sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3,179 Commits 1 Branch 0 Tags 291 MiB
16c1405a70
Commit Graph

175 Commits

Author SHA1 Message Date
Gregory Nutt
04f59f1761 Update README files 2014-08-12 10:01:12 -06:00
Gregory Nutt
cff5132179 SAMA5: Enable the 32.768 crystal if SCHED_TICKLESS is selected 2014-08-11 14:29:43 -06:00
Gregory Nutt
86ebe4725b Updated README files 2014-08-10 20:02:45 -06:00
Gregory Nutt
3985dc9120 Cosmetic changed, updated README files, improved comments 2014-08-10 13:11:31 -06:00
Gregory Nutt
9b76a1b758 Update README files 2014-08-10 11:34:20 -06:00
Gregory Nutt
1ff92f2f95 SAMA5D3 HSMCI: TX DMA is again disabled 2014-08-05 07:07:39 -06:00
Gregory Nutt
8d13a7cfcd WM8904: Update READMEs and defconfigs to last tested configuration 2014-08-04 15:36:16 -06:00
Gregory Nutt
66c4db92d4 Add debug logic to dump WM8904 registers 2014-08-01 18:07:20 -06:00
Gregory Nutt
2e77455c6f SAMA5 SSC: Start Delay is now configurable 2014-08-01 14:10:37 -06:00
Gregory Nutt
67792ef05b SAMA5 SSC: Frame Synch Delay is now configurable 2014-08-01 12:25:31 -06:00
Gregory Nutt
906edfef85 Updated README 2014-07-31 15:00:24 -06:00
Gregory Nutt
986fd56650 SAMA5D3x-EK NxPlayer: Updated Configuration 2014-07-31 11:32:44 -06:00
Gregory Nutt
0fb3f7803c SAMA5D3X-EK: Add support for the WM8904 audio CODEC 2014-07-31 11:14:57 -06:00
Gregory Nutt
2b0c56a31d SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller. 2014-07-30 11:20:06 -06:00
Gregory Nutt
42b28ba383 SAMA5D4: Add auto-mounter support for HSMCI0 2014-07-29 15:34:31 -06:00
Gregory Nutt
3e49c4c510 SAMA5D4 NxWM: Configuration now has the audio subsystem and the NxPlayer enabled 2014-07-23 15:20:54 -06:00
Gregory Nutt
8edc57137c SAMA5D3/4: All configurations. I suspect a MMC/SD multi-block DMA transfer issue. So for name, this feature is disabled in all configurations 2014-07-23 07:58:10 -06:00
Gregory Nutt
63196bb13d NxWM: Add 47x49 calculator icon 2014-07-13 09:58:50 -06:00
Gregory Nutt
0222f5816f Fixes for clean NxWM build; Updated README files 2014-07-10 15:29:41 -06:00
Gregory Nutt
06f8b5a613 Update README's to document the new SAMA5D4-EK NxWM configuration 2014-07-10 14:10:36 -06:00
Gregory Nutt
94ed3a6f51 SAMA5D4-EK: Add options to support an LCD 2014-07-08 12:46:18 -06:00
Gregory Nutt
285f66a2c1 NET: Rename uiplib/UIPLIB to netlib/NETLIB 2014-07-02 16:04:25 -06:00
Gregory Nutt
234d118c61 SAMA5D4-EK: NSH configuration now supports the RTC 2014-06-29 07:40:37 -06:00
Gregory Nutt
caf1b2d641 SAMA5D4-EK: NSH confuration now has FAT/ROMFS, /dev/zero, /dev/random via TRNG, an NSH startup script, and a RAM disk at /tmp 2014-06-28 16:11:41 -06:00
Gregory Nutt
57da49beb3 SAMA5D4-EK: Update pins used by HSMCI 2014-06-11 14:45:01 -06:00
Gregory Nutt
1634a11bd0 SAMA5D3/4: More renaming. Change SAMA5D3 EMAC to EMACA and SAMA5D4 to EMACB so that the configuration and build system can configure them. I might come up with something better later 2014-06-10 17:40:25 -06:00
Gregory Nutt
ae142009da SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently 2014-06-09 12:16:16 -06:00
Gregory Nutt
ae01e0819d SAMA5: Cosmetic clean-up of README files 2014-06-04 17:02:30 -06:00
Gregory Nutt
70207e05e3 SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC 2014-06-04 12:04:24 -06:00
Gregory Nutt
5eb9ee30dd Updated README files 2014-04-16 16:41:47 -06:00
Gregory Nutt
51950d7850 Undefine IRQPRIO in all configurations it should not be set 2014-04-16 08:29:39 -06:00
Gregory Nutt
4ea66ca8e4 SAMA5D3x-EK: Updates to README.txt 2014-04-12 08:00:37 -06:00
Gregory Nutt
cecf3775e2 SAMA5: The PIO used for the red LED is also used as the camera module reset line: Added a configuration option to suppress use of the red LED if the PIO is used for another purpose. Reported by David Sidrane. 2014-04-11 15:57:35 -06:00
Gregory Nutt
069ea487ae Long needed clean up of DNS resolver for coding style and naming conventions 2014-04-11 12:25:32 -06:00
Gregory Nutt
724ad8d7b5 Updated README files and comments 2014-04-07 07:43:28 -06:00
Gregory Nutt
26ea8a3d1d updated README 2014-04-04 17:13:55 -06:00
Gregory Nutt
c3c5633419 SAMA5: Fix some issues with SDRAM at 528MHz CPU clock 2014-04-04 11:37:39 -06:00
Gregory Nutt
3f936c415f SAMA5: Cosmetic updates to comments and README files 2014-04-03 15:30:00 -06:00
Gregory Nutt
a23fc8cc56 Updated comments and README 2014-04-02 09:03:29 -06:00
Gregory Nutt
015c911b8b SAMA5 DBGU: Add logic to suppress DBGU reconfiguration when started from a bootloader 2014-04-02 09:03:27 -06:00
Gregory Nutt
13295a6a1b Top level make will now generate a U-Boot uImage file 2014-04-01 11:56:58 -06:00
Gregory Nutt
dd094828ec SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console 2014-04-01 11:24:15 -06:00
Gregory Nutt
eb74d08118 Cosmetic update to comments and README files 2014-03-31 17:25:39 -06:00
Gregory Nutt
cd2c436f96 Cosmetic updates to comments and README files 2014-03-31 15:10:15 -06:00
Gregory Nutt
cdcf4f3ad6 Costmetic fixes to README and some comments 2014-03-30 11:34:18 -06:00
Gregory Nutt
b0c302ea06 Add instructions for running NuttX from NAND or TFTP 2014-03-30 10:25:44 -06:00
Gregory Nutt
8068bc46b1 Fix some backward conditional compilation 2014-03-30 08:29:21 -06:00
Gregory Nutt
5215080188 SAMA5D3x-EK: Change name of all board-specific configuration variables so that there are no collisions with names of similar variables for other boards 2014-03-30 07:26:38 -06:00
Gregory Nutt
2a3a6bca97 configs/sama5d3x-ek: Fix some typos 2014-03-28 15:18:49 -06:00
Gregory Nutt
0cefef9cb5 Documentatin updated; fix errors in some comments 2014-03-28 09:52:07 -06:00