HPET can be used as system clock for x86_64
to set HPET as system clock you have to enable:
CONFIG_ONESHOT=y
CONFIG_ALARM_ARCH=y
CONFIG_INTEL64_ONESHOT=y
CONFIG_ARCH_INTEL64_HPET_ALARM=y
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
this partly revert 4123615621 which works OK for PCI serial and network cards
but breaks QEMU EDU due to usage of sem and usleep in IDLE thread context.
Another solution will be provided later.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
DEBUG_FULLOPT enables many x86 related optimizations which can
be broken in many ways (eg. not aligned stack).
With this change it's easier to catch changes that breaks x86_64.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Align _ebss to 16, otherwise g_idle_topstack is not correctly aligned.
For some reason the previous alignment worked with make buit but in case
of cmake with optimization enabled, the IDLE stack was misaligned which
caused vector instruction misalignment exception.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
This adds support for creating an early frame buffer and primatives for
writing to this frame buffer as a console. This does require the font
infrastructure as well as multiboot2.
Additionally this can now be used with a UEFI bootloader long as it
boots NuttX via Multiboot2. There does seem to be a PCI interrupt
issue when running in UEFI mode.
I was able to boot my laptop using this and see PCI devices enumerate.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
x86_64: Add conditionals around the multiboot framebuffer
Squashed commits:
1. Porting prior PCI work in place of jailhouse code
At this point the PCI enumeration works for x86_64 including over
pci-pci bridges.
Running QEMU with this configuration we see the bridge and the
device on the bridge. It also detected the qemu test device
qemu-system-x86_64 \
-cpu host,+pcid,+x2apic,+tsc-deadline,+xsave,+rdrand \
--enable-kvm -smp 1 -m 2G -cdrom boot.iso --nographic -no-reboot \
-device pci-testdev \
-device pci-bridge,id=bridge0,chassis_nr=2 \
-device e1000,bus=bridge0,addr=0x3
qemu_pci_init: Initializing PCI Bus
pci_probe_device: [00:00.0] Found 8086:1237, class/revision 06000002
pci_probe_device: [00:01.1] Found 8086:7010, class/revision 01018000
pci_probe_device: [00:01.2] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.3] Found 8086:7113, class/revision 06800003
pci_probe_device: [00:01.4] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.5] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.6] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.7] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:02.0] Found 1234:1111, class/revision 03000002
pci_probe_device: [00:03.0] Found 8086:100e, class/revision 02000003
pci_probe_device: [00:04.0] Found 1b36:0005, class/revision 00ff0000
pci_probe_device: [00:04.0] Probing
pci_check_pci_bridge: [00:05.0] Found Bridge
pci_probe_device: [01:03.0] Found 8086:100e, class/revision 02000003
pci_probe_device: [00:05.0] Found 1b36:0001, class/revision 06040000
2. Remove unused CONFIG_PCI_MAX_BDF option
3. Add a workaround for Jailhouse pci scanning
4. Extend BAR parsing and handle PIO and MMIO for pci-testdev
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
5. PCI: Add initial support for QEMU 'edu' test device
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
6. Bring up PCI later in boot process
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
7. Add ISR and DMA support to QEMU edu test pci device
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
8. Fix bad function prototype definition in qemu_edu
9. intel64: Add a pci test configuration and instructions
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
10. PCI: Fix issue in identification of 64bit bar
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Squashed commits:
1. x86_64: qemu: implement pci-e functions and enumerate pci-e devices on boot
2. virt: add qemu pci-testdev driver
3. pcie: types array should be null terminated
4. pcie: enable don't take flags, hardcoded enabling flags
5. pcie: checking bar > 4 for 64bit bars are sufficient
6. pcie: qemu: remove not used header
7. pcie: qemu: return -EINVAL if buffer argument is NULL
8. pcie: make pcie enumerate routine as common instead of architecture dependent
9. pcie: cosmetic changes to fit check tools
10. pcie: create MSI/MSIX related marcos and simplify the msi/msix routines
- migrated /README are removed from /boards
- there are a lot of READMEs that should be further converted to rst.
At the moment they are moved to Documentation/platforms and included in rst files
## Summary
A lot of linker scripts were listed twice, once for unix, once for windows.
This PR cleans up the logic so they're only listed once.
## Impact
Any opportunity to use a single source of truth and reduce lines of code is a win!
## Testing
CI will test all build
since the related code was removed by:
commit 4d5a964f29
Author: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
Date: Tue Feb 23 18:04:13 2021 +0800
net: unify socket into file descriptor
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
