Gregory Nutt
59f3180179
Re-verify ez80 build. Fixes to other ZiLOG architectures broke ez80 again.
2019-06-03 19:04:24 -06:00
Gregory Nutt
622c272ea3
Clean up some variouis compiler problems using SDCC to compiler Z180.
2019-06-03 18:16:23 -06:00
Gregory Nutt
7ab149d8e9
Various fixes to get a clean compile with the SDCC compiler. Compile is 'almost' clean.
2019-06-03 16:53:11 -06:00
Gregory Nutt
fd4436f559
arch/z80/src/Makefile.zdsiil: Minor cleanup
2019-06-03 15:35:36 -06:00
Gregory Nutt
f6b42f87c9
More miscelleanous ZNeo build fixes
2019-06-03 14:45:00 -06:00
Gregory Nutt
a9fd817eeb
More ZNeo compile fixes: include/stdio.h: Another place where misuse of FAR makes a difference. include/nuttx/sched.h: Be consistent in use of WDOG_ID type. ZDS-II doesn't like auto-conversions of struct wdog_s * to WDOG_I (which is type struct wdog_s *).
2019-06-03 13:28:39 -06:00
Gregory Nutt
96da37dc48
include/nuttx/wqueue.h: Allow definitions even if work queues are not enabled. This solves build failures when work queues are not enabled.
2019-06-03 13:13:17 -06:00
Gregory Nutt
84a57f8fa0
Fix several ZNeo compile issues. There are more. Pthreads: Fix a could of places where FAR was added when it is not appropriate. This matters to ZNeo which depends on definitions of NEAR and FAR points.
2019-06-03 13:06:58 -06:00
Gregory Nutt
25f42dd076
libs/libc/time/: Costmetic changes to make gmtime() and gmtimer() follow the coding standard more closely.
2019-06-03 11:18:17 -06:00
Gregory Nutt
2185456690
configs/: Update configurations for changes to apps/netutils/netinit configureation. MAC address configuration was represented by type long long. That is a problem for architectures that do not support typle long long. Replaces by two long configuration items.
2019-06-03 10:05:46 -06:00
Gregory Nutt
ee9e8c6bc2
udp\udp_callback.c: Fix another C89 compatibility problem. Empty initializers are not permitted. Caused ez80 build failure.
2019-06-03 09:23:19 -06:00
Gregory Nutt
2dae0ef0db
mm/mm_heap/mm_sem.c: Fix error that occurs when CONFIG_CPP_HAVE_VARARGS is not defined. In that case, the arguments to the debug macro will all be evaluated even though they are not used any variables that are references must at least be defined.
2019-06-03 09:02:55 -06:00
Gregory Nutt
d375a26a6c
libs/libc/stdio: Fix long long usage in all of the newer printf-related logic: The selection CONFIG_LIBC_LONG_LONG must be ignored if the architecture does not support long long types.
2019-06-03 08:45:57 -06:00
Gregory Nutt
7a0481d2a9
drivers/net/telnet.c: Fix a C89 non-compliance that was breaking the ez80 build.
2019-06-03 08:20:21 -06:00
Gregory Nutt
e4069ebe5e
include/nuttx/signal.h: Fix a C89 compliance problem that cause the ez80 build to fail. Empty structure and unions are not accepted by the compiler.
2019-06-03 08:12:20 -06:00
Dave Marples
a2def2a4d1
arch/arm/src/common/up_lwl_console.c: Add support for a 'Lightweight Link' protocol between a target and debugger for use when you need a console but the target doesn't have a spare serial port or other available resource.
2019-06-03 07:31:17 -06:00
raiden00pl
04ea439121
Merged in raiden00/nuttx_h7 (pull request #880 )
...
Initial PWM support for STM32H7
arch/arm/src/stm32h7: port PWM from STM32
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-03 11:51:00 +00:00
Masayuki Ishikawa
fd387b6b8c
Merged in masayuki2009/nuttx.nuttx/fix_usrsock (pull request #879 )
...
net/usrsock: Fix debug logs and remove DEBUGASSERT from usrsockdev_do_request()
In a client mode, socket() will be the first request for usrsockdev_do_request().
However, in a server mode, the first request to accepted sockets will be recv()
or others which depend on applications. So I think we should remove this
DEBUGASSERT from usrsockdev_do_request().
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-03 11:43:43 +00:00
Gregory Nutt
4a211df02e
Update a README
2019-06-02 19:26:01 -06:00
Gregory Nutt
167ecaa496
arch/z16/src/z16f/Kconfig and configs/z16f2800100zcog/scripts/Make.defs: Add support for the lastest 5.2.1 version of the ZDS-II toolchain.
2019-06-02 19:21:00 -06:00
Gregory Nutt
87fd570d3a
arch/z16/src: Replicate build changes make for ez80 and z8 for zneo.
2019-06-02 18:43:43 -06:00
Gregory Nutt
27bb130bf8
arch/z80/src/: Fix a few more ez80 compile issues. Update README files.
2019-06-02 18:35:32 -06:00
Gregory Nutt
2cf195e6d1
configs: Fix included path used in all arch/z80 XDS-II builds (ez80 and z8).
2019-06-02 16:16:44 -06:00
Gregory Nutt
fc79fc5ce1
arch/z80/src: Fix ez80 compile problems due to New ZDS-II toolchain and ongoing bit rot due to non-C89 code creeping into the core OS.
2019-06-02 15:36:38 -06:00
Jason Harris
6a98b2825e
configs/axoloti: Adds initial support for the Axoloti sound/music synthesizer board. Board is based on STM32F427 SoC. See http://www.axoloti.com/ .
2019-06-02 12:58:56 -06:00
Gregory Nutt
2357446491
include/nuttx/net/bluetooth.h: Ignore content if CONFIG_NET_BLUETOOTH is not set. This is necessary because bt_hci.h content was previously comment out because it uses several compiler specific things include zero-dimensione arrays and uint64_t. Neither are supported by the C89 ZiLOG ZDS-II compiler.
2019-06-02 12:57:18 -06:00
Gregory Nutt
2767e80459
Squashed commit of the following:
...
ez80: Fixing a few more compile problems. I am afraid that the 5.3.0 compiler it too buggy to use.
ez80: Additional build-related fixed.
eZ80: Updating to use the newest ZDSII 5.3.0 toolchain.
2019-06-02 11:05:31 -06:00
Gregory Nutt
396552ac4c
configs/lpcxpresso-lpc54628: Enable DATE command in twm4nx1 and twm4nx2 configurations.
2019-06-01 14:10:04 -06:00
Mateusz Szafoni
dffed7ab51
arch/arm/src/stm32f0l0g0/stm32g0_rcc.c: Fixes some problems found in build testing.
2019-05-31 09:22:07 -06:00
rajan gill
0ceac9a969
arch/arm/src/stm32/stm32_adc.c: The attached patch fixes a compilation error when verbose analog debugging is enabled for the stm32 adc: not all stm32s have an SQR4 register.
2019-05-31 08:50:38 -06:00
Dave Marples
d518cbb170
arch/arm/src/stm32/Kconfig: Add MEDIUM_DENSITY selection.
2019-05-31 07:55:43 -06:00
Jussi Kivilinna
ddcc6dd501
drivers/usbmisc/fusb303.c: Toggle enable bit off/on after detaching
2019-05-31 07:40:06 -06:00
Valmantas Paliksa
d3cedfb823
net/tcp/tcp_send_buffered.c: Fix deadlock in iob_copyin when iob buffers are exhausted and network lock is taken.
2019-05-31 07:29:17 -06:00
Gregory Nutt
aa18720d14
Upate a README
2019-05-31 07:27:15 -06:00
Gregory Nutt
491520350a
Fix a spelling error that was cloned in many files.
2019-05-31 07:24:19 -06:00
Juha Niskanen
c77e016ee8
arch/arm/src/stm32l4, drivers/sensors/t67xx.c: Fix trivial build failures caused by recent commits
2019-05-31 07:22:02 -06:00
Jussi Kivilinna
591d0e7471
arch/arm/src/stm32l4/: Fix USB device PMA accesses. USB PMA accesses are done as 16-bit words on STM32L4 instead of 32-bit words on STM32L1.
2019-05-31 07:21:42 -06:00
Jussi Kivilinna
73c1658535
arch/arm/src/stm32l4/stm32l4_pwr.c: Enable PWR peripheral for setting USV
2019-05-31 07:21:24 -06:00
Jussi Kivilinna
4bcd1806f0
arch/arm/src/stm32l4/stm32l4_hsi48.c: Enable CRS_CR_CEN with CRS_CR_AUTOTRIMEN
2019-05-31 07:20:49 -06:00
Dave Marples
30620dfeb6
arch/arm/src/imxrt/imxrt_lowputc.c: Add changes omitted from 173897afb9
2019-05-30 17:22:18 -06:00
Gregory Nutt
2eb4fe5ffb
Make sure sections are aligned to 32-bits in all LD linker scripts. This fixes and issues noted specifically for the SAMD21 by Bernd Walter, but should be applicable to all other LD scripts as well.
...
Squashed commit of the following:
configs/: Add . = ALIGN(4); before every .data section
configs/: Add . = ALIGN(4); before every ARM.extab section
configs/: Add . = ALIGN(4); before every definition of __exidx_start
configs/: Add . = ALIGN(4); before every .init_section.
configs/: Convert TABs to spaces in all ld linker scripts. This just makes things easier to modify with scripts because the files are more consistent.
2019-05-30 16:51:38 -06:00
Dave Marples
173897afb9
This commit implements RS485 RX/TX switching and RTS/CTS flow control for the IMXRT family. It has been tested on 1020 but I don't see any reason for issues on any other family member.
2019-05-30 13:45:36 -06:00
raiden00pl
64feadfc21
Merged in raiden00/nuttx_lora/g0_port (pull request #878 )
...
arch/stm32g0, configs/nucleo-g071rb: the basic NSH configuration is now functional
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-05-30 11:44:10 +00:00
Juha Niskanen
c9ecd548e0
configs/stm32l4r9ai-disco: Add ksh config, some updates for I2C, SPI and DFSDM support.
2019-05-28 09:31:36 -06:00
Juha Niskanen
7214f8ae76
arch/arm/src/stm32l4/stm32l4_i2c.c: Add support for 16 and 120 MHz timings, board can use HSI16 clock for I2C
2019-05-28 09:23:40 -06:00
Juha Niskanen
fac5cc77b0
arch/arm/src/stm32l4/stm32l4xrxx_rcc.c: Use Range 1 Boost mode if SYSCLK is higher than 80 MHz
2019-05-28 09:14:08 -06:00
raiden00pl
f4caf4b3ec
Merged in raiden00/nuttx_pe (pull request #877 )
...
Improvements for STM32 PWM
arch/arm/src/stm32/stm32_pwm: add support for all PWM modes
arch/arm/src/stm32/stm32_pwm: add interface to change PWM mode
arch/arm/src/stm32/stm32_pwm: refactor pwm_mode_configure()
arch/arm/src/stm32/stm32_pwm: STM32_PWM_CHANx corresponds to the timer channel and STM32_PWM_OUTx corresponds to the timer channel output
arch/arm/src/stm32/stm32_pwm: add CHAN5 and CHAN6 to PWM_TIMx_NCHANNELS
arch/arm/src/stm32/stm32_pwm: calculate the PWM_TIMx_NCHANNELS if CONFIG_STM32_PWM_MULTICHAN is selected
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-05-28 15:07:43 +00:00
Jason Harris
cc2d97f942
arch/arm/src/stm32/stm32_fsmc.h: Fix the include file guarding name in stm32/stm32_fsmc.h.
2019-05-27 11:15:37 -06:00
Gregory Nutt
3ec7c17c16
arch/arm/src/stm32f7: Fix another error related to chip/->hardware/ name change.
2019-05-27 10:41:44 -06:00
Gregory Nutt
e74aedb046
Fix errors found in build testing.
2019-05-27 09:21:18 -06:00