SOCK_CTRL is added to provide special control over network drivers
and daemons. Currently, SOCK_DGRAM and SOCK_STREAM perform this control,
but these use socket resources. In the case of usersocket in particular,
this is a waste of the device's limited socket resources.
The priorities for finding a network adapter are as follows:
1. if laddr is not ANY, use laddr to find device;
2. if laddr is ANY, and bound index is not 0, use bound index
to find device;
3. if laddr is ANY and no device is bound, use raddr to find
device.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
SOCK_CTRL is added to provide special control over network drivers
and daemons. Currently, SOCK_DGRAM and SOCK_STREAM perform this control,
but these use socket resources. In the case of usersocket in particular,
this is a waste of the device's limited socket resources.
1.
net/slip.c:865:29: warning: unused variable ‘priv’ [-Wunused-variable]
865 | FAR struct slip_driver_s *priv =
| ^~~~
net/slip.c: In function ‘slip_rmmac’:
net/slip.c:895:29: warning: unused variable ‘priv’ [-Wunused-variable]
895 | FAR struct slip_driver_s *priv =
| ^~~~
2.
local/local_sendmsg.c: In function ‘local_sendmsg’:
local/local_sendmsg.c:423:18: warning: ‘count’ may be used uninitialized in this function [-Wmaybe-uninitialized]
423 | return count;
| ^~~~~
local/local_sendmsg.c:131:11: warning: ‘i’ may be used uninitialized in this function [-Wmaybe-uninitialized]
131 | while (i-- > 0)
| ~^~
local/local_sendmsg.c:71:7: note: ‘i’ was declared here
71 | int i;
| ^
Signed-off-by: chao an <anchao@xiaomi.com>
1.
ipfrag/ipv4_frag.c: In function ‘ipv4_fragin’:
ipfrag/ipv4_frag.c:184:22: warning: ‘head’ may be used uninitialized in this function [-Wmaybe-uninitialized]
184 | ipv4->len[1] = head->io_pktlen & 0xff;
| ~~~~^~~~~~~~~~~
ipfrag/ipv4_frag.c:123:21: note: ‘head’ was declared here
123 | FAR struct iob_s *head;
| ^~~~
2.
devif/ipv6_input.c: In function ‘ipv6_in’:
devif/ipv6_input.c:60:33: error: ‘TCPIPv6BUF’ undeclared (first use in this function); did you mean ‘UDPIPv6BUF’?
60 | #define PAYLOAD ((FAR uint8_t *)TCPIPv6BUF)
| ^~~~~~~~~~
3.
nat/ipv4_nat.c: In function ‘ipv4_nat_inbound_icmp’:
nat/ipv4_nat.c:67:30: error: ‘TCP_HDRLEN’ undeclared (first use in this function); did you mean ‘UDP_HDRLEN’?
67 | ((proto) == IP_PROTO_TCP ? TCP_HDRLEN : \
| ^~~~~~~~~~
nat/ipv4_nat.c:323:47: note: in expansion of macro ‘L4_HDRLEN’
323 | inner_l4hdrlen = MIN(inner_l4len, L4_HDRLEN(inner->proto));
| ^~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
Receiving an ACK indicating TCP Window Update will not set ACKDATA flag (because tx_unacked is 0) in our TCP stack. Then this ACK won't let us send anything after receiving it, even if it updates snd_wnd. So we need to check whether we can send data immediately when our snd_wnd is updated (especially from 0), otherwise we will only send next data after timer expiry.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
NuttX kernel should not use the syscall functions, especially after
enabling CONFIG_SCHED_INSTRUMENTATION_SYSCALL, all system functions
will be traced to backend, which will impact system performance.
Signed-off-by: chao an <anchao@xiaomi.com>
Regression by:
| commit 7fce145b30
| Author: chao an <anchao@xiaomi.com>
| Date: Mon Jan 30 21:36:39 2023 +0800
|
| net/devif: check the net device before use
|
| Signed-off-by: chao an <anchao@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
Issue:
TCP rx buffer is freed after 4-way handshake with current design.
3 socket's rx buffer might be consumed during ffmpeg switch music procedure,
and this might cause IOB exhausted.
Solution:
free TCP rx buffer immediately in tcp_close to make sure IOB won't be
exhausted.
Signed-off-by: 梁超众 <liangchaozhong@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
This reverts commit fbe641a916.
This issue already fixed by below change:
| commit 715785245c
| Author: chao an <anchao@xiaomi.com>
| Date: Mon Jan 16 12:37:44 2023 +0800
|
| net/tcp: fix potential busy loop in tcp_send_buffered.c
|
| if the wrbuffer does not have enough space to send the rest of
| the data, then the send function will loop infinitely in nonblock
| mode, add send timeout check to avoid this issue.
|
| Signed-off-by: chao an <anchao@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
tcp_input:
If we didn't find an active connection that expected the packet,
If the SYN flag isn't set,
It is an old packet and we send a RST.
conn is NULL when this case
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
The following build error happens when CONFIG_NET_IPv6 is enabled and CONFIG_NET_UDP is not enabled.
inet/ipv6_setsockopt.c:132:19: error: invalid use of undefined type 'struct udp_conn_s'
132 | conn->flags |= _UDP_FLAG_PKTINFO;
| ^~
inet/ipv6_setsockopt.c:132:30: error: '_UDP_FLAG_PKTINFO' undeclared (first use in this function)
132 | conn->flags |= _UDP_FLAG_PKTINFO;
| ^~~~~~~~~~~~~~~~~
inet/ipv6_setsockopt.c:132:30: note: each undeclared identifier is reported only once for each function it appears in
inet/ipv6_setsockopt.c:136:19: error: invalid use of undefined type 'struct udp_conn_s'
136 | conn->flags &= ~_UDP_FLAG_PKTINFO;
Signed-off-by: 梁超众 <liangchaozhong@xiaomi.com>
When using PIPE connect to a file, ENOTSOCK or ECONNREFUSED should be returned
and when using PIPE connect to invalid pipe name, ENOENT should be returned in libuv
Signed-off-by: yintao <yintao@xiaomi.com>
psock_tcp_send will enter busyloop state when no IOB keeps at unavailable state
when the socket is blocking socket and this will cause WDT.
According to socket's manpage, -1 should be returned while errno set to EAGAIN
if send/recv timeout was set.
Here's the description:
SO_RCVTIMEO and SO_SNDTIMEO
Specify the receiving or sending timeouts until reporting an error. The argument is a struct timeval. If an input or output function blocks for this period of time, and data has been sent or received, the return value of that function will be the amount of data transferred; if no data has been transferred and the timeout has been reached then -1 is returned with errno set to EAGAIN or EWOULDBLOCK, or EINPROGRESS (for connect(2)) just as if the socket was specified to be nonblocking. If the timeout is set to zero (the default) then the operation will never timeout. Timeouts only have effect for system calls that perform socket I/O (e.g., read(2), recvmsg(2), send(2), sendmsg(2)); timeouts have no effect for select(2), poll(2), epoll_wait(2), and so on.
Signed-off-by: liangchaozhong <liangchaozhong@xiaomi.com>
UDP linger timeout will be wrongly converted to UINT_MAX by _SO_TIMEOUT() when it is set to 0,
net/socket/socket.h:
|
| # define _SO_TIMEOUT(t) ((t) ? (t) * MSEC_PER_DSEC : UINT_MAX)
net/udp/udp_close.c:
|
| if (_SO_GETOPT(conn->sconn.s_options, SO_LINGER))
| {
| timeout = _SO_TIMEOUT(conn->sconn.s_linger);
| }
this change will correct this behavior, if the linger is set to 0, the timeout value should be 0
Signed-off-by: chao an <anchao@xiaomi.com>
1. Remove tcp_txdrain() from close() to avoid indefinitely block
2. Send TCP_RST immediately if linger timeout
Signed-off-by: chao an <anchao@xiaomi.com>
Merge conflicts lead to code being placed in thre wrong place
The debug code should placed in tcp_send() not tcp_synack()
Signed-off-by: chao an <anchao@xiaomi.com>
if the wrbuffer does not have enough space to send the rest of
the data, then the send function will loop infinitely in nonblock
mode, add send timeout check to avoid this issue.
Signed-off-by: chao an <anchao@xiaomi.com>
Allocate the device buffer only if the protocol really need to send data.
not all protocols require the driver to prepare additional iob before
sending, especially UDP, each iob reserves l2/l3 header in advance
after prepare write buffer, net device could reuse this entry to send directly
Signed-off-by: chao an <anchao@xiaomi.com>
When trying to use iperf2, we found it comsumes all the IOB when sending UDP packets, then devif_poll has no IOB to send the packet out, so speed drops to 0 and never recovers.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
epoll_wait collects revent by checking fds->revent,
but local_socket will copy fds to the other two private pollfd shandow struct,
then the pipe_poll will not be able to update fds->revent directly,
so need local_socket save fds and implement a private poll_notify function
to passing revent to original fds->revent.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Previously, the devif_poll works in this flow:
devif_poll_xx -> bstop = callback -> continue if !bstop -> poll another
Now we split the polling and callback, so it should work like:
devif_poll_connections -> return true if callback need to be called
-> bstop = callback -> loop if !bstop -> poll again
Conditions:
poll_connections == 0, d_len == 0, break, return 0
poll_connections == 1, d_len == 0, break, return 1 (other stop case,
don't callback)
poll_connections == 1, d_len > 0, callback == 1, break, return 1
poll_connections == 1, d_len > 0, callback == 0, loop
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When ipv4_input/ipv6_input called by devif_loopback writes wrong data into buffer (another bug we're fixing), the else block does nothing but only record the 'dropped' statistic, then infinite loop happens.
Refers to previous lo device with dropping logic:
https://github.com/apache/nuttx/blob/releases/11.0/drivers/net/loopback.c#L178-L180
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Fragmentation of network data will intensify iob consumption, if
the device receives a message storm of fragmented packets, the iob
cache will not be effectively used, this is not allowed on iot devices
since the resources of such devices are limited. Of course, this
also takes some disadvantages: data needs to be copied.
This option will brings some balance on resource-constrained devices,
enable this config to reduce the consumption of iob, the received iob
buffers will be merged into the contiguous iob chain.
Signed-off-by: chao an <anchao@xiaomi.com>
If ipforward consumes all the IOB, devif_poll will not poll any more. Without polling, ipforward will not release any IOB, then all the network stack may fail with no IOB available.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Problem:
- `iob_copyout` to `d_buf` doesn't set `io_len` of the IOB, so `devif_poll` failed to copy the data into `buf` by `iob_copyout`
Modification:
- Just Move the IOB in `devif_forward`.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Loopback device will consume the d_iob packet in upper layer protocol,
in order to avoid null pointer access, reprepare iob buffer before polling connections
Signed-off-by: chao an <anchao@xiaomi.com>
l3/l4 stack will decouple the reference of d_buf gradually, Only legacy
devices still retain d_buf support, new net devices will use d_iob
Signed-off-by: chao an <anchao@xiaomi.com>
Fix icmpv6_reply logic broken by commit 48311cc61f and 391b501639.
- 48311cc61f "Fix unaligned memory access when creating ICMP Port Unreachable messages"
- It removed `htonl` function outside `data`, then the byte order may be wrong, so add `htons` back.
- 391b501639 "net: extract l3 header build code into new functions"
- It mis-removed the `memmove`, and the icmpv6 has no payload copied after this commit.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Set IPv4 flag before processing ipforward, otherwise the ICMP packet responded by ipforward may sometimes be regarded as IPv6.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Split out ipv4_nat_in/outbound_internal which returns entry instead of error code, for later ICMP error types, does not change any current logic.
Reason: Outer packet doesn't have information of port, so we need to find entry by inner packet, and apply the entry to outer packet.
| Outer Packet: SRC = Peer IP<No Port>, DST = External IP<No Port> |
| Inner Packet: SRC = External IP:Port, DST = Peer IP:Port |
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
This commit is for later ICMP error types processing, and does not change any current logic.
Reason for supporting both side of modification is that an inbound ICMP Error MSG may carry original packet like this:
| IP HDR: SRC = Peer IP, DST = External IP |
| ICMP HDR: ERROR MSG |
| <Origin> IP HDR: SRC = External IP, DST = Peer IP |
| <Origin> L4 HDR: SRC = External Port, DST = Peer Port |
So we need to support inbound translation (External -> Local) on SRC or DST of each header.
And so do the outbound direction.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
devif_loopback needs to be applied on l2 data, and was broken by commit below, now fix it.
| commit 8850dee746
| Author: chao an <anchao@xiaomi.com>
| Date: Sun Nov 27 03:31:07 2022 +0800
|
| net/devif: move preprocess of txpoll into common code
|
| Signed-off-by: chao an <anchao@xiaomi.com>
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
devif/ipv4_input.c: In function ‘ipv4_in’:
devif/ipv4_input.c:305:15: warning: declaration of ‘ret’ shadows a previous local [-Wshadow]
305 | int ret = ipv4_forward(dev, ipv4);
| ^~~
devif/ipv4_input.c:151:7: note: shadowed declaration is here
151 | int ret = OK;
| ^~~
Signed-off-by: chao an <anchao@xiaomi.com>
The following APIs need to be overriden by the arch after enabling
CONFIG_NET_ARCH_CHKSUM, move these functions to the common header
file to avoid prototype conflicts
uint16_t chksum(uint16_t sum, FAR const uint8_t *data, uint16_t len);
uint16_t net_chksum(FAR uint16_t *data, uint16_t len);
uint16_t ipv4_upperlayer_chksum(FAR struct net_driver_s *dev, uint8_t proto);
uint16_t ipv6_upperlayer_chksum(FAR struct net_driver_s *dev,
uint8_t proto, unsigned int iplen);
uint16_t ipv4_chksum(FAR struct ipv4_hdr_s *ipv4);
Signed-off-by: chao an <anchao@xiaomi.com>
TX poll callback in device lo(loopback) can be replaced by devif_loopback()
from devif_poll() hook, remove duplicate code to reuse this logic
Signed-off-by: chao an <anchao@xiaomi.com>
Add link layer length in loopback is unnecessary after below change checkin:
| commit 6fa60627eb
| Author: chao an <anchao@xiaomi.com>
| Date: Sun Nov 27 02:13:21 2022 +0800
|
| net/devif/ip: build l2 header on the IP layer
|
| Signed-off-by: chao an <anchao@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
fix build break if enable CONFIG_NET_IPv6 only
In file included from tcp/tcp_sendfile.c:38:
tcp/tcp_sendfile.c: In function ‘sendfile_eventhandler’:
tcp/tcp_sendfile.c:173:27: error: ‘struct tcp_conn_s’ has no member named ‘domain’
173 | DEBUGASSERT(conn->domain == PF_INET6);
| ^~
Signed-off-by: chao an <anchao@xiaomi.com>
inet/ipv4_setsockopt.c: In function ‘ipv4_setsockopt’:
inet/ipv4_setsockopt.c:200:19: error: invalid use of undefined type ‘struct udp_conn_s’
200 | conn->ttl = ttl;
| ^~
inet/ipv4_setsockopt.c:223:19: error: invalid use of undefined type ‘struct udp_conn_s’
223 | conn->flags |= _UDP_FLAG_PKTINFO;
| ^~
inet/ipv4_setsockopt.c:223:30: error: ‘_UDP_FLAG_PKTINFO’ undeclared (first use in this function)
223 | conn->flags |= _UDP_FLAG_PKTINFO;
| ^~~~~~~~~~~~~~~~~
inet/ipv4_setsockopt.c:223:30: note: each undeclared identifier is reported only once for each function it appears in
inet/ipv4_setsockopt.c:227:19: error: invalid use of undefined type ‘struct udp_conn_s’
227 | conn->flags &= ~_UDP_FLAG_PKTINFO;
Signed-off-by: ligd <liguiding1@xiaomi.com>
ARP support is only built if the Ethernet link layer is supported.
Continue and send the ARP request only if this device uses the
Ethernet link layer protocol.
Signed-off-by: chao an <anchao@xiaomi.com>
The `datalen` indicates the whole len of original packet, which will become the payload inside icmpv6 packet.
Using `datalen = (ipv4->len[0] << 8) + ipv4->len[1]` in icmp_reply is correct, because it includes IPv4 header, but when coming to IPv6, the `len` does not include the header, so we need to add it back.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Issue:
recv return 0 means peer side has already closed the connection according to
man page's description.
0 is returned without set errno when TCP rx timeout happens with current
design.
Solution:
return result instead of ir_result when ir_result is 0, then -1 will be
returned with errno set to EAGAIN for tcp rx buffer empty case.
Signed-off-by: liangchaozhong <liangchaozhong@xiaomi.com>
when usrsock client try to connect usrsock server local_loop
socket with an invalid port, server cannot find a listener conn
to handle this connet request, then it will response a TCP_RESET
packet via nuttx existing processing, when before conn recv this
RESET packet, it will trigger usrsock_rpmsg_server poll return
and send REMOTE_CLOSE event to usrsock client.
so usrsock connect_event fucntion need handle this event.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Support ICMP ECHO REQUEST & REPLY. Id of ICMP is processed like port of TCP in NAT. However, our ICMP stack doesn't have a method to manage id allocation like tcp_selectport(), the id is set by apps (like icmp_ping.c) without conflict avoidance, so not adding such conflict avoidance logic to ICMP stack when implementing NAT.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Add basic functions for NAT (NAPT), remaining some logic unimplemented (UDP, ICMP, port assignment, etc). NAT for TCP can work now (unless port conflicts).
Outbound: LAN -> Forward -> NAT(only if targeting at WAN) -> WAN
Inbound: WAN -> NAT(only from WAN, change dest) -> Forward -> LAN
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
In the past, header file paths were generated by the incdir command
Now they are generated by concatenating environment variables
In this way, when executing makefile, no shell command will be executed,
it will improve the speed of executing makfile
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
net_chksum_adjust is used for fast checksum adjustment after modifying some fields in a network packet. Will be used in NAT.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
devif/ipv6_input.c: In function 'ipv6_input':
devif/ipv6_input.c:59:33: error: 'TCPIPv6BUF' undeclared (first use in this function); did you mean 'IPv6BUF'?
59 | #define PAYLOAD ((FAR uint8_t *)TCPIPv6BUF)
| ^~~~~~~~~~
devif/ipv6_input.c:302:14: note: in expansion of macro 'PAYLOAD'
302 | payload = PAYLOAD; /* Assume payload starts right after IPv6 header */
|
Signed-off-by: chao an <anchao@xiaomi.com>
Error: route/net_del_ramroute.c:94:9: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat]
HTONL(match->target), HTONL(match->netmask));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/include/debug.h:232:23: note: expanded from macro 'ninfo'
^
/github/workspace/sources/nuttx/include/debug.h:102:43: note: expanded from macro '_none'
do { if (0) syslog(LOG_ERR, format, ##__VA_ARGS__); } while (0)
~~~~~~ ^~~~~~~~~~~
/github/workspace/sources/nuttx/include/netinet/in.h:233:17: note: expanded from macro 'HTONL'
^
/github/workspace/sources/nuttx/include/endian.h:63:25: note: expanded from macro '__swap_uint32'
^
Error: route/net_del_ramroute.c:94:31: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat]
HTONL(match->target), HTONL(match->netmask));
~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/include/debug.h:232:23: note: expanded from macro 'ninfo'
^
/github/workspace/sources/nuttx/include/debug.h:102:43: note: expanded from macro '_none'
do { if (0) syslog(LOG_ERR, format, ##__VA_ARGS__); } while (0)
~~~~~~ ^~~~~~~~~~~
/github/workspace/sources/nuttx/include/netinet/in.h:233:17: note: expanded from macro 'HTONL'
^
/github/workspace/sources/nuttx/include/endian.h:63:25: note: expanded from macro '__swap_uint32'
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
