the number of members in the group is zero.
Repetition step:
If using waitpid() to wait a task has exited, the waitpid will use
nxsing_kill with signal number 0 to determine if that task is still
alive, and will call group_signal to dispatch signal for each member
of the group and perform signal handing checks, it will assert at
sched/group/group_signal.c:261.
Change-Id: I75ef015a261101277436d742897ce68fed44b5da
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
Summary:
- This commit fixes the signest_test issue with lc823450-xgevk
Impact:
- SMP with CONFIG_SCHED_CHILD_STATUS=y
Testing:
- Tested with ostest with lc82345-xgevk:rndis
- NOTE: need to revert the commit 65274d5fdf
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- SP_SECTION was introduced to allocate spinlock in non-cachable
region mainly for Cortex-A to stabilize the NuttX SMP kernel
- However, all spinlocks are now allocated in cachable area and
works without any problems
- So SP_SECTION should be removed to simplify the kernel code
Impact:
- None
Testing:
- Build test only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Pros:
* Reduce code differences
* Smaller allocations for !CONFIG_ARCH_USE_MODULE_TEXT
Cons:
* Likely to use more memory for !CONFIG_ARCH_USE_MODULE_TEXT in total
Tested with:
* sim:module on macOS
* esp32-devkit:nsh + CONFIG_MODULE on qemu
* lm3s6965-ek:qemu-protected + CONFIG_EXAMPLES_SOTEST on qemu
Summary:
- The CONFIG_SMP_IDLETHREAD_STACKSIZE was introduced to optimize
the idle stack size for other than CPU0
- However, there are no big differences between the idle stacks.
- This commit removes the config to simplify the kernel code
Impact:
- All SMP configurations
Testing:
- Tested with ostest with the following configs
- spresense:smp, spresense:rndis_smp
- esp32-devkitc:smp (QEMU), maix-bit:smp (QEMU)
- sabre-6quad:smp (QEMU), sabre-6quad:netnsh_smp (QEMU)
- raspberrypi-pico:smp, sim:smp (x86_64)
Signed-off-by: Masayuki Ishikawa <asayuki.Ishikawa@jp.sony.com>
arch: Allocate the space from the beginning in up_stack_frame
and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
I've seen a module with 16 bytes .rodata alignment for xmm operations.
It was getting SEGV on sim/Linux because of the alignment issue.
The same module binary seems working fine after applying this patch.
Also, tested on sim/macOS and esp32 on qemu,
using a module with an artificially large alignment. (64 bytes)
Summary:
- I noticed that getopt() test in ostest wailed with
esp32-devkitc:smp and spresense:smp
- Finally, I found that the task-specific data is not
initialized.
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with ostest esp32-devkitc:smp and spresense:smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
getopt() in the FLAT build environment is not thread safe. This is because global variables that are process-specific in Unix are truly global in the FLAT build. Moving the getopt() variables into TLS resolves this issue.
No side-effects are expected other than to getopt()
Tested with sim:nsh
since other subsystem doesn't need call these function anymore
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Idfb217c412db62d9f17f427310b75bb78785dc50
Fix missing semicolon at the end of a DEBUGASSERT statement:
sched/sched_sporadic.c: In function 'sporadic_budget_expire':
sched/sched_sporadic.c:512:15: error: expected ';' before 'period'
512 | period = (sporadic->repl_period >> 1) - unrealized;
| ^~~~~~
sched/sched_sporadic.c: In function 'nxsched_resume_sporadic':
sched/sched_sporadic.c:1078:19: error: expected ';' before 'period'
1078 | period = (sporadic->repl_period >> 1) - unrealized;
| ^~~~~~
Fix use of uninitialized variable in DEBUGASSERT statement:
sched/sched_sporadic.c:466:27: warning: 'sporadic' may be used uninitialized in this function [-Wmaybe-uninitialized]
466 | sporadic->nrepls > 0);
Also fixes some typos.
There should be no unexpected side-effects of this changed.
Tested with the stm32f4discovery:sporadic configuration (see PR #3097
Summary:
- This commit removes a redundant critical section in nxsem_tickkwait()
Impact:
- None
Testing:
- Tested with ping with the following configs
- spresense:rndis, spresense:rndis_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
it is wrong to define a new grpid_t, but not reuse pid_t,
because it make getpid(parent) == getppid(child) impossible.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
since there are situation which send singal to idle thread already,
CONFIG_SCHED_CHILD_STATUS=y
CONFIG_SCHED_HAVE_PARENT=y
Signo SIGCHLD will send to parent group, when child exit
Change-Id: Iceb2ac41948c1c3418839a3b5de70985d48c75d1
Signed-off-by: ligd <liguiding1@xiaomi.com>
Summary:
- During investigating critical section with semaphores, I noticed
that nxtask_flushstreams() is called with a critical section.
- The function calls lib_flushall() which handles a semaphore
in userspace.
- So it should be done without a critical section
Impact:
- SMP only
Testing:
- Tested with ostest the following configs
- esp32-devkitc:smp (QEMU), sabre-6quad:smp (QEMU)
- maix-bit:smp (QEMU), sim:smp
- spresense:smp
- Tested with nxplayer and stress test with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Otherwise, long-sleeping system calls using nxsig_timedwait
are not actually interrupted.
Tested with "ntpcstop" using lm3s6965-ek:qemu-protected config.
Summary:
- This commit changes spinlock APIs (spin_lock_irqsave/spin_unlock_irqrestore)
- In the previous implementation, the global spinlock (i.e. g_irq_spin) was used.
- This commit allows to use caller specific spinlock but also supports to use
g_irq_spin for backword compatibility (In this case, NULL must be specified)
Impact:
- None
Testing:
- Tested with the following configurations
- spresnse:wifi, spresense:wifi_smp
- esp32-devkitc:smp (QEMU), sabre6-quad:smp (QEMU)
- maxi-bit:smp (QEMU), sim:smp
- stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- During testing iperf -s with lc823450-xgevk:rndis,
I noticed that hard fault happens
- Finally, I found that group_kill_children() is not
not protected by a critical section
- This commit fixes this issue
Impact:
- SMP only
Testing:
- Tested with iperf with the following configurations
- lc823450-xgevk:rndis, spresense:rndis_smp
- Tested with ostest with the following configurations
- lc823450-xgevk:rndis, esp32-devkitc:smp (QEMU)
- sabre-6quad:smp (QEMU), maix-bit:smp (QEMU)
- spresense:rndis_smp, sim:smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes comments and label in nxtask_assign_pid()
Impact:
- None
Testing:
- Built with spresense:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- During reviewing sched_lock() in nxtask_assign_pid(),
I noticed that g_pidhash is not protected by a critical section
- Because g_pidhash is accessed in an interrupt context,
it should be protected by a critical section.
- Actually, nxsched_foreach(), nxsched_get_tcb() and so on
use a critical section.
Impact:
- No impact
Testing:
- Tested with spresense:wifi (non-SMP) and spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Because this_task() and nxsched_get_tcb() are protected inside the funtcions
- Also, enter_critical_section() is used in nxsched_set_affinity()
Impact:
- No impact
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
let's call either nx_dup/nx_dup2 or file_dup/file_dup2
instead just like other fs api: xxx->nx_xxx->file_xxx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I1aacfb9e25dc7b3fcb0345ff7b269b1953a01e5b
