sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
31,330 Commits 1 Branch 0 Tags 291 MiB
13b52da3fa
Commit Graph

256 Commits

Author SHA1 Message Date
Masayuki Ishikawa
da78c18397 Merged in masayuki2009/nuttx.nuttx/lc823450_autoled (pull request #532) 
lc823450 auto LED support

* arch/arm/src/lc823450: Add auto LED for CPU activity

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Add auto LED support

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-11-09 11:36:33 +00:00
Gregory Nutt
48690284fb configs/mx1ads: This commit removes board support for the mx1ads board. That board support was never completed and I no longer even have the hardware. The unfinished board support is still available in the Obsoleted repository if anyone would ever like to resurrect it. 2017-10-28 10:41:15 -06:00
Gregory Nutt
4b56c0cc0c boardctl(): Remove the BOARDIOC_GRAPHICS_SETUP command. 2017-10-15 07:56:04 -06:00
Gregory Nutt
270aa2848a Squashed commit of the following: 
BCM2708:  Add enough infrastructrue (more stubs) to get a clean compilation of the Pi Zero configuration (with many undefined things at link time).

    BCM2708:  Add basic interrupt handling logic

    BCM2708: Add interrupt register definitions.

    BCM2708:  Add irq.h header file

    BCM2708/Pi zero:  bcm_boot.c and bcm_memorymap.h now compile.  Added pizero linker script.

    BCM2708/Pi Zero:  Add Make.defs needed to build.

    arch/arm/include/bcm2708, arch/arm/src/bcm2708, configs/pizero:  Add some basic build and configuration logic.

    configs/pizero:  Add some basic structure of the Rasperry Pi Zero port.

    Created directory configs/pizero.  Nothing there now but a README.txt file.

    Add initial boot.c and memorymap.c files
    Author: Alan Carvalho de Assis <acassis@gmail.com>

    Add AUX/UART/SPI registers definition
    Author: Alan Carvalho de Assis <acassis@gmail.com>

    Pizero GPIO registers
    * Initial commit to add GPIO definitions
    * Add remaining GPIO registers definition
    Alan Carvalho de Assis <acassis@gmail.com>

    BCM2708 memory map:  Add VBASE defintions; fix VCSDRAM address per Alan; move all virtual address to the bottom of the file to avoid confusion -- top is all physical address; bottom is all veritural address.

    Add initial memory map to BCM2708/BCM2835
    Alan Carvalho de Assis <acassis@gmail.com>
 2017-10-09 13:11:17 -06:00
Gregory Nutt
8ef1f519d6 configs/Kconfig: Put some boards in alphabetical order. Makes life better. 2017-10-06 17:38:04 -06:00
Gwenhael Goavec-Merou
d9029f153c configs/nucleo-f410rb: Add support for the nucleo-F410RB board. 2017-09-25 12:59:39 -06:00
Masayuki Ishikawa
6f94e4e9e7 configs/lc823450-xgevk: LC823450-XGEVK board support 
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2017-08-02 21:10:15 +09:00
Titus von Boxberg
9658917766 corrected comment 2017-07-27 16:55:28 +02:00
raiden00pl
5bb3fbd69b configs: add stm32f334-disco basic support 2017-07-21 18:01:20 +02:00
Titus von Boxberg
4e735f46ae config changes for stm32f769i-disco 2017-07-19 19:07:53 +02:00
Simon Piriou
99c432c140 configs/b-l475e-iot01a: Add basic support for the STMicro b-l475e-iot01a board 2017-07-09 11:48:28 -06:00
Gregory Nutt
0de294a586 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:35:56 -06:00
Sebastien Lorquet
b2bb795520 Final fixes to get the nucleo-l432kc config build. execution not tested yet 2017-05-09 09:00:37 +02:00
Juha Niskanen
0ce7815efe configs: add nucleo-l452re board files 2017-05-04 15:24:16 +03:00
Juha Niskanen
f01ceffc0d configs: add nucleo-f091rc board files 2017-05-02 07:36:10 -06:00
Juha Niskanen
1829282442 configs: add nucleo-l496zg board files 2017-05-02 07:36:09 -06:00
Gregory Nutt
b45472baf8 Nucleo-F072RB: Add board configuration 2017-04-18 10:07:03 -06:00
Alan Carvalho de Assis
2cc7744b0c Add stm32f0discovery board support 2017-04-14 08:34:38 -06:00
Jussi Kivilinna
dffb8a67e3 Add entropy pool and strong random number generator 
Entropy pool gathers environmental noise from device drivers, user-space, etc., and returns good random numbers, suitable for cryptographic use. Based on entropy pool design from *BSDs and uses BLAKE2Xs algorithm for CSPRNG output.

Patch also adds /dev/urandom support for using entropy pool RNG and new 'getrandom' system call for getting randomness without file-descriptor usage (thus avoiding file-descriptor exhaustion attacks). The 'getrandom' interface is similar as 'getentropy' and 'getrandom' available on OpenBSD and Linux respectively.
 2017-03-30 07:38:37 -06:00
Gregory Nutt
5861d9610c Clicker2-STM32: Add an NSH configuration 2017-03-22 09:46:17 -06:00
Gregory Nutt
fe610e7a1d XMC4500 Relax: Add basic board support infrastructure of Infineon XMC4500 Relax Lite v1 2017-03-16 10:52:01 -06:00
Simon Piriou
ef0fe50ae6 photon: add LEDs and BUTTONS support 2017-03-11 18:26:46 +01:00
Simon Piriou
0198540532 configs: add Particle Photon board support 2017-03-10 19:39:21 +01:00
Gregory Nutt
197ba3b527 EZ80F910200KITG: Missing support logic in configs/Kconfig 2017-03-09 10:50:46 -06:00
raiden00pl
0188bc49ce Add Nucleo F334R8 board configuration 2017-02-26 12:42:43 +01:00
Gregory Nutt
0fc226dd53 Changes from review of last PR 2017-02-19 14:58:37 -06:00
Marc Rechté
1838171d43 Add twr-k64f120m config and fix some ENET related problems 2017-02-19 21:20:56 +01:00
David Sidrane
f56e0a43a4 Inital commit of NXP Freedom-k66f development board 2017-02-13 14:35:51 -10:00
Gregory Nutt
f8f2c00415 Olimex STM32 P407: Update clocking using STM3250G; Verify GPIOs. 2016-12-21 10:45:36 -06:00
Gregory Nutt
d9e040d76b Remove all Calypso board configurations 2016-12-13 18:24:49 -06:00
Gregory Nutt
35dfe25430 Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver. 2016-12-06 08:51:37 -06:00
Gregory Nutt
55dd1c87b3 Remove all references to BOARDIOC_ADCSETUP 2016-12-05 15:31:40 -06:00
Gregory Nutt
b999e63c82 Remove some references to BOARDIOC_PWMTEST and board_pwm_setup(). Still lots more. 2016-12-05 13:54:12 -06:00
Masayuki Ishikawa
b3d182b5d5 Add support for the SAM5CMP-DB board 2016-12-04 07:06:17 -06:00
Gregory Nutt
c0cbea2550 Remove RGMP and RGMP drivers. 2016-12-02 09:49:33 -06:00
Alan Carvalho de Assis
51f345ff88 Add basic support to Micromint Bambino 200E board. This includes contributions from Jim Wolfman. 2016-11-01 14:42:54 -06:00
Gregory Nutt
3e4d2dba65 Merge remote-tracking branch 'origin/master' into esp32 2016-10-21 12:35:41 -06:00
Gregory Nutt
7a007a1e8e ESP32: The ESP32 Core V2 board does not have any user controllable LEDs. 2016-10-21 07:35:56 -06:00
Gregory Nutt
2dbcdd781c Correct STM32 Butterfly2 URL. Correct some comments. 2016-10-20 07:18:23 -06:00
Gregory Nutt
29ccdf350a Merge remote-tracking branch 'origin/master' into esp32 2016-10-16 09:53:03 -06:00
Ken Pettit
201a32cf8c Add support for the RISC-V architecture and configs/nr5m100-nexys4 board. I will be making the FPGA code for this available soon (within a week I would say). The board support on this is pretty thin, but it seems like maybe a good idea to get the base RISC-V stuff in since there are people interested in it. 2016-10-16 09:47:07 -06:00
Gregory Nutt
52b1ca8747 configs/esp32-core: Add basic directory to support the ESP32 Core board V2 2016-10-12 15:27:34 -06:00
Alan Carvalho de Assis
4195692bb4 Change "Board LED support" to "Board LED Status support" 2016-10-11 14:29:27 -06:00
Alan Carvalho de Assis
4825a8fc3f STM32 Minimum: Note in Kconfig that the board supports buttons 2016-10-11 14:13:29 -06:00
Jim Wylder
cb4f1a4cec Support basic booting and nsh on Motorola MDK 
The Motorola MDK is based off of an earlier version
of NuttX.  This only provides a basic nsh shell.

Signed-off-by: Jim Wylder <jwylder@motorola.com>
 2016-09-14 15:42:10 -05:00
Gregory Nutt
cfad547b8d Changes from review of PR 118 2016-08-18 11:29:48 -06:00
Michał Łyszczek
47fae83b16 Add minimal support for Kamami stm32butterfly2 development board 
Supported is:
* LED1-4
* UART2 (terminal for nsh)
 2016-08-14 16:32:11 +02:00
Gregory Nutt
326be154ad Freedom K64F: Update README.txt; add proper (auto) LED support 2016-07-02 07:56:43 -06:00
Gregory Nutt
7a7998e4f9 Add support for the NXP Freedom-K64F board. This is primarily the work of Jordan Macintyre. I leveraged this code from https://github.com/jmacintyre/nuttx-k64f 2016-07-01 15:42:21 -06:00
Gregory Nutt
fd9c9a7f4f Add logic to support custom board directories that include a Kconfig file. During the context phase of the build, any Kconfig file in the custom board directory is copied into configs/dummy, replacing the existing Kconfig file with the target Kconfig file. 2016-06-29 11:53:00 -06:00