sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
10,391 Commits 1 Branch 0 Tags 291 MiB
147042218b
Commit Graph

1262 Commits

Author SHA1 Message Date
Gregory Nutt
996d6c9d55 Most superstitous updates to the RAMTROM driver make it more compatibile with the version used by PX4. From David Sidrane 2014-12-26 07:59:09 -06:00
Gregory Nutt
64ce7563f2 CC3000: Fix yet another typo in last two commitsgit diff I should not be doing this when I have the flugit diff 2014-12-18 16:27:46 -06:00
Gregory Nutt
49a22f1ccb CC3000: Oops. Fix an error in the last commit 2014-12-18 07:39:55 -06:00
Gregory Nutt
2fe506d70c CC3000 Fix: Data can be unaligned. When dereferences as an input ntosh(), a bad value is returned. Reported by Alan Carvalho de Assis 2014-12-18 07:18:00 -06:00
Gregory Nutt
8e4f7230f9 ADXL345: Don't select device if only change SPI settings 2014-12-17 12:01:18 -06:00
Gregory Nutt
34609141b0 ADXL345: Free allocations on failure 2014-12-16 17:27:09 -06:00
Gregory Nutt
d818ab5e35 Update the ADXL345 interface following the current interface scheme 2014-12-16 11:45:28 -06:00
Gregory Nutt
c9ca51fc8a Minor clean-up associated with the ADX345 driver 2014-12-16 10:18:44 -06:00
Gregory Nutt
ae18f9dacd Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg() 2014-12-16 09:54:32 -06:00
Gregory Nutt
10863af628 Add ADXL345 accelerometer driver. From Alan Carvalho de Assis 2014-12-16 08:16:53 -06:00
Gregory Nutt
ece6963c21 Update a README file 2014-12-16 07:51:50 -06:00
Gregory Nutt
4aa9320da9 Update README files 2014-12-15 19:01:40 -06:00
Gregory Nutt
623757d77c Update TODO list and add REVISIT comment 2014-12-13 08:44:28 -06:00
Gregory Nutt
d09bb13833 In case a thread is doing a blocking operation (e.g. read()) on a serial 
device, while it is being terminated by pthread_cancel(), then
uart_close() gets called, but the semaphore (dev->recv.sem in the above
example) is still blocked.

This means that once the serial device is opened next time, data will
arrive on the serial port (and driver interrupts handled as normal), but
the received characters never arrive in the reader thread.

This patch addresses the problem by re-initializing the semaphores on the
last uart_close() on the device.
 2014-12-13 08:07:21 -06:00
Gregory Nutt
a84bd3f433 M25P serial flash driver: Add subsector size of the M24P16 part. From Lazlo 2014-12-10 18:48:36 -06:00
Gregory Nutt
cdc8fc52d1 SmartFS: Implements wear-leveling in the SmartFS. From Ken Pettit 2014-12-09 14:11:15 -06:00
Gregory Nutt
8bd5556b47 Fix compilation errors if CONFIG_DISABLE_MOUNTPOINT is selected 2014-12-08 07:14:31 -06:00
Gregory Nutt
c0c108d5e2 Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet 2014-12-05 09:13:34 -06:00
Gregory Nutt
3cc6bee189 Nucleo-f4x1re: Fix some joystick pin definitions 2014-12-04 12:04:21 -06:00
Gregory Nutt
1f2447502f SAMA5D3 Xplained: Add support for the Itead Joystick shield 2014-12-03 12:24:23 -06:00
Gregory Nutt
19d31412f7 Update/correct some comments 2014-11-29 07:08:30 -06:00
Gregory Nutt
2b8fe6709b Add an analog joystick driver. Initial checkin is only a little more of a clone of the discrete joystick driver and is as-of-yet untested 2014-11-28 19:59:27 -06:00
Gregory Nutt
24d4253e1f Fixes to get the discrete joystick driver and test working 2014-11-28 15:56:18 -06:00
Gregory Nutt
544322edb9 DJoystick: Add a new ioctl to get the support joystick discrete signals 2014-11-28 15:39:57 -06:00
Gregory Nutt
0d04a4e9ba Fix missing quote in Kconfig 2014-11-28 10:16:58 -06:00
Gregory Nutt
e42f7b552f This commit is a set of patches 02/11 through 03/11 correcting issues with the CC3000 networking (01/11 was committed separated). Among these 10 patches: 
03/11: CC3000 driver was getting stuck at recv() when remote host closed connection and application tried to read data from remotely shutdown socket. This patch adds proper handling for remotely closed socket event.

07/11: Socket state initialization was done in 'register', while it should be initialized in 'open' and deinitialized in 'close'. Old way caused problems when device is closed, power-cycled and then reopened as old socket state was left enabled.

08/11: Select thread was getting stuck after 'close, power-cycle, reopen', since selectsem was not properly setup and cleaned up.

09/11 'maxFD' was not properly reset in select worker and not checked for before calling cc3000_select().

10/11: After wlan_stop()/cc3000_close(), irqsem was left with count '-1'. Therefore on next wlan_start()/cc3000_open(), initial value for irqsem was wrong. Additional repeated wlan_start()/wlan_stop() decreased irqsem value further. Obviously this causes driver not to function correctly and freeze.

Patch moves initialization and destruction of waitsem, irqsem and readysem to cc3000_open/cc3000_close.

All are: Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
 2014-11-28 08:52:52 -06:00
Gregory Nutt
5f0343bed9 Use usleep instead of usdelay as CONFIG_BOARD_LOOPSPERMSEC might not be calibrated correctly and CC3000 is fine with longer wait. 
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
 2014-11-28 08:16:30 -06:00
Gregory Nutt
2d9bd07525 Some additional, minor improvements to djoystick interrupt controls 2014-11-27 20:20:10 -06:00
Gregory Nutt
0ec5043a4e Add an interface definition and upper half driver for a discrete joystick device 2014-11-27 17:42:16 -06:00
Gregory Nutt
57e57bba36 LPC4357 EVB: Ooops got sense of the LED GPIO backward 2014-11-27 12:38:04 -06:00
Gregory Nutt
f2603866e0 Widen the name space: Rename CONFIG_SPI_EEPROM to CONFIG_EEPROM so that I2C EEPROMs can live there too 2014-11-27 11:08:27 -06:00
Gregory Nutt
e3898a7911 Update README 2014-11-27 10:40:51 -06:00
Gregory Nutt
d5c808c1fe EEPROM: Add a README file 2014-11-27 09:14:19 -06:00
Gregory Nutt
bc3212d70e EEPROM: Add a README file 2014-11-27 09:14:00 -06:00
Gregory Nutt
d8107d2b97 Loop device should return -EINTR is interrupt by a signal 2014-11-27 09:12:15 -06:00
Gregory Nutt
b29925a63b EEPROM: prevent writes past end of device. From Sébastien Lorquet 2014-11-27 07:59:43 -06:00
Gregory Nutt
3f2c90c1e9 Fix minor typo in C comments 2014-11-27 06:49:07 -06:00
Gregory Nutt
1a33afb66c Fix to get a clean build with EEPROM support disabled 2014-11-26 15:37:01 -06:00
Gregory Nutt
40b27115cc Add support for generic EEPROM access via a character driver. Add also the EEPROM driver itself. From Sebastien Lorquet 2014-11-26 13:55:34 -06:00
Gregory Nutt
9ac09db800 More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 13:46:14 -06:00
Gregory Nutt
2994448d85 More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 13:15:09 -06:00
Gregory Nutt
5d231b25f0 SAMA5D3 Xplained: Add an apps/examples/bridge configuration 2014-11-20 16:24:30 -06:00
Gregory Nutt
33627632a5 Network: Fix compilation problem when mutliple networks enabled 2014-11-17 10:22:30 -06:00
Gregory Nutt
b9cd425bc2 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU in all drivers/net (except slip.c) 2014-11-16 08:53:20 -06:00
Gregory Nutt
25a9005ce7 Remove use of NET_LL_HDRLEN from Ethernet drivers. Use ETH_HDRLEN instead 2014-11-15 09:05:34 -06:00
Gregory Nutt
2b758537ea Network: Misc fixes for clean complete with both Ethernet and SLIP enabled 2014-11-15 08:55:50 -06:00
Gregory Nutt
388ef8db1a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
8d00912207 Add mirror (x/y) and inverse video (black<->white) options to the ST7565 LCD driver. From Pierre-noel Bouteville. 2014-11-15 06:43:12 -06:00
Gregory Nutt
ebdff66c8b ARP: Add support for the case where there are multiple networks: One being Etherenet and the other not (say slip or perhaps someday PPP). In that case, we need to suppress ARP-related operations on the SLIP/PPP interface only 2014-11-14 18:25:33 -06:00
Gregory Nutt
e03c764d92 I don't think that the net_route function has ever worked correctly. The source ip was updated in the match struct instead of the route ip. From Brennan Ashton. 2014-11-14 16:45:25 -06:00
Gregory Nutt
ca15802ae5 Trival fix to comment 2014-11-14 10:58:13 -06:00
Gregory Nutt
9f3d4b30fb Add st7565.c to build 2014-11-14 06:55:16 -06:00
Gregory Nutt
3576e249b5 Add driver for ST7565 that works with NHD‐C12864KGZ display. From Pierre-noel Bouteville. 2014-11-13 16:03:52 -06:00
Gregory Nutt
c956d6d820 Add support for seeking in BCH. From Sébastien Lorquet. 2014-11-13 09:04:42 -06:00
Gregory Nutt
d9b238b002 Extend MTD support to M25P16. From Sébastien Lorquet 2014-11-07 10:35:03 -06:00
Gregory Nutt
b99db64f15 rwbuffer, fix compiler error 2014-11-05 15:26:48 -06:00
Gregory Nutt
5120d745fd Fix some typos 2014-10-29 10:48:50 -06:00
Gregory Nutt
6c9f325e1e Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS 2014-10-27 11:31:16 -06:00
Gregory Nutt
0196b77961 EFM32: Add IDLE power management hooks. Nothing implemented; just define the hooks 2014-10-22 07:26:31 -06:00
Gregory Nutt
37e08c3b49 The olimex-efm32g880f128-stk now defaults to use LEUART1 as the serial console. Also fixes lots of compile bugs from the original LEUART checkin 2014-10-21 11:38:51 -06:00
Gregory Nutt
d13c9a08b9 EFM32: Add configuration support for LEUARTs 2014-10-21 09:37:02 -06:00
Gregory Nutt
fa3753c466 rivers: enable usage of ili9341 
This enables build and configuration of the ili9341 lcd interface driver.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:27:56 -06:00
Gregory Nutt
beff697bc7 drivers: implements lcd interface for ili9341 
This implements the lcd interface to displaying data on the lcd display powered
by the ili9341 lcd driver.

This driver implements all methods defined in the lcd_dev_s structure except
getcontrast and setcontrast. They are not supported by the hardware.

Furthermore the driver allows to use multiple displays powered by the ili9342 IC
with only one driver instance. So it is theoretically possible to support more
than one connected ili9341 lcd display. The displays can be configured
independently. Currently two lcd devices supported. This should be enough for
now. Read the corresponding code section of how to add more devices if
neccessary.

The following settings are configurable:

1. Pixel format
   Define the pixel format of the connected display. Currently only
   RGB-565 supported.

2. Orientation
   Define the orientation of the display. This can be portrait or
   landscape and reversed values.

1. Write only
   The driver allows to disable any getrun method if not neccessary to
   reduce code size. This is done by enable CONFIG_LCD_NOGETRUN in the nuttx
   configuration.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:19:43 -06:00
Gregory Nutt
1a27a4d4c0 Eliminate warnings 2014-10-11 17:02:35 -06:00
Gregory Nutt
c38b81431f Cosmetic updates to comments 2014-10-11 15:20:21 -06:00
Gregory Nutt
d7d759f7a7 Update everything under nuttx/drivers to use the corrected syslog interfaces 2014-10-08 10:18:58 -06:00
Gregory Nutt
b33f8b3013 MTD read-ahear/write buffering layer seems functional 2014-09-25 13:35:10 -06:00
Gregory Nutt
a5bc26db4a Fixes for compile of rwbuffer.c 2014-09-25 11:02:30 -06:00
Gregory Nutt
7c89724b99 A few fixes for clean apps/examples/mtdrwb build 2014-09-25 10:41:47 -06:00
Gregory Nutt
6626f62b08 In at45db_bwrite, the buffer is not increased when writing more than 1 page. Sourceforge bug #34 2014-09-25 06:48:04 -06:00
Gregory Nutt
34a057334c Update SMART FS procfs support. From Ken Pettit 2014-09-22 11:19:49 -06:00
Gregory Nutt
b37c0a832a Fixes to avoid some hang conditions using STM32 CAN 2014-09-17 08:35:03 -06:00
Gregory Nutt
47d55c28dc Mostly cosmetic changes 2014-09-04 10:28:38 -06:00
Gregory Nutt
23147c40a5 Remove final traces of the 8015 from the NuttX source tree 2014-09-01 13:21:15 -06:00
Gregory Nutt
205260d5e2 Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
1780810d3d Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
54fa3b0b59 Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
9cd1ddada4 Rename kmemalign to kmm_memalign and krealloc to kmm_realooc for consistency with other naming 2014-08-31 15:27:37 -06:00
Gregory Nutt
2906ff6a4a Cosmetic: Fix all comments, defaults, etc. that references the defunct name user_start 2014-08-30 11:14:51 -06:00
Gregory Nutt
e3ff0689bb Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
98cf3b06e5 nuttx/drivers: Remove explicity references to errno. That is a problem from within the kernel for certain configurations 2014-08-28 16:59:06 -06:00
Gregory Nutt
ad9b3f8ab8 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
cf242fbeb4 SAM4E-EK: Add ILI9341-based LCD driver 2014-08-20 11:45:01 -06:00
Gregory Nutt
004788d7c0 Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires 2014-08-17 16:51:56 -06:00
Gregory Nutt
7cc93b708a SAMA5 PHY: Add more debug instrumentation; Fix logic that would be used to disable PHY interrupts 2014-08-17 14:07:53 -06:00
Gregory Nutt
e04ab2bcfc In order to get PHY interrupts, they must be enabled at the PHY (still don't get PHY interrupts) 2014-08-17 13:03:18 -06:00
Gregory Nutt
eb5e2e4b20 Finishes the ioctl definition to subscribe to PHY events. Revamp network ioctl signature to support arguments other than struct mii_ioctl_data. 2014-08-16 14:08:04 -06:00
Gregory Nutt
8428a58bdc Add support for an ioctl that can be used to notify an application when there is a change in the network status signalled by a PHY interrupt 2014-08-16 12:56:02 -06:00
Gregory Nutt
4beb3c0ad7 Move SLIP prototypes from net.h to new slip.h 2014-08-16 10:23:17 -06:00
Gregory Nutt
c52f634b79 Standardize a PHY interrupt attachment interface 2014-08-16 08:34:36 -06:00
Gregory Nutt
320707fdfa SAMA5: Fix bugs in timer/counter interrupts and one-shot timer 2014-08-10 10:47:38 -06:00
Gregory Nutt
a3e28c2c16 audio NULL driver: Fix an error in a variable name 2014-08-09 10:33:31 -06:00
Gregory Nutt
6e0acd7cd4 WM8904: Don't use MSEC2TICK in timeout calculation 2014-08-08 11:02:45 -06:00
Gregory Nutt
c9661ad5a7 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
bb29ba0a00 Costmetic changes 2014-08-05 10:03:29 -06:00
Gregory Nutt
8065ab73a4 WM8904: Add reset logic to put the part back in its initial state after playing each WAV file. Base samles per second on frame length, not bits-per-sample. Use a different frame length for 8-bit and 16-bit data 2014-08-04 19:26:43 -06:00
Gregory Nutt
dc8b040573 WM8904: Correct calculation of bitrate (I am not sure why this is correct). LR clock divisor is now a constant 32-bits per frame. Conditioned out interrupt logic; it is not being used. Also added some FLL lock interrupt/poll logic (which was subsequently disabled). 2014-08-04 15:08:20 -06:00
Gregory Nutt
c68e42c437 WM8904: Restore mystery bit in setup that was accidentally tossed before 2014-08-03 19:29:02 -06:00
Gregory Nutt
678c0aac8d WM8904: Tried disabling the SYSCLK while updating the FLL. Didn't help but is still probably a correct change 2014-08-03 18:44:51 -06:00
Gregory Nutt
72b739fbcb WM8904: Add logic to analyze BCLK setup 2014-08-03 17:11:38 -06:00