These configs are changed based on below rules.
1. always enable +CONFIG_LV_USE_NUTTX=y
2. If touchpad is used, enable +CONFIG_LV_USE_NUTTX_TOUCHSCREEN=y
3. enable log by +CONFIG_LV_USE_LOG=y
4. If -CONFIG_LV_MEM_CUSTOM=y previously defined, replace it with +CONFIG_LV_USE_CLIB_MALLOC=y +CONFIG_LV_USE_CLIB_SPRINTF=y +CONFIG_LV_USE_CLIB_STRING=y
5. If -CONFIG_LV_PORT_USE_FBDEV=y, default config is for fbdev. If -CONFIG_LV_PORT_USE_LCDDEV=y, +CONFIG_LV_USE_NUTTX_LCD=y
6. Remove all -CONFIG_LV_TICK_CUSTOM=y -CONFIG_LV_TICK_CUSTOM_INCLUDE="port/lv_port_tick.h"
7. If -CONFIG_LV_PORT_LCDDEV_DOUBLE_BUFFER=y, replace it with CONFIG_LV_NUTTX_LCD_DOUBLE_BUFFER=y. For fbdev, double buffer is automatically detected.
8. If -CONFIG_LV_COLOR_16_SWAP=y, need to upgrade the LCD driver to support hardware byte order swap.
Signed-off-by: Xu Xingliang <xuxingliang@xiaomi.com>
1.
In file included from chip/stm32_rtc.c:31:
chip/stm32_rtc.c: In function 'rtchw_set_alrmar':
chip/stm32_rtc.c:761:11: warning: format '%x' expects argument of type 'unsigned int',
but argument 3 has type 'uint32_t' {aka 'volatile long unsigned int'} [-Wformat=]
761 | rtcinfo(" ALRMAR: %08x\n", getreg32(STM32_RTC_ALRMAR));
| ^~~~~~~~~~~~~~~~~~
chip/stm32_rtc.c:761:25: note: format string is defined here
761 | rtcinfo(" ALRMAR: %08x\n", getreg32(STM32_RTC_ALRMAR));
| ~~~^
| |
| unsigned int
| %08lx
2.
arm-none-eabi-ld: staging/libdrivers.a(userled_lower.o): in function `userled_setled':
drivers/leds/userled_lower.c💯 undefined reference to `board_userled'
Regression:
stm32h7/linum-stm32h753bi: add support to leds
Signed-off-by: chao an <anchao@lixiang.com>
The LINUM-STM32H753BI is a board with RS485, RS232, SD Card, CAN,
SD Card, USB, Ethernet, LCD, etc.
Signed-off-by" Jorge Guzman jorge.gzm@gmail.com
ci: correction in nsh defconfig file of LINUM-STM32H753BI
The class device only handles descriptor information specific to the class,
and shared descriptor information is passed through parameters and
handled by the composite driver.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
When I try to set priorities in certain programs, such as init_priority(HIGH_PRIORITY), I've noticed that during linking, there's no guarantee that the programs will be compiled in the sequence I've specified based on priority. This has led to some runtime errors in my program.
I realized that in the ld file, when initializing dynamic arrays, there's no assurance of initializing init_array.* before init_array. This has resulted in runtime errors in the program. Consequently, I've rearranged the init_array.* in the ld file of NuttX to be placed before init_array and added a SORT operation to init_array.* to ensure accurate initialization based on priorities during linking.
Supported external SDRAM (MT48LC4M32B2B5-6AIT:L) on STM32H745I-DISCO dev board.
Though MT48LC4M32B2B5-6AIT:L SDRAM itself provides 32-bit data bus, STM32H745I-DISCO board
routes only DQ[15:0] bits. Thus only half of the memory can be accessed: the accessible memory
configuration is only 1 Meg x 16 x 4 banks instead of 1 Meg x 32 x 4 banks.
Thus the accessible memory size is 8 MBytes.
Testing:
nsh> ramtest -a 0xD0000000 -s 8388608
RAMTest: Marching ones: d0000000 8388608
RAMTest: Marching zeroes: d0000000 8388608
RAMTest: Pattern test: d0000000 8388608 55555555 aaaaaaaa
RAMTest: Pattern test: d0000000 8388608 66666666 99999999
RAMTest: Pattern test: d0000000 8388608 33333333 cccccccc
RAMTest: Address-in-address test: d0000000 8388608
nsh>
