chao an
e942a7c55e
build/Kconfig: fix warnings detected by kconfiglib
...
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-09 20:07:46 +08:00
chao an
3a0fdb019d
nuttx: replace all ARRAY_SIZE()/ARRAYSIZE() to nitems()
...
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-09 20:05:44 +08:00
raiden00pl
18cf2c4297
boards/stm32f4discovery: add nxscope CDCACM example
2023-02-08 10:06:59 +08:00
Ville Juven
09e7987121
sched/addrenv: Fix system crash when process group has been deleted
...
There is currently a big problem in the address environment handling which
is that the address environment is released too soon when the process is
exiting. The current MMU mappings will always be the exiting process's, which means
the system needs them AT LEAST until the next context switch happens. If
the next thread is a kernel thread, the address environment is needed for
longer.
Kernel threads "lend" the address environment of the previous user process.
This is beneficial in two ways:
- The kernel processes do not need an allocated address environment
- When a context switch happens from user -> kernel or kernel -> kernel,
the TLB does not need to be flushed. This must be done only when
changing to a different user address environment.
Another issue is when a new process is created; the address environment
of the new process must be temporarily instantiated by up_addrenv_select().
However, the system scheduler does not know that the process has a different
address environment to its own and when / if a context restore happens, the
wrong MMU page directory is restored and the process will either crash or
do something horribly wrong.
The following changes are needed to fix the issues:
- Add mm_curr which is the current address environment of the process
- Add a reference counter to safeguard the address environment
- Whenever an address environment is mapped to MMU, its reference counter
is incremented
- Whenever and address environment is unmapped from MMU, its reference
counter is decremented, and tested. If no more references -> drop the
address environment and release the memory as well
- To limit the context switch delay, the address environment is freed in
a separate low priority clean-up thread (LPWORK)
- When a process temporarily instantiates another process's address
environment, the scheduler will now know of this and will restore the
correct mappings to MMU
Why is this not causing more noticeable issues ? The problem only happens
under the aforementioned special conditions, and if a context switch or
IRQ occurs during this time.
2023-02-08 02:51:23 +08:00
raiden00pl
ca95d592d3
boards/stm32f4disco: add timer driver support
2023-02-08 02:43:13 +08:00
chao an
caa16742db
rp2040/raspberrypi-pico-w: update submodule to avoid invaild firmware
...
The cyw43-driver is a submodule in the pick-sdk, if the submodule is
not updated, the dummy firmware driver will be used, update the document
to correct the setup flow.
${PICO_SDK_PATH}/lib/cyw43-driver/firmware/43439A0-7.95.49.00.combined
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 04:40:38 +08:00
chao an
5c047f634f
raspberrypi-pico-w/telnet: enable more configs
...
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 04:40:38 +08:00
Masayuki Ishikawa
25a6448a1a
boards: sabre-6quad: Update README.txt
...
Summary:
- This commit updates README.txt regarding QEMU with DEBUG_ASSERTIONS=y
Impact:
- None
Testing:
- Tested with QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-02-06 18:26:05 +08:00
Masayuki Ishikawa
50989430cd
boards: sabre-6quad: Enable DEBUG_ASSERTION in citest
...
Summary:
- Since QEMU does not report L2CC information correctly,
NuttX stops if DEBUG_ASSERTIONS=y.
- This commit adds DEBUG_ASSERTIONS=y to citest/defconfigs
and disables L2CC related configs.
- Also, it disables RAMLOG to show the crash information
Impact:
- None
Testing:
- Tested with QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-02-06 18:26:05 +08:00
wangbowen6
f925e17f18
tlsr82/backtrace: tc32 backtrace bug fix
...
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
2023-02-04 18:25:58 -03:00
Xiang Xiao
df102d1f06
Remove OK macro from the code base
...
let's use OK from sys/types.h instead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-02-02 13:58:16 +01:00
Gustavo Henrique Nihei
e6b204f438
nuttx: Use MIN/MAX definitions from "sys/param.h"
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2023-02-01 23:47:44 +08:00
chao an
a045eb3c1d
arm/sama5/jupiter-nano: correct config name
...
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-01 22:36:42 +08:00
Xiang Xiao
9f027208d4
fs: Add model field to geometry and mtd_geometry_s
...
the model is very useful to track the device info
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-31 11:50:28 -03:00
David Vosahlik
372fee9412
Added SocketCAN driver implementation to the tiva chip, modified the EK-TC1294XL launchpad board to use the new SocketCAN API
2023-01-31 14:07:23 +08:00
Fotis Panagiotopoulos
2fe8f37001
Fixed non-UTF characters.
2023-01-30 20:08:03 +08:00
Masayuki Ishikawa
2ae8a9600f
boards: imxrt1060-evk: Fix iperf performance for netnsh
...
Summary:
- Before: iperf -s 94Mbps, iperf -c 0Mbps
- After : iperf -s 94Mbps, iperf -c 93Mbps
Impact:
- Should be none
Testing:
- Tested with iperf and telnet
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-01-30 13:25:15 +08:00
Masayuki Ishikawa
7af531f677
boards: sabre-6quad: Add netnsh_wb
...
Summary:
- This commits adds netnsh_wb which enables write buffers.
Impact:
- None
Testing:
- Tested with iperf (-s 205Mbps, -c 176Mbps) on QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-01-30 13:25:15 +08:00
Xiang Xiao
adc8cfc2be
boards/tlsr82: Enable CONFIG_LIBM since the toolchain doesn't provide libm
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-28 11:30:33 -03:00
Petro Karashchenko
af55d894f9
boards/spresense: remove BOARDIOC_SDCARD_SETNOTIFYCB ioctl
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-01-26 23:08:28 +08:00
duduita
2fc1192019
Add initial support to Meadow F7Micro board
2023-01-26 18:05:21 +08:00
Petro Karashchenko
a58e73add8
arch/arm/tiva: simplify TIVA_CAN option usage
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-01-26 10:26:09 +08:00
Petro Karashchenko
bd7cb522a1
nuttx: use TABs instead of spaces in Kconfig files
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-01-26 10:26:09 +08:00
Xiang Xiao
926e296d48
boards/jupiter-nano: Remove sam_ostest.c
...
since fpu special handling is done in arch common code now
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-25 23:01:20 +02:00
Xiang Xiao
99e89809d7
board: Pass the assertion expression to board_crashdump too
...
continue the follow work:
commit 43e7b13697
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Sun Jan 22 19:31:32 2023 +0800
assert: Log the assertion expression in case of fail
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-25 16:00:48 -03:00
Xiang Xiao
d7ee492fc4
board/arch: Remove FAR decorator
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-25 13:05:07 +02:00
Xiang Xiao
299de87e68
tiva/lm3s6965-ek: Remove CONFIG_DEBUG_ASSERTIONS from qemu-protected
...
to save the code size
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-24 15:00:19 -03:00
Alan Carvalho de Assis
eef1c4697e
nucleo-wl55jc: remove duplicated peripheral placed manually
2023-01-23 03:04:51 +08:00
Alan Carvalho de Assis
b730fff6c3
b-u585i-iot02a: Don't need to disable CONFIG_ARCH_LEDS
2023-01-23 03:04:51 +08:00
Alan Carvalho de Assis
f0289577bf
boards: Update all boards config after updating NSH_CMDPARMS
2023-01-23 03:04:51 +08:00
raiden00pl
d7e7990548
boards/b-g431b-esc1: support for BEMF sensing
2023-01-22 12:58:04 -03:00
Alan Carvalho de Assis
1c6dd7030f
stm32f4disco: Add support to mount /tmp
2023-01-22 22:54:45 +08:00
Xiang Xiao
6b1e0ad1c4
tm4c1294-launchpad/Kconfig: Fix warning: defaults for choice values not supported
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-19 08:21:35 +01:00
Masayuki Ishikawa
138f3faeef
boards: sabre-6quad: Adjust TCP and UDP configurations
...
Summary:
- This commit adjusts TCP and UDP configurations based on
sabre-6quad/configs/netnsh/defconfig
Impact:
- sabre-6quad only
Testing:
- Tested with QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-01-19 08:09:33 +01:00
Peter Bee
85f57fb50c
boards/arm/rp2040: add waveshare rp2040 lcd 1.28
...
Added board files and sample configs for waveshare-rp2040-lcd-1.28.
https://www.waveshare.com/wiki/RP2040-LCD-1.28
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2023-01-18 19:31:43 -03:00
Peter Bee
9deeae0dee
boards/arm/rp2040: add gc9a01 drivers
...
Added gc9a01 drivers to rp2040
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2023-01-18 19:31:43 -03:00
Peter Bee
5d08844413
boards/arm/rp2040: move duplicate peripheral configs to common
...
Kconfigs with same names in different files could not be handled
correctly
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2023-01-18 19:31:43 -03:00
David
c19b5eeb8d
Add support of CAN character device for tm4c1294 launchpad.
2023-01-18 12:15:53 +01:00
Xiang Xiao
1ea9db4ebe
Fix error: implicit declaration of function 'cp15_invalidate_icache'; did you mean 'cp15_invalidate_dcache'?
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-16 16:14:32 +08:00
Petro Karashchenko
74d5c3948d
boards/arm/cxd56xx/spresense: fix card detect status reading
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-01-13 12:18:36 +08:00
Petro Karashchenko
5f92c62874
boards/cxd56xx/spresense: add fs automount driver for SD Card
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-01-10 10:39:23 +09:00
yinshengkai
8c9e90882d
boards/stm32: remove up_perf_init from boardinitialize
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2023-01-06 13:32:12 +08:00
Xiang Xiao
b0a0ba3ad7
fs: Move mmap callback before truncate in [file|mountpt]_operations
...
since mmap may exist in block_operations, but truncate may not,
moving mmap beforee truncate could make three struct more compatible
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-04 17:43:59 +02:00
Xiang Xiao
779a610ca3
Remove the unnecessary NULL fields in global instance definition of file_operations
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-04 00:32:13 +02:00
Jukka Laitinen
f33dc4df3f
Change FIOC_MMAP into file operation call
...
- Add mmap into file_operations and remove it from ioctl definitions.
- Add mm_map structure definitions to support future unmapping
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2023-01-02 11:23:20 -03:00
Jukka Laitinen
41e9df2f3e
Add ftruncate into file operation calls
...
- Add truncate into file_operations
- Move truncate to be common for mountpt_operations and file_operations
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2023-01-02 11:23:20 -03:00
pengyiqiang
1c62181b0d
boards: adapt LVGL v8 defconfig
...
Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
2023-01-01 10:15:08 -03:00
Xiang Xiao
7322eafba7
drivers/usb: Fix the typo error in Kconfig
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-25 01:01:26 +02:00
Adam Feuer
a65ecf793c
Jupiter Nano support
...
- Adds support for the Starcat Jupiter Nano
SAMA5D27C-LD1G board
- https://github.com/starcat-io/jupiter-nano
- this board is very similar to the Microchip/Atmel
SAMA5D2-Xplained board (sama5d2-xult)
2022-12-24 12:04:33 +08:00
Peter van der Perk
aac9eb57e8
S32K3XX Progmem dataflash with littlefs support
2022-12-24 12:03:56 +08:00
Ville Juven
c2fa780ed0
boards/lpc17xx/lpc17_40_symtab: Remove ref. to nxsched_get_streams
...
I don't know how to handle this properly as I don't know what this
symbol table is supposed to do. Most likely the part that uses the
symbol table needs to be patched also...
2022-12-22 20:16:11 +08:00
Adam Feuer
e57d0312ca
Update SAMA5D2-XULT entry point
...
- in NuttX 11.x and 12.x the nuttx entry point
for the sama5d2-xult board changed to 0x20008E20
(from 0x2008040).
This change updates defconfigs and the README.txt
to reflect that.
- no code changes
2022-12-22 11:32:28 +08:00
Petro Karashchenko
b107e4f417
nuttx: unify MIN, MAX and ABS macro definition across the code
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-12-21 09:31:28 +08:00
Peter van der Perk
b5fd0b2381
S32K3XX MR-CANHUBK3 Add protected knsh support
2022-12-19 20:10:34 +08:00
GD32-MCU
659bd495b0
Add i2c driver for gd32f450 MCU
2022-12-17 17:12:26 +08:00
Petro Karashchenko
cc0ee12092
arch/arm/samv7: add ARCH_RAMVECTORS support
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-12-17 13:57:03 +08:00
zhangyuan21
632d87ee71
arch: remove up_release_pending function
...
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
2022-12-16 21:29:57 +08:00
Masayuki Ishikawa
548c417858
boards: sabre-6quad: Improve iperf performance
...
Summary:
- This commit improves iperf performance
- Also, adjusts CONFIG_IDLETHREAD_STACKSIZE
Impact:
- None
Testing:
- Tested with QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-12-16 09:49:11 -03:00
Peter van der Perk
6b3b5751c1
S32K automatically calculate size of periphclocks array
2022-12-13 19:50:01 +08:00
chao an
813dfe9756
spresense/rndis: set default throttle entries to 24 (2*MTU)
...
Reserve more throttle entries to avoid data discarded in NIC
Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-06 16:59:02 +09:00
Xiang Xiao
1f25da1366
boards: Remove the unused function prototype(slcd_getstream)
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-06 01:55:58 +08:00
Xiang Xiao
b526e06de1
drivers/lcd: Reuse lib_meminstream_s as much as possible
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-05 14:27:55 +01:00
Xiang Xiao
055f1f33eb
libc/stream: Rename [lib_stream_](put|get) to [lib_stream_](putc|getc)
...
to make the naming style consistent with each other
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-05 14:27:55 +01:00
okayserh
0dafa5f921
Added initial USB support for stm32f746g discovery.
2022-12-03 20:06:47 +08:00
Peter van der Perk
ec5030ebe6
S32K3XX RAM fixes MPU Dcache ECC
2022-12-01 08:00:32 -05:00
Masayuki Ishikawa
5215eb7e0f
boards: cxd56xx: Fix the build error in cxd56_crashdump.c
...
Summary:
- This commit fixes the build error in cxd56_crashdump.c
regressed by https://github.com/apache/nuttx/pull/7707
Impact:
- None
Tesing:
- Tested with spresense:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-11-28 08:18:47 +01:00
Xiang Xiao
6d30726a1b
Remove the unnecessary "return;" at the end of function
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-27 22:23:50 +01:00
Nathan Hartman
03802dad13
NuttX graduated the Incubator; update repository links
2022-11-26 11:58:15 -08:00
chao an
6d8c28a83c
boards/citest: disable NET_ARP for usrsocktest
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-24 20:54:18 +08:00
zhangyuan21
d8051ba979
nuttx/sched: merge up_block_task and up_unblock_task
2022-11-22 22:59:08 +08:00
Xiang Xiao
39338ce96c
boards: Refresh ursock related config
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-22 20:45:26 +09:00
Xiang Xiao
12b3a1ae56
Fix Error: board/stm32_ssd1289.c:310:12: error: converting the result of '<<' to a boolean always evaluates to true
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-22 11:38:41 +08:00
Xiang Xiao
88649d03ba
Fix Error: stm32_wm8994.c:198:54: error: format specifies type 'unsigned long' but the argument has type 'uint32_t' (aka 'unsigned int')
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-22 11:38:41 +08:00
chao an
624d69ee05
boards: enter/leave critical section should in pairs
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-22 08:19:24 +09:00
chao an
52235b468b
spresense/wifi: icmp/arp message should talk to GS2200M through usrsock
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-22 03:11:26 +08:00
chao an
01ec02380d
stm32f4discovery/wifi: icmp/arp message should talk to GS2200M through usrsock
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-21 22:13:52 +08:00
Xiang Xiao
30a01ab551
Fix Error: board/stm32_selectsram.c:163:13: error: shifting a negative signed value is undefined [-Werror,-Wshift-negative-value]
...
FSMC_BTR_ADDHLD(SRAM_ADDRESS_HOLD_TIME) |
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/arch/arm/src/chip/hardware/stm32_fsmc.h:164:42: note: expanded from macro 'FSMC_BTR_ADDHLD'
^
/github/workspace/sources/nuttx/arch/arm/src/common/arm_internal.h:135:54: note: expanded from macro 'putreg32'
^
Error: board/stm32_selectsram.c:166:13: error: shifting a negative signed value is undefined [-Werror,-Wshift-negative-value]
FSMC_BTR_CLKDIV(SRAM_CLK_DIVISION) |
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/arch/arm/src/chip/hardware/stm32_fsmc.h:176:42: note: expanded from macro 'FSMC_BTR_CLKDIV'
^
/github/workspace/sources/nuttx/arch/arm/src/common/arm_internal.h:135:54: note: expanded from macro 'putreg32'
^
Error: board/stm32_selectsram.c:167:13: error: shifting a negative signed value is undefined [-Werror,-Wshift-negative-value]
FSMC_BTR_DATLAT(SRAM_DATA_LATENCY) |
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/arch/arm/src/chip/hardware/stm32_fsmc.h:180:42: note: expanded from macro 'FSMC_BTR_DATLAT'
^
/github/workspace/sources/nuttx/arch/arm/src/common/arm_internal.h:135:54: note: expanded from macro 'putreg32'
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-21 17:39:04 +08:00
Xiang Xiao
81b9df53fc
Fix Error: board/dfu_signature.c:53:16: error: unknown attribute 'externally_visible' ignored
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-21 17:39:04 +08:00
Xiang Xiao
f2320a4a69
Fix board/stm32_lcd.c:584:14: error: converting the result of '<<' to a boolean; did you mean '(7 << (10)) != 0'?
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-20 14:34:44 +01:00
Xiang Xiao
ffda739704
Fix error: shifting a negative signed value is undefined
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-20 14:34:44 +01:00
Xiang Xiao
908bade7a7
Fix error: converting the result of '<<' to a boolean always evaluates to true
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-20 14:34:44 +01:00
chao an
422272044b
boards/iperf: device name will vary across different NICs
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-20 19:44:32 +08:00
zhangyuan21
7bf1aed08b
lpc31xx/ea3131/pgnsh: enable DEFAULT_SMALL to reducing the code size
2022-11-16 23:33:51 +08:00
zhangyuan21
61535798a0
stm32f103-minimum: enable LTO to reducing the code size
2022-11-16 12:48:31 +08:00
Xiang Xiao
67686c231a
Call nxmutex_destroy and nxsem_destroy in error patch to avoid the leak
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-14 09:34:04 +09:00
anjiahao
a4563b8744
Fix the coding style and typo issue
...
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-14 09:34:04 +09:00
anjiahao
d07792a343
Initialize global mutext/sem by NXMUTEX_INITIALIZER and SEM_INITIALIZER
...
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-14 09:34:04 +09:00
Alan Carvalho de Assis
990b6f2164
board/stm32f103-minimum: Add ssd1306 example
2022-11-14 00:04:55 +08:00
Alan Carvalho de Assis
8af30db2c5
board/stm32f103-minimum: Enable nsh help and basic commands
2022-11-14 00:04:44 +08:00
Xiang Xiao
a446b5816f
mm/circbuf: Remove MM_CIRCBUF option from Kconfig
...
since the linker can remove the unused object file from the final image
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-08 10:18:27 -03:00
Masayuki Ishikawa
bbe2fd3b80
boards: Fix the CI build errors for telnetd
...
Summary:
- This commit fixes the CI build errors regressed by
https://github.com/apache/incubator-nuttx/pull/7351
Impact:
- None
Testing:
- Build only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-11-07 16:06:00 +01:00
Xiang Xiao
4e43fef5cd
boards: Update telnetd related config after apps/nshlib change
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-07 15:24:29 +09:00
raiden00pl
f43f046983
boards/arm: remove -funwind-tables from boards Make.defs
2022-11-05 20:36:35 +08:00
Xiang Xiao
b048428180
Fix mcb1700.h:21:9: error: '__BOARDSS_ARM_LPC17XX_40XX_MCB1700_SRC_MCB1700_H' is used as a header guard here, followed by #define of a different macro
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-03 14:41:14 +01:00
wangbowen6
5611d89015
nucleo-h743zi2: refresh the pysim defconfig to fix CI problem
...
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
2022-11-01 16:16:02 +08:00
Andrés Sánchez Pascual
533a83155b
issue/ORDISO-17: Add wdg support
...
Signed-off-by: Andrés Sánchez Pascual <tito97_sp@hotmail.com>
2022-11-01 09:21:04 +08:00
SPRESENSE
77528fbeb9
boards/cxd56xx/spresense: Add CXD56_LTE_LATE_INITIALIZE config
...
This CXD56_LTE_LATE_INITIALIZE enables to initialize alt1250 lte
driver in the application side code.
2022-11-01 09:20:34 +08:00
SPRESENSE
76e411eca0
boards: cxd56xx: Add CXD56_CAMERA_LATE_INITIALIZE config
...
This CXD56_CAMERA_LATE_INITIALIZE enables to initialize camera device
drivers in the application side code.
2022-11-01 09:20:34 +08:00
SPRESENSE
9a8576911f
boards: cxd56xx: Fix power-off time of video driver
...
Add a power-off time for image sensor by the device specification.
2022-11-01 09:20:34 +08:00
Xiang Xiao
28947517ca
sched/spawn: Rename task_spawnattr_[get|set]stack[size|addr] to posix_spawnattr_[get|set]stack[size|addr]
...
since they can be not only used in task_spawn but also in posix_spawn
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-01 09:51:18 +09:00
Sergey Nikitenko
74b38d3c65
boards/stm32wb/flipperzero: adding LCD support
2022-10-31 09:40:13 +08:00
Xiang Xiao
e9f630ecb5
Fix clang compiler warning in boards/arm/stm32/
...
Error: board/stm32_ssd1289.c:290:33: error: shifting a negative signed value is undefined [-Werror,-Wshift-negative-value]
putreg32(FSMC_BTR_ADDSET(5) | FSMC_BTR_ADDHLD(0) |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/arch/arm/src/chip/hardware/stm32_fsmc.h:164:42: note: expanded from macro 'FSMC_BTR_ADDHLD'
^
/github/workspace/sources/nuttx/arch/arm/src/common/arm_internal.h:135:54: note: expanded from macro 'putreg32'
^
Error: board/stm32_ssd1289.c:291:33: error: shifting a negative signed value is undefined [-Werror,-Wshift-negative-value]
FSMC_BTR_DATAST(9) | FSMC_BTR_BUSTURN(0) |
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/arch/arm/src/chip/hardware/stm32_fsmc.h:172:42: note: expanded from macro 'FSMC_BTR_BUSTURN'
^
/github/workspace/sources/nuttx/arch/arm/src/common/arm_internal.h:135:54: note: expanded from macro 'putreg32'
^
Error: board/stm32_ssd1289.c:292:12: error: shifting a negative signed value is undefined [-Werror,-Wshift-negative-value]
FSMC_BTR_CLKDIV(0) | FSMC_BTR_DATLAT(0) |
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/arch/arm/src/chip/hardware/stm32_fsmc.h:176:42: note: expanded from macro 'FSMC_BTR_CLKDIV'
^
/github/workspace/sources/nuttx/arch/arm/src/common/arm_internal.h:135:54: note: expanded from macro 'putreg32'
^
Error: board/stm32_ssd1289.c:292:33: error: shifting a negative signed value is undefined [-Werror,-Wshift-negative-value]
FSMC_BTR_CLKDIV(0) | FSMC_BTR_DATLAT(0) |
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/arch/arm/src/chip/hardware/stm32_fsmc.h:180:42: note: expanded from macro 'FSMC_BTR_DATLAT'
^
/github/workspace/sources/nuttx/arch/arm/src/common/arm_internal.h:135:54: note: expanded from macro 'putreg32'
^
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-30 16:03:35 +01:00
Xiang Xiao
e46bdeca1d
Fix Error: board/cxd56_leds.c:43:20: error: unused function 'led_clrbits' [-Werror,-Wunused-function]
...
static inline void led_clrbits(unsigned int clrbits)
^
Error: board/cxd56_leds.c:66:20: error: unused function 'led_setbits' [-Werror,-Wunused-function]
static inline void led_setbits(unsigned int setbits)
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-30 16:03:35 +01:00
Xiang Xiao
2e3473c9d6
Fix src/cxd56_ili9340.c:276:22: error: cast to smaller integer type 'uint16_t' (aka 'unsigned short') from 'uint8_t *' (aka 'unsigned char *') [-Werror,-Wpointer-to-int-cast]
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-30 16:03:35 +01:00
Xiang Xiao
d8babf8dfd
Fix board/cxd56_sdcard.c:128:11: error: logical not is only applied to the left hand side of this comparison [-Werror,-Wlogical-not-parentheses]
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-30 16:03:35 +01:00
anjiahao
d7b4e91dda
Call nxsem_destroy or nxmutex_destry in the error path
...
1.Don't check the return value of nxsem_init or nxmutex_init
2.Fix some style issue
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-30 13:56:52 +01:00
Roberto Bucher
a2ff09642c
Files for pysimCoder on nucleo-h743zi2
2022-10-29 18:03:37 -03:00
Roberto Bucher
5bc2bfcd0f
Files for pysimCoder on nucleo-h743ZI2 board
2022-10-29 18:03:37 -03:00
Roberto Bucher
18abd44e0e
Files for pysimCoder on nucleo-h743ZI2 board
2022-10-29 18:03:37 -03:00
Roberto Bucher
80ed34cae5
Files for pysimCoder on nucleo-h743zi1
2022-10-29 18:03:37 -03:00
Roberto Bucher
e944cd2340
Files for pysimCoder on nucleo-h743zi2
2022-10-29 18:03:37 -03:00
Roberto Bucher
ac64214963
Files for pysimCoder on nucleo-h743zi2
2022-10-29 18:03:37 -03:00
Roberto Bucher
944bb6164d
Files for pysimCoder on nucleo-h743zi2
2022-10-29 18:03:37 -03:00
Roberto Bucher
79f5906a7b
Files for pysimCoder on nucleo-h743zi2
2022-10-29 18:03:37 -03:00
Roberto Bucher
795d35e2cd
Files for pysimCoder on nucleo-h743zi2
2022-10-29 18:03:37 -03:00
Roberto Bucher
e6708bcb4b
Files for pysimCoder on nucleo-h743zi2
2022-10-29 18:03:37 -03:00
Roberto Bucher
94edb5d1aa
Files for pysimCoder on nucleo-h743zi2
2022-10-29 18:03:37 -03:00
Roberto Bucher
d68adac733
Files for pysimCoder on nucleo-h743zi2
2022-10-29 18:03:37 -03:00
Roberto Bucher
793f37c007
Files for pysimCoder on nucleo-h743zi2
2022-10-29 18:03:37 -03:00
Roberto Bucher
6844a529aa
Set deadtime for complementary PWM
2022-10-29 18:03:37 -03:00
Roberto Bucher
dfcfce24f6
New configuration for CAN bus
2022-10-26 21:56:17 +08:00
Roberto Bucher
bc432118b0
New files for pysimCoder
2022-10-26 21:56:17 +08:00
nietingting
f361d1cd41
CI: add example to sim
...
Signed-off-by: nietingting <nietingting@xiaomi.com>
2022-10-26 10:55:50 +08:00
Andrés Sánchez Pascual
b5052a8475
board/stm32h7: update mcuboot-loader configuration
...
Signed-off-by: Andrés Sánchez Pascual <tito97_sp@hotmail.com>
2022-10-26 00:53:29 +08:00
yinshengkai
f018a9cb54
Makefile: Remove INCDIROPT
...
This option, which resolves to -w when CONFIG_CYGWIN_WINTOOL is
configured, is now appended to INCDIR in tools/Config.mk.
See git commit # 5eae32577e
in the main
2022-10-25 12:05:38 +02:00
Sergey Nikitenko
1feb0e759d
boards/stm32wb: Flipper Zero initial support
2022-10-25 12:39:55 +08:00
Alin Jerpelea
42a0f444ee
boards: spresense: enable lte modem
...
Enable and configure ALT1250 LTE modem
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2022-10-25 03:25:20 +08:00
chao an
09cc29af4d
arch/armv6-m: fix compile error on LLVM clang
...
armv6-m/arm_exception.S:139:2: error: invalid instruction, any one of the following would fix this:
sub r1, #(4 * (10))
^
armv6-m/arm_exception.S:139:2: note: instruction requires: thumb2
sub r1, #(4 * (10))
^
armv6-m/arm_exception.S:139:10: note: invalid operand for instruction
sub r1, #(4 * (10))
^
armv6-m/arm_exception.S:139:2: note: no flag-preserving variant of this instruction available
sub r1, #(4 * (10))
^
armv6-m/arm_exception.S:139:10: note: operand must be a register in range [r0, r7]
sub r1, #(4 * (10))
^
-----------------------------------------
bringup.c:125:18: warning: variable 'ret' is uninitialized when used here [-Wuninitialized]
return ret;
^~~
bringup.c:73:10: note: initialize the variable 'ret' to silence this warning
int ret;
^
= 0
Signed-off-by: chao an <anchao@xiaomi.com>
2022-10-25 00:52:00 +08:00
SPRESENSE
00d1a7db29
boards: cxd56xx: Update imageproc driver
...
Fix raster operation bug in non-scaling case, and change the type
of return value to int with error code for some functions.
2022-10-24 22:54:46 +08:00
chao an
fa0577ebfb
boards/arm/gcc: disable coverage analysis temporarily
...
**Please revert this change if arm resolved this issue in the next release**
ARM GNU toolchain 11.3.Rel1 missing gcov_* symbols:
https://community.arm.com/support-forums/f/compilers-and-libraries-forum/53354/arm-gnu-toolchain-11-3-rel1-missing-gcov_-symbols
$ arm-none-eabi-gcc -v
...
gcc version 11.3.1 20220712 (Arm GNU Toolchain 11.3.Rel1)
$ cat main.c
int __start(void)
{
return 0;
}
Compiler with arm GCC-11.3:
$ arm-none-eabi-gcc -c -Wstrict-prototypes -Os -fno-strict-aliasing -fomit-frame-pointer -fprofile-generate \
-ftest-coverage -mthumb --coverage -fno-common -Wall -Wshadow -Wundef -ffunction-sections -fdata-sections -g \
-mlittle-endian -mcpu=cortex-m0 -mthumb -mfloat-abi=soft main.c -o main.o
$ arm-none-eabi-ld --entry=__start -nostdlib --gc-sections -Tpimoroni-tiny2040-flash.ld -o test_gcov --start-group main.o \
~/gcc/linux/arm/bin/../lib/gcc/arm-none-eabi/11.3.1/thumb/v6-m/nofp/libgcov.a --end-group
arm-none-eabi-ld: main.o: in function `__start':
/home/archer/code/nuttx/n4/incubator-nuttx/main.c:2: undefined reference to `__gcov_indirect_call_profiler_v4'
arm-none-eabi-ld: /home/archer/code/nuttx/n4/incubator-nuttx/main.c:4: undefined reference to `__gcov_indirect_call'
arm-none-eabi-ld: /home/archer/code/nuttx/n4/incubator-nuttx/main.c:4: undefined reference to `__gcov_time_profiler_counter'
link success with arm GCC-10.3:
$ arm-none-eabi-ld --entry=__start -nostdlib --gc-sections -Tpimoroni-tiny2040-flash.ld -o test_gcov --start-group main.o \
~/lib/gcc/arm-none-eabi/10.3.1/thumb/v6-m/nofp/libgcov.a --end-group
$ ls -l test_gcov
-rwxrwxr-x 1 archer archer 68744 10月 24 12:51 test_gcov
Signed-off-by: chao an <anchao@xiaomi.com>
2022-10-24 20:23:28 +08:00
anjiahao
5724c6b2e4
sem:remove sem default protocl
...
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2022-10-22 14:50:48 +08:00
Alin Jerpelea
06c8e43df9
drivers: modem: update altair modem
...
update Altair modem with the ALT1250 implementation
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2022-10-22 09:00:32 +08:00
nietingting
8438396f33
ci: add qemu run support
...
Signed-off-by: nietingting <nietingting@xiaomi.com>
2022-10-21 14:57:43 +08:00
SPRESENSE
62c98d4187
boards: cxd56xx: Remove unnecessary i2c uninitialize process
...
Remove unnecessary i2c uninitialize process to fix an issue that
i2c tool does not work well.
2022-10-20 21:49:07 +02:00
raiden00pl
0646ae92ff
nucleo-144/f722: add CAN and SocketCAN configurations
2022-10-20 00:08:36 +08:00
raiden00pl
a3db5fe24b
stm32f7: add SocketCAN support
2022-10-20 00:08:36 +08:00
raiden00pl
0d8b8ce5e2
stm32f7/nucleo-144: refactor bringup logic
2022-10-20 00:08:36 +08:00
raiden00pl
0954b60df6
stm32f7/nucleo-144: add CAN1 pins selection
2022-10-20 00:08:36 +08:00
Xiang Xiao
edd68d8ae9
board: Change CONFIG_SYSTEM_NSH_SYMTAB to CONFIG_NSH_SYMTAB
...
follow the apps side change
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-18 22:18:51 +02:00
Xiang Xiao
6b31918b42
Remove the unnecessary cast for main_t, NULL and argv
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-18 08:51:45 +02:00
Xiang Xiao
7923ea3bef
boards: Refresh defconfig after the default value of FS_PROCFS_EXCLUDE_xxx
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-18 15:10:26 +09:00
anjiahao
d1d46335df
Replace nxsem API when used as a lock with nxmutex API
...
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-17 15:59:46 +09:00
Xiang Xiao
b9cd0508e7
boards: Correct xxx_main prototype
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-16 19:02:44 +02:00
Xiang Xiao
78f6a02bc8
boards: Remove the duplicated prototype of CONFIG_INIT_ENTRYPOINT
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-16 19:02:44 +02:00
Nathan Hartman
d8f9c60e9e
boards/tm4c129e-launchpad: Enable priority inheritance in ostest config
2022-10-08 10:44:31 +09:00
Masayuki Ishikawa
07b9ebc555
boards: sabre-6quad: Add the skeleton network driver
...
Summary:
- This commit adds the skeleton network driver to netnsh/defconfig
- Also, enable IPv6 to check compilation
Impact:
- None
Testing:
- Build with sabre-6quad:netnsh
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-10-07 14:34:03 +08:00
raiden00pl
2c722883bc
nucleo-f446re: add romfs support
2022-10-06 00:44:58 +08:00
Xiang Xiao
92f156c969
boards: Change the linker generated symbols from uint32_t to uint8_t array
...
since the symbol generated by linker is always used as an address not a value.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-05 14:24:47 +02:00
Masayuki Ishikawa
72a29f3fa8
boards: raspberrypi-pico: Adjust CONFIG_UART0_TXBUFSIZE for SMP
...
Summary:
- I noticed that sometimes automatic tests failed due to
missing serial outputs, although the kernel is still alive.
- This commit fixes the issue.
Impact:
- raspberrypi-pico:smp only
Testing:
- Tested with smp, ostest, etc.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-10-05 13:21:36 +08:00
Xiang Xiao
2a574427c6
boards: Remove CONFIG_NETDEVICES=y from board defconfig
...
since it's enabled by default now
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-01 19:12:15 +02:00