sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3,696 Commits 1 Branch 0 Tags 291 MiB
1384148415
Commit Graph

3696 Commits

Author SHA1 Message Date
Gregory Nutt
9f9f790d0a SAM3/4 T/C driver updated to get closer to coding standard 2014-04-22 09:10:32 -06:00
Gregory Nutt
75f64beb80 Various SAM4S related fixes, mostely related to the timer driver driver and the SAM4S timer/counter. All from Bob Doisin 2014-04-22 09:01:20 -06:00
Gregory Nutt
d09c57eade examples/serialrx added by Bob Doison 2014-04-22 08:40:48 -06:00
Gregory Nutt
13292c70c2 Misc SAM4S-related changes from Bob Doison 2014-04-21 19:32:15 -06:00
Gregory Nutt
f52ff8cf7b SAM3/4: Add watchdog timer support. From Bob Doisin 2014-04-21 19:10:06 -06:00
Gregory Nutt
5eadd8df7a SAM3/4: Support for PDC based HSMCI ADMA from Bob Doiron 2014-04-21 17:18:30 -06:00
Gregory Nutt
b0f4941c77 SAM4S: Fix error in macro that disabled peripheral clocking. From Bob Doiron 2014-04-21 17:06:01 -06:00
Gregory Nutt
d16ea614e9 SAM3/4 RTC driver from Bob Doiron 2014-04-21 17:04:22 -06:00
Gregory Nutt
44e7688151 SAM3/4 RTC driver from Bob Doiron 2014-04-21 17:03:57 -06:00
Gregory Nutt
162662a290 Add support for the STM32F041RE and for the Nucleo-F401RE board. From Frank Bennett 2014-04-20 13:42:23 -06:00
Gregory Nutt
235de5c573 ST32: Make selection of SDIO interrupt priority essentially impossible 2014-04-19 08:05:49 -06:00
Gregory Nutt
c575c00147 LPC17xx: Prioritized interrupts are not supported (although hooks are present to prioritize interrupts). Make LPC17 Ethernet default priority to be the system default, not the highest. If the unsupported feature is enabled, then at least it should do no harm 2014-04-19 07:56:59 -06:00
Gregory Nutt
a1b862580b Fix an error introduced in the last commit 2014-04-19 07:54:52 -06:00
Gregory Nutt
6f26d834b6 LPC17xx, TIVA, and Kinetis interrupt initialization: use the NVIC ICTR register to determine how many interrupt lines/registers are supported by the MCU 2014-04-17 14:51:53 -06:00
Gregory Nutt
99639f2d48 SAM3/4 Interrupt initialization. Default interrupt priority not being set correctly 2014-04-17 14:02:22 -06:00
Gregory Nutt
a61c58d50a STM32 OTGFS Host: If OTGFS_HCCHAR_ODDFRM is not goint to be set, then it should be cleared 2014-04-17 11:16:58 -06:00
Gregory Nutt
6492446ac8 STM32 OTGFS Host: Changes from Leo for low-speed devices and interrupt endpoints 2014-04-17 10:52:27 -06:00
Gregory Nutt
0954437084 SAMA5 EMAC: Missing right parens from last change. Noted by Luciano Neri 2014-04-17 09:02:55 -06:00
Gregory Nutt
ebf221945c Move the un-definitions of __ramfuncs__ from the sam_clockconfig.c to the common up_internal.h header file so that the attribute will be applied the same to function definitions and prototypes. 2014-04-17 08:56:20 -06:00
Gregory Nutt
edc022ff1a Costmetic: Replace spaces with tabs 2014-04-16 16:26:46 -06:00
Gregory Nutt
cb802b02e1 STM32 OTGFS Host: Additional trace points from Leo 2014-04-16 12:56:21 -06:00
Gregory Nutt
b4f11306d3 STM32 F2: Fix SPI2 MOSI pin mapping. From dlsitzer 2014-04-16 12:35:33 -06:00
Gregory Nutt
044f7209f6 SAMA5 TWI: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals 2014-04-16 12:09:55 -06:00
Gregory Nutt
67bea2d342 SAMA5 SSC: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals 2014-04-16 10:58:23 -06:00
Gregory Nutt
be1bd45076 SAMA5 EMAC/GMAC: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals 2014-04-16 10:13:08 -06:00
Gregory Nutt
e654036b5a SAMA5 CAN: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals 2014-04-16 10:00:32 -06:00
Gregory Nutt
9d12aa82fe Sourceforge Patch #37: Missing semicolon 2014-04-16 09:43:34 -06:00
Gregory Nutt
a049b6a4c7 SAMA5 ADC: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals 2014-04-16 09:42:07 -06:00
Gregory Nutt
e26466e6e4 Updates to the STM32 OTGFS host logic from Leo 2014-04-15 08:49:33 -06:00
Gregory Nutt
fd08872892 Costmetic changes to some comments 2014-04-14 16:36:07 -06:00
Gregory Nutt
d4fc5ec41c examples/touchscreen: Add a configuration option to indicate that there is or is not an architecture-specific initialization function 2014-04-14 12:26:49 -06:00
Gregory Nutt
9d2ce57650 Removing more trailing whitespace 2014-04-13 17:54:59 -06:00
Gregory Nutt
25d4ff745b More trailing whilespace removal 2014-04-13 16:22:22 -06:00
Gregory Nutt
b7c65adeca Cosmetic changes for coding style; removal of dangling spaces at the end of lines 2014-04-13 13:18:06 -06:00
Gregory Nutt
c708eff608 Make sure that there is one space after for 2014-04-12 13:28:22 -06:00
Gregory Nutt
33d5d24964 Make sure that there is one space between while and condition 2014-04-12 13:09:48 -06:00
Gregory Nutt
eee82879cb Make sure that there is one space between if and condition 2014-04-12 12:53:19 -06:00
Gregory Nutt
65c6c071ff STM32 OTF FS host: Use of OTGFX_VTRACEn_ macros must match use of usbhost_tracen() interface 2014-04-12 10:09:37 -06:00
Gregory Nutt
bc144ad5d0 STM32 OTG FS Hose and others: Remove some warnings 2014-04-12 09:58:23 -06:00
Gregory Nutt
7bf7d8ebf6 STM32 OTGFS Host: Fix a logic error introduced in the last check-in 2014-04-12 09:33:52 -06:00
Gregory Nutt
aefb741a6a STM32 OTGFS: Host USB tracing instrumentation added by Leo 2014-04-12 08:44:22 -06:00
Gregory Nutt
27a7636440 SAMA5 TWI: Number of bytes transferred not be incremented on the first byte. From David Sidrane 2014-04-10 18:19:03 -06:00
Gregory Nutt
66df3afd46 mv ramlog.h and syslog.h to new include/nuttx/syslog 2014-04-10 09:29:30 -06:00
Gregory Nutt
1fa5d28754 Add logic for TM4C125GXL clocking based on prototype from from Daniel Carvalho with modifications. I think the LM4F120 may have broken before as well(?). In any event, the LM4F120 also works well with this chanage 2014-04-07 15:32:13 -06:00
Gregory Nutt
2a1212bf48 Cosmetic changes to comments and README 2014-04-07 15:28:04 -06:00
Gregory Nutt
43abe85674 Updated README files and comments 2014-04-07 07:43:28 -06:00
Gregory Nutt
398bf81c18 SAMA5 UDPHS: Fix error where bit was not cleared to acknowledge receipt of data and to setup for the next incoming data 2014-04-06 13:13:31 -06:00
Gregory Nutt
3e710c0080 SAMA5 clocking: USB clock setup needs to be done no matter the state of BMS and not matter how we are booting 2014-04-05 11:53:20 -06:00
Gregory Nutt
4993dd6ed3 Cosmetic update to comments 2014-04-05 11:35:05 -06:00
Gregory Nutt
77c968e36a Kconfig: Remove warnings. ARCH_RAMFUNCS depends on ARCH_HAVE_RAMFUNCS, so it is not possible to select ARCH_RAMFUNCS wihtout ARCH_HAVE_RAMFUNCS 2014-04-04 16:26:24 -06:00
Gregory Nutt
78607a7ea9 SAMA5: Don't use MMU PMD bufferable bit to try to control write-through vs write-back. It does not work that way 2014-04-04 16:05:20 -06:00
Gregory Nutt
0b014faa75 SAMA5 boards: Operation at 528Mhz has been verified 2014-04-04 10:36:53 -06:00
Gregory Nutt
e78f36e229 SAMA5: Update from David Sidrane to last RAM function change: Apparently inline functions need to placed into the same RAM section, or they do not get inlined. From David Sidrane 2014-04-04 08:59:39 -06:00
Gregory Nutt
724d2de086 Fix a build error when only USB device tracing is enabled (from David Sidrane). Also an update to the USB tracing document 2014-04-04 08:56:10 -06:00
Gregory Nutt
38e49b48c5 SAMA5: On some hardware, reconfiguring the PLL while executing out of NOR FLASH causes crashes. This was fixed by David Sidrane by implementing RAM functions. The killer code is copied and executed from ISRAM and the crash is avoided. 2014-04-03 16:08:18 -06:00
Gregory Nutt
e92eaabb3e SAMA5: Fix SAMA5 so that interpretation of BMS bit is correct. From David Sidrane 2014-04-03 15:47:34 -06:00
Gregory Nutt
489651d041 ARMv7-A: Typo fix from David Sidrane 2014-04-03 15:43:13 -06:00
Gregory Nutt
774a24a2c2 SAMA5: Cosmetic updates to comments and README files 2014-04-03 15:30:00 -06:00
Gregory Nutt
c00a3ce914 SAMA5: When booting from SDRAM, don't copy vectors to ISRAM. Instread just set the VBAR register to add address of the vectors in SDRAM 2014-04-03 14:09:11 -06:00
Gregory Nutt
362d539914 If LOWVECTORS is selected, then we need to clear the VBAR register. A bootloader may have left the VBAR in an bad state 2014-04-03 13:09:30 -06:00
Gregory Nutt
e3d2117b29 SAMA5: Make sure the MMU and caches are disabled on power up; flush the vector region D-Cache after copying interrupt vectors; make sure that D-Cache, I-Cache, and TLBs are invalidated after modifying the AXI MATRIX remapping 2014-04-02 16:27:00 -06:00
Gregory Nutt
3a1e08bc3c SAMA5: When running from SRAM, vectors must lie in ISRAM 2014-04-02 12:54:15 -06:00
Gregory Nutt
7372485e16 Updated comments and README 2014-04-02 09:03:29 -06:00
Gregory Nutt
df7429add0 SAMA5 DBGU: Add logic to suppress DBGU reconfiguration when started from a bootloader 2014-04-02 09:03:27 -06:00
Gregory Nutt
c6685c7f7d Fix typo introduced to the serial driver when the DBGU driver was added 2014-04-02 09:02:15 -06:00
Gregory Nutt
c0bf638798 SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console 2014-04-01 11:24:15 -06:00
Gregory Nutt
cec5d575c0 Cosmetic update to comments and README files 2014-03-31 17:25:39 -06:00
Gregory Nutt
4a37d6b042 SAMA5: Add DBGU register definition header file 2014-03-31 17:25:16 -06:00
Gregory Nutt
cd45038326 Remove double mapping of SDRAM when running from SDRAM 2014-03-31 15:08:04 -06:00
Gregory Nutt
bb7fbad8bd cosmetic updates to comments 2014-03-30 10:25:01 -06:00
Gregory Nutt
9767d1f976 Fix some backward conditional compilation 2014-03-30 08:29:21 -06:00
Gregory Nutt
406e91e262 SAMA5: Remove HSCMI-related functions that did not belong in sam_pmc.c and give them their own file 2014-03-30 08:00:59 -06:00
Gregory Nutt
eacf905089 Fix a rounding problem in HSMCI divider calculation 2014-03-29 18:13:00 -06:00
Gregory Nutt
c20f9c71b1 SAMA5D23 boards: When running out of SDRAM, need to query the PMC to determine operating frequency 2014-03-29 17:51:06 -06:00
Gregory Nutt
ff594d859e SAMA5: Add functions to calculate PLLACK, PCK, and MCK frequencies given the main clock frequency 2014-03-29 15:54:10 -06:00
Gregory Nutt
797f149481 SAMA5D3 Xplained: Has no NOR flash. Remove all NOR support from board configuration 2014-03-29 15:05:09 -06:00
Gregory Nutt
73f0ff6c47 Documentatin updated; fix errors in some comments 2014-03-28 09:52:07 -06:00
Gregory Nutt
1b11e89c25 Add support for the SAMA5D36 2014-03-28 08:33:01 -06:00
Gregory Nutt
32ca368f16 Fix a warning that happens with debug is disabled 2014-03-26 16:32:38 -06:00
Gregory Nutt
e5360ef5d9 SAM4E CMCC: Fix some errors introducted in last check-in 2014-03-26 16:32:16 -06:00
Gregory Nutt
8f7d58c011 Eliminate some warnings 2014-03-26 16:31:26 -06:00
Gregory Nutt
67695a2248 SAM3/4: SPI and HSCMI drivers with now use the CMCC is available; The SPI driver will now handle word sizes greater than 8-bits 2014-03-26 13:19:44 -06:00
Gregory Nutt
be88e99ec8 SAM4E USP: Re-vamp read request queue handling. Add logic to handle RX overrun errors 2014-03-26 11:38:47 -06:00
Gregory Nutt
d2001a1dc3 tools/astyle.sh: Formatting tool based on logic from Lorenz Meier 2014-03-26 08:50:48 -06:00
Gregory Nutt
f1e6ea46ed SAMA5D3: Fix some typos in last blind changes backported from the SAM4e. And verified 2014-03-25 16:11:33 -06:00
Gregory Nutt
9a724d8b36 backport a serial console fix from the sam4e to the sama5d3 2014-03-25 14:34:07 -06:00
Gregory Nutt
9b5e800cc0 SAM3/4 CMCC: if region to be invalidate is bigger than that cache, then invalidate all 2014-03-25 14:25:22 -06:00
Gregory Nutt
99f9239a00 SAM3/4 Serial: Fix a mysterious multi-tasking bug that can lock up the serial port 2014-03-25 12:44:03 -06:00
Gregory Nutt
3425d20072 SAM3/4 HSMCI: Update configuration names to match last change to Kconfig 2014-03-24 17:42:28 -06:00
Gregory Nutt
fa3f78c821 Add missing HSCMI configuration options; Make HSMCI configuration naming more compatible; Fix HSCMI clocking to use the CLKODD bit 2014-03-24 14:25:40 -06:00
Gregory Nutt
ff7c62574a SAM3/4 HSCMI: Another fix for complication with SAM4E 2014-03-24 10:25:02 -06:00
Gregory Nutt
eddfa4222f STM32 EMAC: Add support for IGMP hash table update. From Manuel Stühn 2014-03-24 09:32:48 -06:00
Gregory Nutt
f2d44cd8db SAM3/4: Changes for clean HSMCI compilation 2014-03-23 15:52:14 -06:00
Gregory Nutt
f613048460 SAM3/4: Rename CONFIG_GPIO*_IRQ to CONFIG_SAM34_GPIO*_IRQ 2014-03-23 15:51:34 -06:00
Gregory Nutt
b8ea1d49a8 SAM3/4: Rename CONFIG_GPIO*_IRQ to CONFIG_SAM34_GPIO*_IRQ 2014-03-23 15:51:08 -06:00
Gregory Nutt
6b4a4c8293 SAM4E-EK: Enable interrupt stack in all configurations 2014-03-23 10:12:57 -06:00
Gregory Nutt
788d5bb0fc Add logic to check interrupt stack usage 2014-03-23 10:11:58 -06:00
Gregory Nutt
88d0375f38 AVR assertion logic will report stack usage on crash if DEBUG_STACK is set 2014-03-23 10:11:14 -06:00
Gregory Nutt
c41976f23c Clean-up AVR stack colorization logic 2014-03-23 10:09:53 -06:00
Gregory Nutt
82c9694c5b All ARM Make.defs files should build up_checkstack.c if DEBUG_STACK is enabled 2014-03-23 10:07:52 -06:00
Gregory Nutt
5ac5506b35 All ARM assertion logic will show stack usage on assertion if DEBUG_STACK is enabled 2014-03-23 10:06:48 -06:00
Gregory Nutt
b6784677d0 Every ARM architecture must export g_instackbase 2014-03-23 10:05:21 -06:00
Gregory Nutt
e5f99798b8 SAM4E-EK UDP: prevent some bad recursive behavior 2014-03-22 17:30:17 -06:00
Gregory Nutt
4f54eb397d SAM3/4 lowputc: Fix compile errors when there is no serial console 2014-03-22 10:18:06 -06:00
Gregory Nutt
4baa2c294f SAM4E UDP: Fix handling of GLBSTAT:CONFIG bit. Was not being set 2014-03-21 13:31:45 -06:00
Gregory Nutt
3e177a7ba7 SAM4E UDP: Cosmetic updates to tracing and README 2014-03-21 10:45:12 -06:00
Gregory Nutt
1b5a599fc5 If DCD supports queuing of stall requests then USB MSC delay work-around is not necessary 2014-03-20 15:20:24 -06:00
Gregory Nutt
788fc5399d SAM4E UDP: Several fixes related to bulk endpoint transfers 2014-03-20 14:25:56 -06:00
Gregory Nutt
5b9f1f54c2 Add option to dump buffered USB trace data on an assertion 2014-03-20 10:56:30 -06:00
Gregory Nutt
055a134a36 SAM4E UDP: Fix errors associated with OUT packet size handling and bank interrupt bit handling 2014-03-19 18:02:57 -06:00
Gregory Nutt
7f587876f7 SAM4E: Fix handling of CSR:DIR bit 2014-03-19 13:34:15 -06:00
Gregory Nutt
4b93209d36 SAM4E UDP: Fix to handling of FADDR:FEN and CSR:TXCOMP 2014-03-19 12:20:42 -06:00
Gregory Nutt
9e68a2690f LPC17 USB Host: Minor clean-up after performing some regressin testing 2014-03-19 08:33:15 -06:00
Gregory Nutt
f713b4937c Improved description of CONFIG_ARMV7M_USEBASEPRI from Vijay Kumar 2014-03-19 07:16:44 -06:00
Gregory Nutt
fd3318a05e SAM4E UDP: Fix FIFO reset logic 2014-03-18 17:24:50 -06:00
Gregory Nutt
1da26f8f04 SAM4E UDP: Remove spurious clearing of RXSETUP 2014-03-18 15:19:45 -06:00
Gregory Nutt
82c93c91ea SAM4E UDP: Now receives one setup packet before dying 2014-03-18 12:38:34 -06:00
Gregory Nutt
c35470d553 TM4C123G Launchpad: Corrected processor configuration from Daniel Pereira de Carvalho 2014-03-18 11:21:31 -06:00
Gregory Nutt
7e2436d4cc SAM4E: Fix a few more UDP bring-up bugs. Still not working 2014-03-18 11:00:20 -06:00
Gregory Nutt
d5364f85b2 SAM4E: Revise board-specific USB MSC support 2014-03-18 09:31:02 -06:00
Gregory Nutt
2e586f04ab SAM4E: Add USB full speed device (UDP) driver 2014-03-17 12:37:55 -06:00
Gregory Nutt
b74e183dac SAM3/4: Fleshing out environment to support USB device (UDP) 2014-03-16 14:11:22 -06:00
Gregory Nutt
1d1b0e84c8 SAM3/4: Fix debug logic in DMAC that was causing the loss of interrupts 2014-03-14 11:57:42 -06:00
Gregory Nutt
adcfb40d01 SAM3/4 DMA fixes in general for SPI DMA in particular 2014-03-14 11:25:16 -06:00
Gregory Nutt
483fcdca03 SAM3/4: Integrate the SPI DMA interface with the existing code. Does not yet work. 2014-03-13 15:54:09 -06:00
Gregory Nutt
d32b85a938 SAM4E-EK: Add support for the SAM4E-EK AT25 serial flash 2014-03-13 14:07:35 -06:00
Gregory Nutt
c0c2fc4afe Backport SPI driver enhancements from SAMA5 to SAM3/4 2014-03-13 10:34:35 -06:00
Gregory Nutt
a300a46c8d SAM4E: Fix EMAC pin configuration. Driver is basically functionaly now. SAM4E-EK NSH configuration now has networking enabled by default 2014-03-13 09:03:03 -06:00
Gregory Nutt
fe9460d314 SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver 2014-03-12 15:03:59 -06:00
Gregory Nutt
907d273c4a SAM4E: Add support for the Cortex-M Cache Control block 2014-03-12 12:38:39 -06:00
Gregory Nutt
8e6bfea5aa SAM4E: Various bring-up fixes. NSH now works 2014-03-12 10:59:19 -06:00
Gregory Nutt
dfdad8c95b TM4C: Fix typos in memory map reported by Daniel Pereira de Carvalho 2014-03-12 07:23:58 -06:00
Gregory Nutt
f2f80f0813 SAM4E-EK: Purely cosmetic updates 2014-03-11 10:44:00 -06:00
Gregory Nutt
6638022126 SAM4E-EK: Add basic board support 2014-03-10 15:18:46 -06:00
Gregory Nutt
b25d2ace89 TM4C: A few more changes to get a clean compilation 2014-03-10 11:54:20 -06:00
Gregory Nutt
a659029017 Make sure that every reference to LM4F has corresponding logic for TM4C 2014-03-10 11:23:50 -06:00
Gregory Nutt
4a199188c8 TM4C: Add SYSCONTROL register defintion header file 2014-03-10 10:17:37 -06:00
Gregory Nutt
c9e6775d0c Add support for TM4C GPIOs 2014-03-10 08:12:35 -06:00
Gregory Nutt
967d48fbfb TIVA: Add memory map for the TM4C123 2014-03-09 13:57:35 -06:00
Gregory Nutt
8e08a25f11 Add pin multiplex definitions for the TM4C123 2014-03-09 13:15:09 -06:00
Gregory Nutt
7ac3ada62a TM4C: Add definitions for GPIO interrupts 2014-03-09 10:00:31 -06:00
Gregory Nutt
1c3627901f Add TM4C123 to the configuration system 2014-03-09 09:40:48 -06:00
Gregory Nutt
9889391ab8 Oop.. everything was named TM3C instead of TM4C in the last check-in 2014-03-09 09:26:29 -06:00
Gregory Nutt
b10bc3238b TM3C123: Add chip characteristics and interrupt definition files 2014-03-09 09:21:06 -06:00
Gregory Nutt
cb10073586 Hmmm.. not sure what happened but here is a missing TIVA file 2014-03-08 16:33:56 -06:00
Gregory Nutt
6cd5f3d321 functions and definitions renamed from lm_ to tiva_ 2014-03-08 15:50:26 -06:00
Gregory Nutt
8f5dfc3541 All files and functions beginning with lm_ changed to tiva_ 2014-03-08 13:29:09 -06:00
Gregory Nutt
88c2da5bc1 The old lm/ directories were enamed tiva/ to better support new products coming down the pipe from TI 2014-03-08 12:31:06 -06:00
Gregory Nutt
0fb4a075d1 LPC2378: SPI driver from Lizhuoyi 2014-03-08 11:37:50 -06:00
Gregory Nutt
1bdc4273bb LPC2378: I2C driver from Lizhuoyi 2014-03-08 11:03:58 -06:00
Gregory Nutt
729a3020a7 Fix some confusion in the code about vectored interrupts; fix so that it builds with prioritized interrutps disabed 2014-03-08 10:57:11 -06:00
Gregory Nutt
2f42d9f115 QEMU i486: Minor updates to VGA driver 2014-03-08 10:56:19 -06:00
Gregory Nutt
17faab1442 QEMU i486: New QEMU keyboard and VGA drivers from Lizhuoyi 2014-03-08 09:24:46 -06:00
Gregory Nutt
e43c7b7f1b QEMU i486: New QEMU keyboard and VGA drivers from Lizhuoyi 2014-03-08 09:24:24 -06:00
Gregory Nutt
48a31eede5 configs/rgmp/x86/default: Configuration converted to use the kconfig-frontends tools 2014-03-06 11:47:16 -06:00
Gregory Nutt
ea52d7d61c configs/pjrc-8051: Configuration converted to use the kconfig-frontends tools 2014-03-06 10:27:52 -06:00
Gregory Nutt
88d3bc23e1 onfigs/mx1ads/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 09:48:25 -06:00
Gregory Nutt
892c86df3c configs/us7032evb1/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 09:17:11 -06:00
Gregory Nutt
597c60a72d configs/skp16c26/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 08:28:49 -06:00
Gregory Nutt
d62967bf8d configs/ne64badge/ostest and demo9s12nec64/ostest: Configurations onverted to use the kconfig-frontends tools 2014-03-05 17:27:58 -06:00
Gregory Nutt
8fcd60b5df Use common naming for rest of the toolchains too 2014-03-05 16:29:58 -06:00
Gregory Nutt
18a08fe1d1 Use common naming for all buildroot toolchains 2014-03-05 15:37:07 -06:00
Gregory Nutt
40621d42fc Add configuration ettings for the on-demand paging option 2014-03-05 14:25:49 -06:00
Gregory Nutt
6526c47930 configs/ntosd-dm320/nettest: Configuration converted to use the kconfig-frontends tools 2014-03-05 12:16:02 -06:00
Gregory Nutt
64e5dbc534 configs/avr32dev1/nsh: Configuration converted to use the kconfig-frontends tools 2014-03-05 11:34:25 -06:00
Gregory Nutt
22a1e2aef3 Create AVR32 Kconfig files; reshuffled lots of configuration names 2014-03-05 11:25:36 -06:00
Gregory Nutt
da289c4962 Create AVR32 Kconfig files; reshuffled lots of configuration names 2014-03-05 11:23:54 -06:00
Gregory Nutt
c99476c950 configs/stm32f4discovery/pm: Configuration converted to use the kconfig-frontends tools 2014-03-04 08:58:01 -06:00
Gregory Nutt
a637978a1b configs/teensy/nettest: Configuration converted to use the kconfig-frontends tools 2014-03-03 15:54:38 -06:00
Gregory Nutt
f3168c222b configs/mcu123-lpc214x/usbmsc: Configuration converted to use the kconfig-frontends tools 2014-03-03 15:40:18 -06:00
Gregory Nutt
e4c4ab5ef2 onfigs/ez80f910200zco/nettest: Configuration converted to use the kconfig-frontends tools 2014-03-03 11:40:29 -06:00
Gregory Nutt
216859842a configs/olimex-strp711/nettest: Converted to use kconfig-frontends tools 2014-03-03 10:52:02 -06:00
Gregory Nutt
705a68349b configs/c5471evm/nettest converted use kconfig-frontends. C5471 build updated 2014-03-03 10:05:06 -06:00
Gregory Nutt
74414b9762 arch/arm/src/lpc2378/Kconfig: Create Kconfig for the platform; Adjust configuration names for compatibility, configs/olimex-lpc2378/nsh: Convert to use the kconfig-frontends tools 2014-03-02 11:08:23 -06:00
Gregory Nutt
740a3ce1b9 Removed unused configuratin variable: CONFIG_PGTABLE_VADDR 2014-03-01 16:21:28 -06:00
Gregory Nutt
210fbc3365 configs/lm3s8962-ek/nsh converted to use the kconfig-frontends tools 2014-03-01 13:29:23 -06:00
Gregory Nutt
07454e9241 configs/pic32-starterkit/nsh converted to use the kconfig-frontends tools 2014-03-01 11:10:30 -06:00
Gregory Nutt
74c50c12de configs/mirtoo/nsh converted to use the kconfig-frontends tools 2014-03-01 10:49:19 -06:00
Gregory Nutt
306271d151 Buildroot EABI (vs OABI) is now the default 2014-02-28 07:49:15 -06:00
Gregory Nutt
885a20d929 SAM3/4: Cosmetic updates to ADC register defintion header files 2014-02-27 08:41:03 -06:00
Gregory Nutt
095df26ed3 SAM4E: Completes all SAM4E register definition header files. Also a SAMA5D3 ADc register definition fix 2014-02-26 17:00:22 -06:00
Gregory Nutt
836f83f0c9 SAM4E: Add AES and AFEC register definition header files (AFEC incomplete) 2014-02-26 15:11:20 -06:00
Gregory Nutt
82bd647951 SAM4E: Add CAN and RSWDT register definition header files 2014-02-26 14:14:19 -06:00
Gregory Nutt
07adb58099 SAM4E: Add EMAC register definition header file 2014-02-26 11:57:42 -06:00
Gregory Nutt
28cf673bb0 SAM4E: Add CMCC register definition header file 2014-02-26 09:25:57 -06:00
Gregory Nutt
623b2522ff SAM4E: UDP register definition header file 2014-02-25 13:39:00 -06:00
Gregory Nutt
3d12bc9830 SAM3/4: Fix some build errors that crept in with the SAM4E support 2014-02-25 12:41:38 -06:00
Gregory Nutt
069f0f2d6a SAM4E: Update SAM3/4 TC and DMAC register definition header files 2014-02-25 10:56:23 -06:00
Gregory Nutt
e93d2da742 SAM4E: Update SAM3/4 ACC, DACC, and PDC register definition header files 2014-02-24 14:48:33 -06:00
Gregory Nutt
af8760e467 SAM4E: Update SAM3/4 GPBR, HSMCI, PWM, RSTC, RTC, RTT, SMC, and WDT register definition header files 2014-02-24 12:38:19 -06:00
Gregory Nutt
47d8cf4e62 SAM4E: Update SAM3/4 SMC and SUPC register definition header files 2014-02-24 10:26:44 -06:00
Gregory Nutt
d20d82b90e SAM4E: Update SAM3/4 EEFC, MATRIX, and PMC register definition header files 2014-02-24 09:49:02 -06:00
Gregory Nutt
36ead78f07 ARMv6-M/ARMv7-M: Correct a register handling error in signal delivery (Kernel build mode only). Noted by Mike Smith. 2014-02-23 08:25:49 -06:00
Gregory Nutt
07ae9d60e0 SAM4E: USART/USART header files and drivers updated to support the SAM4E 2014-02-22 13:46:23 -06:00
Gregory Nutt
956314b113 SAM4E: update SAM3/4 Kconfig for SAM4E peripheral selections 2014-02-22 11:56:04 -06:00
Gregory Nutt
291f4e61ca Rename sam3u_pmc.h to sam_pmc.h since it handles all of the SAM3/4 chips 2014-02-22 10:38:25 -06:00
Gregory Nutt
873ceb2d6d SAM4E: Update PMC and SPI register definition header files 2014-02-22 10:32:28 -06:00
Gregory Nutt
acba69d9a4 SAM4E: Pin multiplex definition header file 2014-02-21 18:10:53 -06:00
Gregory Nutt
ff92f4f81f SAM4E: Add support for PIO and peripheral clocks 2014-02-21 12:34:04 -06:00
Gregory Nutt
1b0fce86ad SAM4E: Add memory map header file 2014-02-21 09:33:16 -06:00