15:50:26 -06:00
Gregory Nutt
88c2da5bc1 The old lm/ directories were enamed tiva/ to better support new products coming down the pipe from TI 2014-03-08 12:31:06 -06:00
Gregory Nutt
d20d82b90e SAM4E: Update SAM3/4 EEFC, MATRIX, and PMC register definition header files 2014-02-24 09:49:02 -06:00
Gregory Nutt
36ead78f07 ARMv6-M/ARMv7-M: Correct a register handling error in signal delivery (Kernel build mode only). Noted by Mike Smith. 2014-02-23 08:25:49 -06:00
Gregory Nutt
159938e6d8 SAM4E: Add vector definition header files 2014-02-21 08:46:16 -06:00
Gregory Nutt
2ec06dc52f SAMD20: Beginning of SERCOM UART configuration logic 2014-02-15 14:22:56 -06:00
Gregory Nutt
eb769a9a0d Minimal changes to get a clean compilation of the SAMD20 Xplained configuration. Still a lot of missing logic 2014-02-13 09:14:03 -06:00
Gregory Nutt
6fea68c36e Add basic framework to support the Atmel SAMD Cortex-M+ chip 2014-02-12 15:07:11 -06:00
Gregory Nutt
05cf59feef Fix typo cloned to many files: SAM32 vs SAM34 2014-02-12 13:00:24 -06:00
Gregory Nutt
26b7316609 Remove support for EFM32. Not ready to be fielded 2014-01-27 08:03:39 -06:00
Gregory Nutt
07d12a800d Basic support for the EFM32 processor family from Richar Cochran 2014-01-23 07:56:10 -06:00
Gregory Nutt
162e240ed3 Fix STM32F103VE SPI3 definitions; Fix bug introduced in recent NX reorganization. From Steve Redler IV 2014-01-08 16:44:11 -06:00
Gregory Nutt
0673a9564c Oops. Mnemonic changed from SWI to SVC in cortex A 2014-01-05 15:59:49 -06:00
Gregory Nutt
b9816723a5 Add ARMv7-A syscall.h header file 2014-01-05 15:49:06 -06:00
Gregory Nutt
29c43b0b24 Fixes a few more high priority, nested interrupt logic 2013-12-23 11:13:56 -06:00
Gregory Nutt
3855ce04e8 Beginning of high priority nested interrupt support for the ARMv7-M family 2013-12-21 11:03:38 -06:00
Gregory Nutt
41ce419ebc A10: Timer interrupt handler 2013-12-13 12:42:26 -06:00
Gregory Nutt
7076b5ac51 A10+pcDuino: PIO support, LED and button support 2013-12-11 13:23:40 -06:00
Gregory Nutt
69710d1657 A10 peripheral selection logic 2013-12-09 15:24:54 -06:00
Gregory Nutt
1a8d5b343c Add A10 interrupt numbers 2013-12-08 11:49:39 -06:00
Gregory Nutt
641767965b A10 interrupt logic 2013-12-08 10:18:28 -06:00
Gregory Nutt
d460e8d7fa Add basic directory structure to support the Allwinner A10 2013-12-07 13:06:34 -06:00
Gregory Nutt
c615f6e6fd Support for the Atmel SAM4E family. From Mitko 2013-11-11 07:45:09 -06:00
Gregory Nutt
893f36c061 Support for the STM32F429 from Ken Pettit 2013-11-07 16:47:43 -06:00
Gregory Nutt
eb648c585b Add support for the STM32F207ZE chip. From Martin Lederhilger 2013-10-24 08:25:05 -06:00
Gregory Nutt
b885459624 Add framework for Spark Core board support. The initial commit is a clone of the Maple Mini and still needs Spark customizations 2013-10-02 08:24:46 -06:00
Gregory Nutt
a55dda98b3 Add hooks to select Cortex-A8 2013-08-27 08:46:37 -06:00
Gregory Nutt
8194e6bbcf SAMA5: Add DMA suppport (untested) 2013-08-04 10:44:18 -06:00
Gregory Nutt
8695c89aa4 SAMA5: Modification of some CPSR-related inline functions 2013-07-31 09:11:24 -06:00
Gregory Nutt
b75a0cf8be Add ARMv7-A irqdisable() inline function 2013-07-30 11:37:09 -06:00
Gregory Nutt
cb3f394d53 Improve some ARMv7-A/M floating point register save time; Add floating point register save logic for ARMv7-A 2013-07-23 17:52:06 -06:00
Gregory Nutt
ca9b52b07f SAMA5/Cortex-A: Improve irqsave/restore inlines + add irqenable. Add skeleton file for SAMA5 interrupt management. Also change from last commit that was left in the editor 2013-07-21 17:08:40 -06:00
Gregory Nutt
0b46176b43 A few more Cortex-A5 and SAMA5 files 2013-07-21 12:52:38 -06:00
Gregory Nutt
137cd94b6a Basic framework to support the AT91SAMA5D3 family and the SAMA5D3x-EK board(s) in particular 2013-07-19 15:23:03 -06:00
Gregory Nutt
28a90ba46d Some initial frame for Cortex-A5 support. No much yet 2013-07-18 15:20:47 -06:00
Gregory Nutt
91313feac2 NSH cmp command by Andrew Twidgell 2013-07-18 08:24:29 -06:00
Gregory Nutt
8f41963efd With these changes the Arduino Due port builds without errors 2013-06-27 15:07:07 -06:00
Gregory Nutt
2ecac742b6 Flesh out the Arduino Due board configuratino and integrate it with the build and configuration system 2013-06-27 14:24:27 -06:00
Gregory Nutt
77b36e0bc1 Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port 2013-06-26 18:46:44 -06:00
Gregory Nutt
8865cf8be0 Add SAM3X/3A interrupt vectors 2013-06-26 12:59:56 -06:00
Gregory Nutt
2812f5be67 Add support for SAM3X and 3A chips, interrupts, and peripheral IDs 2013-06-26 12:28:32 -06:00
Gregory Nutt
e6a3078b77 Add support for a generic windows-based EABI toolchain; Add NX configuration to force default NXTK border colors 2013-06-13 11:04:18 -06:00
Gregory Nutt
677365210e SAM4S: Add NSH configuration. Calibrated delay loops. Port now seems fully functional 2013-06-12 10:56:42 -06:00
Gregory Nutt
ea776434ba Changes for a clean build of configs/sam4s-xplained 2013-06-11 17:33:43 -06:00
Gregory Nutt
93ee6cb291 SAM4S: Add pin multiplexing definitions 2013-06-11 14:32:07 -06:00
Gregory Nutt
3fb47dae74 SAM4S: GPIO, chip characteristics, peripheral Kconfig 2013-06-11 12:28:31 -06:00
Gregory Nutt
6576156731 SAM4S: Add memory map and interrupt logic 2013-06-10 16:18:47 -06:00
Gregory Nutt
77f84ae94d Add a skeleton configuration that will eventually support the SAM4L Xplained Pro board 2013-06-03 15:11:56 -06:00
Gregory Nutt
9e8ed732da Add vector and chip cability definitions for the SAM4L family 2013-06-03 11:23:41 -06:00
Gregory Nutt
d4b3514c85 Add interrupt and memory map definitions for the AT91SAM4L 2013-06-03 09:32:04 -06:00
Gregory Nutt
e9859095dc Rename sam3u/ architecture directories to sam34/ to include the SAM4L 2013-06-02 13:57:22 -06:00
Gregory Nutt
308e3f528d Move SAM3U header files to arch/arm/src/sam3u/chip. Some renaming of SAM3U to SAM to ssupport SAM4. Convert all configs/sam3u-ek configurations to use the kconfig-frontends tool 2013-06-02 10:33:57 -06:00
Gregory Nutt
297751897a STM32F103C4 and F103C8 chip support from Laurent Latil 2013-05-28 14:09:44 -06:00
Gregory Nutt
d32417043f Support for STM32L15xx interrupt vectors 2013-05-18 12:56:03 -06:00
Gregory Nutt
3eae56467b Begnning of support for the STM32L15X family 2013-05-18 11:15:37 -06:00
Gregory Nutt
bf21a8f790 Make Pirelli-DLP10 a true board configuration; Calypso no compiles without errors 2013-05-05 09:10:47 -06:00
Gregory Nutt
5cd86229a8 KL25Z: Fix some memory mapp and register definitions; no UART3-5 2013-04-25 09:06:58 -06:00
Gregory Nutt
e32eaec34a Fix typo in the STM32 F IRQ file -- from Paul Zhang 2013-04-17 20:27:43 -06:00
Gregory Nutt
a8004f9e07 Fix major misthink in Cortex-M0 port: The Cortex-M0 has no BASEPRI register. We have to revert to using the nasty PRIMASK register 2013-04-16 18:00:59 -06:00
Gregory Nutt
9da8869efc Fix KL25Z interrupt enable/disable logic 2013-04-16 14:54:08 -06:00
Gregory Nutt
5334562196 Initial support for the Kinetis L family and the Freedom KL25Z board from Alan Carvalho de Assis 2013-04-16 08:48:42 -06:00
Gregory Nutt
1a07e950ea Move LPC17xx IOCON register definitions from lpc17_gpio.h to lpc17_iocon.h; fix a few more .gitignore files 2013-04-04 18:12:44 -06:00
Gregory Nutt
1694955188 Clone svn:ignore directory atributed to .gitignore files 2013-04-04 14:27:29 -06:00
patacongo
c4dbaf3d2a Several fixes for LPC1788 GPIO 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5813 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-03 19:35:21 +00:00
patacongo
370913df84 Add support for STM32 F427/437 chips. From Mike Smith 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5807 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-01 13:43:31 +00:00
patacongo
3e7db57403 Rework of kernel build signal dispatch to user-space handlers 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5778 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-23 14:46:02 +00:00
patacongo
4d3d2f2112 A few fixes related to dispatched signals in kernel mode (there are still issues) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5777 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-22 21:59:05 +00:00
patacongo
87bb6ceb5b Fix syscall parameter passing for the case where the number of parameters is >4 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5767 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-21 00:25:17 +00:00
patacongo
0df69d1de3 LPC1788 SD Card driver updates from Rommel Marcelo 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5753 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-17 23:40:53 +00:00