Goden Freemans has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Ivan Petrov Ucherdzhiev has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Petro Karashchenko has submitted the ICLA and we can migrate the licenses
to Apache.
Ivan Petrov Ucherdzhiev has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Neil Hancock has submitted the ICLA and we can migrate the licenses
to Apache.
Mateusz Szafoni has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Max Holtzberg has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Michael Jung has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Mateusz Tomasz Szafoni has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Abdelatif Guettouche has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
lpc17_40_userleds.c: Adds the support of Userleds driver which
provides a device to manipulate the 4 leds of the board through the
/dev/userleds.
lpc17_40_leds.c: Removes not used definitions, eg. MBED_LED3_ON.
Board LED Status support(CONFIG_ARCH_LED=y) and Device Drivers/Led
Support(CONFIG_ARCH_USERLED=y) can not be enable together.
Signed-off-by: Gustavo L F Walbon <gwalbon@linux.ibm.com>
Normally, statically allocated data goes in .bss, followed by the
initial stack, followed by HEAP. However, any data that is statically
allocated in SRAM4 with __attribute__ ((section (".sram4"))) will
clobber, and be clobbered by, the HEAP.
On STM32H7, BDMA can only access SRAM4. Therefore any BDMA buffers (or
any other data) placed in SRAM4 will expose this problem. In one case,
this manifested as a failure of NSH to start, because the SPI6 BDMA
buffers clobbered the /dev/console inode structs, which the OS
allocated earlier.
This PR ensures that only the rest of SRAM4, after any static data, is
added to the heap. This PR also allows SRAM4 to be completely excluded
from the heap by a new Kconfig, CONFIG_STM32H7_SRAM4EXCLUDE, similar
to what CONFIG_STM32H7_DTCMEXCLUDE does for the DTCM region.
Change required in linker scripts:
Every STM32H7 linker script must replace this:
.sram4 :
{
} > sram4
with this:
.sram4_reserve (NOLOAD) :
{
*(.sram4)
. = ALIGN(4);
_sram4_heap_start = ABSOLUTE(.);
} > sram4
or link will fail with: undefined reference to '_sram4_heap_start'.
The Release Notes should document this for users with out-of-tree
boards.
arch/arm/src/stm32h7/Kconfig:
* Add config STM32H7_SRAM4EXCLUDE to allow excluding all of SRAM4
from the HEAP.
arch/arm/src/stm32h7/stm32_allocateheap.c:
* Only when including SRAM4 in the heap, define HAVE_SRAM4,
SRAM4_START, SRAM4_END, and SRAM4_HEAP_START.
* Add "Private Data" section.
* Add extern for_sram4_heap_start, which must be defined in the
board's linker script.
* arm_addregion(): Only add SRAM4 to the heap when configured to
do so, i.e., unless CONFIG_STM32H7_SRAM4EXCLUDE is defined, and
only add the portion of SRAM4 that is past any static data.
boards/arm/stm32h7/nucleo-h743zi/scripts/flash.ld:
boards/arm/stm32h7/nucleo-h743zi/scripts/kernel.space.ld:
boards/arm/stm32h7/nucleo-h743zi2/scripts/flash.ld:
boards/arm/stm32h7/stm32h747i-disco/scripts/flash.ld:
boards/arm/stm32h7/stm32h747i-disco/scripts/kernel.space.ld:
* Update all in-tree STM32H7 board linker scripts as described in
"Change required in linker scripts" above.
Testing:
* Successfully built all of the following configurations:
nucleo-h743zi2:jumbo
nucleo-h743zi2:nsh
nucleo-h743zi:nxlines_oled
nucleo-h743zi:elf
nucleo-h743zi:otg_fs_host
nucleo-h743zi:nsh
nucleo-h743zi:netnsh
nucleo-h743zi:pwm
stm32h747i-disco:nsh
* Tested with custom board.
* nxstyle.
References:
[1] See the dev@nuttx.a.o mailing list discussion started 2021/03/25:
"How to ensure HEAP will not overlap static DMA buffer?"
https://lists.apache.org/thread.html/recf2bb9043f8c9f53c10917e2adb2ec64fe35dc5e6f9a695a7ac6ecc%40%3Cdev.nuttx.apache.org%3E
[2] See arm_addregion() in arch/arm/src/stm32h7/stm32_allocateheap.c
Thanks to Gregory Nutt and David Sidrane for suggestions and reviews.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Several files were missed in the past
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
tcpip ok
update wifi demo configuration
fix tcpip input cause misalign fault
change some api definetions in nuttx
fix wifi manager strlen copy without suffix null character
fix 602 network buf allocation issue
wifi scan works
[ble] Add controller code
[BLE] Add nuttx adapt code for blecontroller .
[BLE] modified include file path, to fix cflag is too long.
[ble]Test ble peripheral pass, save code.
[ble] Organize the code
[BLE] Add blecontroller config for nuttx
[BLE] Add config for ble example
fix tcp lost packet when rx
support wpa3.
Copy default config from wifi default config. Create ble for local test and ble tester for autopts.
Add config for local test.
Add pts teset config for host test
Add config for mesh test
Create task to init blecontroller
Delete blecontroller rx thread.
using idle task to receive hci command from host
Set ble device name to /dev/ble, and fix code.
1.fix a ke schedule risk 2. CFG_HOST is enabled only in the case that CONFIG_BLE_HOST_DISABLE is not enabled, by lanlan
rm _sp_main stack.
change h/l workq_stack_size 6K
change l workq_stack_size 3K.
[ble] delete file_detach
color idle stack.
clear bl602 netdev code
SCAN is sorted according to RSSI
enlarge nsh command line buffer
fixup stack overflow check checkfail when startup
arch/risc-v/BL602:fix reboot cause crash
reboot default use romapi.
riscv/bl602:netdev support defered input, remove wifi_tx function
risc-v/bl602:fix sem_timedwait usage error in bl_cmds
risc-v/bl602:fix memory access out of bounds when copy ssid
remove ble and wifi source, download when build
add bl602 blob gitignore
risc-v/bl602:remove ble-pts defconfig
Fix some typos in NuttX style naming
Fix the replacement of tab to space
fix wlan interface down still receive packet
fix wapi crash, rx when ifdown,and ble_hci_rx_do
change system reset to rom dirver
change ble hci interval to 50ms
NuttX support wifi enable/disable log via KConfig
support country code configuration in Kconfig
fix ap tx not work
