sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
10,504 Commits 1 Branch 0 Tags 291 MiB
15618613ab
Commit Graph

296 Commits

Author SHA1 Message Date
Gregory Nutt
e2bde7037f Fix a compilation error. From Macs Neklyudov 2015-02-16 14:30:15 -06:00
Gregory Nutt
3724a5e98e RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
Gregory Nutt
601d99183b SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing. 
SAM4E-EK: The nsh configuration now configures the Ethernet driver for execution on the HP work thread.
 2015-02-10 11:10:55 -06:00
Gregory Nutt
761d4bdbba Fix some warning 2015-02-09 18:24:31 -06:00
Gregory Nutt
4b74554fd2 Clone the SAMA5D4 IPv6 support to the SAM4E EMAC and SAMAd3 EMAC and GMAC drivers. 2015-02-09 17:16:55 -06:00
Gregory Nutt
59d5149de6 Remove and extra endif from the Kconfig 2015-02-03 12:46:40 -06:00
Gregory Nutt
1d534ff896 Convert the 64-bit usec limit to a 32-bit tick limit 2015-02-03 07:18:17 -06:00
Gregory Nutt
cabaf7399a SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
Gregory Nutt
7e46e94546 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
05c5c8c337 Add CONFIG_STACK_COLORATION that does the same thing as CONFIG_DEBUG_STACK but without enabling debug. From David Sidrane 2015-01-24 06:03:39 -06:00
Gregory Nutt
32d2a4c548 All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called 2015-01-21 11:36:33 -06:00
Gregory Nutt
1ad73c52b1 Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address. 2015-01-20 15:52:25 -06:00
Gregory Nutt
a53ae59284 Networking: Add missing raw/packet socket support to all Ethernet drivers 2015-01-20 15:14:29 -06:00
Gregory Nutt
92f440c20c Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly. 2015-01-20 06:26:14 -06:00
Gregory Nutt
278c485229 Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received 2015-01-15 09:31:23 -06:00
Gregory Nutt
89538ac4a2 - Rename devif_input() ipv4_input() 
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
 2015-01-15 08:03:56 -06:00
Gregory Nutt
2f4aa0bde7 Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers 2015-01-15 07:07:39 -06:00
Gregory Nutt
1d2a4f3b4c Tiva Timer: Timer test must attach a timer handler or the timer is stopped at the first interrupt 2015-01-13 15:55:54 -06:00
Gregory Nutt
ad36e75a40 Fixes for more issues found by cppcheck 2014-11-24 17:00:26 -06:00
Gregory Nutt
2d51315e66 SAM EMAC: Fix typo in the check for successfull allocation of a timer 2014-11-18 14:20:31 -06:00
Gregory Nutt
63526fb1ef Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers 2014-11-16 08:10:06 -06:00
Gregory Nutt
1055ba464d SAM3/4: Add missing SPI0 clock configuartion macro for the SAM4S 2014-11-16 06:43:08 -06:00
Gregory Nutt
388ef8db1a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
642bf34e45 Fix typo is SAM4E pinmap file 2014-11-03 11:59:53 -06:00
Gregory Nutt
f76962257e Costmetic changes -- spacing, comments. 2014-10-30 16:33:40 -06:00
Gregory Nutt
87ee3f2fc7 SAM3/4: Fix error serial TERMIOS ioctl handling 2014-10-30 12:23:15 -06:00
Gregory Nutt
60a853df95 Add support for SAM3/4 basic TERMIOS and flow control. There are issues with IFLOW control: PDC or DMAC support is required 2014-10-29 15:47:15 -06:00
Gregory Nutt
761059aee2 SAM4: Fix a usbnsh build problem that has crept into all serial drivers 2014-10-28 15:44:47 -06:00
Gregory Nutt
e01ceb3df8 SAM4E: Fix error TC header file 2014-10-28 09:22:37 -06:00
Gregory Nutt
9573023529 SAM4E-EK: Add support for PHY insterrupt 2014-10-24 12:28:57 -06:00
Gregory Nutt
6d4f448c31 Another fix to SAM3/4 GPIO IRQ issue 2014-10-24 10:55:52 -06:00
Gregory Nutt
69966a1b62 SAM3/4: Fix conditional compilation in GPIO IRQ logic 2014-10-24 10:44:43 -06:00
Gregory Nutt
b7a35c1e65 SAM4E: Fix options to select GPIO interrupts in Kconfig 2014-10-24 09:29:01 -06:00
Gregory Nutt
82381dbdc6 Only SAM4 family has RTTDIS bit in the MR register. SourceForge bug #33 from Fabien Comte 2014-09-17 07:42:12 -06:00
Gregory Nutt
e57d2e5460 SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte 2014-09-08 06:14:59 -06:00
Gregory Nutt
64ab35b399 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
1780810d3d Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
54fa3b0b59 Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
9aca0c1c84 Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
Gregory Nutt
9ad7dae4c1 Rename kufree to kumm_free for consistency with other naming 2014-08-31 16:15:11 -06:00
Gregory Nutt
5a488475a8 Rename kmemalign to kmm_memalign for consitency with other naming 2014-08-31 14:57:31 -06:00
Gregory Nutt
e3ff0689bb Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
ad9b3f8ab8 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
3b07378b38 NSH link management now works! The last fix was to the Ethernet drivers: They cannot disable clocking to the Ethernet blok on ifdown. Otherwise, we cannot communicate with the PHY 2014-08-17 17:54:46 -06:00
Gregory Nutt
004788d7c0 Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires 2014-08-17 16:51:56 -06:00
Gregory Nutt
e04ab2bcfc In order to get PHY interrupts, they must be enabled at the PHY (still don't get PHY interrupts) 2014-08-17 13:03:18 -06:00
Gregory Nutt
5ba42680ac For all SAM Ethernet, need to enable management interface before reading PHY regisers in IOCTL 2014-08-17 11:09:54 -06:00
Gregory Nutt
ab78e8a0c5 SAM3/4 Ethernet: Clone ioctl support from the SAMA5 2014-08-17 06:54:37 -06:00
Gregory Nutt
e1769b22f1 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
d798dd37a7 Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00