Commit Graph

3874 Commits

Author SHA1 Message Date
Tiago Medicci Serrano
cb32e6d50a risc-v/qemu-rv/rv-virt: Add support to loader ROMFS image in kernel
Use ROMFS to load user applications in kernel mode instead of using
hostfs.
2024-02-07 19:46:42 -08:00
Michal Lenc
2f74233565 board/samv7: add support for BOARDCTL_RESET_CAUSE command
This commit adds support for board control command that retrieves the
cause of last reset from HW.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2024-02-07 13:26:37 -03:00
Roberto Bucher
31817335e4 Modified CONFIG_INIT_STACKSIZE to 2048 2024-02-07 10:17:33 -05:00
Aaron Matlock
470ad35508 cmake: Fixed nucleo-u5a5zj-q 2024-02-07 03:20:43 -08:00
Masayuki Ishikawa
38f8aae3be boards: rv-virt: Add nxrecorder to defconfigs
Summary:
- This commit adds nxrecorder to netnsh/netnsh_smp/netnsh64/
  netnsh64_smp defconfigs.

Impact:
- None

Testing:
- Tested with qemu-8.2.0 on Raspi4B with USB Audio

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2024-02-06 00:41:44 -08:00
Rdk-T
7f01db30dc Add EtherCAT support on xmc4800-relax. 2024-02-05 22:23:30 -08:00
Masayuki Ishikawa
7c31be27e3 boards: qemu-armv8a: Add nxrecorder to defconfigs
Summary:
- This commit adds nxrecorder to netnsh/netnsh_hv/netnsh_smp/
  netnsh_smp_hv defconfigs.

Impact:
- None

Testing:
- Tested with qemu-8.2.0 on Raspi4B with USB Audio

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2024-02-05 05:54:04 -08:00
SPRESENSE
a303ec8653 arch: cxd56xx: Add new feature to use GNSS RAM
As long as the GNSS feature is not used, GNSS RAM can be used as general memory.
This memory is 640KByte total, which is lower performance than the application RAM.
It is possible to locate text, data and bss into GNSS RAM and to use as heap area.
2024-02-05 05:53:51 -08:00
SPRESENSE
980102c536 boards/arm/cxd56xx: Fix the modem reset sequence
Since there were some cases in which the current modem reset
sequence did not reset the modem, the reset was ensured by
executing power off and power on of the modem.
2024-02-04 22:05:31 -08:00
Adam Comley
399cd88e7f Support RP2040 Clock Outputs 2024-02-04 16:51:53 -08:00
Xiang Xiao
1e3914ec9d rptun: Remove the unused shmemname field and argument
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2024-02-04 09:54:05 +01:00
Xiang Xiao
43d51cd4fc arch: Remove the identity mapping of up_addrenv_va_to_pa and up_addrenv_pa_to_va
and reuse the reuse the implementation from:
drivers/misc/addrenv.c

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2024-02-04 09:54:05 +01:00
Tomáš Pilný
3e85c1886e esp32/dac-one-shot: lower-half driver for ESP32 internal DAC
Enable with ./tools/configure.sh -l esp32-devkitc:dac
DAC channel 0 = GPIO 25
DAC channel 1 = GPIO 26
default path: /dev/dac0

Resolution 8 bits = values 0~255
Voltage: 0~Vref

The reference voltage 'Vref' here is input from the pin VDD3P3_RTC
which ideally equals to the power supply VDD (3.3V).
2024-02-02 09:23:28 -08:00
zouboan
03e90d9311 boards/stm32_bbsram.c: fix some build error when enable BBSRAM 2024-02-02 12:36:20 -03:00
Yanfeng Liu
6594439271 risc-v/nuttsbi: fix weak sbi_late_initialize issues
Weak function sometimes can't have strong implementation linked.
This patch uses NUTTSBI_LATE_INIT config and normal function instead
to avoid those issues.

Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
2024-02-01 21:26:16 -08:00
Huang Qi
bff298ae09 rv-virt: Guard procfs mount with CONFIG_FS_PROCFS
Don't mount procfs if it is not enabled in the kernel configuration.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2024-02-01 16:15:45 -03:00
Huang Qi
dce459767e rv-virt: Add tmpfs mount points
This commit add mount point for tmpfs in the
board_app_initialize function.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2024-02-01 16:15:45 -03:00
Jari Nippula
e40b66bd6f risc-v/mpfs: wrapper for sdio device drivers
Additional mpfs_sdio layer on top of mpfs_emmcsd and mpfs_coremmc
block device drivers to let both block devices be enabled at the
same time.
2024-02-01 02:07:32 -08:00
SPRESENSE
708ae8e8d8 boards: cxd56xx: Add geoid to cxd5610 gnss driver
Support the output of geoidal heights for cxd5610 gnss driver.
2024-01-30 20:58:06 -08:00
GC2020
6308a53274 Added the comments of bringup() under gd32fxxx.h, modified the compilation options of the makefile, and modified the execution logic of the board_late_initialize(), which is consistent with the stm32 series. 2024-01-30 17:50:31 -08:00
GC2020
95de7b8420 Fix the call logic of the gd32f4xx_appinit.C and gd32f4xx_bringup.C of the GD32 series microcontroller in the project, which is unified with the STM32 series chip in the warehouse. 2024-01-30 17:50:31 -08:00
wangyongrong
201a040f56 defconfig: change CONFIG_RPTUN_PING to CONFIG_RPMSG_PING
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
2024-01-30 04:08:59 -08:00
Eren Terzioglu
3b7ec79c75 Fix sotest build error for esp32c6 2024-01-30 08:32:05 +01:00
Eren Terzioglu
d1db1810ad risc-v/espressif: Rename espressif/esp32c3 as esp32c3
risc-v/espressif: Rename espressif/esp32c6 as esp32c6
risc-v/espressif: Rename espressif/esp32h2 as esp32h2
2024-01-30 08:32:05 +01:00
Eren Terzioglu
c8d7c81cb9 risc-v/esp32c3: Rename legacy approach esp32c3 as esp32c3-legacy 2024-01-30 08:32:05 +01:00
Eren Terzioglu
4c4d62ff93 Rename espressif folder as common/espressif 2024-01-30 08:32:05 +01:00
Eren Terzioglu
721c37a876 risc-v/esp32c6: Remove duplicated esp32c6 implementation 2024-01-30 08:32:05 +01:00
raiden00pl
535a3dbb18 boards/{nrf52840-dk| nrf52840-dk}: use TIMER1 as hardware timer
TIMER0 is reserved for SoftDevice and will be reserved for IEEE 802.15.4
so it's better to use another timer by default
2024-01-28 09:46:29 -08:00
raiden00pl
5e3326be68 boards/nrf52/common/nrf52_progmem.h: fix comment 2024-01-28 09:46:24 -08:00
Yanfeng Liu
bb63f8f36d risc-v/canmv230: add CMake support
Adding CMakeLists.txt files to support CMake build system.
Note that only FLAT build works now due to limitations of current
CMake build system.

Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
2024-01-27 00:56:57 -08:00
ThomasNS
26ffb1f568 add xmc4800-relax to nuttx 2024-01-26 19:14:33 -08:00
raiden00pl
a12fdd8876 cosmetic changes after pci code rebase 2024-01-25 09:09:30 -08:00
raiden00pl
2e758f33ee fix various compilation errors after pci code rebase 2024-01-25 09:09:30 -08:00
raiden00pl
50f7e96e5e boards/x86_64: refresh earlyfb and pcitest configurations 2024-01-25 09:09:30 -08:00
Brennan Ashton
0ed4123326 x86_64: Early framebuffer console
This adds support for creating an early frame buffer and primatives for
writing to this frame buffer as a console. This does require the font
infrastructure as well as multiboot2.

Additionally this can now be used with a UEFI bootloader long as it
boots NuttX via Multiboot2.  There does seem to be a PCI interrupt
issue when running in UEFI mode.

I was able to boot my laptop using this and see PCI devices enumerate.

Signed-off-by: Brennan Ashton <bashton@brennanashton.com>

x86_64: Add conditionals around the multiboot framebuffer
2024-01-25 09:09:30 -08:00
Brennan Ashton
69ed5bb67d Various fixes for PCI work
Squashed commits:

1. Porting prior PCI work in place of jailhouse code

At this point the PCI enumeration works for x86_64 including over
pci-pci bridges.

Running QEMU with this configuration we see the bridge and the
device on the bridge.  It also detected the qemu test device

qemu-system-x86_64 \
  -cpu host,+pcid,+x2apic,+tsc-deadline,+xsave,+rdrand \
  --enable-kvm -smp 1 -m 2G -cdrom boot.iso --nographic -no-reboot \
  -device pci-testdev \
  -device pci-bridge,id=bridge0,chassis_nr=2 \
  -device e1000,bus=bridge0,addr=0x3

qemu_pci_init: Initializing PCI Bus
pci_probe_device: [00:00.0] Found 8086:1237, class/revision 06000002
pci_probe_device: [00:01.1] Found 8086:7010, class/revision 01018000
pci_probe_device: [00:01.2] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.3] Found 8086:7113, class/revision 06800003
pci_probe_device: [00:01.4] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.5] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.6] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.7] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:02.0] Found 1234:1111, class/revision 03000002
pci_probe_device: [00:03.0] Found 8086:100e, class/revision 02000003
pci_probe_device: [00:04.0] Found 1b36:0005, class/revision 00ff0000
pci_probe_device: [00:04.0] Probing
pci_check_pci_bridge: [00:05.0] Found Bridge
pci_probe_device: [01:03.0] Found 8086:100e, class/revision 02000003
pci_probe_device: [00:05.0] Found 1b36:0001, class/revision 06040000

2. Remove unused CONFIG_PCI_MAX_BDF option

3. Add a workaround for Jailhouse pci scanning

4. Extend BAR parsing and handle PIO and MMIO for pci-testdev

Signed-off-by: Brennan Ashton <bashton@brennanashton.com>

5. PCI: Add initial support for QEMU 'edu' test device

Signed-off-by: Brennan Ashton <bashton@brennanashton.com>

6. Bring up PCI later in boot process

Signed-off-by: Brennan Ashton <bashton@brennanashton.com>

7. Add ISR and DMA support to QEMU edu test pci device

Signed-off-by: Brennan Ashton <bashton@brennanashton.com>

8. Fix bad function prototype definition in qemu_edu

9. intel64:  Add a pci test configuration and instructions

Signed-off-by: Brennan Ashton <bashton@brennanashton.com>

10. PCI: Fix issue in identification of 64bit bar

Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
2024-01-25 09:09:30 -08:00
Yang Chung-Fan
18f97bf2f8 pcie: add framework
Squashed commits:

1. x86_64: qemu: implement pci-e functions and enumerate pci-e devices on boot

2. virt: add qemu pci-testdev driver

3. pcie: types array should be null terminated

4. pcie: enable don't take flags, hardcoded enabling flags

5. pcie: checking bar > 4 for 64bit bars are sufficient

6. pcie: qemu: remove not used header

7. pcie: qemu: return -EINVAL if buffer argument is NULL

8. pcie: make pcie enumerate routine as common instead of architecture dependent

9. pcie: cosmetic changes to fit check tools

10. pcie: create MSI/MSIX related marcos and simplify the msi/msix routines
2024-01-25 09:09:30 -08:00
Tiago Medicci Serrano
641a0df27f esp32s3: Improve selection of the bootloader being used on Kconfig
- A pre-built IDF bootloader is used by default;
- `ESP32S3_PARTITION_TABLE` requires the IDF bootloader to be built
from sources.
- Native MCUboot also can be used to boot the device. It will be
built from sources and depends on !ESP32S3_PARTITION_TABLE.
2024-01-25 11:22:39 -03:00
Tiago Medicci Serrano
1e1ea7bb5d esp32s2: Improve selection of the bootloader being used on Kconfig
- A pre-built IDF bootloader is used by default;
- `ESP32S2_PARTITION_TABLE` requires the IDF bootloader to be built
from sources.
- Native MCUboot also can be used to boot the device. It will be
built from sources and depends on !ESP32S2_PARTITION_TABLE.
2024-01-25 11:22:39 -03:00
Tiago Medicci Serrano
ec3714c816 esp32: Improve selection of the bootloader being used on Kconfig
- A pre-built IDF bootloader is used by default;
- `ESP32_PARTITION_TABLE` requires the IDF bootloader to be built
from sources.
- Native MCUboot also can be used to boot the device. It will be
built from sources and depends on !ESP32_PARTITION_TABLE.
2024-01-25 11:22:39 -03:00
Almir Okato
f8b0b06b97 esp32c3-generic: add simple boot support
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.

This commit also makes this bootloader configuration as default
for esp32c3-generic target and removes the need for running
'make bootloader' command for it.

Signed-off-by: Almir Okato <almir.okato@espressif.com>
2024-01-23 04:09:25 -08:00
Lee Lup Yuen
62c358946d risc-v/bl808: Flush MMU Cache after updating SATP
Ox64 BL808 crashes with a Page Fault when we run `getprime` then `hello`. This is caused by the T-Head C906 MMU incorrectly accessing the MMU Page Tables of the Previous Process (`getprime`) while starting the New Process (`hello`).

To fix the problem, this PR flushes the MMU Cache whenever we point the MMU SATP Register to the New Page Tables. We execute 2 RISC-V Instructions that are specific to T-Head C906:

- DCACHE.IALL: Invalidate all Page Table Entries in the D-Cache
- SYNC.S: Ensure that all Cache Operations are completed

This is derived from the T-Head Errata for Linux Kernel. More details here: https://lupyuen.github.io/articles/mmu#appendix-flush-the-mmu-cache-for-t-head-c906

Modified Files:

- `arch/risc-v/src/common/riscv_mmu.h`: If needed, `mmu_write_satp()` calls `mmu_flush_cache()` (weak function) to flush the MMU Cache. (Like for T-Head C906)

- `arch/risc-v/src/bl808/bl808_mm_init.c`: Flush the MMU Cache for T-Head C906. Extend `mmuflags` from 32-bit to 64-bit to be consistent with `mmu_ln_setentry()`.

- `boards/risc-v/bl808/ox64/configs/nsh/defconfig`: Enable `ostest` in the Build Config. Update `CONFIG_BOARD_LOOPSPERMSEC` according to `calib_udelay`.
2024-01-23 01:25:20 -08:00
Masayuki Ishikawa
78d22b997c boards: rv-virt: Fix the hello app crash with nsh64
Summary:
- I noticed that the hello app crashes due to
  https://github.com/apache/nuttx/pull/11576
- This is a tentative fix to avoid the crash

Impact:
- None

Testing:
- Tested with qemu-8.2.0

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2024-01-22 23:18:43 -08:00
Yanfeng Liu
b46ee08230 rv-virt/configs: avoid build errors
- disable NSH_SYMTAB to avoid build errors with cmake.
- enable LIBM to avoid build errors with Ubuntu stock
  gcc-riscv64-unknown-elf toolchain.
- use HELLO=y for easy use within qemu console.

Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
2024-01-22 08:18:04 +01:00
Tiago Medicci Serrano
282feec9a3 esp32-devkitc/mcuboot_update_agent: Update defconfig
Espressif's MCUboot should be built from sources.
2024-01-21 06:33:25 -08:00
w2016561536
829ec6d5e4 esp32s3/pwm: Fix pwm output
1. Fix pwm output always low problem.
2. Add multi channel support in defconfig
2024-01-17 22:42:08 -03:00
Yanfeng Liu
87c9a0ee76 risc-v/k230: add NUTTSBI based kernel build support
Previously k230 kernel build needs OpenSBI wrapping for use on
target, thus leading to larger program and memory overheads.
This patch adds alternative small overhead kernel build support.

Changes:

- in arch/risc-v/src/k230:
  - k230_head.S          entrance renamed for sake of NUTTSBI
  - k230_irq.c           add M-mode handling for NUTTSBI case
  - k230_mm_init.c       add L3 table for smaller RAM case
  - hardware/k230_plic.h add PLIC_CTRL definition
  - Make.defs            use CHIP_ASRCS to fix entrance selection
- in boards/risc-v/canmv230/scripts:
  - Make.defs            add support for NUTTSBI case

Additions:

- in boards/riscv/canmv230/:
  - scripts/ld-nuttsbi.script  link script for NUTTSBI case
  - configs/nsbi/defconfig     config for NUTTSBI case

The artifact nuttx.bin from this configuration can be used directly
on target as OpenSBI wrapping is not needed.

Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>

fix typo
2024-01-17 10:31:29 -03:00
w2016561536
6a0eeb1b3e esp32s3/spi: Add SPI bus init in bringup and fix SPI bus 2 and 3 conflict
1. Add spi bus init in esp32s3_bringup.c
2. Fix IOMUX conflict between spi bus 2 and 3
3. Add spi defconfig
4. Follow the standard of NuttX
2024-01-17 09:29:20 -03:00
Lwazi Dube
1349dcfc1f drivers/usbhost: Add a USB bluetooth driver.
This change adds support for the USB Transport Layer as described
in the bluetooth spec. Isochronous endpoints are not yet supported.
Because of limitations in the NuttX bluetooth stack, only one USB
device can be used. This driver will only allow one USB dongle to
use bluetooth.

A Laird USB BT4.2 dongle (from Mouser) was used for testing:
M/N BT851 1.0 1829, FCC ID:SQGBT850
lsusb: 04b4:f901 Cypress Semiconductor Corp. CYW20704A2

The following commands were used to test from the nsh prompt:
bt bnep0 scan start
bt bnep0 scan stop
bt bnep0 scan get
bt bnep0 info

The Linux gatttool was used to connect over wireless.

With the BDAddr found by "bt bnep0 info", start gatttool using:
gatttool -b BDAddr -I

Connect to the device using:
connect

Read the device name using the GAP device name UUID:
char-read-uuid 2a00

Part of the response is:
value: 41 70 61 63 68 65 20 4e 75 74 74 58
which is the string "Apache NuttX"
2024-01-16 16:02:15 +01:00
chao an
0cb09ce0ab sim/usbdev: refresh defconfig to fix ci break
Signed-off-by: chao an <anchao@lixiang.com>
2024-01-15 22:31:39 -08:00
Xiang Xiao
d2c4de6167 board: Add CONFIG_LIBC_EXECFUNCS and CONFIG_PSEUDOTERM to adb config
required by https://github.com/apache/nuttx-apps/pull/2257

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2024-01-15 17:14:51 +08:00
chao an
45cca933f8 CMake: arm/armv8-r: init armv8-r cmake build
Test cmake build on aarch32 fvp:
$ cmake -B build -DBOARD_CONFIG=fvp-armv8r-aarch32/nsh -GNinja
$ cmake --build build

Signed-off-by: chao an <anchao@lixiang.com>
2024-01-15 00:46:52 -08:00
Lwazi Dube
d13065468e boards/sama5d3-xplained: Add USB mouse initialization. 2024-01-11 18:29:30 -08:00
Yanfeng Liu
a9372627d8 risc-v/rv-virt: use fully linked apps for kernel build
Fully linked apps take less storage and are efficient to load. This
is to enable them for rv-vrit configurations in KERNEL build.

Changes:

- arch/risc-v/Kconfig       select BINFMT_ELF_EXECUTABLE for QEMU-RV
- boards/risc-v/qemu-rv/rv-virt/configs
  - knsh32/defconfig        enable ELF_EXECUTABLE, LIBM, OSTEST
  - knsh64/defconfig        enable ELF_EXECUTABLE, LIBM, OSTEST
  - ksmp64/defconfig        enable ELF_EXECUTABLE, LIBM, OSTEST
  - knetnsh64/defconfig     enable ELF_EXECUTABLE, LIBM, OSTEST
  - knetnsh64_smp/defconfig enable ELF_EXECUTABLE, LIBM, OSTEST

Additions:
- boards/risc-v/qemu-rv/rv-virt/scripts/
  - gnu-elf.ld              apps linker script

The ARCH_TEXT_VBASE of knsh32 is set to same as that of 64bit to reuse
the apps linker script.

Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
2024-01-11 00:51:07 -08:00
Yanfeng Liu
da365c1cb0 risc-v/canmv230: enable fully linked apps for kernel build
Previously apps in kernel build are partially linked, thus are
big and inefficient. This enables full link for kernel mode apps
to reduce size and speed up loading.

Changes:

- arch/risc-v/Kconfig          select HAVE_ELF_EXECUTABLE for K230
- boards/../scripts/Make.defs  adjust LDELFLAGS
- boards/../knsh/defconfig     enable BINFMT_ELF_EXECUTABLE

Additions:
- boards/../scripts/gnu-elf.ld apps linker script

Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
2024-01-10 23:27:46 -03:00
Tiago Medicci Serrano
f4485a58e3 esp32s3_devkit/sta_softap: Reenable SMP on defconfig.
This reverts commit e25fcb3bd5.
The issue - related to a deadlock in the RT-Timer - was properly
solved.
2024-01-11 09:22:52 +09:00
fangxinyong
c479ccb8aa sched: move etc romfs mount from nsh to sched/init
Usually the startup script is placed under /etc. The contents of the etc directory
are compiled and linked with Nuttx binary in the form of romfs. After startup,
it will be  mounted by Nsh.

etc is generated by the different boards, that use genromfs and xxd tools to generate
and compile it into the Nuttx, for example: boards/arm/at32/at32f437-mini/tool/mkromfs.sh
The more common method is etc image generated from the content in the corresponding
board/arch/board/board/src/etc directory, and added by Makefile for example:
boards/sim/sim/sim/src/etc.

But in kernel/protected mode, Nuttx kernel and apps are run in different privileged/
non-privileged mode or the isolated binarys, so as that nsh should use syscall to
access Nuttx kernel by exported API. In this scenario, nsh can not mount the etc image
content, because that is generated in board and as a part of Nuttx kernel.

changes:

- move etc romfs mount from nsh to Nuttx, but keep the script to parse and execute.
- move and rename the related CONFIG, move customized nsh_romfsimg.h to etc_romfs.c
  in boards, and no need declaration for romfs_img/romfs_img_len.

This commit changes and updates all configurations in Nuttx arch/board as much as possible,
but if any missing, please refer to the following simple guide:

- rename CONFIG_NSH_ROMFSETC to CONFIG_ETC_ROMFS, and delete CONFIG_NSH_ARCHROMFS in defconfig
- rename the etc romfs mount configs, for example CONFIG_NSH_FATDEVNO to CONFIG_ETC_FATDEVNO
- move customized nsh_romfsimg.h to etc_romfs.c in board/arch/board/board/src and no need
  declaration for romfs_img/romfs_img_len.
- delete default nsh_romfsimg.h, if ROMFSETC is enabled, should generate and compile etc_romfs.c
  in board/arch/board/board/src.

Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
2024-01-09 21:29:46 -03:00
Yanfeng Liu
dd1365ef85 risc-v/canmv230: add PROTECTED build support
Additions:

- In arch/risc-v/src/k230/
  - k230_userspace.c      add user space initialization
  - k230_userspace.h      headers for user space initialization
- In boards/risc-v/k230/canmv230/kernel/
  - k230_userspace.c      userspace_s const data definition
  - Makefile              pass1 Makefile
- In boards/risc-v/k230/canmv230/scripts/
  - ld-protected.script   linker script for protected build kernel
  - ld-userland.script    linker script for protected build userspace
- In boards/risc-v/k230/canmv230/configs
  - pnsh/defconfig        defconfig for protected build

Changes:

- In arch/risc-v/src/k230/
  - k230_start.c          add protected build handling logic
  - Make.defs             add protected build support
- In boards/risc-v/k230/canmv230/scripts/
  - Make.defs             add protected build support
- In Documentation/platforms/risc-v/k230/boards/canmv230/
  - index.rst             add protected build usage

Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
2024-01-08 19:46:42 -03:00
Bowen Wang
514f020ace nucleo-h745zi/stm32_bringup.c: the cpuname should be the remote cpu name
The share memory name should be same, and the cpuname is the remote
cpu name.

Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
2024-01-08 19:53:54 +01:00
Rodrigo Sim
21b02f176f stm32f401rc-rs485: Add rs-485 support 2024-01-07 17:15:59 -08:00
Rodrigo Sim
7b9b630073 nucleo-l432kc: Fix board configuration for USART2 2024-01-07 17:12:15 -08:00
Yanfeng Liu
b516b29efc risc-v/k230: revise CanMV230 kernel build support
changes:
- under boards/risc-v/k230/canmv230/scripts/:
  - Make.defs           add POSTBUILD actions
  - ld-flat.script      minor reformating
  - ld-kernel.script    minor reformating
- under boards/risc-v/k230/canmv230/src/:
  - Makefile            add clean of generated ROMFS source
  - canmv_init.c        use `ferr` and drop too late runtime warning
  - romfs_stub.c        use const for romfs_img_len

The POSTBULD actions can warn stub ROMFS usage at build time, thus
the too late warning in canmv_init.c can be removed.
The cleaning of `libboard.a` in POSTBUILD can also ensure real ROMFS
is in use, as some times weak_data is still in use.

Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
2024-01-07 06:40:10 -08:00
Bowen Wang
ce16288494 qemu_bringup: add tmppfs mount for qemu-armv8a
tmpfs can be used for the rpmsgfs test after the qemu rptun driver
added.

Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
2024-01-04 20:06:11 -08:00
Yanfeng Liu
7cb8e590a1 risc-v/k230: kernel build for CanMV-K230 board
Changes:

- Documentation/platforms/risc-v/k230  revised for both modes
- arch/risc-v/include/k230/irq.h       add S-mode IRQs
- under arch/risc-v/src/k230 folder:
  - Make.defs                          drop use of k230_exception_m.S
  - hardware/k230_clint.h              add S-mode defs, revised freq
  - k230_head.S                        unified flat/kernel mode support
  - k230_irq.c                         add S-mode support with debug dump
  - k230_mm_init.c                     revised for K230 S-mode
  - k230_start.c                       revised for flat/s-mode,
- arch/risc-v/src/k230/k230_timerisr.c unified flat/s-mode support.
- under boards/risc-v/k230/canmv230 folder:
  - configs/nsh/defconfig              fix RAM size
  - include/board_memorymap.h          cleanup for S-mode
  - src/.gitignore                     ignore romfs_boot.c
  - src/Makefile                       add romfs support

Renames:

- under boards/risc-v/k230/canmv230/src/ folder:
  - canmv_init.c from k230_appinit.c   making room for more k230 devices

Dropped:

- under arch/risc-v/src/k230/
  - k230_exception_m.S                 as hybrid mode not ready yet.

New files in boards/riscv/k230/canmv230:

- configs/knsh/defconfig                S-mode config
- scripts/ld-kernel.script              S-mode linker script
- src/romfs.h                           User space ROMFS defs needed in S-mode
- src/romfs_stub.c                      Stub ROMFS image

Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
2023-12-31 07:26:45 -08:00
Xiang Xiao
b9bd88d9d3 rptun: Select OPENMAP under RPTUN
to simplify the IPC related configuration

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-12-28 11:08:57 +08:00
xuxin19
524425573e CMake:init arm64 CMake qemu-armv8a build
this patch contains arm64 Toolchain, arch common, qemu board and arm64 libc modifications.
support using CMake to compile the qemu executable file.

```
 cmake -B build -DBOARD_CONFIG=qemu-armv8a:nsh -GNinja
 cmake --build build -t menuconfig
 cmake --build build
 qemu-system-aarch64 -cpu cortex-a53 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
```
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
2023-12-27 07:27:17 -08:00
yinshengkai
9852428953 fs: procfs add poll support
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2023-12-26 19:23:13 -08:00
Tiago Medicci Serrano
47e71fc449 esp32s2/rmt: Use the Espressif's common RMT driver.
This commit use the new common RMT driver for all Espressif's
xtensa-based chips on ESP32-S2.
2023-12-24 16:38:06 -08:00
Tiago Medicci Serrano
6234224325 esp32s2: Integrate Espressif HAL repository to ESP32-S2
By integrating the Espressif`s HAL repository into the current
ESP32-S2 implementation on NuttX, it is possible to call functions
that makes it easier to setup the registers of the ESP32-S2,
enabling the usage of common Espressif drivers.
2023-12-24 16:38:06 -08:00
Tiago Medicci Serrano
000bf2a7c7 esp32s3/rmt: Use the Espressif's common RMT driver.
This commit use the new common RMT driver for all Espressif's
xtensa-based chips on ESP32-S3.
2023-12-24 16:38:06 -08:00
Tiago Medicci Serrano
1ca460c89a esp32s3: Fully integrate Espressif HAL repository to ESP32-S3
By integrating the Espressif`s HAL repository into the current
ESP32-S3 implementation on NuttX, it is possible to call functions
that make it easier to set up the registers of the ESP32-S3 and
enables the usage of common Espressif drivers. Please note that
Espressif's HAL repository was already being used for the Wi-Fi
driver. Then, this commit includes other source files to be used
by other drivers other than Wi-Fi and reorganize the build process.
2023-12-24 16:38:06 -08:00
Tiago Medicci Serrano
fcff5d43b7 drivers/rmt: Implement an upper-half RMT character driver
The RMT (Remote Control) character driver allows to use the RMT
peripheral (usually, a one-wire peripheral dedicated to driving
IR remote control) as a character driver.

Please note that this perpiheral depends on the lower-half specific
driver implementation.
2023-12-24 16:38:06 -08:00
Eren Terzioglu
c15392d9b7 xtensa/esp32s2: Add xtwdt and rwdt support 2023-12-22 03:59:18 -08:00
Tiago Medicci Serrano
34a6dddb7a boards/esp32s2: Increase init task stack size to 3072
This is done to avoid casual stack overflows.
2023-12-20 06:59:18 -08:00
Xiang Xiao
d267071398 stm32f4discovery/cxxtest: Fix gcc13.2 compiler error
arm-none-eabi-ld: /tools/gcc-arm-none-eabi/bin/../lib/gcc/arm-none-eabi/13.2.1/../../../../arm-none-eabi/lib/thumb/v7e-m/nofp/libsupc++.a(eh_alloc.o): in function `_GLOBAL__sub_I__ZN9__gnu_cxx9__freeresEv':
eh_alloc.cc:(.text.startup._GLOBAL__sub_I__ZN9__gnu_cxx9__freeresEv+0x12): undefined reference to `getenv'

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-12-19 08:36:49 +08:00
Eren Terzioglu
9473267620 risc-v/esp32c6: Add ostest defconfig 2023-12-18 11:10:53 -08:00
Tiago Medicci Serrano
65d736bfc1 esp32<|s2|s3>_board_spiflash: Substitute fs messages to syslog
Once these messages are thrown during the system's bring-up, it is
advisable them to be output by the syslog considering the file
system initialization.
2023-12-18 09:01:15 -08:00
Tiago Medicci Serrano
908bac55f3 esp32<|s2|s3>_board_spiflash: Fix error message about SmartFS init
The SmartFS partition needs to be formatted before being mounted.
Otherwise, it would throw an error message. The error message now
contains a suggestion to format the partition when such an error
is detected.
2023-12-18 09:01:15 -08:00
Yanfeng Liu
75d0c2946d risc-v: Initial support for CanMV-k230 board and K230 chip
The code is mainly derived from the NuttX qemu-rv/rv-virt codebase.

Major changes:

- boards/Kconfig:       add new BOARD_K230_CANMV
- arch/risc-v/Kconfig:  add new CHIP_K230 chip and ARCH_RV_MMIO_BITS
- arch/risc-v/src/common/riscv_mtimer.c: use ARCH_RV_MMIO_BITS to
                        select MMIO access width

New additions:

- arch/risc-v/include/k230/: k230 SoC definitions
- arch/risc-v/src/k230/:     k230 SoC sources
- boards/risc-v/k230/canmv230/:  CanMV-K230 board sources and configs
- Documentation/platforms/risc-v/k230/: simple doc

Note that only FLAT build works for canmv230 now.

This PR has changes in RiscV common layer thus may affect other RiscV ports
It changes the mtime/mtimecmp access control from using config ARCH_RV64 to
newly intorduced config ARCH_RV_MMIO_BITS.

Original design uses ARCH_RV64 to select 64bit MMIO in riscv_mtimer.c, this
can't cope with the situation with K230 --- it has ARCH_RV64 but only can do
32bit MMIO. So a new ARCH_RV_MMIO_BITS config has been introduced. Its value
depicts the MMIO width in bits. The MMIO_BITS defaults to 32/64 for RV32/
RV64 respectively. This allows the macro to replace current use of ARCH_RV64
in riscv_mtimer.c.

The new MMIO_BITS config is a derived one, and for RiscV chips with
equal CPU and MMIO widths there is no need to explicitly set it as the
default rule will do that. Only chips with different CPU and MMIO widths
need set it in Kconfig.

So by design this change should be safe but RiscV ports should be checked.

"ostest" verification has been done for:

- canmv230/nsh
- rv-vivt/nsh
- rv-virt/nsh64

configuration generation and manual check of derived RV_MMIO_BITS has been
done for:

- star64/nsh
- arty_a7/nsh
- bl602evb/nsh

Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
2023-12-17 01:10:57 -08:00
Lee Lup Yuen
87c1b81857 boards/riscv: Add support for PINE64 Ox64 BL808 SBC
This PR adds support for PINE64 Ox64 64-bit RISC-V SBC, based on Bouffalo Lab BL808 SoC (T-Head C906 Core). Most of the code is derived from NuttX for Star64 JH7110. The source files are explained in the articles here: https://github.com/lupyuen/nuttx-ox64

### Modified Files

`boards/Kconfig`: Added Ox64 board

### New Files in boards/risc-v/bl808/ox64

`src/bl808_appinit.c`: Startup Code

`include/board.h`: Ox64 Definitions

`include/board_memorymap.h`: Memory Map

`src/etc/init.d/rc.sysinit`, `rcS`: Startup Script

`src/.gitignore`: Ignore the tmp filesystem

`scripts/ld.script`: Linker Script

`scripts/Make.defs`: Ox64 Makefile

`src/Makefile`: Ox64 Makefile

`Kconfig`: Ox64 Config

`configs/nsh/defconfig`: Build Config for `ox64:nsh`

### Updated Documentation

`platforms/risc-v/bl808/index.rst`: New page for Bouffalo Lab BL808 SoC

`platforms/risc-v/bl808/boards/ox64/index.rst`: Building and booting NuttX for Ox64

`platforms/risc-v/jh7110/boards/star64/index.rst`: Fix typo
2023-12-15 18:52:16 -08:00
Xiang Xiao
e920883458 syslog/ramlog: Prepare to support the multiple reader
1.Remove RAMLOG_OVERWRITE option and related code
2.Broadcast the readability to all reader and poller

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-12-14 20:50:44 -08:00
simbit18
c494ce4a96 Update kconfig2html.c
Fix nuttx coding style
2023-12-14 20:02:52 -08:00
Masayuki Ishikawa
80ca3e9308 boards: rv-virt: Add virtio-sound
Summary:
- Add virtio-sound to the following configs
  netnsh, netnsh_smp, netnsh64, netnsh64_smp

Impact:
- None

Testing:
- nxplayer works on qemu-8.2.0-rc3 (ubuntu-20.04 amd64)

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-12-14 20:01:25 +08:00
Masayuki Ishikawa
659c9e7f4b boards: qemu-armv8a: Add virtio-sound
Summary:
- Add virtio-sound to the following configs
  netnsh, netnsh_smp, netnsh_hv, netnsh_smp_hv

Impact:
- None

Testing:
- nxplayer works on qemu-8.2.0-rc3 (ubuntu-20.04 amd64, macOS13.6 M1/MBP)
- NOTE: raspi3b+ (ubuntu-20.04 server) has a noise issue

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-12-14 20:01:25 +08:00
GD32-MCU
9a2569882e fix bug in gd32f4xx_serial.c, add romfsimg.h, gd32f4xx_reset and improve gd32f4xx_gpio.c for f470z board, add board decription for f470
add gd32f470 picture
2023-12-13 23:27:23 -08:00
chenwen@espressif.com
62a6a0ab4d xtensa/esp32s3: Tasks use SPIRAM as stack can do SPI flash read/write/erase/map/unmap
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
2023-12-12 22:10:38 -08:00
Xiang Xiao
ca5a9c711a Remove @ and % tag from all comments
and format the multiple line comments

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-12-11 17:00:10 -03:00
anjiahao
8c4e17953e board/stm32: add demo for gdbstub
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2023-12-11 08:43:26 -08:00
anjiahao
25f599fe31 add demo for record stack defconfig
xtensa: esp32s3-devkit:stack
arm: stm32f429i-disco:stack

Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2023-12-11 02:06:51 -08:00
anjiahao
7dfbd14eba libc: add instrument api support
Add registration function instrumentation API,
which can achieve instrumentation of entering and
exiting functions through the compiler's functionality.

We can use CONFIG_ARCH_INSTRUMENT_ALL to add instrumentation for all
source, or add '-finstrument-functions' to CFLAGS for Part of the
source.

Notice:
1. use CONFIG_ARCH_INSTRUMENT_ALL must mark _start or entry noinstrument_function,
   becuase bss not set.
2. Make sure your callbacks are not instrumented recursively.

use instrument_register to register entry function and exit function.
They will be called by the instrumented function

Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2023-12-11 02:06:51 -08:00
anjiahao
35051dd715 coredump: support coredump save to block device when crash
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2023-12-10 07:02:03 -08:00
anjiahao
542a5555d3 libc:add parse_memory_range to parse memory string
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2023-12-10 07:02:03 -08:00
Jorge Guzman
c5dfb9f606 linum-stm32h753bi: Updating documentation for modbus_slave example.
Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
2023-12-09 22:26:40 -08:00
simbit18
3442af4a19 Fix Kconfig style
Remove extra TABs
Add comments
2023-12-09 13:44:46 -08:00
Dong Heng
bf54a5ae50 driver/net/lan9250: Add LAN9250 driver(SPI and QSPI mode) 2023-12-07 19:53:05 -08:00
YAMAMOTO Takashi
cc0dd4c8a4 add esp32s3-devkit:toywasm kconfig 2023-12-07 08:21:39 -08:00
David Sidrane
d31214aa25 stm32h7:ADC STM32_RCC_D3CCIPR_ADCSEL->STM32_RCC_D3CCIPR_ADCSRC 2023-12-07 03:50:40 -08:00
Peter van der Perk
9906163beb Base IMXRT1170 port
Co-authored-by: Jari van Ewijk <jari.vanewijk@nxp.com>

Co-authored-by: David Sidrane <david.sidrane@nscdg.com>

Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>

imxrt:Kconfig fix formatting

imxrt:usbphy move IMXRT_USBPHY{1|[2]}_BASE to memory map

imxrt:lpspi Fix build breakage from adding 1170

imxrt:Finish 1170 iomux and clockconfig versioning

imxrt:Remove duplicate imxrt_clock{off|all}_lpi2c4

imxrt:pmu remove duplicate dcd non 117x header

imxrt:lpspi Fix unused var warnings

imxrt:lpi2c Fix unused var warnings

imxrt:lowputs Fix unused var warnings

imxrt:imxrt117x_dmamux fix duplicate entries

imxtr:serial Use IOMUX_PULL_{UP|DOWN} and map IOMUX V1 to them

imxrt:MPU Support the 1170

imxrt:dmamux Alias IMXRT_DMAMUX0_BASE as IMXRT_DMAMUX_BASE

imx1170:ccm Alias CCM_CCGR_DMA & CCM_CCGR_SNVS_LP for compatiblity

Author: Peter van der Perk <peter.vanderperk@nxp.com>

IMXRT7 Add LPUART 9/10/11/12 support

Author: David Sidrane <david.sidrane@nscdg.com>

imxrt:1170pinmux Add QTIMER pins

imxrt:1170pinmux Add GPT pins

imxrt:1170pinmux Add FLEXPWM pins

imxrt1170:pinmap Add GPIO_ENET_1G pinning

imxrt:enet Support ENET_1G

imxrt:periphclks rt1170 does not have canX_serial clock

imxrt:flexcan:Layer imxrt_ioctl

imxrt117x:memorymap added CAN3

imxrt:ADC support ver1 and ver2 for imxrt117x

imxrt:imxrt117x_ccm Align timer naming with other imxrt QTIMERn->TIMERn

imxrt:imxrt117x_ccm align CCM names with rt106x

imxrt:XBAR support larger number of selects needed on imxrt1170

Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>

FlexSPI AHB Region support, PIT rename for compatiblity

imxrt:USB Analog add VBUS_VALID_3V

FlexSPI expand prefetch registers for IMXRT117X

imxrt:Support Initialization of FlexRam without Running from OCRAM

imxrt: ocotp add UNIQUE_ID register definition

imxrt: enet use ocotp unique_id

imxrt: enet fixes for imxrt117x

imxrt: ethernet pinmux sion enable

imxrt:imxrt_periphclk_configure add memory sync

   Flush the pipeline to prevent bus faults, by insuring a
   peripheral is clocked before being accessed on return from
   this function.

imxrt:Restructure gpioN to padmux mapping

imxrt:Add imxrt1170 daisy

imxrt: correct power modes for imxrt117x fixing hang on WFI

imxrt: imxrt117x TCM MPU config

imxrt: FlexRAM clocking DIV0 setup

imxrt: 117x periphclocks wait for status bit

imxrt: iomucx set pad settings correctly and allow reconfiguration

imxrt: enet align buffers 64-byte for optimal performance

Add DSC barriers for write-through cache support

imxrt: imxrt1170 use FlexCAN FD/ECC features

imxrt:iomuxc_ver2 (117x) SD_B1 and DISP_B1 use PULL feild not PUE/PUS

imxrt:Fix 1170 SNVS addressing

imxrt: enet set mii clock after ifdown so that phy keep working

nxstyle fixes

imxrt: preprocessor and include fixes

Fix configs

imxrt1170-evk clean defconfig
2023-12-07 03:48:19 -08:00
wangmingrong
02936df943 stm32h7: fix config conflict
if defined(CONFIG_NSH_LIBRARY) && !defined(CONFIG_BOARDCTL) conflict

Signed-off-by: wangmingrong <wangmingrong@xiaomi.com>
2023-12-06 07:57:14 -08:00
zhangjun21
c16da15943 cmake: add matter defconfig file for sim
Signed-off-by: zhangjun21 <zhangjun21@xiaomi.com>
2023-12-06 07:56:17 -08:00
simbit18
ccc0c54401 Fix Kconfig style
Remove extra TABs
Remove spaces from Kconfig
Add comments
2023-12-04 22:20:50 +08:00
Rodrigo Sim
ce4c70690f stm32f401rc-rs485: Add eeprom support 2023-12-04 00:34:14 -08:00
Xiang Xiao
6783051aed Fix the wrong comment banner
"Private Type"->"Private Types"

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-12-03 17:50:35 +01:00
raiden00pl
ac5c47fcb6 nrf52832-dk: add timer example 2023-12-03 05:47:07 -08:00
Eren Terzioglu
9c793067cc xtensa/esp32s3: Fix esp32s3 mcuboot ota crash 2023-12-01 18:48:10 -08:00
Eren Terzioglu
5b19d8b2cb xtensa/esp32s2: Add RTC support 2023-11-30 21:02:12 -03:00
Eren Terzioglu
31abcb0e9a xtensa/esp32s3: Add rtc defconfig 2023-11-30 08:58:17 -08:00
chao an
7b1f22ca18 xmc4/spi: fix typo
Signed-off-by: chao an <anchao@xiaomi.com>
2023-11-30 06:16:09 -08:00
Rodrigo Sim
14000d077d seeed-xiao-rp2040: Add initial board support 2023-11-29 19:32:22 -08:00
raiden00pl
74874e0874 boards/sim/nxscope: use default /dev/ttySIM0 path 2023-11-29 18:35:44 -08:00
raiden00pl
47b27321d5 boards/sim/nxscope: remove CONFIG_ALLSYMS=y
this option adds some python dependencies for mkallsyms.py and we don't need it for this example
2023-11-29 18:35:44 -08:00
chenwen@espressif.com
53beaf1a67 xtensa/esp32s3: Add SPIRAM high memory support
1. Configurable mapping of virtual address to psram physical address
  2. Access SPIRAM memory at high physical address through bank switching

Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
2023-11-29 06:33:51 -08:00
chao an
4540dd4718 stm32/clang: enable LIBM avoid build break on clang-17
Signed-off-by: chao an <anchao@xiaomi.com>
2023-11-29 03:58:05 -08:00
Michal Lenc
e852f28710 ci: add open_memestream CI test
CI test for open_memestream() stdio function was added.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2023-11-29 02:13:19 -08:00
Takumi Ando
e11627d0fb boards: Use MS56XX instead of MS5611
Signed-off-by: Takumi Ando <t-ando@advaly.co.jp>
2023-11-28 16:48:50 -03:00
Rodrigo Sim
89ddb2f709 stm32f401rc-rs485: Add sdcard support 2023-11-25 23:16:44 -08:00
Ville Juven
20eb1831b1 rv-virt/knsh: Set correct RAM_START and RAM_SIZE
Also, set RAM_VSTART, because we have vaddr=paddr mapping. Otherwise
RAM_VSTART gets its default value which is 0.
2023-11-24 04:39:25 -08:00
Eren Terzioglu
438cb4a16a xtensa/esp32s3: Add rtc heap support 2023-11-23 16:49:48 -08:00
guotong ma
6c25d2a2f5 fix f401rc flash size. 2023-11-23 08:15:06 -08:00
hujun5
1a65f5ed88 sched_lock refine: remove sched_[un]lock in xxx_waitsample
Signed-off-by: hujun5 <hujun5@xiaomi.com>
2023-11-21 20:03:43 -08:00
halyssonJr
bc64559bac add support to q-enconder 2023-11-21 04:05:41 -08:00
Eero Nurkkala
1cb879773a risc-v/mpfs/opensbi: update opensbi to version 1.3.1
Version 1.3.1 is the latest tagged version as of November
the 21st, 2023.  This patch prepares the required changes
to make v1.3.1 work.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
2023-11-21 04:04:47 -08:00
Xiang Xiao
eddd90de78 poll: pollsetup should notify only one fd passd by caller
since it's redundant to iterate the whole fds array in setup

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-11-21 09:07:17 +01:00
Xiang Xiao
ab2a4838d7 board/sim: Enable the tick lock in smp config
to improve the ci coverage

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-11-19 20:22:50 +01:00
Rodrigo Sim
a3e3e0b1ec stm32f401rc-rs485: Add buttons support 2023-11-18 17:07:32 -08:00
raiden00pl
014029c649 boards: add support for ODrive V3.6 board 2023-11-18 17:07:20 -08:00
Jorge Guzman
46b8b057da linum-stm32h753bi: Add support to RTC and alarm
Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
2023-11-18 18:38:41 -03:00
Bowen Wang
f01f290c3f qemu/config: enable CONFIG_DEV_SIMPLE_ADDRENV for all qemu configs
Enable CONFIG_DEV_SIMPLE_ADDRENV for all the qemu configs that used
the virtio driver to fix compile error when use the NuttX implemented
metal io read/write operations.
Becasue up_addrenv_pa_to_va() and up_addrenv_va_to_pa() are not
implemented by default.

Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
2023-11-17 09:42:52 +01:00
raiden00pl
ca88513a0c boards/nrf9160-dk: enable GNSS for modem_ns config 2023-11-16 20:32:41 -08:00
raiden00pl
c53211afb9 boards/nrf9160-dk: add board specific modem configuration 2023-11-16 20:32:41 -08:00
raiden00pl
b14b8c6db3 boards/thingy91: add board specific modem configuration 2023-11-16 20:32:41 -08:00
Masayuki Ishikawa
991c5029a0 boards: sabre-6quad: Fix cxxtest issue
Summary:
- Fixes a linker issue in https://github.com/apache/nuttx/pull/8244 by disabling compiler optimization.
- Adjusts CONFIG_DEFAULT_TASK_STACKSIZE to 4096 to ensure proper functioning of cxxtest.

Impact:
- The changes may slightly affect performance due to disabled optimizations
  but are necessary for cxxtest stability.

Testing:
- Successfully tested on QEMU-8.1.2 with arm gcc 12.3.Rel1,
  confirming resolution of the linker issue and stable operation of cxxtest.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-11-15 03:52:26 -08:00
raiden00pl
c0ffcca0e8 boards: remove obsolete CONFIG_EXAMPLES_FOC_IPHASE_ADC option 2023-11-15 03:43:25 -08:00
Eren Terzioglu
4033018a72 xtensa/esp32s3: Add XTWDT support 2023-11-14 19:42:33 -03:00
raiden00pl
99513ac23e drivers/foc: return scaling factor for phase currents and BEMF via ioctl
These values are board-specific properties that must be known on the application side.
Until now, these values had to be hardcoded on the application side.
2023-11-14 04:34:49 -08:00
raiden00pl
7d99f01cf7 drivers/foc: get hardware information via lower-half interface 2023-11-14 04:34:49 -08:00
Eren Terzioglu
d92a7011fd xtensa/esp32s3: Add RWDT support 2023-11-13 21:04:30 -03:00
Takumi Ando
c076cb1bef rp2040: pwm: Fix errors at CONFIG_PWM_NCHANNELS=1
Perhaps it has never been tested with CONFIG_PWM_NCHANNELS=1.

Signed-off-by: Takumi Ando <t-ando@advaly.co.jp>
2023-11-13 11:40:22 +01:00
Rodrigo Sim
66ccaed5ce stm32f4/stm32f401rc-rs485: add support to userleds 2023-11-12 16:58:31 -08:00
halyssonJr
e1274d1c42 fix backlight GPIO, add backlight control, and add LVGL defconfig 2023-11-11 20:04:51 -08:00
Jorge Guzman
82af87f896 stm32h7/linum-stm32h753bi: Added suport to userlerds library.
Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
2023-11-11 20:02:53 -08:00
chenwen@espressif.com
b6e09955dd xtensa/esp32s3: Support multiple PHY init data bin
1. If CONFIG_ESP32S3_PHY_INIT_DATA_IN_PARTITION and CONFIG_ESP32S3_SUPPORT_MULTIPLE_PHY_INIT_DATA are enabled,
PHY initialization data (PHY initialization data is used for RF calibration) will be loaded from a partition.

2. The corresponding PHY init data type can be automatically switched according to the country code,
China's PHY init data bin is used by default, country code can be modified through the wapi command: wapi country <ifname> <country code>.

Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
2023-11-10 15:55:14 -03:00
chenwen@espressif.com
cc10c54f6c xtensa/esp32s3: Support partition and OTA device
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
2023-11-10 15:55:14 -03:00
Tiago Medicci Serrano
18718316dc esp32/ble: enable the BLE interrupt during a SPI flash operation
This commit sets the BLE's interrupt as a IRAM-enabled interrupt,
which enables it to run during a SPI flash operation. This enables
us to create a cache to off-load semaphores and message queues
operations and treat them when the SPI flash operation is finished.
By doing that, we avoid packet losses during a SPI flash operation.
2023-11-10 09:11:35 +08:00
Tiago Medicci Serrano
b25793ebac esp32/spiflash: Make it similar to ESP32-S3 by removing cache state 2023-11-10 09:11:35 +08:00
Tiago Medicci Serrano
57b8fc9954 esp32/irq: Allow IRAM ISRs to run during SPI flash operation
This commit provides an interface to register ISRs that run from
IRAM and keeps track of the non-IRAM interrupts. It enables, for
instance, to avoid disabling all the interrupts during a SPI flash
operation: IRAM-enabled ISRs are, then, able to run during these
operations.

It also makes the code look more similar to the ESP32-S3 SPI flash
implementation by creating a common `esp32_spiflash_init` that is
responsible to create the SPI flash operation tasks. The function
intended to initialize the SPI flash partions was, then, renamed to
`board_spiflash_init`.
2023-11-10 09:11:35 +08:00
Eren Terzioglu
9997a858e2 xtensa/esp32s2: Add SPI slave support 2023-11-10 00:34:39 +08:00
Janne Rosberg
7f48c185c8 sama5d2-xult: add support for QSPI flash and nxffs
Add support for onboard qspi flash with nxffs fs
Signed-off-by: Janne Rosberg <janne.rosberg@offcode.fi>
2023-11-09 23:59:33 +08:00
Eren Terzioglu
77df430f30 xtensa/esp32s2: Add rtc heap support 2023-11-09 23:58:30 +08:00
Dong Heng
c655870b22 boards/esp32s3: Link stack checking function and data to SRAM when enable flash or PSRAM driver
During PSRAM initialization and flash operations, the Cache needs to be disabled.
So all data and code for the aforementioned scope is required to be placed in Internal RAM.
2023-11-09 13:27:31 +01:00
chenwen@espressif.com
5239d01dba xtensa/esp32s3: Disable psram as task stack
1. Disable psram as task stack to avoid system blocking.
2. Add some function comments.
2023-11-08 16:25:57 -03:00
chenwen@espressif.com
8d94c1b3cb xtensa/esp32s3: Support malloc from external RAM and internal RAM
Enables the allocation of the entire Userspace heap into SPI RAM and reserving the Internal RAM exclusively for the Kernel heap.
2023-11-08 16:25:57 -03:00
simbit18
8fa6a29503 Fix Kconfig style
Remove extra TABs
Remove spaces from Kconfig
Add comments
2023-11-08 22:58:26 +08:00
Tiago Medicci Serrano
59107e5573 esp32s3: Fix issue regarding IRAM-enabled ISRs by fixing the linker
After https://github.com/apache/nuttx/pull/11007/ was merged, the
path for some files changed, requiring the linker to be fixed to
make it run from the internal memory once again.
2023-11-06 18:41:34 -03:00
raiden00pl
ede4b6b0ab boards/b-g431b-esc1: rework board to not use CONFIG_STM32_USE_LEGACY_PINMAP=y 2023-11-03 22:25:46 +08:00
yinshengkai
d0a5489ac5 sched: explicitly select the cpuload clock source configuration
Different configurations require different dependencies.
Explicitly select dependencies to avoid automatically selecting inappropriate configurations.

Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2023-11-01 09:27:56 +08:00
SPRESENSE
2f1b4a49ce boards: cxd56xx: Register cxd5610 gnss driver
Register device file for cxd5610 gnss driver.
2023-10-31 09:18:18 +01:00
SPRESENSE
0ee2bb51b8 boards: cxd56xx: Add cxd5610 gnss lowerhalf driver
Add cxd5610 gnss lowerhalf driver with i2c interface.
2023-10-31 09:18:18 +01:00
SPRESENSE
f49fa466b6 boards: cxd56xx: Add cxd5610 gnss driver
Add cxd5610 gnss driver as board-specific sensor driver.
2023-10-31 09:18:18 +01:00
Jorge Guzman
66df15b965 boards/stm32: add support to LINUM-STM32H753BI board
The LINUM-STM32H753BI is a board with RS485, RS232, SD Card, CAN,
SD Card, USB, Ethernet, LCD, etc.

Signed-off-by" Jorge Guzman jorge.gzm@gmail.com

ci: correction in nsh defconfig file of LINUM-STM32H753BI
2023-10-30 13:56:40 -03:00
dongjiuzhu1
8ad88a3fc5 qemu/arm64: implement up_textheap_align and support sotest
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
2023-10-30 18:20:22 +08:00
raiden00pl
f9d088590a Documentation: migrate boards/{z16|z80}/xxx/configs/README.txt 2023-10-28 13:55:22 +08:00
SPRESENSE
f3fabc5d32 Revert "make/archive: Use the full path name when matching or storing names in the archive"
This reverts commit 563125fde3.
2023-10-27 22:26:18 +08:00
dongjiuzhu1
4068f11129 binfmt/elf: Select ARCH_USE_TEXT_HEAP if ARCH_HAVE_TEXT_HEAP
Using up_textheap_memalign to allocate memory if arch support textheap
for loading section.

The default system heap does not support execution permissions,
so up_textheap_memalign allocation is required.

this patch can fix issue about #11043

update esp32 elf config:
remove -CONFIG_ARCH_USE_TEXT_HEAP=y becuase ARCH_CHIP_ESP32 select
ARCH_HAVE_TEXT_HEAP

Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
2023-10-27 15:42:02 +09:00
Michal Lenc
51bae917b7 ci: add fmemopen test and merge fopencookie and fmemopen to stdio test
CI test for fmemopen() function was added. The test was merged with
fopencookie interface test and merged into single test_stdio.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2023-10-27 08:55:24 +08:00
raiden00pl
56529d2944 Documentation: migrate the rest boards
- migrated /README are removed from /boards

- there are a lot of READMEs that should be further converted to rst.
  At the moment they are moved to Documentation/platforms and included in rst files
2023-10-26 18:13:34 -03:00
raiden00pl
d77dff786b fix broken CI
rename missing CONFIG_SYSTEM_RAMTEST to CONFIG_TESTING_RAMTEST
2023-10-26 14:51:01 -03:00
xuxin19
e3003f691b cmake:init RISC-V cmake qemu-rv build
cmake currently does not support non-FlatBuild,
need disable ELF and LOADABLE when compiling other defconfigs

```
 cmake -B build -DBOARD_CONFIG=rv-virt/smp64 -GNinja # for rv32:rv-virt/smp
 cmake --build build -t menuconfig
 cmake --build build
 qemu-system-riscv64 -semihosting -M virt,aclint=on -cpu rv64 -smp 8 -bios none -kernel nuttx -nographic
```

Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
2023-10-26 21:01:46 +08:00
chenrun1
de17f43481 boards:Modify test "ramtest" path
Based on the PR#2161 change, we need to modify the macro switch in most boards to configure ramtest.

Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
2023-10-26 13:17:35 +02:00
simbit18
37729540c0 Fix Kconfig style
Remove spaces from Kconfig
Add comments
2023-10-26 01:53:58 +08:00
chao an
3cadf6642a kernel: replace all usleep to nxsig_usleep in kernel space
syscall cannot be called from kernel space

Signed-off-by: chao an <anchao@xiaomi.com>
2023-10-25 15:46:03 +08:00
Tiago Medicci Serrano
0616796185 esp32-devkitc/ble: Enable SMP for BLE defconfig
This defconfig also pins the HCI TX thread to the same core of the
BLE task.
2023-10-24 22:41:44 +08:00
Alan Carvalho de Assis
95800a7f54 boards: Rename shiftgame to brickmatch
This patch will rename the shiftgame to brickmatch and will add
support to initialize brickmatch automatically on esp32-devkitc.
2023-10-24 13:54:32 +08:00
Alan Carvalho de Assis
41a6adf93f esp32: Add support to gesture and APA102 as LCD 2023-10-24 13:54:32 +08:00
Rodrigo Sim
21ba49408c boards/stm32: add support to STM32F401RC-RS485 board
The STM32F401RC-RS485 is a board with RS485 support, SD Card, buttons,
leds, temperature sensor, adc and etc.

Signed-off-by: Rodrigo Sim rcsim10@gmail.com
2023-10-23 14:28:27 +08:00
halyssonJr
48a878fd06 Adding initial support to board esp32-2432S028, is a board with SD Card, RGB LED, output for speak and display LCD
Signed-off-by: halyssonJr <halysson1007@gmail.com>
2023-10-22 00:57:36 +08:00
GD32-MCU
6e94f7432f add gd32f470i board support 2023-10-21 11:45:03 -03:00
chao an
fa943c11b3 cmake: correct cmake rule file name
The rule of cmake file name should be CMakeLists.txt not CMakeList.txt

Signed-off-by: chao an <anchao@xiaomi.com>
2023-10-21 11:00:27 +08:00
Alan Carvalho de Assis
b95fd6a573 esp32: Add wifishare board config and documentation
Signed-off-by: Alan C. Assis <acassis@gmail.com>
2023-10-20 09:46:21 +08:00
Michal Lenc
f43701c7c9 ci: fix file system CI test
File system CI test was not testing the correct behavior of scanf and just
checked whether program did not end with hard fault. This adds
functionality check and required configuration options to run FS test.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2023-10-19 21:39:24 +08:00
Michal Lenc
7463052c8e ci: fix scanf CI test
Scanf CI test was not testing the correct behavior of scanf and just
checked whether program did not end with hard fault. This adds
functionality check and required configuration options to run scanf
test.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2023-10-19 21:39:24 +08:00
cuiziwei
c164fc9b21 nuttx:generate nuttx.map file when enable debug link map.
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
2023-10-19 19:19:22 +08:00
Xiang Xiao
04f834290c ucans32k146/se05x: Refresh defconfig after https://github.com/apache/nuttx-apps/pull/2131
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-10-19 12:37:42 +08:00
makejian
7d6c529e88 sim/crypto: Use mbedtls default configuration without special check
depends on patch https://github.com/apache/nuttx-apps/pull/2131
Signed-off-by: makejian <makejian@xiaomi.com>
2023-10-18 21:18:42 +08:00
Michal Lenc
6e4ffb9ea1 ci: add fopencookie test
This adds fopencookie test for simulator CI.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2023-10-18 21:13:01 +08:00
simbit18
b5d640acc5 fix Cygwin/MSYS2 ld: unrecognized option '-z'
The '-z' options don't supported for Windows versions of ld.
2023-10-18 01:23:39 +08:00
Dong Heng
1cb17b8a6a boards/esp32s3-box: Support hardware version 3
config/lvgl: For old ESP32-S3-BOX board
config/lvgl-3: For new ESP32-S3-BOX-3 board
2023-10-17 17:32:32 +08:00
Alan Carvalho de Assis
444b6d9635 boards: Update all boards that were using CONFIG_NET_LL_GUARDSIZE=50 2023-10-16 08:55:21 +08:00
Marco Casaroli
0f56d3428b feat(esp32s3-eye): lcd defconfig 2023-10-12 16:57:04 -04:00
Marco Casaroli
e5b4b58f96 feat(esp32s3-eye): i2c defconfig 2023-10-12 16:57:04 -04:00
Marco Casaroli
effab1bd61 feat(esp32s3-eye): SPI and LCD
LCD is connected to SPI2 and uses DC signalling.
2023-10-12 16:57:04 -04:00
Marco Casaroli
20b5d2b84c fix(esp32s3-eye): unexpose backlight GPIO
This IO is not exposed in any headers and it is only used for LCD.

So we don't expose it as gpio device.
2023-10-12 16:57:04 -04:00
Marco Casaroli
b7bc0e542c fix(esp32s3-eye): spiflash declaration 2023-10-12 16:57:04 -04:00
Marco Casaroli
09ee163d37 feat(esp32s3-eye): I2C 2023-10-12 16:57:04 -04:00
Marco Casaroli
e99966ec70 chore(esp32s3_board_i2c): suppress warning
If only I2C1 is configured but not I2C0, gcc is giving a warning,
so we suppress it.
2023-10-12 16:57:04 -04:00
hujun5
cef8c598c7 arm64: Add support for FIQ interrupts
To compile arm64 NuttX, use the following command:
 ./tools/configure.sh -l qemu-armv8a:nsh_fiq
To run,use the following command
 qemu-system-aarch64 -cpu cortex-a53 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx

Signed-off-by: hujun5 <hujun5@xiaomi.com>
2023-10-12 16:56:24 -04:00
Marco Casaroli
ef739161b7 feat(esp32s3-eye): gpio defconfig
Add a defconfig for exposing the gpio and buttons in the
esp32s3-eye board.
2023-10-12 01:39:28 +08:00
Marco Casaroli
8611003c98 feat(esp32s3-eye): buttons
This adds button support for the esp32-s3-eye board
2023-10-12 01:39:28 +08:00
Marco Casaroli
5fb2535354 feat(esp32s3-eye): gpio
This adds the gpio driver and configuration to the esp32-s3-eye
board.
2023-10-12 01:39:28 +08:00
Marco Casaroli
79e5d88f97 feat(esp32s3-eye): wireless
Enable wifi and ble on board_bringup as we do with the DevkitC
2023-10-11 18:30:07 +08:00