1. add support to join main task
| static pthread_t self;
|
| static void *join_task(void *arg)
| {
| int ret;
| ret = pthread_join(self, NULL); <--- /* Fix Task could not be joined */
| return NULL;
| }
|
| int main(int argc, char *argv[])
| {
| pthread_t thread;
|
| self = pthread_self();
|
| pthread_create(&thread, NULL, join_task, NULL);
| sleep(1);
|
| pthread_exit(NULL);
| return 0;
| }
2. Detach active thread will not alloc for additional join, just update the task flag.
3. Remove the return value waiting lock logic (data_sem),
the return value will be stored in the waiting tcb.
4. Revise the return value of pthread_join(), consistent with linux
e.g:
Joining a detached and canceled thread should return EINVAL, not ESRCH
https://pubs.opengroup.org/onlinepubs/009695399/functions/pthread_join.html
[EINVAL]
The value specified by thread does not refer to a joinable thread.
NOTE:
This PR will not increase stack usage, but struct tcb_s will increase 32 bytes.
Signed-off-by: chao an <anchao@lixiang.com>
move task group into task_tcb_s to avoid access allocator to improve performance
for Task Termination, the time consumption will be reduced ~2us (Tricore TC397 300MHZ):
15.97(us) -> 13.55(us)
Signed-off-by: chao an <anchao@lixiang.com>
This moves task / thread cancel point logic from the NuttX kernel into
libc, while the data needed by the cancel point logic is moved to TLS.
The change is an enabler to move user-space APIs to libc as well, for
a coherent user/kernel separation.
fix ltp pthread_cond_wait_1 test question, child should inherit parent
priority by default.
nsh> ltp_pthread_cond_wait_1
Error: the policy or priority not correct
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
This is preparation to use kernel stack for everything when the user
process enters the kernel. Now the user stack is in use when the user
process runs a system call, which might not be the safest option.
There is currently a big problem in the address environment handling which
is that the address environment is released too soon when the process is
exiting. The current MMU mappings will always be the exiting process's, which means
the system needs them AT LEAST until the next context switch happens. If
the next thread is a kernel thread, the address environment is needed for
longer.
Kernel threads "lend" the address environment of the previous user process.
This is beneficial in two ways:
- The kernel processes do not need an allocated address environment
- When a context switch happens from user -> kernel or kernel -> kernel,
the TLB does not need to be flushed. This must be done only when
changing to a different user address environment.
Another issue is when a new process is created; the address environment
of the new process must be temporarily instantiated by up_addrenv_select().
However, the system scheduler does not know that the process has a different
address environment to its own and when / if a context restore happens, the
wrong MMU page directory is restored and the process will either crash or
do something horribly wrong.
The following changes are needed to fix the issues:
- Add mm_curr which is the current address environment of the process
- Add a reference counter to safeguard the address environment
- Whenever an address environment is mapped to MMU, its reference counter
is incremented
- Whenever and address environment is unmapped from MMU, its reference
counter is decremented, and tested. If no more references -> drop the
address environment and release the memory as well
- To limit the context switch delay, the address environment is freed in
a separate low priority clean-up thread (LPWORK)
- When a process temporarily instantiates another process's address
environment, the scheduler will now know of this and will restore the
correct mappings to MMU
Why is this not causing more noticeable issues ? The problem only happens
under the aforementioned special conditions, and if a context switch or
IRQ occurs during this time.
Detach the address environment handling from the group structure to the
tcb. This is preparation to fix rare cases where the system (MMU) is left
without a valid page directory, e.g. when a process exits.
D:\code\incubator-nuttx\sched\pthread\pthread_create.c(154,22):
warning C4189: “pjoin”: local variable is initialized but not referenced
[D:\code\incubator-nuttx\vs20221\sched\sched.vcxproj]
D:\code\incubator-nuttx\sched\group\group_setupidlefiles.c(61,28):
warning C4189: “group”: local variable is initialized but not referenced
[D:\code\incubator-nuttx\vs20221\sched\sched.vcxproj]
Reference:
https://docs.microsoft.com/en-us/cpp/error-messages/compiler-warnings/compiler-warning-level-4-c4189?view=msvc-170
Signed-off-by: chao.an <anchao@xiaomi.com>
if a pthread set attr is detach,and when call pthread_create,
new thread exit quikly,new thread's tcb be free,then pthread_create
use new thread's tcb will crash.
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Drop to user-space in kernel/protected build with up_pthread_exit,
now all pthread_cleanup functions executed in user mode.
* A new syscall SYS_pthread_exit added
* A new tcb flag TCB_FLAG_CANCEL_DOING added
* up_pthread_exit implemented for riscv/arm arch
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
arch: Allocate the space from the beginning in up_stack_frame
and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
getopt() in the FLAT build environment is not thread safe. This is because global variables that are process-specific in Unix are truly global in the FLAT build. Moving the getopt() variables into TLS resolves this issue.
No side-effects are expected other than to getopt()
Tested with sim:nsh
to ensure the basic info(e.g. pid) setup correctly before call arch API
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I851cb0fdf22f45844938dafc5981b3f576100dba
-Move task_init() and task_activate() prototypes from include/sched.h to include/nuttx/sched.h. These are internal OS functions and should not be exposed to the user.
-Remove references to task_init() and task_activate() from the User Manual.
-Rename task_init() to nxtask_init() since since it is an OS internal function
-Rename task_activate() to nxtask_activate since it is an OS internal function
