At present, the serial drivers qemu_serial.c and serial_pl011.c on the fvp-v8r and qemu platforms in arm64 are duplicated
and need to be merged. The plan is to place them under the drivers\serial directory to create a common code module,
so that both fvp-v8r and qemu can use the same code.
In the future, if new platforms use pl011 serial ports, they can also be directly reused
Signed-off-by: hujun5 <hujun5@xiaomi.com>
RESTORE_FACTORY used to reset the device
FACTORY_INQUIRY used to reset the device but need user confirmed.
Signed-off-by: minjian.tang <minjian.tang@aqara.com>
move the IPPROTO_IP/IPPROTO_IPV6 flag into the socket_conn_s structure to
make it more than just control udp.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
This bluetooth stack remains in an inconsistent state when
the bluetooth HCI module is removed. This change adds a
bt_netdev_unregister function that can be used to clean up
after a module is removed. Some global variables are also
set to their default values.
adapts to third-party code compilation. in the process of porting ConnMan,
we encounter some situations where the structure is not defined, or the
returned data types do not match the expectations. Refer to the common
implementation of other systems and add relevant definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
1. Get the value of sp from dump regs when an exception occurs,
to avoid getting the value of fp from up_getsp and causing
incomplete stack printing.
2. Determine which stack the value belongs to based on the value
of SP to avoid false reports of stack overflow
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
adapts to third-party code compilation. in the process of porting ConnMan,
we encounter some situations where the structure is not defined, or the
returned data types do not match the expectations. Refer to the common
implementation of other systems and add relevant definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
adapts to third-party code compilation. in the process of porting ConnMan,
we encounter some situations where the structure is not defined, or the
returned data types do not match the expectations. Refer to the common
implementation of other systems and add relevant definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
adapts to third-party code compilation. in the process of porting ConnMan,
we encounter some situations where the structure is not defined, or the
returned data types do not match the expectations. Refer to the common
implementation of other systems and add relevant definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
adapts to third-party code compilation. in the process of porting ConnMan,
we encounter some situations where the structure is not defined, or the
returned data types do not match the expectations. Refer to the common
implementation of other systems and add relevant definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
adapts to third-party code compilation. in the process of porting ConnMan,
we encounter some situations where the structure is not defined, or the
returned data types do not match the expectations. Refer to the common
implementation of other systems and add relevant definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
adapts to third-party code compilation. in the process of porting ConnMan,
we encounter some situations where the structure is not defined, or the
returned data types do not match the expectations. Refer to the common
implementation of other systems and add relevant definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
adapts to third-party code compilation. in the process of porting ConnMan,
we encounter some situations where the structure is not defined, or the
returned data types do not match the expectations. Refer to the common
implementation of other systems and add relevant definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
adapts to third-party code compilation. in the process of porting ConnMan,
we encounter some situations where the structure is not defined, or the
returned data types do not match the expectations. Refer to the common
implementation of other systems and add relevant definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
adapts to third-party code compilation. in the process of porting ConnMan,
we encounter some situations where the structure is not defined, or the
returned data types do not match the expectations. Refer to the common
implementation of other systems and add relevant definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
CURRENT_REGS may change during assert handling, so pass
in the 'regs' parameter at the entry point of _assert.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Since not all nand devices follow ONFI spec, nand_raw_initialize could be used to skip ONFI special action
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The setbuffer() function is a wrapper around setvbuf() which
enables full buffering on a buffer allocated by the caller, assuming
buffer is not a null pointer.
Current driver supports MTDIOC_BULKERASE ioctl that erases the entire
device. The added ioctl MTDIOC_ERASESECTORS adds possibility to erase
just sectors defined by the user.
This is similar to MEMERASE call in Linux kernel.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Add the `IW_AUTH_WPA_VERSION_WPA3` bit field to support selecting
WPA3-SAE networks using the `IW_AUTH_WPA_VERSION` command.
This commit is necessary to enable `wapi`'s support for WPA3.
The spawn proxy thread is a special existence in NuttX, usually some developers
spend a lot of time on stack overflow of spawn proxy thread:
https://github.com/apache/nuttx/issues/9046https://github.com/apache/nuttx/pull/9081
In order to avoid similar issues, this PR will remove spawn proxy thread to simplify
the process of task/posix_spawn().
1. Postpone the related processing of spawn file actions until after task_init()
2. Delete the temporary thread of spawn proxy and related global variables
Signed-off-by: chao an <anchao@xiaomi.com>
Add private data for spi_bitbang low-level driver to add an instance
specific private data.
And add spi_destroy_bitbang() to clean up a driver instance.
This commit adds Linux like adjtime() interface that is used to correct
the system time clock if it varies from real value. The adjustment is
done by slight adjustment of clock period and therefore the adjustment
is without time jumps (both forward and backwards)
The implementation is enabled by CONFIG_CLOCK_ADJTIME and separated from
CONFIG_CLOCK_TIMEKEEPING functions. Options CONFIG_CLOCK_ADJTIME_SLEWLIMIT
and CONFIG_CLOCK_ADJTIME_PERIOD can be used to control the adjustment
speed.
Interfaces up_get_timer_period() and up_adj_timer_period() has to be
defined by architecture level support.
This is not a POSIX interface but derives from 4.3BSD, System V.
It is also supported for Linux compatibility.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Store the old environment in a local context so another temporary address
environment can be selected. This can happen especially when a process
is being loaded (the new process's mappings are temporarily instantiated)
and and interrupt occurs.
The current implementation requires the use of enter_critical_section, so the source code needs to be moved to kernel space
Signed-off-by: hujun5 <hujun5@xiaomi.com>
WIP
WIP - ALS now OK with full IOCTL.
WIP
WIP
ALS now works as intended
WIP - getting to bottom of crash when ctrl-c the app
Seems to all work...
ioctl #define changes
Update ioctl.h
Maybe final changes
Maybe final changes - again
Delete .settings directory
Delete nuttx Default.launch
Maybe final changes - again
changes after initial feedback
changes after initial feedback
Add snerr error when incorrect device ID seen
Update apds9922.c
Revert "Merge branch 'apds9922' of https://github.com/TimJTi/nuttx into apds9922"
This reverts commit 8fdf5cbfb783d25251d13bc338ece6adca1308bc, reversing
changes made to 0d58237ba27f3cf87cf711658f5388d974be502e.
Improve probe error messages
APDS9922
WIP
WIP - ALS now OK with full IOCTL.
WIP
WIP
ALS now works as intended
WIP - getting to bottom of crash when ctrl-c the app
Seems to all work...
ioctl #define changes
Update ioctl.h
Maybe final changes
Maybe final changes - again
Delete .settings directory
Delete nuttx Default.launch
Maybe final changes - again
changes after initial feedback
changes after initial feedback
Add snerr error when incorrect device ID seen
Update apds9922.c
Revert "Merge branch 'apds9922' of https://github.com/TimJTi/nuttx into apds9922"
This reverts commit 8fdf5cbfb783d25251d13bc338ece6adca1308bc, reversing
changes made to 0d58237ba27f3cf87cf711658f5388d974be502e.
Improve probe error messages
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Delete .gitignore
Changes after PR review
Remove static arrays from header file
Update apds9922.c
improvements to enum usage
Restore .gitignore
Update Kconfig
Update .gitignore
Update .gitignore
