To prepare for future IPv6 NAT functions.
- Rename common ipv4_nat_xxx to nat_xxx
- Move some common definitions into header
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
If we only enable one of `CONFIG_NET_ARP_SEND` and
`CONFIG_NET_ICMPv6_NEIGHBOR`, both IPv4 and IPv6 traffic will send
ARP or NDP, which causes problem.
Example:
`CONFIG_NET_ARP_SEND=n`
`CONFIG_NET_ICMPv6_NEIGHBOR=y`
Wrong:
IPv4 traffic (`PF_INET`) goes into `icmpv6_neighbor`, which
definitely causes problem.
Correct:
IPv4 traffic doesn't call anything, IPv6 traffic calls `icmpv6_neighbor`
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Note that user-space related code, like procfs and lifreq related ioctl commands, are not touched in this commit.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
We may just free some TCP connections before monitor stopped, e.g.
sacrificie a TCP conn in `tcp_alloc` will just call `tcp_free` and reuse
the connection. But we noticed that the TCP monitor is not released in
`tcp_free` because it is mounted on `conn->connevents` instead of
`conn->sconn.list` while `tcp_free` only release the latter.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
The netdev of link-local address cannot be auto decided, and the link-local address should always be reguarded as address on local network.
The problem we met:
When using `icmpv6_autoconfig` with multiple netdev, the `icmpv6_neighbor` may take out wrong netdev with ip address already set, then it may send solicitation with wrong address (`dev->d_ipv6draddr`) on wrong device, and regard the link-local address as conflict (because `dev->d_ipv6draddr` exists on this network).
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Problem:
When tcp_close_work starts to run in LPWORK, if another event comes and
calls tcp_free before tcp_close_work takes net_lock, the tcp_free will
be called twice and cause double free.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When do socket bind, if the connection domain is not equal to the bound address type, this will cause the stack-buffer-overflow.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
- NewReno congestion control algorithm is used to solve the problem
of network congestion breakdown. NewReno congestion control includes
slow start, collision avoidance, fast retransmission, and fast
recovery. The implementation refers to RFC6582 and RFC5681.
- In addition, we optimize the congestion algorithm. In the conflict
avoidance stage, the maximum congestion window max_cwnd is used to
limit the excessive growth of cwnd and prevent network jitter
caused by congestion. Maximum congestion window max_cwnd is updated
with the current congestion window cwnd and the update weight is
0.875 when an RTO timeout occurs.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
Issue:
TCP rx buffer is freed after 4-way handshake with current design.
3 socket's rx buffer might be consumed during ffmpeg switch music procedure,
and this might cause IOB exhausted.
Solution:
free TCP rx buffer immediately in tcp_close to make sure IOB won't be
exhausted.
Signed-off-by: 梁超众 <liangchaozhong@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
I noticed that the conn instance will leak during stress test,
The close work queued from tcp_close_eventhandler() will be canceled
by tcp_timer() immediately:
Breakpoint 1, tcp_close_eventhandler (dev=0x565cd338 <up_irq_restore+108>, pvpriv=0x5655e6ff <getpid+12>, flags=0) at tcp/tcp_close.c:71
(gdb) bt
| #0 tcp_close_eventhandler (dev=0x565cd338 <up_irq_restore+108>, pvpriv=0x5655e6ff <getpid+12>, flags=0) at tcp/tcp_close.c:71
| #1 0x5658bf1e in devif_conn_event (dev=0x5660bd80 <g_sim_dev>, flags=512, list=0x5660d558 <g_cbprealloc+312>) at devif/devif_callback.c:508
| #2 0x5658a219 in tcp_callback (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>, flags=512) at tcp/tcp_callback.c:167
| #3 0x56589253 in tcp_timer (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:378
| #4 0x5658dd47 in tcp_poll (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_devpoll.c:95
| #5 0x5658b95f in devif_poll_tcp_connections (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:601
| #6 0x5658b9ea in devif_poll (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:722
| #7 0x56577230 in netdriver_txavail_work (arg=0x5660bd80 <g_sim_dev>) at sim/up_netdriver.c:308
| #8 0x5655999e in work_thread (argc=2, argv=0xf3db5dd0) at wqueue/kwork_thread.c:178
| #9 0x5655983f in nxtask_start () at task/task_start.c:129
(gdb) c
Continuing.
Breakpoint 2, tcp_update_timer (conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:178
(gdb) bt
| #0 tcp_update_timer (conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:178
| #1 0x5658952a in tcp_timer (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:708
| #2 0x5658dd47 in tcp_poll (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_devpoll.c:95
| #3 0x5658b95f in devif_poll_tcp_connections (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:601
| #4 0x5658b9ea in devif_poll (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:722
| #5 0x56577230 in netdriver_txavail_work (arg=0x5660bd80 <g_sim_dev>) at sim/up_netdriver.c:308
| #6 0x5655999e in work_thread (argc=2, argv=0xf3db5dd0) at wqueue/kwork_thread.c:178
| #7 0x5655983f in nxtask_start () at task/task_start.c:129
Since a separate work will add 24 bytes to each conn instance,
but in order to support the feature of asynchronous close(),
I can not find a better way than adding a separate work,
for resource constraints, I recommend the developers to enable
CONFIG_NET_ALLOC_CONNS, which will reduce the ram usage.
Signed-off-by: chao an <anchao@xiaomi.com>
since it is impossible to track producer and consumer
correctly if TCP/IP stack pass IOB directly to netdev
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
When the free connection list is unenough to alloc a new instance,
the TCP stack will reuse the currently closed connection, but if
the handle is not released by the user via close(2), the reference
count of the connection remains in a non-zero value, it will cause
the assertion to fail, so when the handle is not released we should
not use such a conn instance when being actively closed, and ensure
that the reference count is assigned within the net lock protection
|(gdb) bt
|#0 up_assert (filename=0x565c78f7 "tcp/tcp_conn.c", lineno=771) at sim/up_assert.c:75
|#1 0x56566177 in _assert (filename=0x565c78f7 "tcp/tcp_conn.c", linenum=771) at assert/lib_assert.c:36
|#2 0x5657d620 in tcp_free (conn=0x565fb3e0 <g_tcp_connections>) at tcp/tcp_conn.c:771
|#3 0x5657d5a1 in tcp_alloc (domain=2 '\002') at tcp/tcp_conn.c:700
|#4 0x565b1f50 in inet_tcp_alloc (psock=0xf3dea150) at inet/inet_sockif.c:144
|#5 0x565b2082 in inet_setup (psock=0xf3dea150, protocol=0) at inet/inet_sockif.c:253
|#6 0x565b1bf0 in psock_socket (domain=2, type=1, protocol=0, psock=0xf3dea150) at socket/socket.c:121
|#7 0x56588f5f in socket (domain=2, type=1, protocol=0) at socket/socket.c:278
|#8 0x565b11c0 in hello_main (argc=1, argv=0xf3dfab10) at hello_main.c:35
|#9 0x56566631 in nxtask_startup (entrypt=0x565b10ef <hello_main>, argc=1, argv=0xf3dfab10) at sched/task_startup.c:70
|#10 0x565597fa in nxtask_start () at task/task_start.c:134
Signed-off-by: chao.an <anchao@xiaomi.com>
This reverts commit b88a1fd7fd. [1]
Because:
* It casues assertion failures like [2].
* I don't understand what it attempted to fix.
[1]
```
commit b88a1fd7fd
Author: chao.an <anchao@xiaomi.com>
Date: Sat Jul 2 13:17:41 2022 +0800
net/tcp: discard connect reference before free
connect reference should be set to 0 before free
Signed-off-by: chao.an <anchao@xiaomi.com>
```
[2]
```
#0 up_assert (filename=0x5516d0 "tcp/tcp_conn.c", lineno=771) at sim/up_assert.c:75
#1 0x000000000040a4bb in _assert (filename=0x5516d0 "tcp/tcp_conn.c", linenum=771) at assert/lib_assert.c:36
#2 0x000000000042a2ad in tcp_free (conn=0x597fe0 <g_tcp_connections+384>) at tcp/tcp_conn.c:771
#3 0x000000000053bdc2 in tcp_close_disconnect (psock=0x7f58d1abbd80) at tcp/tcp_close.c:331
#4 0x000000000053bc69 in tcp_close (psock=0x7f58d1abbd80) at tcp/tcp_close.c:366
#5 0x000000000052eefe in inet_close (psock=0x7f58d1abbd80) at inet/inet_sockif.c:1689
#6 0x000000000052eb9b in psock_close (psock=0x7f58d1abbd80) at socket/net_close.c:102
#7 0x0000000000440495 in sock_file_close (filep=0x7f58d1b35f40) at socket/socket.c:115
#8 0x000000000043b8b6 in file_close (filep=0x7f58d1b35f40) at vfs/fs_close.c:74
#9 0x000000000043ab22 in nx_close (fd=9) at inode/fs_files.c:544
#10 0x000000000043ab7f in close (fd=9) at inode/fs_files.c:578
```
Do not bother to preserve segment boundaries in the tcp
readahead queues.
* Avoid wasting the tail IOB space for each segments.
Instead, pack the newly received data into the tail space
of the last IOB. Also, advertise the tail space as
a part of the window.
* Use IOB chain directly. Eliminate IOB queue overhead.
* Allow to accept only a part of a segment.
* This change improves the memory efficiency.
And probably more importantly, allows less-confusing
recv window advertisement behavior.
Previously, even when we advertise N bytes window,
we often couldn't actually accept N bytes. Depending on
the segment sizes and IOB configurations, it was causing
segment drops.
Also, the previous code was moving the right edge of the
window back and forth too often, even when nothing in
the system was competing on the IOBs. Shrinking the
window that way is a kinda well known recipe to confuse
the peer stack.
* Fixes the case where the window was small but not zero.
* tcp_recvfrom: Remove tcp_ackhandler. Instead, simply schedule TX for
a possible window update and make tcp_appsend decide.
* Replace rcv_wnd (the last advertized window size value) with
rcv_adv. (the window edge sequence number advertized to the peer)
rcv_wnd was complicated to deal with because its base (rcvseq) is
also moving.
* tcp_appsend: Send a window update even if there are no other reasons
to send an ack.
Namely, send an update if it increases the window by
* 2 * mss
* or the half of the max possible window size
