Gregory Nutt
df51b69895
Spirit: Commit some trivial changes in preparation for a more substantial change.
2017-08-04 12:19:59 -06:00
Gregory Nutt
733d96cf81
Spirit: Correct setting of the length width field; Add multicast and broadcast addresses to radio properities.
2017-08-04 12:19:59 -06:00
Gregory Nutt
f6ebcc2220
Spirit network driver: Need to enable sending of TX address. Moved some non-optional settings out of board.h to driver.
2017-08-04 12:19:58 -06:00
Gregory Nutt
e8738e1f55
Minor update to some comments.
2017-08-04 09:00:58 -06:00
Gregory Nutt
bbc06dcd8e
RAMTRON: Should be able to select chunked write mode via a configuration option, not by editing the file.
2017-08-04 08:49:07 -06:00
Boris Astardzhiev
79ee0a5209
RAMTRON: Add support for splitting block writes in chunks. Some Re-RAMs like MB85AS4MT has a write buffer size limitation.
2017-08-04 08:12:59 -06:00
Jussi Kivilinna
9fc5f44ef6
syslog: CONFIG_CLOCK_MONOTONIC
2017-08-04 08:02:52 -06:00
Juha Niskanen
0113b0db95
drivers: handle I2C_TRANSFER return value consistently. Some I2C peripherals transfers return zero on success, others number of completed transfers. Make drivers robust against this.
2017-08-04 07:31:36 -06:00
Gregory Nutt
36e7a18181
spirit: Modify reg needs to toggle CS to get the correct status. Remove some delbug left in last commit. make sprit_unlock an inline function.
2017-08-03 15:15:15 -06:00
Gregory Nutt
d2b5078e01
Spirit: Mostly cosmetic fixes to names and comments. Tx timeout should run on the HP work queue.
2017-08-03 11:47:38 -06:00
Gregory Nutt
76c9ef4844
Spirit: Fix a few RX-related issues.
2017-08-03 11:08:33 -06:00
Gregory Nutt
b3e788e11b
Spirit: Fix typos in conditional compilation. Add debug output. Remove extra clear of pending interrupts, could cause missing interrupts. Add spirit_reg_modify() which is not currently used.
2017-08-03 09:55:30 -06:00
Gregory Nutt
8a785c4b66
Spirit Network Device: Fix a deadlock. Also several other design improvements to eliminate corner cases.
2017-08-03 08:37:05 -06:00
Gregory Nutt
1ae9748170
Networking: Add support for some packet radio IOCTL commands; Spirit: Fix a few bugs from testing.
2017-08-02 11:53:03 -06:00
Gregory Nutt
a6fa3b311d
b-l475e-iot91a: Add apps/examples/nettest and eamples/udp to Spirit1 configuration. Add telnet support. fix driver statistics configuration.
2017-08-02 07:01:42 -06:00
Gregory Nutt
1275c3e249
Spirit: Network driver needs to setup IP address based on configured node address. If no node address is provided, then it will use a default. Also upate a README.
2017-08-01 16:33:34 -06:00
Gregory Nutt
735095d040
Spiri: Fixe some typos. One is critical since it is conditional compilation.
2017-08-01 15:18:40 -06:00
Gregory Nutt
09bb6ff16b
Spirit: Add more debug output. Make sure device is in READY state after reset and before changing to STANDBY.
2017-08-01 13:48:59 -06:00
Gregory Nutt
ceca6c69a8
Spirit: Add a function to wait for a state change with a timeout.
2017-08-01 10:31:12 -06:00
Gregory Nutt
bd027b9019
serial.c: Use common TX drain logic when closing a driver as with the TCDRAIN IOCTL.
2017-08-01 10:14:24 -06:00
Gregory Nutt
2cb5ec542b
Spirit: Fix a bad debug assertion.
2017-08-01 09:01:46 -06:00
Gregory Nutt
4f0238339e
serial.c: Finish implementation of TCDRAIN. Based partly on logic from Sebastien Lorquet.
2017-08-01 07:39:08 -06:00
Sebastien Lorquet
e22912db37
drivers/serial/serial.c: Add support for TCFLUSH
2017-08-01 06:30:52 -06:00
Gregory Nutt
959f2042a4
IoT Board/Spirit: Fix a few issues that interfered with testing. Move console to the VCOM port (USART) for all configurations. Rename the spirit-mac configuration to spirit-6lowpan. Add lots of debug output the spirit network driver.
2017-07-31 18:26:17 -06:00
Gregory Nutt
1e24404dcc
Squashed commit of the following:
...
commit f97da3a546f9d6e1b858cfc45538a06b62396034
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 19:09:46 2017 -0600
Network: Condition out some types that depend on definitions that are only available with 6LoWPAN is enabled.
commit 312e9dc1195527100e12bf6be8b629f5b29be1f6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 18:57:23 2017 -0600
6LoWPAN: Fix case where source and destination IP address were backward. Fix some compile issues when star topology support is enabled.
commit 3b0e71c5807194fbb006d0560bb2c98133055ba3
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 16:01:48 2017 -0600
6LoWPAN PktRadio: Finishes up all logic; Lots of misc changes from build testing.
commit cc118f8cb335e1c48354fd7112e20be57de50b68
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 12:41:18 2017 -0600
6LoWPAN: Remove explicate type struct ieee802154_frame_meta_s from derive interface methods. Replace with a opaque void * type so that other radio meta data structures may use the interfaces. Add a new radion interface to get properties of the radio. Spirit: Finish packet I/O interface with the network.
commit 1aa0a63e8341ca5f9f88c294f96d1740459146d4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 07:57:15 2017 -0600
6LoWPAN: Replace metadata input parameter type from struct ieee802154_data_ind_s to void*. This permits radios with different MAC metadata to interact with 6LoWPAN. Includes many changes to handle variable length radio addresses. No longer just short and exteneded; any length.
commit 46266ace61ae6246123873935436d864c7de31e0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 17:50:42 2017 -0600
Spirit: Fix typos in SPI debug code.
commit 27c6b235f6a2d3b2f08da4920b224a40e9991f59
Merge: 7029dffd02 7f53e089175889ce65f538f79543dc47791442a0b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-30 19:11:23 -06:00
Gregory Nutt
7f53e08917
Squashed commit of the following:
...
commit 7029dffd02156bcbfa84262671c2ca766a117191
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 12:02:13 2017 -0600
6LoWPAN PktRadio: Add missing MetaData-related prototypes and initialization logic. Perform a major renaming to make room in the 6LoWPAN name space for packet radios.
commit e2012f7c1df14155c0bfd45d7f1cb3f71b259f48
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 10:16:23 2017 -0600
6LoWPAN PktRadio: Some initial changes to support raw packet radios without IEEE 802.15.4 with 6LoWPAN.
commit c6dbf9178539b7da75e492ffd1d1f93c9c326299
Merge: da782d6cdf 5889ce65f538f79543dc47791442a0b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-29 13:42:26 -06:00
Gregory Nutt
5889ce65f5
Squashed commit of the following:
...
commit da782d6cdff5980d71aaa2da5f9c28ab3438d085
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 07:26:48 2017 -0600
Spirit: Completes port of the spirit radio library to NuttX.
commit 63f3595c47dca13952d28b518c7f0a8d6ae9037a
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 17:42:51 2017 -0600
Spirit: Bring in a couple ore more radio interface functions.
commit 692a27da396b7683749790923d8fa085091764f1
Merge: 27c0a6ec08 38f79543dc47791442a0b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-29 07:29:07 -06:00
Gregory Nutt
38f79543dc
Squashed commit of the following:
...
commit 27c0a6ec0813187f125922c81189a70cf04d83d4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 15:47:27 2017 -0600
Spirit: Bring in a couple ore more radio interface functions.
commit 96657af2831487724723a60084831619257fd953
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 14:20:14 2017 -0600
Spirit: Bring in more radio interface functions.
commit 640d55399b54a019be68825668fca1446abd082f
Merge: 3fcf84a9a2 47791442a0b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-28 15:48:47 -06:00
Gregory Nutt
47791442a0
Squashed commit of the following:
...
commit 3fcf84a9a2673e1e1466ce5b114d7b73c257e515
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 12:00:31 2017 -0600
Spirit: Brings in the last of the PktCommon interfaces.
commit d26ebd901ba4ba84910e99b4e728b98c30fa4c0b
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:54:52 2017 -0600
Spirit: Add a few more PktCommon interfaces.
commit b5cb8041d50233a4abb8fb4d1dcef5428ae2c2b2
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:33:31 2017 -0600
libc/termios: Remember block comments before empty file sections.
commit 0fcab2c1c8c74442d40bd5e8c6af50a34f8a5821
Author: Sebastien Lorquet <sebastien@lorquet.fr>
Date: Fri Jul 28 09:31:00 2017 -0600
tcdrain implementation based on a new term ioctl
commit 797d4adf7d41068c671f0217d369b797b269de1a
Author: Stefan Kolb <Stefan.Kolb@avat.de>
Date: Fri Jul 28 09:19:04 2017 -0600
We discovered a problem with the samv7 mcan driver which results, under some circumstances, in a very high CPU load.
The problem occurs, and is easily reproducible, if the device is connected to a CAN network with a wrongly configured CAN speed (baud rate). In our tests we set the CAN speed of the device to 1000000 and the speed of the other CAN nodes to 500000. The device is restarted and sends a CANopen “bootup message” to the CAN network. This results in huge amount of errors messages on the CAN bus, probably because of the CAN feature for acknowledging error messages. The error messages can’t be read by the device because of the misconfigured CAN speed, instead the CAN chip reports lots of errors, which are reported to the application which uses the CAN driver (CONFIG_CAN_ERRORS is enabled).
The CAN errors are reported from the CAN chip via interrupts and thus the interrupt load is very high in this scenario. To fix the problem the driver now disables each RX error interrupt after it is occurred. The RX error interrupts are turned back on if at least one CAN message is received successfully.
commit e298f48e96d9e34017dcab8e4d87032862ae9322
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:06:26 2017 -0600
Spirit: Bring in PktStack interfaces.
commit 4a0f00a7058312dcf6ac392689b9f69112f613ec
Merge: 855cf97130 b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-28 12:01:05 -06:00
Gregory Nutt
ee4b69f0d3
Review of last PR. Fixes many coding standard problems.
2017-07-28 07:16:35 -06:00
Giorgio Groß
cf5440d60c
Merged in ordsen/nuttx/feature-ltc4151-driver (pull request #445 )
...
Add driver for LTC4151 current and voltage monitor
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-07-28 12:56:02 +00:00
Jeff
b6d5e7b9e1
Lightness correction for RGB LED driver
2017-07-28 06:54:38 -06:00
Jeff
7f8f833714
Lightness correction for RGB LED driver
2017-07-28 06:54:06 -06:00
Giorgio Groß
b55ec110f2
Add driver for LTC4151 current and voltage monitor
2017-07-28 13:05:56 +02:00
Gregory Nutt
b458934ac4
Squashed commit of the following:
...
commit 855cf9713052a851a1daeb3842db2edd6ff6f658
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 18:03:56 2017 -0600
Spirit Network Driver: Add some hooks that will eventually support address filtering.
commit 3b3fb24ea86cf8233b034871d5c550f47ab852e6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 17:13:21 2017 -0600
Spirit: Add a PktStack header file.
commit 705e8fff6a21264ab751fb34c107cb109430ac89
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 15:00:03 2017 -0600
Spirit: Bring in last of timer interfaces.
commit f8984b2f82e165f5bba132d6b099222d1beb1fbd
Merge: cb79778a30 f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-27 18:04:35 -06:00
Gregory Nutt
f287cc25d6
Squashed commit of the following:
...
commit cb79778a3044ae97a1cc615dfa24099144f04bd0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 11:46:31 2017 -0600
Spirit: Bring in last of QI interfaces.
commit 0245b330a33aa73531b82ae261b1312be9922e0f
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 10:14:34 2017 -0600
Spirit: Add general interfaces.
commit 121845a8f229ec2c88e5721da5512135f6624ee5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 09:41:23 2017 -0600
Spirit: Bring in last of GPIO interfaces.
commit 279bfcc92bcd0cfa48c0ed7862fa2b75fbee99b8
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 17:09:19 2017 -0600
Spirit: Add some missing configuration options: Add register -level debug options.
commit 4be89324a5908e35afc70373c279f4d05f62b48f
Merge: 66e87f9bb3 598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-27 11:56:26 -06:00
Gregory Nutt
e75e3eb807
drivers/analog: Fix some data alignment issues in the ADC driver.
2017-07-27 08:09:21 -06:00
Jeff
552ed255f6
Add support for inverted LEDS. See common anode RGB LED discussion in the Yahoo group
2017-07-27 07:43:59 -06:00
Gregory Nutt
598386ef90
Squashed commit of the following:
...
commit 66e87f9bb3ef75fddf25400bc08475c5e6ad4c30
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 15:19:56 2017 -0600
Spirit: Brings in last of PktBasic logic.
commit 8b4c89d6a103003fa04363e2c2ae7b9ee390bf49
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 11:55:50 2017 -0600
Spirit: Bring in AES and MBUS logic.
commit d00022d39ab0ce839de29386949481e5c24feff3
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 09:22:03 2017 -0600
Spirit: Bring in remainder of calibration interfaces.
commit 40b4b2f902e04293f8940551a97a9a24a48988dd
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 08:44:32 2017 -0600
Spirit: Bring in DirectRF interfaces.
commit 7c109608e1a2989f3edbc2fd939a2d225fff382a
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 07:46:19 2017 -0600
Spirit: Add CSMA support.
commit 0f88896595d162c4ac6138e7b1af2fc35c865b3d
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 18:57:43 2017 -0600
Spirit: Add some initial TX logic to network driver.
commit 4dc7058dfcdcf40980578680b7e1a4206dea4ea2
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 17:02:11 2017 -0600
Spirit: Completes ports of spirit_management.* files
commit c904eef51d929e041b87d0c8aff6fa3c2f895341
Merge: 91e985a877 c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-26 15:35:42 -06:00
Gregory Nutt
c9ff8cbab9
Squashed commit of the following:
...
commit 91e985a87729017a66d19276c4d47681064f95ea
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 15:13:54 2017 -0600
Spirit: Add a few more functions that will soon be needed for packet transmission.
commit b5981d29983907c2194fbc26af4b72ad532bee78
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 13:30:07 2017 -0600
Spirit: Finish off some initialization issues; Started some interrupt handling logic.
commit c21073e0bc2870b3d9ba40bdfdfd5151ce4f5890
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 09:35:52 2017 -0600
Spirit: Completes very basic radio initialization for network driver
commit 1b544334361c54f46bcf0ba313c125932e8dafc6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 07:58:30 2017 -0600
Spirit: Add more radio initialization logic... getting closer.
commit 45d1047db60843c57d394ec910c63e7c127671e0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 19:15:33 2017 -0600
Spirit: add some CSMA initialization logic
commit bcf55c71336d48947fe19bb09a799169852301c2
Merge: 89e9d426e9 2fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-25 15:14:35 -06:00
Gregory Nutt
2fc0fbcf7e
Squashed commit of the following:
...
commit 89e9d426e91c056e659fccf5e5c4392618f8f777
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 16:44:19 2017 -0600
Update some comments
commit 9c5d8a5833350006ed389e898b11c8c8a20e5f4f
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 16:15:54 2017 -0600
Spirit: Rename drivers/wireless/spirit/src to lib. Move Spirit network driver out of IEEE802.15.4 into drivers/wireless/spirit/drivers
commit cabc0ec9e6eb558dcb715ab17264383aa0105e7a
Merge: 87b616414a 6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-24 16:46:30 -06:00
Gregory Nutt
6bd744c4b3
Fix some minor issues in drivers/net/skeleton.c
2017-07-24 15:38:13 -06:00
Gregory Nutt
4be064d19a
Move SMPS driver to drivers/power (and header to include/nuttx/power). Rename debug to IOCTLs to more general power naming; create a separate file to coordinate power-related IOCTL commands.
2017-07-23 07:35:09 -06:00
raiden00pl
87ca3d1521
Merge remote-tracking branch 'upstream/master'
2017-07-23 11:37:24 +02:00
raiden00pl
a880f78f57
add generic upper-half driver for SMPS
2017-07-23 11:36:18 +02:00
Gregory Nutt
49d78f7b55
ADC: Some trivial coding standard changes.
2017-07-22 16:59:46 -06:00
Gregory Nutt
e4c0b889d7
Cosmetic fix to some spacing
2017-07-21 07:52:07 -06:00
Gregory Nutt
2bb3ad2e98
USB MSC: Add missing logic to define endpoints. The composite changes broke the the non-composite, USB MSC only case because it omitted the critical setup when USB MSC was not part of the composite.
2017-07-20 10:07:53 -06:00
Gregory Nutt
ee0c035a6d
USB device: Rename usbdev_description_s to usbdev_devinfo_s to avoid any more confusion of naming with device descriptions in the future. Instances of usbdev_devinfo_s are now called devinfo vs devdesc when is a bad naming collision.
2017-07-20 09:34:48 -06:00
Gregory Nutt
42efcbe3a9
Merge remote-tracking branch 'origin/master' into beacon802154
2017-07-20 08:04:41 -06:00
Gregory Nutt
951017da55
CDC/ACM: Part of previous change was incorret.
2017-07-19 09:11:13 -06:00
Gregory Nutt
940b78cac2
USB device: Fix some coding standard issues. Other purely cosmetic changes.
2017-07-19 09:00:01 -06:00
Gregory Nutt
646b28223a
CDC/ACM. Fix several known problems resulting from merge of USB composite device. That merge now breaks some of the non-composite USB devices. These fixes are for CDC/ACM.
2017-07-19 07:05:23 -06:00
Anthony Merlino
c13bd23ed9
drivers/mrf24j40: Trivial whitespace fix
2017-07-16 23:51:24 -04:00
Anthony Merlino
8610723ee6
ieee802154: Adds some wlinfo logs for debugging
2017-07-16 23:51:24 -04:00
Anthony Merlino
acc1ecd9a9
drivers/mrf24j40: Fixes math error for calculating sleep count values
2017-07-16 23:51:24 -04:00
Gregory Nutt
2f01b92fe2
Merge remote-tracking branch 'origin/master' into beacon802154
2017-07-16 08:58:39 -06:00
Frank Benkert
eacb4f0e84
Squashed commit of the following:
...
commit 69fcf3e84928eb253401e6af1b9994771c3674115d67ddda4e0729151d2974b916ff84cfaa4ece138143563be669d3a91ef155a4388bbd428f2147aff1cc168a5c246afcaa10919877191d02c6672868919877191d82129cf8c6f2cb8b252a6537e4ea20f2cb8b252a676cfd526a1ea0368c18e485caced96443c2962123cbc28b051674cb8c8e6bc881a1925033a6def76bc881a192fe3af4941d85b8d16d8cfe3af4941d0f9ad16e181bc0eea1430f9ad16e18a4cd90d4efaa2e9c15a5a4cd90d4ef8a4be7175e31f832d8c58a4be7175e18a32ed2caae1771454a18a32ed2caaaa81ce4976d8df90b79aaa81ce4974eb548226b8cb4636bb14eb548226b2327f5a1b4dc8eec0b612327f5a1b449cd279fc699bf0b522b49cd279fc6bb6a13f30a46f86982eebb6a13f30a918480047aac93d4bda9918480047ae4d262436c4526cd665ee4d262436c815257743dac13619dc59dd41bdd2ffc1438c95d049ccbfcbeff2b54a5e0049ccbfcbeef33329e3a89f77cd91a0bb7af549abd9b5489147e6f481581dcc9b07715
2017-07-16 08:43:17 -06:00
Anthony Merlino
bd821dafcb
drivers/mrf24j40: Fixes line endings in file
2017-07-13 03:23:19 -04:00
Anthony Merlino
350776eca3
drivers/mrf24j40: Fixes issues with sleeping for beacon enabled networking
2017-07-13 03:18:22 -04:00
Anthony Merlino
21bc4175fe
drivers/mrf24j40: Adds header guards to mrf24j40_reg.h
2017-07-12 14:37:17 -04:00
Anthony Merlino
b1eb796d97
drivers/mrf24j40: Hook in setdevmode from newly added radio attribute setting
2017-07-12 00:54:29 -04:00
Anthony Merlino
f944a33485
drivers/mrf24j40: Fixes implicit declaration warning
2017-07-11 23:47:09 -04:00
Anthony Merlino
c3f51dce70
drivers/mrf24j40: Formatting fixes
2017-07-11 23:46:39 -04:00
Gregory Nutt
4ad0f8b68b
trivial
2017-07-11 19:45:22 -06:00
Anthony Merlino
3148e62ca1
drivers/wireless/ieee802154/mrf24j40: Aligns better with coding standard after splitting up driver
2017-07-11 21:12:50 -04:00
Anthony Merlino
0eaf2925cf
drivers/wireless/ieee802154/mrf24j40/: Fixes bug causing radio to cease transmitting
2017-07-11 21:11:52 -04:00
Anthony Merlino
35289e6d0e
ieee802154: Minor reformatting
2017-07-11 20:36:50 -04:00
Anthony Merlino
bbf37a0db8
drivers/wireless/ieee802154/mrf24j40: Fixes issue with non-beacon enabled mode
2017-07-10 13:11:43 -04:00
Anthony Merlino
28d1db02b8
drivers/wireless/ieee802154/mrf24j40: Splits up driver into multiple files to make it easier to navigate
2017-07-10 13:11:43 -04:00
Anthony Merlino
deeb52cedc
drivers/wireless/ieee802154/mrf24j40: Minor timing fix. Matches recommended value in datasheet
2017-07-10 13:11:42 -04:00
Anthony Merlino
0aabea2662
drivers/wireless/ieee802154/mrf24j40: Fixes odd extra spacing that mysteriously got introduced
2017-07-10 13:11:42 -04:00
Anthony Merlino
b9a9ba7dd0
ieee802154: Adds configuration options for verbose logging of certain features, to aid in debugging
2017-07-10 13:06:12 -04:00
Gregory Nutt
b35ee01d6a
Merge remote-tracking branch 'origin/master' into beacon802154
2017-07-09 16:53:33 -06:00
Gregory Nutt
975473fed8
ICMPv6: Add 6LoWPAN and IP forwarding support.
2017-07-09 11:35:26 -06:00
Gregory Nutt
77b99c9a32
Merge remote-tracking branch 'origin/master' into beacon802154
2017-07-07 20:23:31 -06:00
Gregory Nutt
99ef7c6669
IP forwarding: A few fixes from early testing; In TUN driver, do all polling on worker thread. Otherwise, the stack gets very deep.
2017-07-07 17:33:44 -06:00
Gregory Nutt
b29c99fa6f
Move TUN ioctl commnd to include/nuttx/net/ioctl.h so that it will always be unique. It a error in netdev_register: it was not handling device names properly when TUN is the only network device.
2017-07-07 13:03:04 -06:00
Julien Lecoeur
165ee0027a
Eliminate a warning with arm-none-eabi-gcc 7.1.0
2017-07-06 08:32:51 -06:00
Gregory Nutt
69d3188687
Merge branch 'beacon802154' of bitbucket.org:nuttx/nuttx into beacon802154
2017-07-05 11:06:40 -06:00
Jan Pobrislo
7999822189
I've found that the interrupts aren't enabled since nothing updates them after btn_poll() marks the file descriptor structure as being polling. I've managed to make it work with this change.
2017-07-04 14:43:19 -06:00
Gregory Nutt
053b6e3d9f
Fix dangling white space at the end of lines.
2017-07-03 10:08:49 -06:00
Anthony Merlino
d05cf268da
drivers/wireless/ieee802154: Moved radios to individual sub-directories
2017-07-03 00:33:17 -04:00
Anthony Merlino
7d9c4ace34
ieee802154: Cleans up some wireless logging
2017-07-01 17:05:42 -04:00
Anthony Merlino
5ca18999a5
ieee802154: Random fixes to get beacon-enabled networking more stable
2017-07-01 17:05:42 -04:00
Anthony Merlino
b981ced4d4
ieee802154: Finishes beacon association functionality
2017-07-01 17:05:42 -04:00
Anthony Merlino
6b17d5ccc9
ieee802154: Minor changes to align closer with coding standard
2017-07-01 17:05:42 -04:00
Gregory Nutt
95e20afcd2
drivers/: Remove dangling space at the end of lines.
2017-06-28 13:17:17 -06:00
Jussi Kivilinna
4eaa136850
smart: fix wrong freeing of device structure and use-after-free issues on error paths
2017-06-28 07:20:07 -06:00
Anthony Merlino
da8afe9d9e
ieee802154: Finishes transmission of beacon frames, and performing a passive scan
2017-06-25 18:08:00 -04:00
Anthony Merlino
683bd6e10e
ieee802154: Adds some missing elements to start support for beacon-enabled networks
2017-06-25 18:08:00 -04:00
Masayuki Ishikawa
32a8d09901
drivers/net/tun.c: Use critical section instead of semaphore in tun_ifdown()
2017-06-23 14:28:53 +09:00
Gregory Nutt
05590a2228
6LoWPAN: Correct a few addressing issues. The apps/examples/udp test now appears to be fully functional. Also reserve two bytes at the end of the frame for the FCS.
2017-06-21 13:43:53 -06:00
Gregory Nutt
2397bc728b
Add some comments to a Kconfig file; Fix a typo introduced in previous commit.
2017-06-21 10:40:36 -06:00
Gregory Nutt
8db9461e0e
mrf24j40: Fix a warning (which is actually an error)
2017-06-21 10:28:52 -06:00
Oleg Evseev
8082a5d3dc
Merged in lukegluke/nuttx (pull request #411 )
...
Use struct instead of pointer to the struct as sizeof argument in memset in usbmsc.c
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-06-19 17:51:11 +00:00
Oleg Evseev
794ecbfd86
Use struct instead of pointer to the struct as sizeof argument in memset in usbmsc.c
...
Otherwise it leads to error: argument to 'sizeof' in 'memset' call is the same pointer type 'struct usbmsc_lun_s *' as the destination
2017-06-19 19:45:35 +03:00
Anthony Merlino
b1ce07deb1
Swithches IEEE 802.15.4 based code to using byte arrays instead of uint16_t values for short address and PAN ID
2017-06-19 05:55:28 -04:00
Gregory Nutt
698dd6d7d1
Merge remote-tracking branch 'origin/master' into ieee802154
2017-06-18 08:23:42 -06:00
Gregory Nutt
afa0ab0819
Remove dangling whitespace form the end of lines
2017-06-17 14:13:25 -06:00
Oleg Evseev
70adff3ffc
Merged in lukegluke/nuttx/lukegluke/kconfig-correction-edited-online-with-bi-1497624177393 (pull request #401 )
...
Kconfig correction
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-06-16 23:34:22 +00:00
Oleg Evseev
31bde601b6
Kconfig correction
...
edited online with Bitbucket
2017-06-16 14:43:11 +00:00
Gregory Nutt
77757410c8
Remove dangling white space at the end of lines.
2017-06-15 10:46:48 -06:00
Gregory Nutt
535ea4e0f5
Merge remote-tracking branch 'origin/master' into ieee802154
2017-06-15 10:34:38 -06:00
Gregory Nutt
4a88d6a50a
Merge branch 'ieee802154' of bitbucket.org:nuttx/nuttx into ieee802154
2017-06-15 10:32:55 -06:00
Anthony Merlino
e30501ebd4
wireless/ieee802154: Lots of fixes, cleanup, new functionality. Functional
2017-06-15 12:11:52 -04:00
Gregory Nutt
04ae3d51c2
drivers/mp2515.c: Remove an incorrect warning.
2017-06-14 10:13:38 -06:00
Gregory Nutt
a86f46bc54
MCP1515: Eliminate some warnings
2017-06-14 09:38:58 -06:00
Anthony Merlino
908d438047
WIP: wireless/ieee802154: More work on association/beacon-enabled networks
2017-06-14 02:49:32 -04:00
Jussi Kivilinna
7b8df1b930
mtd/w25: wait for BUSY flag to clear in w25_readid and w25_unprotect. W25Q128 datasheet says that all instructions expect 'Read Status Register' and 'Erase/Program Suspend' are ignored when BUSY flag in status register is '1'. Therefore wait for busy flag to clear in w25_readid() and w25_unprotect().
2017-06-13 07:35:49 -06:00
Jussi Kivilinna
2596b14c90
mtd/w25: add missing locking and fix SPI_SELECT usage for w25_unprotect
2017-06-13 07:33:34 -06:00
Gregory Nutt
0a85a41678
MTD FLASH driver: Clone Sebastien Lorquet's m25px change to at25, is25xp, ramtron, and sst25xx.
2017-06-12 09:51:42 -06:00
Sebastien Lorquet
2851959dee
MTD M2PX: If we READ while a write/erase is pending, the command is ignored and the write/erase continues. If we dont catch this situation we will return garbage to the user because the flash will not execute the command. So READ MUST wait for write completion, and before that, the bus must be locked since it's a precondition to calling waitwritecomplete().
2017-06-12 09:34:09 -06:00
Gregory Nutt
d35a060a41
Revert "MTD: Fix problems in SPI locking in mp25x.c driver. Same problem probably in exists in several other drivers that derive from this this driver as well."
...
This reverts commit 85645284b3
2017-06-12 07:23:06 -06:00
Sebastien Lorquet
85645284b3
MTD: Fix problems in SPI locking in mp25x.c driver. Same problem probably in exists in several other drivers that derive from this this driver as well.
2017-06-12 06:38:27 -06:00
Gregory Nutt
670d6a1e8d
MTD FLASH drivers: The byte write method of several drivers had a cloned error: It was not locking the bus while performing byte write operations.
2017-06-06 16:10:41 -06:00
Juha Niskanen
e577072790
power: battery_charger: add ioctl for charging input current
2017-06-06 06:56:50 -06:00
Juha Niskanen
06edfae133
mtd/config: Add some error checks for I/O errors
2017-06-01 06:22:27 -06:00
Juha Niskanen
32610b53f4
drivers/{sensors,usbmisc}: Fix uninitialized I2C frequency
2017-06-01 06:19:54 -06:00
Jussi Kivilinna
1cc842794d
drivers/rwbuffer.c: Fix compiler warnings
2017-05-31 09:28:20 -06:00
Jussi Kivilinna
7af5cbb833
drivers/mtd/w25.c: Enable short delay after sector/chip erase
2017-05-31 09:17:58 -06:00
Jussi Kivilinna
8b006e705e
drivers/mtd/w25.c: erase sector only if it is not in erased state
2017-05-31 09:09:24 -06:00
Jussi Kivilinna
c7fcdf968d
mtd/smart: Fix use of uninitialized variable
2017-05-31 09:07:25 -06:00
Juha Niskanen
80cc19d6b0
drivers/input: add Cypress MBR3108 CapSense touch button driver
2017-05-31 06:31:53 -06:00
Gregory Nutt
ae17e6bcf0
Cosmetic
2017-05-30 12:04:48 -06:00
Alan Carvalho
2b3eb7344c
Merged in acassis/nuttx_acassis/pcd8544 (pull request #381 )
...
Pcd8544
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-26 14:44:23 +00:00
Alan Carvalho de Assis
96e1a80f99
Replace the structure initializer with C89 style
2017-05-26 11:36:36 -03:00
Alan Carvalho de Assis
8df5c29857
Add driver for Nokia 5110 (Philips PCD8544)
2017-05-26 10:53:13 -03:00
Jussi Kivilinna
7ae8173449
button_upper: fix interrupt enabling for poll-events
2017-05-24 08:06:13 -06:00
Alan Carvalho de Assis
bab5de15f6
Remove warning from MCP2515 compilation
2017-05-23 19:41:58 -03:00
Alan Carvalho de Assis
fb7866bdc8
Use the right variable name at mcp2515_txready()
2017-05-23 19:30:12 -03:00
Gregory Nutt
38ae28e978
MCP2515: Changes from review of last PR
2017-05-23 12:22:49 -06:00
Alan Carvalho de Assis
eb7373cedf
Add Microchip MCP2515 CAN Bus controller driver
2017-05-23 14:28:52 -03:00
Masayuki Ishikawa
810f9b516c
drivers/bch: Fix 'Missing Unlock' in bchdev_driver.c
...
Jira: PDFW15IS-265
Coverity-ID: 10597
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2017-05-22 14:29:41 +09:00
Nobutaka Toyoshima
a862b653bd
Replace sprintf() with snprintf() in pipe.c
...
Jira: PDFW15IS-265
Coverity-ID: 10696
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2017-05-22 09:22:23 +09:00
Taras Drozdovsky
4ab2a3661e
STM32F4: add cs43l22 audio driver and i2s driver
2017-05-21 14:14:09 -06:00
Gregory Nutt
679a08e371
Merge remote-tracking branch 'spiriou/wapi_scan'
2017-05-21 09:25:02 -06:00
Simon Piriou
a332c4b9ce
bcmf: fix issue in AP scan event processing
2017-05-21 16:04:24 +02:00
Simon Piriou
6b15c26e56
bcmf: add SIOCGIWSCAN ioctl support
2017-05-20 22:13:15 +02:00
Gregory Nutt
bc32eaa228
Merge remote-tracking branch 'origin/master' into ieee802154
2017-05-19 07:17:37 -06:00
Gregory Nutt
5ce2ece134
syslog: Add header file inclusion to eliminate a warning; mm/iob: private function needs static storage class.
2017-05-16 12:26:23 -06:00
Jussi Kivilinna
a6e556d31c
I had to make following change to fix interrupt context syslog (INTBUFFER untested)
2017-05-16 10:56:49 -06:00
Gregory Nutt
9fb2fed90e
Merge remote-tracking branch 'origin/master' into ieee802154
2017-05-16 08:05:38 -06:00
EunBong Song
5ef00f0b91
drivers/bch: BCH character driver bch_ioctl() always returns -ENOTTY for DIOC_GETPRIV command. It should returns OK if DIOC_GETPRIV command succeeds.
2017-05-16 08:01:05 -06:00
Anthony Merlino
06634afbe0
wireless/ieee802154: Restructuring of MAC notifications. Simplifes some interfaces
2017-05-15 21:44:57 -04:00
Juha Niskanen
34e68a569b
drivers: rename newly introduced up_i2creset to I2C_RESET
2017-05-15 07:22:17 -06:00
Juha Niskanen
b9a769d65d
drivers: fix some bad NULL checks
2017-05-15 07:20:32 -06:00
Gregory Nutt
fa649df52e
Photon: Small update from Simon Piriou.
2017-05-14 08:39:53 -06:00
Gregory Nutt
06db5614e7
Fix a warning about can.o appearing twice in the same rule.
2017-05-13 18:05:40 -06:00
Gregory Nutt
a52967a772
Syslog interrrupt buffer: eliminate a warning about an uninitialized variable; simply some related logic.
2017-05-13 17:40:46 -06:00
Gregory Nutt
14ae6df182
locale.h: Add a bogus definition of locale_t
2017-05-12 10:13:18 -06:00
Gregory Nutt
7698790be1
Changes from review of last PR
2017-05-12 09:04:52 -06:00
Gregory Nutt
f981191ac9
Merge branch 'can_bus' of bitbucket.org:nuttx/nuttx into can_bus
2017-05-12 08:59:57 -06:00
Gregory Nutt
fc7c3f5328
syslog: I think this might speed upt the CR-LF scan in syslog_dev_write().
2017-05-12 08:50:56 -06:00
Alan Carvalho de Assis
853d332b6c
Move CAN subsystem to its own directory and put device drivers there
...
Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
2017-05-12 11:48:47 -03:00
Gregory Nutt
c84a3e3519
Bitbucket Issue 47: Some of last syslog changes needed to be condition on #ifdef CONFIG_SYSLOG_BUFFER in order to be built without syslog buffering enabled.
2017-05-12 07:58:11 -06:00
Gregory Nutt
1c9859520f
syslog: There is yet another place where the output can get split. That is in syslog_dev_write(): It will break up the stream to insert a CR before the LF. This can that can be avoid be generating the CR-LF sequence in the buffer and then detecting and ignoring valid CR-LF sequences, rather than expecting syslog_dev_write() to insert the CR in this case.
...
I don't like the idea that syslog_dev_write() still scans the entire output buffer to expand CR-LF sequence. This seems really wasteful, especially in this case where we can be sure that the is no CR or LF without a matching LF or CR. Bu, I think, the existing behavior in syslog_dev_write() must be retained because it is needed in other contexts.
2017-05-12 07:31:50 -06:00
Gregory Nutt
0fc068cc9c
syslog: Avoid flushing syslog_stream buffer, if possible, until lib_vsprintf() completely parses the format. This assures that the flush will flush the entire output, even data that may potentially follow the linefeed. And, in that case, it cannot be interleaved with other devug output. Suggested by Jussi Kivilinna.
2017-05-12 06:58:33 -06:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Juha Niskanen
0f7210b0ae
mtd: fix some unallocated and NULL pointer issues. rwb->wrflush and rwb->wrmaxblocks in rwbuffer could get unallocated values from ftl_initialize() in some configurations. Also fixes related assert:
...
up_assert: Assertion failed at file:rwbuffer.c line: 643
that can happen with the following configuration:
CONFIG_FTL_WRITEBUFFER=y
CONFIG_DRVR_WRITEBUFFER=y
# CONFIG_FS_WRITABLE is not set
These problems are caused by CONFIG variable differences between the buffer layers. TODO: This is not a perfect solution. readahead support has similar issues.
2017-05-11 07:22:21 -06:00
Juha Niskanen
58a0b09b82
mtd/config: fix byte read interface test
2017-05-11 07:19:24 -06:00
Juha Niskanen
797e3c3ca4
mtd: build RAMTRON and AT45DB drivers only if selected
2017-05-11 07:17:29 -06:00
Gregory Nutt
b5c1dd09f5
Syslog: Need inclusion of errno.h for fix building with CONFIG_SYSLOG_TIMESTMAP=y
2017-05-11 07:15:57 -06:00
Jussi Kivilinna
ba933efd9e
When syslog message has addition characters after last new-line. With buffering those now get lost as vsyslog does not flush output after lib_sprintf. Additional trailing characters could be ANSI escape sequence to reset state that message setups. For example, macro here uses colors and resets state after actual message (including '\n'):
...
With flushing added to vsyslog, then there is problem that next syslog line might come from other task before reset sequence, causing wrong line getting color. This could be avoided by not flushing on '\n' but only if IOB is full and/or at end of vsyslog. Would this make sense?
2017-05-11 07:11:35 -06:00
Gregory Nutt
d3b9f5b37f
Syslog buffering: Use IOBs to buffer data, not an on-stack buffer
2017-05-10 17:36:08 -06:00
Gregory Nutt
d8a83f16be
Syslog buffering: Various corrections from early debug
2017-05-10 16:13:21 -06:00
Gregory Nutt
00075acada
Merge branch 'syslog' of https://bitbucket.org/nuttx/nuttx into syslog
2017-05-10 15:04:57 -06:00
Gregory Nutt
20727d17c3
SYSLOG: Add option to buffer SYSLOG output to avoid interleaving.
2017-05-10 14:42:43 -06:00
Floxx
c2096f17d6
Moved LIS3DSH from the I2C-dependent block to the SPI-block to make Make.defs consistent with the driver (SPI only) and drivers/sensors/Kconfig.
2017-05-10 20:18:48 +02:00
Juha Niskanen
4f18b40429
mtd/config: erase block between block read and write
2017-05-10 08:25:39 -06:00
Stefan Kolb
591f35be87
I discovered a problem in the file drivers/serial/serial.c concerning the function uart_close(…). In the case that a serial device is opened with the flag O_NONBLOCK the function uart_close(…) blocks until all data in the buffer is transmitted. The function close(…) called on an handle opened with O_NONBLOCK should not block. The problem occurred with a CDC/ACM device.
2017-05-10 07:59:58 -06:00
Anthony Merlino
806dcd9a47
wireless/ieee802154: Brings closer to Nuttx coding style
2017-05-09 17:20:57 -04:00
Gregory Nutt
2043e1a114
IOBs: Move from driver/iob to a better location in mm/iob
2017-05-09 07:35:30 -06:00
Anthony Merlino
3fa8e32e36
wireless/ieee802154: MRF24J40: Finishes receive functionality, supports promicuous mode, and rxonidle attributes
2017-05-08 16:23:13 -04:00
Anthony Merlino
1490599b69
wireless/ieee802154: Reworks data_ind allocation to include IOB allocation/deallocation. Hides private data.
2017-05-06 10:20:19 -04:00
Anthony Merlino
dd40014279
wireless/ieee802154: Removes radio IOCTL. Starts bringing radio and MAC closer with well-defined interface.
2017-05-05 11:15:38 -04:00
Anthony Merlino
2c57c3f83b
wireless/ieee802154: Changes rxenable at radio layer
2017-05-05 11:15:38 -04:00
Gregory Nutt
6a45afdd75
Merge remote-tracking branch 'origin/master' into ieee802154
2017-05-04 07:11:19 -06:00
Gregory Nutt
88be413a05
Remove dangling whitespace at the end of lines.
2017-05-03 18:30:40 -06:00
Gregory Nutt
97f149a40b
Photon: Cosmetic changes to style detected by tools/nxstyle
2017-05-03 18:20:57 -06:00
Simon Piriou
b5e1ea4bef
bcmf: fix frame not freed when dropped + cleanup
2017-05-03 23:19:28 +02:00
Gregory Nutt
2ece0c57dd
Remove dangling whitespace at the end of lines
2017-05-02 14:42:40 -06:00
Gregory Nutt
e94865a317
Merge remote-tracking branch 'origin/master' into photon
2017-05-02 08:49:19 -06:00
Simon Piriou
bd5d6ce986
bcmf: implement basic wext interface for authentication
2017-05-02 08:48:13 -06:00
Anthony Merlino
f02d98d15e
wireless/ieee802154: Changes transmit data path to use IOBs and exposes function for getting size of MAC header
2017-05-02 09:58:54 -04:00
Mateusz Szafoni
1feaae7222
Merged in raiden00/nuttx (pull request #338 )
...
OPAMP support for STM32F33XX
2017-05-02 13:57:56 +00:00
Anthony Merlino
ea44684f0c
Merged in merlin17/nuttx/ieee802154 (pull request #339 )
...
Ieee802154
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-02 13:22:38 +00:00
Gregory Nutt
e87991bbdc
Merge remote-tracking branch 'origin/master' into ieee802154
2017-05-01 18:05:38 -06:00
Anthony Merlino
c4007a111c
wireless/ieee802154: Fixes semaphore logic and list logic
2017-05-01 09:27:44 -04:00
Gregory Nutt
e43b86dbd0
Merge remote-tracking branch 'origin/master' into photon
2017-04-30 17:42:37 -06:00
Simon Piriou
fe77735960
bcmf: add netdev support for Broadcom FullMAC driver
2017-04-30 20:36:35 +02:00
Gregory Nutt
193ff349ee
drivers/i2c: Fix compile issus if CONFIG_DISABLE_PSEUDOFS_OPERATIONS is enabeld.
2017-04-30 08:02:38 -06:00
raiden00pl
0b6190c1c4
drivers/analog: Add basic OPAMP driver
2017-04-30 11:11:17 +02:00
Gregory Nutt
a7901f5c4c
Merge remote-tracking branch 'origin/master' into photon
2017-04-29 12:35:01 -06:00
Gregory Nutt
c7264eb550
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:28:19 -06:00
Gregory Nutt
f826877c61
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-29 12:27:49 -06:00
Gregory Nutt
e9a5477506
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:26:52 -06:00
Gregory Nutt
3482172a16
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-29 10:06:35 -06:00
Simon Piriou
0d1a79719a
bcmf: add escan ioctls support + cleanup
2017-04-28 19:44:48 +02:00
Sebastien Lorquet
0138a79028
bitbang
2017-04-28 18:15:42 +02:00
Gregory Nutt
f1aa43512a
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-27 17:00:11 -06:00
Gregory Nutt
2e6908b384
IOCTLS. Separate wireless character driver IOCTL commands from wireless network driver IOCTL commands. Move from wireless.h to ioctl.h.
2017-04-27 16:58:30 -06:00
Gregory Nutt
a134178034
Enabled wireless IOCTL commands in photon/wlan configuration
2017-04-26 12:30:18 -06:00
Anthony Merlino
b52de42d16
Merged in merlin17/nuttx/ieee802154 (pull request #336 )
...
wireless/ieee802154: Lots of little fixes and changes to get everything to build
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-04-26 16:50:56 +00:00
Gregory Nutt
7d8140708e
Merge remote-tracking branch 'origin/master' into photon
2017-04-26 10:42:19 -06:00
Gregory Nutt
feba99e99c
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-26 10:39:45 -06:00
Jussi Kivilinna
e835803166
yslog: use monotonic clock for timestamp when available
2017-04-26 10:38:15 -06:00
Anthony Merlino
9e760dcf6a
wireless/ieee802154: Lots of little fixes and changes to get everything to build
2017-04-26 11:36:06 -04:00
Simon Piriou
6bb2db8c15
bcmf: enable DMA for SDIO transfers
2017-04-26 17:23:53 +02:00
Gregory Nutt
ace460ad0e
configs/photon/src/stm32_wlan.c: Remove unused, inappropriate network driver registration.
2017-04-25 13:02:50 -06:00
Gregory Nutt
c5e636ad84
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-24 17:34:35 -06:00
Gregory Nutt
51f6ce7af3
Merge remote-tracking branch 'origin/master' into photon
2017-04-24 15:12:02 -06:00
Gregory Nutt
62fc578661
wireless/ieee80211: Add BSD license information to all files (except the Broadcom files -- need to revisit those).
2017-04-24 15:11:22 -06:00
Simon Piriou
a23ac02959
bcmf: register network driver + update defconfig file
2017-04-24 20:04:47 +02:00
Simon Piriou
d72f36948e
bcmf: fix Kconfig file
2017-04-24 20:02:20 +02:00
Gregory Nutt
a57c79e8b3
wireless/ieee80211: Add broadcom network device registration logic.
2017-04-24 10:43:57 -06:00
Gregory Nutt
e507a3f295
wiress/ieee80211: Broadcom network driver needs to register as an ieee802.11 driver, not an Ethernet driver.
2017-04-24 10:28:06 -06:00
Gregory Nutt
50fb7b0ba0
wireless/ieee80211: Add skeleton for a broadcom network driver.
2017-04-24 10:23:31 -06:00
Masatoshi Tateishi
80e22691fa
USBMSC: Fix a wrong lun number issue
...
Jira: PDFW15IS-98
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2017-04-24 09:48:49 +09:00
Gregory Nutt
0ac6fbb3c7
drivers/ieee80211/: Change all occurrences of _info, _warn, and _err to wlinfo, wlwarn, and wlerr.
2017-04-23 16:24:47 -06:00
Simon Piriou
c0862c862f
photon: cleanup and refactor bcmf driver
2017-04-23 23:39:17 +02:00
Gregory Nutt
62966d915c
Merge remote-tracking branch 'origin/master' into photon
2017-04-23 10:16:54 -06:00
Simon Piriou
a76266106a
photon: fix compilation errors and update wlan defconfig
2017-04-23 10:00:19 -06:00
Gregory Nutt
0ea071f7eb
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-22 11:58:07 -06:00
Gregory Nutt
79256573e1
net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment.
2017-04-22 11:10:30 -06:00
Gregory Nutt
d8e4cbcfd5
Merge remote-tracking branch 'spiriou/wlan_dev' into photon
2017-04-22 08:26:40 -06:00
Simon Piriou
22e5cec376
photon: add basic wlan scan function
2017-04-22 15:57:51 +02:00
Gregory Nutt
309f0abc14
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-21 16:34:10 -06:00
Gregory Nutt
d5207efb5a
Be consistent... Use Name: consistent in function headers vs Function:
2017-04-21 16:33:14 -06:00
Anthony Merlino
b1c8f008d6
wireless/ieee802154: Simplifies TX completion interface. Documents and cleans up some functions
2017-04-21 14:57:27 -04:00
Anthony Merlino
795e70a952
wireless/ieee802154: Work on packet reception at radio layer (MRF24J40)
2017-04-21 13:06:26 -04:00
Gregory Nutt
d08b802998
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-20 16:19:42 -06:00
Gregory Nutt
356e71850b
IOB: A file needed to include iob.h
2017-04-20 16:18:57 -06:00
Gregory Nutt
bfb93338f6
Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled.
2017-04-20 16:08:49 -06:00
Gregory Nutt
e3c9e9e0b8
UART 16550: Missing left parenthesis in function prototype. This is Bitbucket Issue #41 .
2017-04-20 06:50:11 -06:00
Anthony Merlino
a5d73e42cd
wireless/ieee802154: Fixes radio callback arguments
2017-04-19 18:15:09 -04:00
Gregory Nutt
9a1fe0b971
ieee802154: Cosmetic changes from review of last PR.
2017-04-19 14:52:45 -06:00
Anthony Merlino
1abe4ae4da
wireless/ieee802154: Starts structuring transmission completion handling
2017-04-19 16:35:02 -04:00
Anthony Merlino
37e7c67373
wireless/ieee802154: Changes radio interface to match MAC callback design
2017-04-19 13:26:44 -04:00
Gregory Nutt
35756d6295
ieee802.15.4: Cosmetic changes from review of last PR.
2017-04-18 14:25:23 -06:00
Anthony Merlino
9ad3b375e5
wireless/ieee802154: Lots of small fixes to eliminate build issues.
...
Generally cleans things up and fixes lots of small issues preventing a successful build. Does not completely build, but there are significantly less errors
2017-04-18 15:34:28 -04:00
Gregory Nutt
52cddc45de
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-18 10:38:08 -06:00
Gregory Nutt
04ebdbb336
Move: CONFIG_ADC_NO_START_CONV from drivers/adc/Kconfig to arch/arm/src/stm32[f7]/Kconfig as STM32[F7]_ADC_NO_START_CONV. Refresh all configurations with any reference to CONFIG_ADC_NO_START_CONV.
2017-04-18 07:16:35 -06:00
Gregory Nutt
6d3ec6e4a4
ieee802.15.4: Changes from review of last PR
2017-04-17 09:53:58 -06:00
Anthony Merlino
46d7a4bb03
wireless/ieee802154: Continues development on transmit structure
2017-04-17 11:34:41 -04:00
Simon Piriou
0434528732
photon: request firmware version and MAC address
2017-04-16 13:13:11 +02:00
Simon Piriou
d646bde1f8
photon: add sdpcm tx basic support
2017-04-16 11:28:08 +02:00
Anthony Merlino
d9e2139e46
wireless/ieee802154/mrf24j40: Renaming, added bind method
2017-04-15 13:20:33 -04:00
Gregory Nutt
85d97a4d74
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-15 09:34:03 -06:00
Gregory Nutt
78bc1aa6bc
Argument of network device IOCTL should be unsigned long, just as will all other IOCTL methods.
2017-04-15 09:33:27 -06:00
Simon Piriou
11d3db5c35
photon: add sdpcm + thread support for wlan
2017-04-15 11:39:13 +02:00
Gregory Nutt
6b8a8bda35
ieee802.15.4 radio: Remove interface methods that duplicate IOCTL commands.
2017-04-13 11:14:02 -06:00
Gregory Nutt
63b24bc686
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-13 09:57:26 -06:00
Gregory Nutt
55c95442e1
drivers/net/skeleton.c: Add support for IOCTL handling.
2017-04-13 09:53:38 -06:00
Gregory Nutt
8288f53d4e
ieee802154 radio: Implement IOCTL decode and dispatch in all radio drivers.
2017-04-13 09:13:16 -06:00
Gregory Nutt
56c5970b5b
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-13 06:57:45 -06:00
Gregory Nutt
ad9321b7b7
Trivial changes from review of last PR
2017-04-13 06:16:03 -06:00
Thomas Keh
7e293b28ee
TUN driver: Implement TAP (OSI layer 2) mode.
...
Enable by setting the IFF_TAP flag instead of the IFF_TUN flag in ifr_flags.
2017-04-13 13:07:03 +02:00
Gregory Nutt
c3a9c7eda6
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-09 10:16:57 -06:00
Gregory Nutt
a1aca89d61
drivers/net/skeleton.c: Use more common 'Name:' vs. 'Function:'
2017-04-08 13:55:23 -06:00
Gregory Nutt
8b8ddd05c2
Fix some old-style interrupt handling logic in drivers/net/skeleton.c
2017-04-08 13:30:30 -06:00
Gregory Nutt
11ad71a2e6
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-06 10:01:02 -06:00
Jussi Kivilinna
e3b3e57e56
RTC: add interface for check if RTC time has been set
...
New interface allows checking if RTC time has been set. This allows to application to detect if RTC has valid time (after
reset) or should application attempt to get real time by other means (for example, by launching ntpclient or GPS).
2017-04-06 09:53:11 -06:00
Jussi Kivilinna
e2702cbe4e
STM32F7: fix UART7 and UART8 IFLOWCONTROL options
2017-04-06 08:46:24 -06:00
Simon Piriou
e5c4a28c3a
photon: wlan support
2017-04-05 21:55:21 +02:00
Gregory Nutt
cdd3cb2201
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-05 13:18:52 -06:00
Gregory Nutt
cb70ce7d3c
6loWPAN: Correct some IPv6 addresses and operations on IPv6 addresses.
2017-04-05 12:11:09 -06:00
Gregory Nutt
e7f9d14118
Merge branch 'master' of bitbucket.org:nuttx/nuttx into ieee802154
2017-04-04 14:29:00 -06:00
Juha Niskanen
d64d4e02b4
sensors: lis2dh: fix hardfault when reading from unconfigured sensor
2017-04-04 07:38:49 -06:00
Gregory Nutt
1b3cb3752a
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-03 08:12:04 -06:00
Juha Niskanen
dfe6a672c1
drivers/sensors: Add driver for ST LIS2DH accelerometer. From Timo Voutilainen <time.voutilainen@haltian.com> et al.
2017-04-03 07:28:22 -06:00
Gregory Nutt
6d55ef0a08
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-01 09:08:35 -06:00
Gregory Nutt
52ead055fd
6loWPAN: Beginning of IEEE802.15.4 frame input logic.
2017-04-01 09:07:49 -06:00
Gregory Nutt
a43c0c9efb
Merge remote-tracking branch 'origin/master' into ieee802154
2017-03-31 06:41:11 -06:00
Juha Niskanen
9d13a2463f
drivers/usbmisc: Add driver for Fairchild FUSB301 USB type-C controller.
...
From Harri Luhtala <harri.luhtala@haltian.com>. Tested with earlier
version of NuttX; with current version checked that it compiles.
2017-03-31 06:35:36 -06:00
Juha Niskanen
b5b148fef8
drivers/sensors: Add driver for ST LPS25H pressure sensor
2017-03-31 05:53:43 -06:00
Gregory Nutt
916bd8a48f
HTS221 driver: Modify to use new interrupt parameter passing hooks.
2017-03-31 05:31:35 -06:00
Gregory Nutt
916bd80f9f
Merge remote-tracking branch 'origin/master' into ieee802154
2017-03-30 16:30:43 -06:00
Juha Niskanen
9e2b3da3e8
drivers/sensors: Add driver for ST HTS221 humidity sensor
2017-03-30 12:17:23 -06:00
Jussi Kivilinna
dffb8a67e3
Add entropy pool and strong random number generator
...
Entropy pool gathers environmental noise from device drivers, user-space, etc., and returns good random numbers, suitable for cryptographic use. Based on entropy pool design from *BSDs and uses BLAKE2Xs algorithm for CSPRNG output.
Patch also adds /dev/urandom support for using entropy pool RNG and new 'getrandom' system call for getting randomness without file-descriptor usage (thus avoiding file-descriptor exhaustion attacks). The 'getrandom' interface is similar as 'getentropy' and 'getrandom' available on OpenBSD and Linux respectively.
2017-03-30 07:38:37 -06:00
Anthony Merlino
8f67ec30a7
wireless/ieee802154: Removes ieee802154.h and makes other minor changes
2017-03-29 12:39:52 -04:00
Gregory Nutt
0fec3f9541
Merge remote-tracking branch 'origin/master' into ieee802154
2017-03-28 15:02:54 -06:00
Martin Lederhilger
91f96b6ecb
drivers/analog: Add driver for the LTC1767L ADC.
2017-03-28 06:34:37 -06:00
Gregory Nutt
b0204909b2
Merge remote-tracking branch 'origin/master' into ieee802154
2017-03-27 18:16:19 -06:00
Gregory Nutt
6c4dac459a
lcd/: PCF8574 backpack logic needs to include poll.h CONFIG_DISABLE_POLL is not set.
2017-03-27 12:28:34 -06:00
Gregory Nutt
3fbf59e2bc
MRF24J40: Take advantage of new OS features for interrupt parameter passing.
2017-03-27 10:48:58 -06:00
Gregory Nutt
b315f0d851
AT86RF23x: Clean-up, standardize lower half interface. Take advantage of new OS features for interrupt parameter passing.
2017-03-27 10:28:03 -06:00
Gregory Nutt
a3304d206e
Merge remote-tracking branch 'origin/master' into ieee802154
2017-03-26 15:47:16 -06:00
Gregory Nutt
7d57a2b2bd
Trivial changes from review of last PR.
2017-03-25 10:38:41 -06:00
raiden00pl
be8207d493
drivers/analog: Add basic COMP driver
2017-03-25 16:50:11 +01:00
Gregory Nutt
e97a13ea90
MRF24J40/Clicker2: Add an MRF24J40 device configuration to the Clicker2 STM32 board. Fix a few errors discovered during build.
2017-03-24 13:49:40 -06:00
Anthony Merlino
7388816629
drivers/ieee802154: Moves defines to MAC layer and adjusts some addressing functionality
2017-03-24 11:10:35 -04:00
Gregory Nutt
0be851d339
Merge remote-tracking branch 'origin/master' into ieee802154
2017-03-22 14:26:20 -06:00
Masayuki Ishikawa
f50a075373
Merged in masayuki2009/nuttx.nuttx/lcd_aqm_1248a_support (pull request #287 )
...
drivers/lcd/st7565.c: Use ST7565_POWERCTRL_INT instead of ST7565_POWERCTRL_BRF
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-03-21 23:45:47 +00:00
Masayuki Ishikawa
e336d24898
drivers/lcd/st7565.c: Use ST7565_POWERCTRL_INT instead of ST7565_POWERCTRL_BRF
2017-03-22 08:21:22 +09:00
Masayuki Ishikawa
d4e7213ddc
Merged in masayuki2009/nuttx.nuttx/lcd_aqm_1248a_support (pull request #283 )
...
drivers/lcd/st7565.c: Extend to include support for the AQM_1248A
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-03-21 13:27:42 +00:00
Gregory Nutt
3872055daa
drivers/audio/wm8904: WM8904 has same problem as that fixed by Juha Niskanen in the MaxTouch driver.
2017-03-21 07:20:45 -06:00
Juha Niskanen
c3d9b86662
input/mxt: prevent overriding i2c transfer return value
...
put_reg/get_reg function was overriding i2c transfer error code with i2creset return value, that lead to OK status although actual transfer failed.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
Reported-by: Harri Luhtala <harri.luhtala@haltian.com>
2017-03-21 07:12:07 -06:00
Masayuki Ishikawa
591f91ebd3
drivers/lcd/st7565.c: Extend to include support for the AQM_1248A
2017-03-21 15:30:23 +09:00
Simon Piriou
1f71c8ced8
bcm: update driver
2017-03-20 22:40:25 +01:00
Heesub Shin
a10735b50d
mtd/progmem: fix incorrect target address calculation
...
progmem_read/write() is incorrectly calculating the target address,
expecting the offset argument is given in a block number. This is
completely wrong and as a result invalid flash region is accessed.
Byte-oriented read/write interfaces of mtd device accept the
target address in a byte offset, not a block number.
Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
2017-03-19 01:11:37 +09:00
Gregory Nutt
175f8960cf
Cosmetic changes from review of last PR
2017-03-18 06:47:34 -06:00
Brian Webb
0a95536b85
Adds driver support for the XBox One controller. Currently only the latest version (XBox One X) controller works. The older XBox One controllers do not enumerate correctly.
2017-03-17 20:48:21 -07:00
Gregory Nutt
25e4e3c314
Bring closer to NuttX coding standard.
2017-03-15 14:57:13 -06:00
Gregory Nutt
f985b52587
Integrate use of new wireless debug macros. Replace ad hoc debug macros. Convert obsolete dbg() macros to current info(), warn(), err() macros.
2017-03-15 14:37:17 -06:00
Gregory Nutt
15b2046748
Merge remote-tracking branch 'origin/master' into ieee802154
2017-03-15 14:32:05 -06:00
Gregory Nutt
57a1360c84
Add option to enable wireless debug output.
2017-03-15 14:31:01 -06:00
Gregory Nutt
fc6405d519
Bring closer to NuttX coding standard.
2017-03-15 14:16:19 -06:00
Simon Piriou
bf9391a1fe
photon: porting wlan device
2017-03-14 21:13:36 +01:00
Sebastien Lorquet
b5824d0993
Merge branch 'master' into ieee
2017-03-13 16:51:05 +01:00
Simon Piriou
e10ce5ce51
Photon: add basic support for wlan chip
2017-03-12 16:57:59 +01:00
Gregory Nutt
399f306744
A few cosmetic changes
2017-03-11 08:58:42 -06:00
Gregory Nutt
04b2964eac
drivers/wireless/nrf24l01.c: Review last PR. Also got enthused and did major re-work to file to bring it closer to the NuttX coding style. Fixed a few compile time warnings.
2017-03-10 17:29:58 -06:00
Leif Jakob
5534e0c493
multiple fixes in nrf24l01 driver
...
- signal POLLIN if there is already data in the FIFO
- send ETIMEDOUT to userspace after 2 seconds if TX IRQ was not received
- handle FIFO overflow
- handle invalid pipes/empty FIFO
- multiple cosmetics (missing static, duplicate define, missing \n)
2017-03-10 23:21:49 +01:00
Sebastien Lorquet
7e19f4014e
Merge branch 'master' into ieee
...
Conflicts (fixed):
drivers/wireless/ieee802154/mrf24j40.c
include/nuttx/fs/ioctl.h
2017-03-09 14:28:52 +01:00
Andreas Bihlmaier
c0769c9988
Merged in andreasBihlmaier/nuttx/fix-as5048b (pull request #255 )
...
fix as5048b by adding missing frequency parameter
Approved-by: Gregory Nutt
2017-03-09 12:57:47 +00:00
ahb
e1da80af5b
fix as5048b by adding missing frequency parameter
2017-03-09 12:01:01 +01:00
ahb
164546a65c
increase number of supported PWM channels from 4 to 6
2017-03-09 11:54:37 +01:00
no1wudi
6f4b8c9e60
Merged in no1wudi/nuttx (pull request #241 )
...
fixed the debug method selection of ssd1306
Approved-by: Gregory Nutt
2017-03-07 13:36:26 +00:00
Janne Rosberg
ce2845c5c3
usbhost_cdcacm: fix tx outbuffer overflow and remove now invalid assert
2017-03-07 06:59:00 -06:00
no1wudi
5528b2836c
fixed the debug method selection of ssd1306
2017-03-07 19:49:18 +08:00
Maciej Wójcik
1e6ab4763c
typos
2017-03-05 13:04:07 +00:00
Gregory Nutt
c976a66f8d
net/drivers/skeleton.c: Back out serialization changes of the last commit. They are not necessary in the skeleton.c example because the calls to net_lock() at the beginning of each worker function will enforce serialization.
2017-03-04 11:33:36 -06:00
Gregory Nutt
e2eb5f1ae0
drivers/net: Add framework for serialization in the case where multiple low-priority work queues are used.
2017-03-04 09:45:09 -06:00
Gregory Nutt
a8363528dc
net/phy_notify.c: Call to arch_phy_irq() missing new interrupt argument parameter.
2017-03-03 16:08:21 -06:00
Gregory Nutt
86239d4a73
Experimental change to STM32 Ethernet driver a success. Porting change to all other Ethernet drivers.
2017-03-03 14:45:09 -06:00
Gregory Nutt
f4bad1a280
stm32_gpiosetevent: GPIO IRQ logic no longer returns the xcpt_t oldhandler. This value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 16:34:37 -06:00
Gregory Nutt
f5f9d82d5a
arch_phy_irq: Now returns int instead of xcpt_t oldhandler. The oldhandler is useless after the changes to the interrupt argument. Also access an argument for the PHY interrupt. phy_notify.c driver changed to exploit new interrupt argument passing.
2017-03-02 08:43:33 -06:00
Maciej Wójcik
35b2448203
Merged in w8jcik/nuttx (pull request #232 )
...
some simple typos
Approved-by: Gregory Nutt
2017-03-01 15:25:42 +00:00
Mark Schulte
28226198a7
memlcd: Mark Schulte <mark@mjs.pw>
2017-03-01 08:52:58 -06:00
Maciej Wójcik
4a8aa6ae95
typos
2017-03-01 12:56:15 +01:00
Gregory Nutt
ac6e552ff7
Fixes for coding standard: '*' needs to 'snuggle' with following variable name
2017-02-28 18:37:44 -06:00
Gregory Nutt
ded155c638
Fixes for coding standard: '*' needs to 'snuggle' with following variable name
2017-02-28 18:22:58 -06:00
Gregory Nutt
02b1e1ec1a
Fixes for coding standard: '*' needs to 'snuggle' with following variable name
2017-02-28 18:22:57 -06:00
Gregory Nutt
704df7bd39
IRQ arguments: Fix errors discovered in build testing
2017-02-27 19:28:24 -06:00
Gregory Nutt
67de2e5f66
Add argument to STM32 EXTI interrupt handlers.
2017-02-27 14:21:30 -06:00
Gregory Nutt
69c26cca50
Correct mimatched function prototype.
2017-02-27 12:24:34 -06:00
Gregory Nutt
7bd8da19b9
Missed some changes in the last commit.
2017-02-27 12:11:35 -06:00
Gregory Nutt
840c5935a3
Correct a typo from one of the preceding commits.
2017-02-27 11:58:20 -06:00
Gregory Nutt
a773f9412a
STMPE811 driver needs argument in interrupt handler
2017-02-27 11:41:48 -06:00
Gregory Nutt
b4ff7391f8
Convert more drivers to use use irq_attach with argument.
2017-02-27 10:44:13 -06:00
Gregory Nutt
4cd31be19d
Convert some serial drivers to use use irq_attach.
2017-02-27 08:55:21 -06:00
Gregory Nutt
f15b566254
Button interrupt handler needs argument parameter.
2017-02-27 07:35:34 -06:00
Mark Schulte
b3222bbc8a
irq_dispatch: Add argument pointer to irq_dispatch
...
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
8ee2e8d8b0
Most Ethernet drviers: Check if the poll timer is running before restarting it at the end of each TX.
2017-02-24 15:58:17 -06:00
Maciej Wójcik
29b4b00068
drivers/spi/Kconfig: There is too much SPI in the configuration menu; SPI Driver Support menu is empty
2017-02-23 14:39:13 -06:00
Gregory Nutt
5e09de3703
drivers/tone.c: 50% duty needs to be expressed a a fixed precision number
2017-02-22 06:35:20 -06:00
Gregory Nutt
ae86d7a8c8
Fix mismatched function prototype.
2017-02-21 07:48:00 -06:00
Gregory Nutt
c776407f64
This should resolve issue #30 : Audio Tone Generator and PWM Multiple Output Channel options. I don't actually have a setup to verify it, however.
2017-02-20 17:26:56 -06:00
Gregory Nutt
a92a865be6
TABs instead of spaces in Kconfig
2017-02-20 14:29:56 -06:00
Gregory Nutt
6e32d74b33
Cosmetic changes from review of the last PR
2017-02-19 11:49:42 -06:00
raiden00
82cb38c824
drivers/sensors: Add driver for the ST L3GD20 3 axis gyro
2017-02-19 17:43:44 +01:00
Gregory Nutt
e29b50e00a
Fix recurring naming problem: KXTJ9 vs KXJT9.
2017-02-18 08:08:41 -06:00
David Sidrane
11d1b2e636
Typo mmcsd/mmcsd_sdio.c
2017-02-13 13:24:47 -10:00
Marc Rechté
d501ffc563
Kinetis SDHC driver fixes.
2017-02-09 11:28:30 -06:00
Alan Carvalho de Assis
248d5d3185
MMC/SD SDIO: Some drivers need to start DMA before sending CMD24 and some AFTER
2017-02-09 11:13:05 -06:00
Gregory Nutt
0df1c556dc
drivers/lcd: ssd1306_configspi() must have global scope.
2017-02-09 07:45:25 -06:00
Wolfgang Reißnegger
cfe7c4012e
USBMSC: Always set LUN readonly flag.
2017-02-08 17:17:19 -08:00
Gregory Nutt
9f859774a1
setvbuf: Add support for configuration of line buffering.
2017-02-08 11:28:24 -06:00
Gregory Nutt
764f503150
Remove duplicate setting for SDIO_DMA from drivers/mmcsd/Kconfig
2017-02-06 13:16:52 -06:00
Gregory Nutt
3dbdb3bb31
CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit
2017-01-31 11:52:00 -06:00
Gregory Nutt
2a4791f4ee
Removed dmasupported() method from the SDIO interface. That is now a bit in the cpapability set.
2017-01-31 09:51:15 -06:00
Gregory Nutt
9ac00a355f
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
2017-01-31 09:16:01 -06:00
Gregory Nutt
a70ea9d3bc
Typos withim mtd/ with Macronix MX25L. In NuttX/drivers/mtd/Make.defs letters X between M and 25 are missing. Noted by Oleg Evseev.
2017-01-30 07:26:38 -06:00
Alan Carvalho de Assis
c482437325
MMCSD_SDIO: Only wait for card ejected if card detection is supported
2017-01-26 07:44:17 -06:00
Gregory Nutt
ba2b345990
Remove a few remaining use of the obsolteted 'Compilation Switches' program section
2017-01-22 08:57:18 -06:00
Gregory Nutt
5e0c18b535
Merged in david_s5/nuttx/upstream_2_greg_ramtron (pull request #198 )
...
Adding missing CONFIG_ prefix
2017-01-20 20:48:22 +00:00
David Sidrane
ca895b978b
Adding missing CONFIG_ prefix
2017-01-20 10:45:50 -10:00
Gregory Nutt
08c001196b
drivers/: Remove all explicit use of 'hidden' macro _info. Code must never use this directly. Code must always use a debug macro such as info which is basic on _info but can be appropriately filtered.
2017-01-15 13:00:50 -06:00
Gregory Nutt
2d9668fbd2
Fix a typo in a comment
2017-01-12 16:24:41 -06:00
Aleksandr Vyhovanec
bf528f2071
packed_struct replaced by begin_packed_struct and end_packed_struct
2017-01-09 14:17:49 +03:00
David Sidrane
548108764a
BugFix:uart_ops_s portion of cdcacm will not be initalized with correct functions if CONFIG_SERIAL_DMA is lit.
...
This fixes the issses in a C99 compatible way
2016-12-17 04:29:41 -10:00
Gregory Nutt
4795d58e03
Back out most of 46dbbe837e. The order is correct -- or, rather, the order is the same as the order that response data is provided. Change the order will break all other drivers.
2016-12-15 07:16:24 -06:00
Gregory Nutt
ca92ecafa7
MMC/SD: Format changed from %d to %lu. Must cast argument to unsigned long to avoid crash on 64-bit machine.
2016-12-14 17:44:12 -06:00
Gregory Nutt
f4f32bc740
MMC/SD SDIO (again): This is really an endian-ness issue. Behavior should be different on big- vs little-endian machines.
2016-12-14 17:04:27 -06:00
Alan Carvalho de Assis
3c4a8d05b0
MMC/SD SDIO driver: Change the endianess order to read the return of long response command
2016-12-14 14:17:52 -06:00
Gregory Nutt
f063e4c5ac
Remove Calypso architecture support and support for Calypso SERCOMM driver.
2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b
Remove all Calypso board configurations
2016-12-13 18:24:49 -06:00
Gong Darcy
44b7975a5e
SSD1306: Fix errors in SPI mode configuration
2016-12-04 10:07:46 -06:00
Gregory Nutt
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Gregory Nutt
ad3897531f
C5471 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 12:17:55 -06:00
Gregory Nutt
43459fe75e
DM09x0 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 11:42:15 -06:00
Gregory Nutt
eba1e076ec
PIC32MX/Z Ethernet: Now supports CONFIG_NET_NOINT
2016-12-03 09:50:14 -06:00
Gregory Nutt
bfa1da14e2
LM3S Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 08:32:49 -06:00
Gregory Nutt
c0cbea2550
Remove RGMP and RGMP drivers.
2016-12-02 09:49:33 -06:00
Janne Rosberg
8442bf66b9
usbhost_cdcacm: add CDC_SUBCLASS_ACM and CDC_PROTO_ATM to supported class and proto
2016-11-30 12:20:23 -06:00
Janne Rosberg
4b282f219a
usbhost_composite: fix end offset in usbhost_copyinterface()
2016-11-30 12:18:23 -06:00
Gregory Nutt
96be43b270
drivers/net/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER
2016-11-29 16:44:23 -06:00
Gregory Nutt
1793c1f8e1
Trivial, cosmetic change
2016-11-29 15:03:51 -06:00
Gregory Nutt
9ee3f3b933
sched_note: Permit spinlock and critical section notes in in-memory buffer iff sched_not_get() interfaces is disabled.
2016-11-28 18:36:26 -06:00
Gregory Nutt
d65be718c2
sched_note: Extend OS instrumentation to include some SMP events.
2016-11-27 17:14:57 -06:00
Gregory Nutt
0804286ad3
arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS.
2016-11-19 09:20:01 -06:00
Wolfgang Reißnegger
88539a7497
USBMSC: Fix length of mode6 sense reply packet.
2016-11-18 17:23:21 -08:00
Gregory Nutt
cdbc66addd
Merge branch 'master' of bitbucket.org:nuttx/nuttx
2016-11-18 09:30:40 -06:00
Gregory Nutt
936b55f608
drivers/net: Add option to use low-priority work queue to all drivers in drivers/net. Not yet added to all architecture-specific network drivers.
2016-11-18 09:22:49 -06:00
Gregory Nutt
175ec43628
Merged in slorquet/nuttx/timerfixes (pull request #171 )
...
Timerfixes
2016-11-18 14:45:36 +00:00
Gregory Nutt
52560bba37
ENC28J60: Allow either HP or LP work queue to be used.
2016-11-18 08:41:27 -06:00
Sebastien Lorquet
5363d0619a
Fix warnings
2016-11-18 15:26:08 +01:00
Gregory Nutt
47b52a2633
Fix an error in manually bringing in Sebastien's changes; Update some comments.
2016-11-17 16:15:06 -06:00
Gregory Nutt
9acd57c819
Fix up some naming and update some comments.
2016-11-17 15:50:39 -06:00
