Support for the STMicroelectronics B-U585I-IOT02A development board. This
is a proof-of-concept port that demonstrates running NuttX as the
Non-Secure TrustZone domain companion to TrustedFirmware-M.
Signed-off-by: Michael Jung <mijung@gmx.net>
iSerialNumber field in the device descriptor can be used to determining the
board when multiple boards connected to the same host. So add feature to change
serial string by board unique ID dynamically.
To use this feature, user must be implement the board_usbdev_serialstr() logic.
refs #13909
includes following parts:
add support of sparc in arch/Kconfig
add support of sparc in boards/Kconfig
add sparc dir in arch, add sparc dir in boards
add support of sparc in libs/libc/machine
modify all the coding style problem about saprc
It’s an RP2040 based device with some interesting features:
+ small form factor (18x21.3mm)
+ 8 MByte Flash
+ RGB LED
+ Reset Button
+ USB-C
- reduced pin-header
Support in derived from: boards/arm/rp2040/raspberrypi-pico
Location: boards/arm/rp2040/pimoroni-tiny2040
This introduce common folder structre and rework scripts & tools
files. The linker scripts were reorganized to use best the current
infrastructure which uses a template to create a final samv7.ld
file based in the current SoC memories and bootloader definitions.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2.fix some files to fix compile warning
3.remove blueteeth header files, which are not used in nuttx core.
4.fix configs and add lost files
5.update defconfig, remove useless items
6.fix compile warning for nuttx phyplus
7.delete useless: ble, h4, zblue defconfig files form phyplus configure folder
8.fix file format check error on phyplus source code
9.fix phyplus kconfig param error
10.update configure file for nuttx
- Add defconfig and board specific files
- Create mpfs/common for code which is shared between MPFS boards.
- Add support for GPIO driven EMMCSD mux.
- Move DDR Libero definitions from arch to boards.
Signed-off-by: Jani Paalijarvi <jani.paalijarvi@unikie.com>
This command enables the application to perform the final steps of the
booting process prior to finally switching the execution to another
firmware image.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
BOARDIOC_SWITCH_BOOT is required to communicate the boot partition from
userspace (OTA subsystem) to board. It can be used to change the system
boot behavior. So it's useful for A/B boot or even single boot case.
For the board support A/B boot case:
1. Download the new image from the sever
2. Write the new image to the alternative partition
3. Call BOARDCTL_SWITCH_BOOT to the alternative system
For single boot partition case:
1. Download the new image from the sever
2. Call BOARDCTL_SWITCH_BOOT and reboot to a small system
3. Write the new image to the main partition in the small system
4. Call BOARDCTL_SWITCH_BOOT again to the main system
Change-Id: Ifebb495784ecf06842946a249bec64f75dce894f
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
Support for the STMicroelectronics STM32L562E-DK development board. This
is a proof-of-concept port that demonstrates running NuttX as the
Non-Secure TrustZone domain companion to TrustedFirmware-M.
Signed-off-by: Michael Jung <mijung@gmx.net>
The QuickFeather board added as an initial target.
These featrues are minimally implemented:
* Clock Configuration -- All clocking registers are defined and
configuration is used to setup the HSO, M4 Core, and M4 Perif
clocks. Additionally some clock debugging is stubbed for
bringing out clock paths to IO pins.
* UART -- The lowputc as well as the serial driver is implemnted
for the single UART device. Currently the configuration is
hard coded, but uses the proper interfaces to later fill in.
* SysTick -- The system tick timer is implemented and clocking
properly. Tickless mode is not yet implemented.
* Interrupts -- The interrupt system is implemented and verified
using the UART and SysTick systems.
* GPIO -- GPIO and IOMUX systems are defined and implemented.
This is verified using the UART as well as the Arch LED
system. The GPIO interupt system is stubbed out but not
implemented.
* Arch LEDS -- The blue LED as part of the RGB LED is configured
and attached to the Arch LED system. This indicates the device
coming online as well as when a hardfault is triggered.
Applications and Testing:
* There is a nsh configuration implemented that includes debug
features as well as the ostest, getprime, and mem test.
All of these have been run and verified.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Add support for the STM32G474 family of microcontrollers and the
B-G474E-DPOW1 Discovery Board, which features a STM32G474RET6.
This is a major pull request as it adds support for an entirely
new family of STM32. This support is implemented in
arch/arm/src/stm32 and shares implementation with other STM32
families supported by that code, such as the 'L15xx, 'F10xx,
'F20xx, 'F3xxx, and 'F4xxx.
boards/Kconfig:
* Make NuttX recognize the existence of b-g474e-dpow1,
the B-G474E-DPOW1 Discovery Board.
boards/arm/stm32/b-g474e-dpow1/Kconfig:
boards/arm/stm32/b-g474e-dpow1/README.txt:
boards/arm/stm32/b-g474e-dpow1/configs/nsh/defconfig:
boards/arm/stm32/b-g474e-dpow1/include/board.h:
boards/arm/stm32/b-g474e-dpow1/scripts/Make.defs:
boards/arm/stm32/b-g474e-dpow1/scripts/ld.script:
boards/arm/stm32/b-g474e-dpow1/src/.gitignore:
boards/arm/stm32/b-g474e-dpow1/src/Make.defs:
boards/arm/stm32/b-g474e-dpow1/src/b-g474e-dpow1.h:
boards/arm/stm32/b-g474e-dpow1/src/stm32_appinit.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_autoleds.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_boot.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_userleds.c:
* Add minimal support for the B-G474E-DPOW1 Discovery
Board. The board boots successfully through to the
NSH prompt. NSH runs and is responsive.
With big thanks for detailed code review and suggestions:
David Sidrane (davids5)
Mateusz Szafoni (raiden00)
Abdelatif Guettouche (Ouss4)
* boards/arm/stm32/nucleo-f429zi: Initial port to nucleo-f429zi board.
* boards/arm/stm32/nucleo-f429zi: Add two demo configs.
* Add the nucleo-f429zi to boards/Kconfig
boards/Kcondig: Fixed line alignment issue.
* boards/arm/stm32/nucleo-f429zi: Change the license header of all new files to an Apache 2.0 license.
* boards/arm/stm32/nucleo-f429zi: nxstyle fixed
* arch: x86_64: Pour-in the x86_64 code from cRTOS repository, excluding modifications of NuttX kernel, jailhouse support and linux compatibility layer
* arch: x86_64: Refactor x86_64 loading procedure for better comprehension and included support for multiboot2
* arch: x86_64: Locate the kernel at 4GB~ and modify the page table initializing procedure accordingly
* arch: x86_64: Implemented kconfig option for various x86_64 capabilities, dynamic probe and check capability on lowsetup before enabling
* arch: x86_64: inte64_check_capability: Use Marco to prettify the capability checking procedure
* arch: x86_64: intel64_timerisr.c: Refactor with new frequency calibrating method
* arch: x86_64: Fix C alias of page table and GDT/IST
* arch: x86_64: Reload GTDR with GDT in high address in up_lowsetup
* arch: x86_64: Consolidate MSR definition in arch/arch.h
* arch: x86_64: Edit the way of handling GDT/IST in C into structures
* arch: x86_64: Correct the starting point of isr/irq stack
* arch: x86_64: Update up_initialize.c with the new initializing procedure
* arch: x86_64: up_map_region now take flags instead of assuming WR/PRESENT
* arch: x86_64: Overhual of interrupt initialization procedure
* arch: x86_64: Properly configure the heap to be memory as [_ebss, end of memory]
* arch: x86_64: Try to probe the TSC frequency, fall-back to user specified frequency on failure
* arch: x86_64: Remove debug printing during restore_aux, causing infinite CTX bug
* arch: x86_64: for X86 16500 serial interrupt to work, OUT2 of MCR must be 1. Make it stuck at 1 after boot
* arch: x86_64: Correctly apply license header, comment and format code
* arch: x86_64: properly send a SIGFPE on floating point error
* arch: x86_64: Remove unused variable in up_restore_auxstate
* arch: x86_64: properly trash the processor with an infinite loop
* arch: x86_64: Fix typo in ISR handler causing ISR not handled
* arch: x86_64: Fix possibile race conditions with scheduler debug option on in signal handling path
* arch: x86_64: Fix typo in MSR_X2APIC_LVTT_TSC_DEADLINE
* arch: x86_64: Migrate tickless implementation to the new MSR naming and frequency calibration method
* board: x86_64: qemu: Add guard to exclude up_netinitialize when compiling without net support
* arch: x86_64: update defconfigs
* arch: x86_64: rename qemu as qemu-intel64
* arch: x86_64: update Board readme
* S32K add support for Nxp drone boards
* Update arch/arm/src/s32k1xx/hardware/s32k1xx_rtc.h codestyle
Co-Authored-By: David Sidrane <David.Sidrane@Nscdg.com>
Co-authored-by: Jari van Ewijk <jari.vanewijk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com>
to fix the follow error:
Refresh z16f2800100zcog/nsh
LN: include/arch to arch/z16/include
LN: include/arch/board to /workspace/mirtos/nuttx/boards/z16/z16/z16f2800100zcog/include
No directory at /workspace/mirtos/nuttx/boards/z16/z16/z16f2800100zcog/include
to fix the follow error:
Refresh us7032evb1:nsh
LN: include/arch to arch/renesas/include
LN: include/arch/board to /workspace/mirtos/nuttx/boards/renesas//us7032evb1/include
No directory at /workspace/mirtos/nuttx/boards/renesas//us7032evb1/include
to fix the follow error:
Refresh skp16c26/ostest
LN: include/arch/board to /workspace/mirtos/nuttx/boards/renesas/m32262f8/skp16c26/include
LN: include/arch/chip to arch/renesas/include/m32262f8
fix the follow error:
Refresh demo9s12ne64/ostest
LN: include/arch/board to /workspace/mirtos/nuttx/boards/hc/mcs92s12ne64/demo9s12ne64/include
LN: include/arch/chip to arch/hc/include/mcs92s12ne64
No directory at /workspace/mirtos/nuttx/arch/hc/include/mcs92s12ne64
Author: Alan Carvalho de Assis <acassis@gmail.com>
Run nxstyle against .c .h files and fix it
Author: Adam Feuer <adam@starcat.io>
Summary
Adds CDC ECM Ethernet over USB High Speed for SAMA5D36-Xplained
(and maybe other boards) (most of the code was there already,
but didn't work out of the box for the SAMA5D36-Xplained)
Only SAMA5D36-Xplained has been tested so far
Impact
None if you don't use the CDC ECM Ethernet driver
On SAMA5D36-Xplained, this adds high-speed Internet connectivity
over USB 2.0 High Speed. via the USB CDC ECM Gadget driver.
It may work on other boards too.
This also fixed full-speed (low-speed) mode for the board too.
Limitations
Hasn't been tested on anything other than SAMA5D36-Xplained board.
TODO
Ideally this would include a composite RNDIS device so it would
also work seamlessly on Windows. That is for a future PR
Ideally this would include software to help configuration via
mDNS/DNS-SD for plug and play compatibility with Linux and macOS.
That is for a future PR.
Detail
Only a few lines of C driver code needed to be changed, since the
capability was there already. The rest is config and documentation.
Changes the SAMA5D3-Xplained board bringup to match the SAMA5D3-EK
board bringup
A helper script to configure Linux routing and iptables NAT is also
provided, along with documentation on how to use it.
Testing
Manual, on a Ubuntu Linux 19.10 system and MacOS 10.14.6 Mojave
MacBook Pro.
How To Verify
Follow the new CDC ECM Ethernet over USB instructions in the board
README.txt file
Commits:
remove non-UTF-8 chars in comment and reformat
removed unneeded comment markers
instructions for using the defconfigs
removed EMAC from config
- to prove this example only needs the CDC ECM Ethernet over USB to work
added CDC-ECM Ethernet over USB info to README
added U-Boot image
added netusb helper script
- this can configure the Linux network interface and routes
so you can ping or access the NuttX system via TCP/IP.
renamed defconfig dirs to be ethernet-over-usb
- was usb-over-ethernet which is not right
added USB DMA to defconfigs
updated readme with autoboot and debugging info
bringing ethernet-over-usb examples into parity
added cdc ecm ethernet over usb with telnetd config
added defconfig
only use phy interrupt if netdevices is ethernet
- because now netdevice could be CDC ECM ethernet over usb
which has no PHY interrupt
add bringup to Makefile
add bringup
app init cleanup
init cdc ecm driver and rndis driver; some cleanup
fixed some typos and odd characters
usb over ethernet working over usb 2.0 hs
Run all .c and .h files in last PR through nxstyle.
Author: macman88 <jjlange91@gmail.com>
SAME5x Ethernet Support (#25)
boards/arm/samd5e5/same54-xplained-pro/: Adds basic support for Microchip SAM E54 Xplained Pro board.
arch/arm/src/samd5e5/: Adds an Ethernet driver for the SAME5x family (based on the SAMA5 GMAC driver).
Author: Gregory Nutt <gnutt@nuttx.org>
Run all .c and .h modified in PR through nxstyle.
Author: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
feature k210 (#16)
* arch: risc-v: Add support for __LP64__ to types.h
* arch: risc-v: Add support for RV64GC to common files
* arch: risc-v: Add support for Kendryte K210 processor (RV64GC)
* boards: risk-v: Add support for Sipeed Maix Bit with K210
* tools: Add support for Kendryte K210 processor
nrf52 updates
board/arm/nrf52/nrf52832-dk: use the on-board virtual COM pins as default UART0 configuration
board/arm/nrf52: initial support for the nrf52840-dk board
board/arm/nrf52: initial support for the nrf52840-dk dongle board
arch/arm/src/nrf52: add support for port 1 GPIO
arch/arm/src/nrf52: initial support for UART1
arch/arm/src/nrf52: add UICR definitions
Approved-by: Gregory Nutt <gnutt@nuttx.org>
HiFive1 with qemu
* arch: risc-v: Add include/.gitignore
* arch: risc-v: Add src/.gitignore
* arch: risc-v: Remove uncommon function prototypes in include/irq.h
* arch: risc-v: Add missing symbols and function prototypes in src/common/up_internal.h
* arch: risc-v: Add src/common/up_modifyreg32.c
* arch: risc-v: Enable include Make.dep in src/Makefile
* arch: risc-v: Fix stack coloration in common/up_createstack.c
* arch: risc-v: Add common/up_puts.c
* arch: risc-v: Add common/up_checkstack.c
* arch: rv32im: Move all logics from up_dumpstate.c to up_assert.c
This change is same as other architectures like arm/src/armv7-m
* arch: Select ARCH_HAVE_STACKCHECK for RISC-V in Kconfig
* arch: risc-v: Add SiFive fe310 processor
NOTE: Currently only tested with qemu
* boards: hifive1-revb: Add SiFive hifive1-revb board
NOTE: Currently only tested with qemu
* tools: Add fe310 processor to configure.sh
Approved-by: Alan Carvalho de Assis <acassis@gmail.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
boards/arm/stm32h7/stm32h747i-disco: Remove references to nucleo in the stm32h747i-disco board.
arch/arm/include/stm32h7, arch/arm/src/stm32h7, and boards/arm/stm32h7/stm32h747i-disco: Add support for the STM32H747I-DISCO board.
board/boarctl.c: Add support for the new BOARDIOC_ROMDISK command. This allows applications to create ROMFS block drivers without illegal direct calls to romdisk_register.
include/sys/boardctl.h: Add basic definitions to support a ROM disk creation boardctl() command.
