Pierre-Noel Bouteville has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Reason:
nx_start use syslog at every early time event the idle thread not
full setup, then syslog_rpmsg -> work_queue -> work_signal ->
nxsig_kill -> rtcb is NULL -> crash
Fix:
sched work_queue after is_rpmsg_ept_ready() is true
Change-Id: I225469ff2526e4b810bf3e23473b55d57e64a1ff
Signed-off-by: ligd <liguiding1@xiaomi.com>
Found by clang-check:
syslog/syslog_write.c:96:7: warning: Value stored to 'nwritten' is never read
nwritten = g_syslog_channel->sc_write(buffer, buflen);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Same as syslog/Make.defs to use #ifdef CONFIG_SYSLOG_RPMSG to build syslog_rpmsg.c
in which syslog_rpmsg_init defined.
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
And remove syslog_init_e because all initialization is later now and we don't
distinguish the initialition phase anymore after ramlog don't need special
initialize.
Because we can get the same function by CONSOLE_SYSLOG/syslog_console_init.
BTW, it isn't a good choice to use g_ramlogfops as /dev/console since nsh
will read back what it send out which will surprise most people.
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
We also make an attempt to avoid the thundering herd problem if there are multiple readers/pollers.
Patch also removes forcing CONFIG_RAMLOG_CRLF in nuttx/syslog/ramlog.h as there is no point of wasting precious RAM for useless characters.
This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository.
Squashed commit of the following:
Author: Xiang Xiao <xiaoxiang@pinecone.net>
include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char.
Author: Gregory Nutt <gnutt@nuttx.org>
Fix several build issues/missing definitiona needed for OpenAMP build in drivers/.
Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for).
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
tools/: Fix the minor issue in Makefile
Author: Gregory Nutt <gnutt@nuttx.org>
drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle.
tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste.
fs/hostfs: Add configure and build support for hostfs RPC.
drivers/timer: Add configure and build support for syslog RTC.
drivers/syslog: Add configure and build support for syslog RPC.
drivers/serial: Add configure and build support for serial RPC.
Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support.
drivers/rptun: Add configure and build support for OpenAMP tunnel drivers.
drivers/net: Update Make.defs and Kconfig for OpenSDA support.
Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now.
Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application.
Author: zhuyanlin <zhuyanlin@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
Author: Jianli Dong <dongjianli@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
Author: Guiding Li <liguiding@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
Iobinstrumentation
* mm/iob: Introduces producer/consumer id to every iob call. This is so that the calls can be instrumented to monitor the IOB resources.
* iob instrumentation - Merges producer/consumer enumeration for simpler IOB user.
* fs/procfs: Starts adding support for /proc/iobinfo
* fs/procfs: Finishes first pass of simple IOB user stastics and /proc/iobinfo entry
Approved-by: Gregory Nutt <gnutt@nuttx.org>
arch/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
sched/ audio/ crypto/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
Documentation/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
fs/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
graphics/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
net/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
drivers/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
include/, syscall/, wireless/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
configs/: Remove all references to CONFIG_DISABLE_POLL. Standard POSIX poll can no longer be disabled.
Add some I2C devices to nucleo-h743zi and a few small fixes
configs/nucleo-h743zi: add support for ssd1306
configs/nucleo-h743zi: add support for pca9635
configs/nucleo-h743zi: add support for i2ctools
include/nuttx/sensors/lsm6dsl.h: remove whitespaces
configs/stm32f103-minimum/src/stm32_ssd1306.c: cosmetics
Documentation/NuttxPortingGuide.html: vsyslog return none
drivers/syslog/README.txt: vsyslog return none
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3.
fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS.
syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0
binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3
configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
sched/init/nx_bringup.c: Fix a naming collision.
sched/init: Rename os_start() to nx_start()
sched/init: Rename os_smp* to nx_smp*
sched/init: Rename os_bringup to nx_bringup
sched/init: rename all internal static functions to begin with nx_ vs os_
many locations: Change occurences of open() followed by file_detach() to file_open(). Change most non-controversion calls to open() to nx_open().
fs/inode/fs_fileopen.c: Flesh out file_open() with some interim, placeholder logic.
fs/inode/fs_fileopen.c: Add a framework for a file_open() implementation (no real logic in place yet).
fs/vfs/fs_open.c: Add nx_open() which is the same as open() except that it does not create a cancellation point nor does it modify the errno variable.
drivers/syslog: Channel configuration. Decouple SYSLOG_SERIAL_CONSOLE and ARCH_LOWPUTC. Since some hardware can output log to the special debug channel not serial.
drivers/syslog/vsyslog.c: Support pre-pending a prefix string to log output if enabled. This very useful to identify which cpu send out the log in AMP SoC.
drivers/syslog/vsyslog.c: Make timestamp output same as linux kernel. It's very useful if NuttX syslog retarget to Linux syslog.
This commit backs out most of commit b4747286b1. That change was added because sem_wait() would sometimes cause cancellation points inappropriated. But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.
In the OS, all calls to sem_wait() changed to nxsem_wait(). nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.
In all OS functions (not libraries), change sem_wait() to nxsem_wait(). This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.
sched/semaphore: Add the function nxsem_wait(). This is a new internal OS interface. It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
sched/semaphore: Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable. Changed all references to sem_post in the OS to nxsem_post().
sched/semaphore: Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable. Changed all references to sem_destroy() in the OS to nxsem_destroy().
libc/semaphore and sched/semaphore: Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable. Changed all references to sem_setprotocol in the OS to nxsem_setprotocol(). sem_getprotocol() was not used in the OS
libc/semaphore: Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable. Changed all references to sem_getvalue in the OS to nxsem_getvalue().
sched/semaphore: Rename all internal private functions from sem_xyz to nxsem_xyz. The sem_ prefix is (will be) reserved only for the application semaphore interfaces.
libc/semaphore: Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable. Changed all references to sem_init in the OS to nxsem_init().
sched/semaphore: Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.
sched/semaphoate: Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
I don't like the idea that syslog_dev_write() still scans the entire output buffer to expand CR-LF sequence. This seems really wasteful, especially in this case where we can be sure that the is no CR or LF without a matching LF or CR. Bu, I think, the existing behavior in syslog_dev_write() must be retained because it is needed in other contexts.
With flushing added to vsyslog, then there is problem that next syslog line might come from other task before reset sequence, causing wrong line getting color. This could be avoided by not flushing on '\n' but only if IOB is full and/or at end of vsyslog. Would this make sense?
