Gregory Nutt
|
4b824e8d5f
|
SAM4E: Add support for PIO and peripheral clocks
|
2014-02-21 12:34:04 -06:00 |
|
Gregory Nutt
|
74b4b1f054
|
SAM4E: Add memory map header file
|
2014-02-21 09:33:16 -06:00 |
|
Gregory Nutt
|
0a6942e068
|
SAM4E: Add vector definition header files
|
2014-02-21 08:46:16 -06:00 |
|
Gregory Nutt
|
bebb5d8c4d
|
unlink/rm can now be used on nodes in the pseudo-filesystem. There is new configuration option to suppress these costly and mostly useless operations on the pseudo-filesystem
|
2014-02-20 18:14:02 -06:00 |
|
Gregory Nutt
|
33508df77f
|
SAMD20: Some progress debugging SPI. Currently hangs
|
2014-02-20 15:20:42 -06:00 |
|
Gregory Nutt
|
8f469d70ed
|
SAMD20: Changes for clean build of SPI driver and SAMD20 Xplained Pro board with the I/O1 module installed
|
2014-02-20 11:27:59 -06:00 |
|
Gregory Nutt
|
8bbf4f3ec8
|
SAMD20: SPI driver is code-complete, but untested
|
2014-02-20 09:59:54 -06:00 |
|
Gregory Nutt
|
41afd1c3d8
|
SAMD: A little more SPI logic
|
2014-02-19 18:48:59 -06:00 |
|
Gregory Nutt
|
951f4ff4a3
|
LM3/4: Several errors were unmasked with UARTs > UART2 were enabled. Fromo Gosha
|
2014-02-19 17:02:30 -06:00 |
|
Gregory Nutt
|
ff899bf0e3
|
SAMD20: Add a framework for an SPI driver
|
2014-02-19 16:52:12 -06:00 |
|
Gregory Nutt
|
916308efc1
|
SAMD20: Move some common SERCOM logic to a separate file where it can be shared
|
2014-02-19 14:47:04 -06:00 |
|
Gregory Nutt
|
662622b5dc
|
STM32 Timer: Set CCMR wehn selecting timer channel. From David Sidrane
|
2014-02-18 13:50:46 -06:00 |
|
Gregory Nutt
|
bbb65432d9
|
STM32 SPI: Disable SPI before modifying CR1
|
2014-02-18 13:42:20 -06:00 |
|
Gregory Nutt
|
06e7e5dfa1
|
More STM32F429 Discovery FPU-related changes from David Alessio
|
2014-02-18 12:07:17 -06:00 |
|
Gregory Nutt
|
1fcd2bfd10
|
SAMD20: Increase FLASH waitstates to 2
|
2014-02-18 10:37:42 -06:00 |
|
Gregory Nutt
|
7bcf29c72a
|
Mostly cosmetic clean-up of comments
|
2014-02-17 19:22:53 -06:00 |
|
Gregory Nutt
|
246b949610
|
SAMD20: Fix BAUD calculation. Now comes up okay about 20% of the time
|
2014-02-17 18:09:17 -06:00 |
|
Gregory Nutt
|
0fd29be0d2
|
SAMD20: Now runs, but no serial output
|
2014-02-17 14:21:22 -06:00 |
|
Gregory Nutt
|
93ca836b85
|
SAMD20: Initial debug changes to get clocking
|
2014-02-17 11:36:52 -06:00 |
|
Gregory Nutt
|
05b5d78ae1
|
SAMD20: Misc changes for a clean build with debug enabled
|
2014-02-17 08:14:19 -06:00 |
|
Gregory Nutt
|
72e823a498
|
SAMD20: Add WDT and EVSYS register definition header files
|
2014-02-16 17:21:36 -06:00 |
|
Gregory Nutt
|
46ae018692
|
SAMD20: Add I2C slave register definition header file
|
2014-02-16 14:44:03 -06:00 |
|
Gregory Nutt
|
3c00c4f3fb
|
SAM20D: Add SPI and I2C master register definition header files
|
2014-02-16 13:07:31 -06:00 |
|
Gregory Nutt
|
b3f4814e9f
|
SAMD20: The basic port is complete but still untested
|
2014-02-16 11:34:32 -06:00 |
|
Gregory Nutt
|
cb6bf52939
|
SAMD20: Completes low-level USART logic
|
2014-02-16 09:42:29 -06:00 |
|
Gregory Nutt
|
1f9d3b67ff
|
SAMD20: More SERCOM USART configuration logic
|
2014-02-15 17:53:55 -06:00 |
|
Gregory Nutt
|
3b0e6526a1
|
SAMD20: A little more USART logic
|
2014-02-15 15:58:48 -06:00 |
|
Gregory Nutt
|
de8f9e979c
|
SAMD20: Beginning of SERCOM UART configuration logic
|
2014-02-15 14:22:56 -06:00 |
|
Gregory Nutt
|
7304c246d1
|
SAM D20: Add SERCOM USART register definition header file
|
2014-02-15 11:37:09 -06:00 |
|
Gregory Nutt
|
5caa92f463
|
SAMD20: Finishes basic clock configuration logic
|
2014-02-15 10:18:05 -06:00 |
|
Gregory Nutt
|
1ed6677f57
|
SAM D20: More clock configuration logic (still incomplete)
|
2014-02-14 16:46:21 -06:00 |
|
Gregory Nutt
|
293484ffed
|
SAM D20: Put fuse related definition in a separate header file so make license statement cleaner
|
2014-02-14 14:33:34 -06:00 |
|
Gregory Nutt
|
294152fe36
|
SAM D20: A little more clock configuration logic (still incomplete)
|
2014-02-14 13:38:56 -06:00 |
|
Gregory Nutt
|
e98ef18df1
|
SAMD20: Add NVMCTRL register definition header file. Also empty framework for clock configuration
|
2014-02-14 11:03:22 -06:00 |
|
Gregory Nutt
|
8acdc31a6e
|
STM32 serial: Fix clone typo.. FLOWCONROL vs FLOWCONTROL
|
2014-02-14 09:09:56 -06:00 |
|
Gregory Nutt
|
c0c22040b0
|
SAMD20: Add SYSCTRL register definition header file
|
2014-02-13 15:41:16 -06:00 |
|
Gregory Nutt
|
4c2b18dee0
|
SAMD20: Add GCLK and PM register definition header files
|
2014-02-13 14:07:58 -06:00 |
|
Gregory Nutt
|
69ffc4a351
|
SAMD20: Add port configuration logic
|
2014-02-13 12:44:22 -06:00 |
|
Gregory Nutt
|
12e96b8f51
|
Add SAMD20 pin configuration definitions
|
2014-02-13 10:56:15 -06:00 |
|
Gregory Nutt
|
1364850552
|
Minimal changes to get a clean compilation of the SAMD20 Xplained configuration. Still a lot of missing logic
|
2014-02-13 09:14:03 -06:00 |
|
Gregory Nutt
|
1bd5ff87c4
|
Fix-up some SAMD20 SERCOM conditionals
|
2014-02-12 18:29:23 -06:00 |
|
Gregory Nutt
|
bd15ec2565
|
Add initial support for the Atmel SAMD20 Xplained Pro board
|
2014-02-12 17:50:58 -06:00 |
|
Gregory Nutt
|
ca9a8e5875
|
Add basic framework to support the Atmel SAMD Cortex-M+ chip
|
2014-02-12 15:07:11 -06:00 |
|
Gregory Nutt
|
6b4796fa5a
|
Fix typo cloned to many files: SAM32 vs SAM34
|
2014-02-12 13:00:24 -06:00 |
|
Gregory Nutt
|
b656602055
|
More changes to reduce complaints from CppCheck. Some latent bugs fixes, but probably some new typos introduced
|
2014-02-10 19:11:56 -06:00 |
|
Gregory Nutt
|
91b002a043
|
Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced
|
2014-02-10 18:08:49 -06:00 |
|
Gregory Nutt
|
2b40128148
|
USB HID mouse: Fixes the basic data transfer model. Returned position data is still bad
|
2014-02-09 16:50:09 -06:00 |
|
Gregory Nutt
|
2d91804642
|
LPC17 USB Host: Fix a compile error when USB debug is enabled
|
2014-02-09 15:54:58 -06:00 |
|
Gregory Nutt
|
9d8ecdbefd
|
Fix a compile error that crept into the LPC17xx USB host driver
|
2014-02-09 13:45:18 -06:00 |
|
Gregory Nutt
|
cde8e80302
|
A10 had the same cut'n'paste error as did the LM4F
|
2014-02-03 17:22:47 -06:00 |
|
Gregory Nutt
|
ef899c5115
|
Fix cut'n'paster errors in conditional compilation. Prevented LM4F120 Launchpad UARTs 2-7 from being used
|
2014-02-03 17:00:05 -06:00 |
|
Gregory Nutt
|
e5bb99bfb9
|
A10: Make sure it is tolerant of CONFIG_BOOT_SDRAM_DATA
|
2014-01-29 08:16:02 -06:00 |
|
Gregory Nutt
|
764ba4da70
|
SAMA5: Fix logic for running with data in SDRAM
|
2014-01-29 07:49:23 -06:00 |
|
Gregory Nutt
|
3ddb0ebaef
|
ARMv7-A: Conditionally compile out more unneeded logic when .data and .bss are in SDRAM
|
2014-01-28 16:39:08 -06:00 |
|
Gregory Nutt
|
72ee80b7cc
|
SAMA5: Mostly cosmetic
|
2014-01-28 15:54:03 -06:00 |
|
Gregory Nutt
|
6188eb7472
|
SAMA5: More variables-in-SDRAM stuff
|
2014-01-28 15:05:19 -06:00 |
|
Gregory Nutt
|
34b94de8fe
|
Add support for .data and .bss in SDRAM
|
2014-01-28 14:35:03 -06:00 |
|
Gregory Nutt
|
9f46dac1e2
|
Add option to indicatet that data is retained in SDRAM
|
2014-01-28 10:42:49 -06:00 |
|
Gregory Nutt
|
73d340e0bd
|
Remove EFM32 from build system
|
2014-01-27 10:41:06 -06:00 |
|
Gregory Nutt
|
3b172e5f41
|
Remove support for EFM32. Not ready to be fielded
|
2014-01-27 08:03:39 -06:00 |
|
Gregory Nutt
|
2f837ccd2a
|
rename up_led*() functions to board_led_*()
|
2014-01-24 14:28:49 -06:00 |
|
Gregory Nutt
|
f3f5378acc
|
The optimization level can now be selected as part of the configuration
|
2014-01-24 07:45:35 -06:00 |
|
Gregory Nutt
|
e4142f65fb
|
Assembler changes with the gcc-47 distribution from ARM mean that we need to be explicit about branch one or more of the wide branch opcodes results in bad table branching. From Mike Smith
|
2014-01-23 15:29:57 -06:00 |
|
Gregory Nutt
|
7077d99f2f
|
Basic support for the EFM32 processor family from Richar Cochran
|
2014-01-23 07:56:10 -06:00 |
|
Gregory Nutt
|
7ce90ef7e2
|
arch/arm/src/Makefile: dependency directory list is now computed from the VPATH. From Richard Cochran
|
2014-01-23 07:41:00 -06:00 |
|
Gregory Nutt
|
7834ff4ce3
|
Fix error in last ARMv7-M up_disable_irq checkin
|
2014-01-15 15:26:32 -06:00 |
|
Gregory Nutt
|
be474523c4
|
Fix all Cortex-M3/4 implementations of up_disable_irq(). They were doing nothing. Thanks to Manuel Stühn for the tip.
|
2014-01-15 09:56:30 -06:00 |
|
Gregory Nutt
|
836057e340
|
Individual IRQs are not longer disabled on each interrupt. See ChangeLog for detailed explanation
|
2014-01-15 08:09:19 -06:00 |
|
Gregory Nutt
|
803cdfdaf1
|
Changes to get PX4 config to build. Also some warning removal
|
2014-01-14 13:30:22 -06:00 |
|
Gregory Nutt
|
b301471adb
|
A10: Serial clock is OSC24M. From Alan Carvalho de Assis
|
2014-01-10 15:32:42 -06:00 |
|
Gregory Nutt
|
a6bb107d10
|
Fix types in conditional compilation
|
2014-01-10 13:36:18 -06:00 |
|
Gregory Nutt
|
37f0db6e0c
|
Add support for the XPT2046 touchscreen controller on the Viewtool LCD module
|
2014-01-09 10:57:17 -06:00 |
|
Gregory Nutt
|
c31f2b6f78
|
Fix STM32F103VE SPI3 definitions; Fix bug introduced in recent NX reorganization. From Steve Redler IV
|
2014-01-08 16:44:11 -06:00 |
|
Gregory Nutt
|
a6d486557b
|
Cosmetic spaces to tabs change
|
2013-12-08 10:38:33 -06:00 |
|
Gregory Nutt
|
7cbb001f98
|
A10: Fix serial TX interrupts
|
2013-12-08 09:26:53 -06:00 |
|
Gregory Nutt
|
764e117965
|
A10: Correct handling of the serial busy interrupt
|
2013-12-08 08:51:19 -06:00 |
|
Gregory Nutt
|
126bec4e55
|
Add more nops after enabling MMU for Cortex-A8
|
2014-01-07 08:38:00 -06:00 |
|
Gregory Nutt
|
9d393e167c
|
A10: Handle UART BUSY interrupt; Back out change to mkconfig.c -- it causes problems for assembly
|
2013-12-07 11:46:08 -06:00 |
|
Gregory Nutt
|
aa1700895e
|
A10: Add missing interrupt handling logic for UART4-7 and remove bogus flow control logic
|
2014-01-06 12:08:32 -06:00 |
|
Gregory Nutt
|
6a9c63aa09
|
A10: Fix error in IRQ dispatch; vector table seems to be offset by 64 bytes?
|
2013-12-07 08:36:30 -06:00 |
|
Gregory Nutt
|
bb92016356
|
SVC is the preferred mnemonic vs. SWI for cortex A
|
2014-01-05 16:21:41 -06:00 |
|
Gregory Nutt
|
ab729802be
|
Oops. Mnemonic changed from SWI to SVC in cortex A
|
2014-01-05 15:59:49 -06:00 |
|
Gregory Nutt
|
8bc6125b3c
|
Add ARMv7-A syscall.h header file
|
2014-01-05 15:49:06 -06:00 |
|
Gregory Nutt
|
458465c8ed
|
Viewtools STM32F103: Add SSD1289 LCD support
|
2014-01-05 14:14:59 -06:00 |
|
Gregory Nutt
|
c01e95584c
|
STM32: Single wire UART support from Thomas Grubler
|
2014-01-02 07:56:46 -06:00 |
|
Gregory Nutt
|
bca90d1c28
|
STM3240G-EVAL knxwm: Work around CodeSourcery library bug by switching to buildroot
|
2013-12-31 10:55:46 -06:00 |
|
Gregory Nutt
|
2507017695
|
Decoupling NX user interfaces to support NX kernel build (phase 1)
|
2013-12-27 13:18:20 -06:00 |
|
Gregory Nutt
|
64bb8b3341
|
Fix naming of STM32 F3 SPI2 MOSI and MISO pins. From Brian Webb
|
2013-12-27 11:15:18 -06:00 |
|
Gregory Nutt
|
bee251006b
|
STM32F107 OTG FS clock presecaler cannot be configurated after the USB clock is enabled
|
2013-12-26 10:45:21 -06:00 |
|
Gregory Nutt
|
4922f71703
|
Add support for STM32F107 OTG FS (doesn't work) and update USB support for Viewtools STM32F107~
|
2013-12-26 09:22:37 -06:00 |
|
Gregory Nutt
|
e963a4d862
|
F103VC, F105, and F107: Fix configuration and building of USB. configs/viewtools-stm32f107: Fix build for F103 and F107: F103 has USB device; F107 has OTGFS
|
2013-12-25 18:34:15 -06:00 |
|
Gregory Nutt
|
1c61bb0c53
|
Fix a duplicate label introduce in recent commit
|
2013-12-23 14:29:25 -06:00 |
|
Gregory Nutt
|
76b04f137f
|
Need to protect state on stack to do nested interrupt handling
|
2013-12-23 14:11:32 -06:00 |
|
Gregory Nutt
|
d41bfe4d5b
|
Fixes a few more high priority, nested interrupt logic
|
2013-12-23 11:13:56 -06:00 |
|
Gregory Nutt
|
22e208dbf9
|
Several fixes related to Cortex-M RAM vectors
|
2013-12-22 18:19:08 -06:00 |
|
Gregory Nutt
|
88faa55ac1
|
Fix some missing parameters in macros
|
2013-12-22 16:29:36 -06:00 |
|
Gregory Nutt
|
483a4d8d2b
|
Finish the high priority, nested interrupt handler test (does not work)
|
2013-12-22 13:23:57 -06:00 |
|
Gregory Nutt
|
facf988cb2
|
Add logic to configure interrupt controller debug; Fix high priority, nested interrupt build problems
|
2013-12-22 11:16:29 -06:00 |
|
Gregory Nutt
|
5f89b91ad1
|
Finishes coding of ARMv7-M high priority nested interrupt logic. Still undocumented; still not fully tested
|
2013-12-21 15:05:48 -06:00 |
|
Gregory Nutt
|
7bcfcb2544
|
Beginning of high priority nested interrupt support for the ARMv7-M family
|
2013-12-21 11:03:38 -06:00 |
|
Gregory Nutt
|
49f73c04ae
|
Fix a typo that was cloned to several SAMA5 and MTD files
|
2013-12-21 09:45:27 -06:00 |
|
Gregory Nutt
|
1e7365eea4
|
Cosmetic: Changlog and update to comments
|
2013-12-20 16:24:22 -06:00 |
|
Gregory Nutt
|
67b5785d58
|
Kconfigs: Interrupt prioritization should not be automatically selected
|
2013-12-20 08:42:54 -06:00 |
|
Gregory Nutt
|
ed56d3aa83
|
Replace explicit hex MMU value with definition
|
2013-12-18 12:47:43 -06:00 |
|
Gregory Nutt
|
e9d7ab1ba3
|
A10: Extend register debug logic
|
2013-12-18 11:26:48 -06:00 |
|
Gregory Nutt
|
447e79dccc
|
Fix bad register name in INTC debug function
|
2013-12-18 10:14:12 -06:00 |
|
Gregory Nutt
|
e23dcc6384
|
Cortex-A: Fix start-up cache invalidation logi
|
2013-12-18 09:01:43 -06:00 |
|
Gregory Nutt
|
d67eeb1f8a
|
A10: Make sure that interrupts are disabled and cleared
|
2013-11-17 11:40:58 -06:00 |
|
Gregory Nutt
|
a542164b1d
|
Page lies in SRAM A2 not A1
|
2013-11-17 10:37:10 -06:00 |
|
Gregory Nutt
|
fa3593a2c5
|
Remove executable mode bits
|
2013-11-17 08:27:11 -06:00 |
|
Gregory Nutt
|
d46dd5f8e2
|
A10: Fix DDR mapping
|
2013-12-17 09:22:27 -06:00 |
|
Gregory Nutt
|
1771b69b62
|
Cosmetic changes to comments and README files
|
2013-12-16 13:48:20 -06:00 |
|
Gregory Nutt
|
cbe5751c3b
|
Trivial updates to comments and README files
|
2013-12-16 11:13:55 -06:00 |
|
Gregory Nutt
|
96918171ee
|
Review Cortex-A9 CP15 registers and update register definitions
|
2013-12-16 10:23:29 -06:00 |
|
Gregory Nutt
|
93914d8686
|
Back port some A10 changes into the SAMA5 memory map definitions
|
2013-12-16 09:21:55 -06:00 |
|
Gregory Nutt
|
c4380b5a8f
|
ARMv7-A: If the page table does not like in same address range as .text and primary RAM, then we will need to set up an additional mapping for the page table at boot time.
|
2013-12-16 08:26:07 -06:00 |
|
Gregory Nutt
|
9f01df47ea
|
Create procfs_utils.c; File missed from last commit; + remove warning from mm_memalign.c (how did this work before?)
|
2013-12-14 08:53:23 -06:00 |
|
Gregory Nutt
|
623229057f
|
A10 serial driver (still needs some work). From Alan Carvalho de Assis
|
2013-12-13 16:41:44 -06:00 |
|
Gregory Nutt
|
c5f56cb39b
|
Eliminate some warnings in the pcDuino A10 build
|
2013-12-13 13:09:45 -06:00 |
|
Gregory Nutt
|
756fd631ca
|
A10: Add A10 configuration header file
|
2013-12-13 12:53:33 -06:00 |
|
Gregory Nutt
|
d6b81cc7ef
|
A10: Timer interrupt handler
|
2013-12-13 12:42:26 -06:00 |
|
Gregory Nutt
|
124bd68c6f
|
Finish A10 Timer register definitions
|
2013-12-13 11:44:52 -06:00 |
|
Gregory Nutt
|
c0367fcc0a
|
Beginning of Timer register definition file for the A10
|
2013-12-12 12:27:30 -06:00 |
|
Gregory Nutt
|
1f097aa856
|
A10/pcDuino/Linux build fixes
|
2013-12-11 17:05:08 -06:00 |
|
Gregory Nutt
|
70a8510fb9
|
A10: Re-vamp pin configuratin header file
|
2013-12-11 14:40:52 -06:00 |
|
Gregory Nutt
|
482d94cfd2
|
A10+pcDuino: PIO support, LED and button support
|
2013-12-11 13:23:40 -06:00 |
|
Gregory Nutt
|
06f08899dc
|
A10 PIO register definition header file
|
2013-12-10 15:53:32 -06:00 |
|
Gregory Nutt
|
e282aad903
|
Move include/nuttx/fb.h to include/nuttx/video/fb.h
|
2013-12-10 09:23:54 -06:00 |
|
Gregory Nutt
|
bdfb2f7eb6
|
More OV2640 initialization logic
|
2013-12-10 09:10:39 -06:00 |
|
Gregory Nutt
|
ae10aea36c
|
A10 peripheral selection logic
|
2013-12-09 15:24:54 -06:00 |
|
Gregory Nutt
|
59d5c8151d
|
A little SAMA5 camera stuff
|
2013-12-09 14:20:11 -06:00 |
|
Gregory Nutt
|
0297ed0966
|
A10 UART: Register definition header file
|
2013-12-09 14:18:32 -06:00 |
|
Gregory Nutt
|
4d07c15932
|
Add OV2640 camera support to test the SAMA5 ISI peripheral
|
2013-12-09 10:51:22 -06:00 |
|
Gregory Nutt
|
227cddccfa
|
A10: Re-write of interrupt management logic
|
2013-12-09 07:47:15 -06:00 |
|
Gregory Nutt
|
0e54839bf7
|
Add A10 interrupt numbers
|
2013-12-08 11:49:39 -06:00 |
|
Gregory Nutt
|
4a3629180e
|
A10 interrupt logic
|
2013-12-08 10:18:28 -06:00 |
|
Gregory Nutt
|
c661c4014f
|
A10 mmu configuration and INTC register definitions
|
2013-12-08 09:11:52 -06:00 |
|
Gregory Nutt
|
ae044a485c
|
pcDuino: More changes to get the code fragments that are in place building successfully
|
2013-12-07 16:44:23 -06:00 |
|
Gregory Nutt
|
22fefb59da
|
Add board support infrastructure for the pcDuino board. There is not much there on the initial checkin
|
2013-12-07 14:25:35 -06:00 |
|
Gregory Nutt
|
05759e0721
|
Add basic directory structure to support the Allwinner A10
|
2013-12-07 13:06:34 -06:00 |
|
Gregory Nutt
|
7b6b2bbd7c
|
Minor updates to comments and README files
|
2013-12-07 07:00:48 -06:00 |
|
Gregory Nutt
|
9afdaa6744
|
SAMA5 NAND: Fix some DMA-related issues
|
2013-12-06 13:04:15 -06:00 |
|
Gregory Nutt
|
08e027b42f
|
SAMA5 NAND: bugfixes
|
2013-12-06 11:34:29 -06:00 |
|
Gregory Nutt
|
6157214f4c
|
SAMA5 NAND: Fix several bugs associated with PMECC data transfers
|
2013-12-05 18:20:32 -06:00 |
|
Gregory Nutt
|
692b087d07
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
Gregory Nutt
|
422b225401
|
Cosmetic updates to comments and READMEs
|
2013-12-04 16:41:45 -06:00 |
|
Gregory Nutt
|
698baf9baa
|
LPC31 EHCI: Fix errors in DEBUGASSERT statements
|
2013-12-04 14:29:24 -06:00 |
|
Gregory Nutt
|
adc0b36c8f
|
SAMA5 NAND: PMECC logic was reading past the end of the user buffer
|
2013-12-04 13:14:26 -06:00 |
|
Gregory Nutt
|
ae01f868b2
|
SAMA5 NAND: Fix some PMECC setup logic
|
2013-12-04 11:56:56 -06:00 |
|
Gregory Nutt
|
13010883eb
|
SAMA5 NAND: Do not perform DMA on small transfers
|
2013-12-04 07:41:29 -06:00 |
|