Gregory Nutt
|
bb5f545173
|
STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent
|
2014-05-07 12:54:27 -06:00 |
|
Gregory Nutt
|
bf623f4981
|
Nucleo-F401RE: Delay loop calibrated
|
2014-05-06 17:30:44 -06:00 |
|
Gregory Nutt
|
bd7b376e57
|
The Nucleo-F401RE has no on-board cystal and, hence, must use the on-chip HSI oscillator for the PLL include clock
|
2014-05-06 10:01:02 -06:00 |
|
Gregory Nutt
|
370703194e
|
Updated Nucleo-F401RE configuration
|
2014-05-05 13:47:21 -06:00 |
|
Gregory Nutt
|
2dbaed4779
|
The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name
|
2014-05-05 08:52:02 -06:00 |
|
Gregory Nutt
|
99d40a19a3
|
Fix configuration for F401: It has has FSMC and so the option should not be offered. But there are many more options available for the F401 that should be availalbe: CAN, nonexistent timers, etc. These will all need to be addressed
|
2014-04-30 16:12:36 -06:00 |
|
Gregory Nutt
|
a6211ef21d
|
Nucleo-F401RE: Has only one memory region, not two
|
2014-04-30 14:56:39 -06:00 |
|
Gregory Nutt
|
e346b1e8d3
|
Nucleo-F401RE: Fix memory usage
|
2014-04-30 08:20:30 -06:00 |
|
Gregory Nutt
|
55d069360a
|
Nucleo-F401RE: Use standard NuttX LED interfaces
|
2014-04-22 12:55:31 -06:00 |
|
Gregory Nutt
|
2f86e24aec
|
Nucleo-F401RE build issues
|
2014-04-20 14:16:47 -06:00 |
|
Gregory Nutt
|
4993caee65
|
Add support for the STM32F041RE and for the Nucleo-F401RE board. From Frank Bennett
|
2014-04-20 13:42:23 -06:00 |
|