common/arm_backtrace_sp.c: In function 'up_backtrace':
common/arm_backtrace_sp.c:253:15: warning: assignment to 'long unsigned int' from 'uint8_t *' {aka 'unsigned char *'} makes integer from pointer without a cast [-Wint-conversion]
253 | top = g_intstacktop;
|
to fix the following clang warning:
Error: chip/eoss3_irq.c:138:47: error: format specifies type 'unsigned int' but the argument has type 'uint32_t' (aka 'unsigned long') [-Werror,-Wformat]
_err("PANIC!!! Bus fault received: %08x\n", getreg32(NVIC_CFAULTS));
~~~~ ^~~~~~~~~~~~~~~~~~~~~~
%08lx
/github/workspace/sources/nuttx/include/debug.h:126:57: note: expanded from macro '_err'
__arch_syslog(LOG_ERR, EXTRA_FMT format EXTRA_ARG, ##__VA_ARGS__)
~~~~~~ ^~~~~~~~~~~
/github/workspace/sources/nuttx/arch/arm/src/common/arm_internal.h:134:24: note: expanded from macro 'getreg32'
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Error: chip/eoss3_irq.c:146:49: error: format specifies type 'unsigned int' but the argument has type 'uint32_t' (aka 'unsigned long') [-Werror,-Wformat]
_err("PANIC!!! Usage fault received: %08x\n", getreg32(NVIC_CFAULTS));
~~~~ ^~~~~~~~~~~~~~~~~~~~~~
%08lx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
1.Don't check the return value of nxsem_init or nxmutex_init
2.Fix some style issue
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
- Reduce "SPI Flash configuration" menu dependency on SPI Flash driver
just to MTD-related configs.
- Move SPI Flash Mode and Frequency configs to SPI Flash configuration
menu.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Not all boards have an interrupt line from the phy to
the Soc. This commit allows the phy to be polled for
link status.
This may not work on all MAC/PHY combination that
have mutually exclusive link management and operating
modes. The STM32H7 and LAN8742AI do not have such a
limitation.
Fix typos
1. add 'ARM' prefix to choice menu
2. rename 'Generic Clang toolchain' to 'LLVM Clang toolchain'
to avoid confuse with CONFIG_ARM_TOOLCHAIN_ARMCLANG
Signed-off-by: chao an <anchao@xiaomi.com>
armv6-m/arm_exception.S:139:2: error: invalid instruction, any one of the following would fix this:
sub r1, #(4 * (10))
^
armv6-m/arm_exception.S:139:2: note: instruction requires: thumb2
sub r1, #(4 * (10))
^
armv6-m/arm_exception.S:139:10: note: invalid operand for instruction
sub r1, #(4 * (10))
^
armv6-m/arm_exception.S:139:2: note: no flag-preserving variant of this instruction available
sub r1, #(4 * (10))
^
armv6-m/arm_exception.S:139:10: note: operand must be a register in range [r0, r7]
sub r1, #(4 * (10))
^
-----------------------------------------
bringup.c:125:18: warning: variable 'ret' is uninitialized when used here [-Wuninitialized]
return ret;
^~~
bringup.c:73:10: note: initialize the variable 'ret' to silence this warning
int ret;
^
= 0
Signed-off-by: chao an <anchao@xiaomi.com>
chip/flash.c: In function '_spif_read_status_reg_x':
chip/flash.c:46:9: warning: this 'while' clause does not guard... [-Wmisleading-indentation]
46 | while ((AP_SPIF->fcmd &0x02)==0x02); \
| ^~~~~
chip/flash.c:128:3: note: in expansion of macro 'SPIF_STATUS_WAIT_IDLE'
128 | SPIF_STATUS_WAIT_IDLE(SPIF_WAIT_IDLE_CYC);
| ^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
If you specify a file path on SPI-Flash in CONFIG_CXD56_GNSS_CEP_FILENAME,
it causes a deadlock issue in the inter-CPU communication. To resolve it,
introduce a new CONFIG_CXD56_GNSS_CEP_ON_SPIFLASH and then use pre-read
buffers during checking CEP file. So this needs the large of free memory.
Remove hardware zero length packet enhancement because of driver
logic already processed the ZLP correctly. It is unnecessary and cause
of IN interrupt lost.
Add initial support for the I2S peripheral on ESP32S2.
Add I2S character driver and generic I2S audio driver.
Include i2schar defconfig for ESP32-S2-Saola-1 board.
On armv8-m the MPU region limits are inclusive. Thus, we must substract
one byte of size from (base + limit).
Signed-off-by: Michael Jung <michael.jung@secore.ly>
In host route mode (bridge mode disabled), the d_pktsize of TAP device is not initialized and will be set to CONFIG_NET_ETH_PKTSIZE in netdev_register, while the MTU on host side keeps at 1500. Input packets larger than CONFIG_NET_ETH_PKTSIZE will be dropped because 'IP packet shorter than length in IP header'.
This patch fix this issue by reading MTU from host side and set as d_pktsize, just the same as what is done in bridge mode.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When a function is known to preserve eight-byte alignment of the stack, armclang assigns the build
attribute Tag_ABI_align_preserved to that function. However, the armclang integrated assembler does
not automatically assign this attribute to assembly code.
Signed-off-by: xiangdong6 <xiangdong6@xiaomi.com>
When devif_loopback handles a packet (like a ping targeting at this dev), it does not call the txdone callback, breaking the tx pipeline and may left some packets unhandled, delayed until next transmit on the network interface.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Share one worker between multiple simulated network devices may work most of the time, but sometimes breaks the tx pipeline when sending packets on more than one interface at the same time, and leaves some packets unprocessed in network stack, delayed until next transmit on the network interface. The rx process is likely delayed in packet processing under similar situation, so keep g_avail_work and g_recv_work the same number as interfaces.
dev0 tx1 avail tx1 done
v v
work dev0 tx1 -> dev0 tx1 -> empty -> dev1 tx2 -> dev1 tx3 -> empty
^ ^ ^ ^
dev1 tx2 avail (failed to queue) tx3 avail tx2 done tx3 done
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
common/arm_backtrace_fp.c: In function 'up_backtrace':
common/arm_backtrace_fp.c:126:23: warning: assignment to 'void *' from 'uintptr_t' {aka 'unsigned int'} makes pointer from integer without a cast [-Wint-conversion]
126 | istacklimit = arm_intstack_top();
| ^
Signed-off-by: chao an <anchao@xiaomi.com>
This change adds the following:
- Rename the board configuration name from qemu-a53 to qemu-v8a.
- Add the configurations for Cortex-A57 and Cortex-A72.
Signed-off-by: Hidenori Matsubayashi <hidenori.matsubayashi@gmail.com>
Use CONFIG_ARCH_CHIP_QEMU instead of CONFIG_ARCH_CHIP_QEMU_A53. This is because these configurations depend on the hardware configuration of qemu (memory map, irq numbers, etc.).
Signed-off-by: Hidenori Matsubayashi <hidenori.matsubayashi@gmail.com>
Support more than one TAP device for debugging (future) NAT and FORWARD, left WPCAP and VPNKit unchanged (force number to 1).
Although we can support at most 31 interfaces, limit to 8 like CONFIG_TUN_NINTERFACES.
Signed-off-by: wengzhe <wengzhe@xiaomi.com>
1. rename arm_backtrace_thumb.c to arm_backtrace_sp.c
2. use EHABI stack unwinder instead of instruction unwind
Signed-off-by: chao an <anchao@xiaomi.com>
Make a separate config flag for enabling L2 cache. This is on by
default when compiling a standalone/bootloader configuration, but
can also be disabled for special cases, such as memory testing
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This change moves the static vars to the appropriate place to follow the coding standard. It also adds comments as sections and `static` where necessary.
Signed-off-by: Hidenori Matsubayashi <hidenori.matsubayashi@gmail.com>
