sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
35,748 Commits 1 Branch 0 Tags 291 MiB
0d2afbd5cb
Commit Graph

35748 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
chao.an
0d2afbd5cb boards/sim/sim/sim/configs/loadable/defconfig: Update the mount() point of hostfs. 2019-12-13 08:30:34 -06:00
chao.an
eb63227559 include/net, include/nuttx/fs, include/nuttx/wireless: Make wireless definitions more consistent with Linux. 2019-12-13 08:20:07 -06:00
chao.an
5875f07a21 drivers/wireless/ieee80211/bcm43xxx/: Correct parameters passed to wd_start() in all calls. 2019-12-13 08:08:13 -06:00
Xiang Xiao
80d4072bf4 boards/sim/sim/sim/src/sim_bringup.cTry to mount /dev/rammtd if CONFIG_FS_LITTLEFS is enabled. 2019-12-13 08:05:04 -06:00
Xiang Xiao
a6c0c88ac6 boards/sim/sim/sim/configs/: Run make olddefconfig for all simulator config 2019-12-12 11:19:46 -06:00
anchao
1c91aec6ae tools/ and fs/procfs: Simplify .version file generation 
1.merge CONFIG_GIT_REVISION_STR into CONFIG_VERSION_BUILD
2.merge gen_getrev.sh into version.sh
3.generate version number if needed

Here is a sample output:
nsh> uname -a
NuttX  8.2 59fd8e12d3-dirty Dec 12 2019 15:48:00 sim sim
nsh> cat /proc/version
NuttX version 8.2 59fd8e12d3-dirty Dec 12 2019 15:48:01
 2019-12-12 11:17:11 -06:00
Xiang Xiao
1d60bc20a9 fs/procfs/Kconfig: Change the default value of FS_PROCFS_EXCLUDE_VERSION to n like other similar option. 2019-12-12 11:12:37 -06:00
David Sidrane
eb2bcfc44f boards/arm/imxrt/imxrt1020-evk/include/board.h: Enable the GPIO based CD. 2019-12-12 08:34:58 -06:00
David Sidrane
2cbcb8fd00 arch/arm/src/imxrt/imxrt_clockconfig.c and board.h: Allow clock setting for SPI and I2C from board.h. 2019-12-12 08:33:05 -06:00
David Sidrane
42dfd18d7c arch/arm/src/imxrt/imxrt_lpspi.c: Fixed race on register setting. The ouput frequency was not being initialized correctly. The value of LPSPI_TCR_PRESCALE was getting set to 7. Making the setting atomic fixed the race. I suppose a DSB() could have also fixed it. 2019-12-12 08:31:24 -06:00
David Sidrane
587dcaa6e6 arch/arm/src/imxrt/imxrt_lpspi.c: Remove hack setting LPSPI1 daisy irrespective of pin config. I assume this hack pre dated the addition of the dasiy chain setting. It was forcing LPSPI1 pins to read from selection 1 irrespective of pin config. The correct input selection is done in imxrt_config_gpio. 2019-12-12 08:29:08 -06:00
David Sidrane
3d4eb32e48 arch/arm/src/imxrt/imxrt_lpi2c.c: Added configurations to fine tune LPI2C Timeouts. 2019-12-12 08:27:02 -06:00
Junmin Kim
e06329f5e7 fs/vfs/fs_open.c: Fix description of nx_open and nx_vopen comments indicate that they return zero on success when, in fact, they return the new file descriptor. 2019-12-12 08:24:14 -06:00
Nathan Hartman
9655730ef8 Fix various typos and spelling errors. 2019-12-12 07:41:51 -06:00
Petro Karashchenko
3737aa83fa arch/arm/src/am335x/am335x_i2c.c: AM225x I2C driver now works in both polling and interrupt modes. 2019-12-12 07:39:36 -06:00
Gregory Nutt
e5e52446ca net/tcp/tcp_send.c: Trival update to some comments. 2019-12-11 11:19:32 -06:00
Juha Niskanen
c8268cbfcf Merged in juniskane/nuttx-4/Juha-Niskanen/remove-reference-to-nonexistent-config-m-1575888266268 (pull request #1093) 
Remove reference to nonexistent config macro. stm32l4_spi.h edited online with Bitbucket

stm32l4_spi.h edited online with Bitbucket

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-11 12:06:03 +00:00
Juha Niskanen
50768ac7a6 Merged in juniskane/nuttx-3/Juha-Niskanen/kconfig-edited-online-with-bitbucket-1575887906303 (pull request #1092) 
Kconfig edited online with Bitbucket

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-11 12:04:20 +00:00
Masayuki Ishikawa
0eb9bfa49d Merged in masayuki2009/nuttx.nuttx/fe310_with_pll (pull request #1094) 
fe310 with pll

* arch: fe310: Introduce CONFIG_ARCH_CHIP_FE310_QEMU

* boards: hifive1-revb: Introduce CONFIG_ARCH_CHIP_FE310_QEMU

* arch: fe310: Add support for PLL

* boards: hifive1-revb: Increase uart0 tx buff size and add getprime app

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-11 12:01:53 +00:00
Petro Karashchenko
813902cf87 arch/arm/src/am335x and boards/arm/am335x/beaglebone-black: Add I2C support for AM335X. 2019-12-10 20:22:25 -06:00
Gregory Nutt
425b1c737c Fix a problem I introduced in my recent review. 2019-12-10 18:04:56 -06:00
David Sidrane
2e71e0632f arch/arm/src/imxrt/imxrt_usdhc.c: IMXRT106x USDHC: Support regular GPIO for CD and inversion. 2019-12-10 17:58:08 -06:00
Petro Karashchenko
2f00eefa5d arch/arm/src/am335x: Adds AM335x Clock Configuration. 2019-12-10 17:55:08 -06:00
Ouss4
8ae156c8a1 boards/xtensa/esp32/esp32-core/README.txt: Update the toolchain installation help. 2019-12-10 13:44:28 -06:00
Ouss4
7dcf8dde7c arch/xtensa/src/esp32/esp32_start.c: A comma was missing in g_idlestack attributes. 2019-12-10 13:42:58 -06:00
Gregory Nutt
0ef5500e01 /fs/inode: Add checks for NULL pointers as recommended by Junmin Kim <trimind0210@gmail.com>. 2019-12-10 07:50:27 -06:00
Juha Niskanen
abdafaeccc drivers/power: Fix PM build failure with CONFIG_PM_GOVERNOR_MEMORY==1 2019-12-10 07:34:59 -06:00
Gregory Nutt
897378bc29 Remove support for generation of RRLOAD binary files. The RRLOAD binary format was used with Linux BSPs from www.ridgerun.com circa 2000-2001. It is still need by the the c5471 board if that bootloader is used. Removes the CONFIG_RRLOAD_BINARY option and tools/mkimage.sh 
This change was motivated by the presence of the mkimage.sh file under tools.  That is the tool that created the RRLOAD binary format.  That bash script has a GPL license and, hence, may not be included in an Apache-licensed project.
 2019-12-09 11:29:12 -06:00
Gregory Nutt
c2642eef3c net/tcp/tcp_appsend.c: Enhance delayed ACK algorithm with behavior of Windows delayed ACK described at https://support.microsoft.com/en-nz/help/214397/design-issues-sending-small-data-segments-over-tcp-with-winsock: 'If there are data to be sent in the same direction as the ACK before the second data packet is received and the delay timer expires, the ACK is piggybacked with the data segment and sent immediately.' 2019-12-09 08:45:52 -06:00
Gregory Nutt
6a0ab27bd5 net/tcp/tcp_appsend.c: Update some comments. 2019-12-09 06:06:17 -06:00
Gregory Nutt
8cd5e04d53 net/tcp: Minor design improvement to TCP delayed ACKs. 2019-12-08 14:17:55 -06:00
Gregory Nutt
66ef6d143a This commit adds an initial implemented of TCP delayed ACKs as specified in RFC 1122. 
Squashed commit of the following:

    net/tmp:  Rename the unacked field of the tcp connection structure to tx_unacked.  Too confusing with the implementation of delayed RX ACKs.

    net/tcp:  Initial implementation of TCP delayed ACKs.

    net/tcp:  Add delayed ACK configuration selection.  Rename tcp_ack() to tcp_synack().  It may or may not send a ACK.  It will always send SYN or SYN/ACK.
 2019-12-08 13:13:51 -06:00
Gregory Nutt
594734e0ae include/nuttx/net/w5500.h: Finishes off register bitfield definitions. Driver will follow. 2019-12-08 10:53:52 -06:00
Gregory Nutt
53cefb812b include/nuttx/net/w5500.h: Header file for the WIZnet S5500 Ethernet chip. Still missing register bit definitions. Driver will follow. 2019-12-08 09:57:42 -06:00
Gregory Nutt
b2035ebb1c boards/arm/imxrt/imxrt1020-evk/src/imxrt_autoleds.c: Must include imxrt1020-evk.h 2019-12-08 08:24:02 -06:00
Ouss4
47129b36bd arch/mips/*: Run nxstyle on the arch/mips directory. 2019-12-08 08:09:11 -06:00
Ouss4
c9b4da61b0 fs/littlefs/lfs.c: Eliminate a warning about a local variable redefinition. 2019-12-08 08:06:49 -06:00
Gregory Nutt
3e85a7e53d boards/arm/imxrt/imxrt10x0-evk/include/board.h and src/imxrt10x0-evk.h: Board internal GPIO definitions were erroneously moved to board.h in a previous comment. This restores them to where they belong in the private imxrt10x0-evk.h header file. 2019-12-08 08:02:31 -06:00
Masayuki Ishikawa
2cde7dcc8d Merged in masayuki2009/nuttx.nuttx/sparkfun_redv (pull request #1091) 
Sparkfun RED-V Things Plus

* board: hifive1-revb: Update README-qemu.txt

* arch: fe310: Works with SparkFun RED-V Things Plus

    Should work with HiFive1 Rev.B but not tested yet.

* boards: hifive1-revb: Works with SparkFun RED-V Things Plus

    Should work with HiFive1 Rev.B but not tested yet.

Approved-by: Alan Carvalho de Assis <acassis@gmail.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-08 12:42:48 +00:00
Gregory Nutt
dd55d4d8d6 board.h edited online with Bitbucket 
Fixes a stray chacter introduced in a previous commit.
 2019-12-08 12:26:55 +00:00
Brennan Ashton
56c68c4db6 boards/arm/imxrt/imxrt1020-evk: Fix several errors relation to USBOTG: pin definitions in include/board.h and include path for imxrt_usbotg.h in src/imxrt_usbhost.c. 2019-12-07 21:45:39 -06:00
Gregory Nutt
cb288fdfe2 arch/arm/src/stm32f7/stm32_serial.c: Fix a new warning found in build testing. 2019-12-07 13:14:50 -06:00
Gregory Nutt
2437e68d88 boards/arm/stm32/nucleo-f4x1re/src: board.h must always be the last header file included. 2019-12-07 10:17:22 -06:00
Gregory Nutt
703b8303fc boards/arm/stm32/nucleo-f4x1re/include/board.h: board.h header files must never include architecture-specific header files. 2019-12-07 09:43:59 -06:00
Gregory Nutt
9e4602a2f4 drivers/mtd: Apply tools/nxstyle to a few files. Lots more to check. 2019-12-07 08:25:16 -06:00
Gregory Nutt
2761279839 drivers/bch, pipes, timers: Run drivers through tools/nxstyle, correcting as many complaints as possible. 2019-12-06 23:36:33 -06:00
Gregory Nutt
d1584d60a2 drivers/sensors: Run all sensor drivers through tools/nxstyle, correcting as many complaints as possible. 2019-12-06 19:07:34 -06:00
David Sidrane
db6fe28fa6 Merged in david_s5/nuttx/master_imxrt_cap (pull request #1089) 
imxrt106x:pinout add ALT 8 GPIO_GPT1_CAPTURE[1|2]

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-05 22:32:43 +00:00
Gregory Nutt
715383adc7 Minor addition to commit cbde36e406 2019-12-05 15:20:48 -06:00
Gregory Nutt
cbde36e406 drivers/analog: Run all wireless drivers through tools/nxstyle, correcting as many complaints as possible. 2019-12-05 15:13:55 -06:00