Gregory Nutt
|
16ece4e4bc
|
PIC32MZ: PPS needs to start from the SFR base address. Fix from Kristopher Tate
|
2015-03-22 08:13:28 -06:00 |
|
Gregory Nutt
|
f172c0b17f
|
Fix backward help instructions in a Kconfig file
|
2015-03-21 17:02:15 -06:00 |
|
Gregory Nutt
|
0a13a27fca
|
More changes for PIC32MZ build under XC32
|
2015-03-21 16:38:24 -06:00 |
|
Gregory Nutt
|
4726c1e460
|
PIC23MX Starter Kit: Looks like we need to use a different linker script with Pinguino
|
2015-03-21 15:40:22 -06:00 |
|
Gregory Nutt
|
7d14b172ce
|
SAMV7: A little more USB-related stuff
|
2015-03-21 08:54:01 -06:00 |
|
Gregory Nutt
|
948531c352
|
SAMV7: Add configuration logic and clock setup for USB device
|
2015-03-21 07:28:59 -06:00 |
|
Gregory Nutt
|
36c523bd9d
|
SAMA5: Fix a typo in the Kconfig file
|
2015-03-21 06:22:04 -06:00 |
|
Gregory Nutt
|
e835af5840
|
SAMV7: Add USBHS register defintiion header file
|
2015-03-20 14:08:33 -06:00 |
|
Gregory Nutt
|
e68baa3073
|
Include chip/sam_spi.h in sam_spi.h
|
2015-03-20 11:09:36 -06:00 |
|
Gregory Nutt
|
5b3fe34ffb
|
SAMA5D3: Fix typos in timer/counter header file. From Bob Doiron
|
2015-03-20 09:19:10 -06:00 |
|
Gregory Nutt
|
db52134d47
|
STM32 RTC lower-half: Fix some errors that cause compilation failures. From shilo.xyz
|
2015-03-19 12:56:47 -06:00 |
|
Gregory Nutt
|
e319870ac9
|
SAMV5 EMAC: A few more fixes. Neccessary but not sufficient
|
2015-03-19 08:54:50 -06:00 |
|
Gregory Nutt
|
6db55da159
|
SAMV7 Ethernet: Fix an order problem that left RX and TX disabled
|
2015-03-18 18:07:07 -06:00 |
|
Gregory Nutt
|
fb3fe58b58
|
SAMV7: Add a sneak internal interface that will allow us to set the MAC address before NSH even starts
|
2015-03-18 17:23:40 -06:00 |
|
Gregory Nutt
|
7e95bfe8d0
|
SAMV7: Updates to Ethernet driver based on comparison with Atmel sample code. Add configuration for other PHY GPIOs. Still no Ethernet interrupts
|
2015-03-18 15:55:00 -06:00 |
|
Gregory Nutt
|
000381db37
|
PIC32MZ: Changes that will permit building of the PIC32MZ Start Kit configuration using MPLAB and the XC32 toolchain. From David Sidrane
|
2015-03-17 14:50:11 -06:00 |
|
Gregory Nutt
|
824f486bdf
|
SAMV7 Ethernet: Support getting IP address from the XULT AT24 EEPROM
|
2015-03-17 14:29:41 -06:00 |
|
Gregory Nutt
|
4ce927168f
|
SAMV7 EMAC: Fix range of MCK dividers
|
2015-03-17 11:19:46 -06:00 |
|
Gregory Nutt
|
ae433eaa84
|
SAMV7: Use D-Cache clean/flush/invalidate by range in EMAC and XDMAC drivers
|
2015-03-17 09:28:27 -06:00 |
|
Gregory Nutt
|
108f722626
|
Break ARMv7E-M cache operations into separate files; Finish the unimplemented cache operations
|
2015-03-17 08:48:41 -06:00 |
|
Gregory Nutt
|
a590bdc737
|
SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling
|
2015-03-16 13:51:37 -06:00 |
|
Gregory Nutt
|
8a73d9b8ea
|
SAMV7: Add Ethernet MAC register definition header file
|
2015-03-16 11:46:20 -06:00 |
|
Gregory Nutt
|
83a17af442
|
This commit enables HSMCI functionality in the SAMV71-XULT. TX DMA is, unfortunately, currently disabled.
|
2015-03-15 12:17:39 -06:00 |
|
Gregory Nutt
|
db2d9abcfa
|
SAMA5: Fix a bug in SAMA5 HSMCI. The bitfield mask and shift values were reversed resulting in a trashed value for the number of blocks in the BLOCKR register. This was sufficient to prevent DMA writes from working.
|
2015-03-15 09:35:48 -06:00 |
|
Gregory Nutt
|
c638c67ad4
|
Add umount2(). umount() is now a macro that just calls umount2() with flags = 0.
|
2015-03-14 16:48:45 -06:00 |
|
Gregory Nutt
|
88d3eab435
|
SAMV7 XDMA: Fix a problem with invalidating the cache on RX DMA
|
2015-03-14 15:25:32 -06:00 |
|
Gregory Nutt
|
801d556452
|
EFM32: Add I2C driver. From Pierre-noel Bouteville
|
2015-03-14 14:47:53 -06:00 |
|
Gregory Nutt
|
b24ad6ae63
|
SAMV7: More SDRAM logic. It does still does not work
|
2015-03-14 13:27:00 -06:00 |
|
Gregory Nutt
|
fe09227cd5
|
SAMV71-XULT: Add support for SDRAM (unverified)
|
2015-03-14 11:00:46 -06:00 |
|
Gregory Nutt
|
2976594cfe
|
Include correct chip file
|
2015-03-14 09:15:11 -06:00 |
|
Gregory Nutt
|
c32190c58d
|
SAMV7: Add SDRAMC register definition header file
|
2015-03-14 09:13:51 -06:00 |
|
Gregory Nutt
|
6b1202d17f
|
SAMV7 HSMCI: Change system bus interfaces seems to eliminate DMA failures.
|
2015-03-13 14:35:36 -06:00 |
|
Gregory Nutt
|
c2049956a4
|
Minor updates from initial debugging.
|
2015-03-13 13:46:27 -06:00 |
|
Gregory Nutt
|
0cae7563e8
|
SAMV7 HSMCI: Reading response registers at the wrong time can cause loss of response data.
|
2015-03-13 12:46:33 -06:00 |
|
Gregory Nutt
|
cbfe1c7699
|
SAMV7: Fix some cloning errors. SAMA5->SAM7
|
2015-03-13 10:38:10 -06:00 |
|
Gregory Nutt
|
a08378ce72
|
Fix a typo in a Cortex-M7 address
|
2015-03-13 10:37:21 -06:00 |
|
Gregory Nutt
|
265af48120
|
STM32 serial: Make input hardware flow-control work with RX DMA. From Jussi Kivilinna
|
2015-03-13 07:18:21 -06:00 |
|
Gregory Nutt
|
b8476c7ee8
|
STM32: Fix RX DMA setup for UART5. From Jussi Kivilinna.
|
2015-03-13 07:06:46 -06:00 |
|
Gregory Nutt
|
8f59fc8f64
|
SAMV7: Quick'n'dirty port of the SAMA5 HSMCI driver to the SAMV7
|
2015-03-12 18:03:41 -06:00 |
|
Gregory Nutt
|
0d79e315fd
|
SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out.
|
2015-03-12 16:00:38 -06:00 |
|
Gregory Nutt
|
26cf5a35a9
|
SAMV71-XULT: Enable I2C and the I2C tool in the NSH configuration
|
2015-03-12 12:27:06 -06:00 |
|
Gregory Nutt
|
9b6c7661a4
|
SAMV7: Add TWI/I2C driver (untested)
|
2015-03-12 10:58:11 -06:00 |
|
Gregory Nutt
|
ca48fbfc4a
|
SAMV7: Add SPI header files and driver
|
2015-03-12 09:12:37 -06:00 |
|
Gregory Nutt
|
f8c73c3499
|
stm32: usbdev: Fix stale initialization invalidating later NULL check. From Juha Niskanen
|
2015-03-12 08:08:50 -06:00 |
|
Gregory Nutt
|
47b225848d
|
ARMv7-M MPU. Bad syntax will cause failure to write the correct value to the MPU_RASR register. From Juha Niskanen
|
2015-03-12 08:00:53 -06:00 |
|
Gregory Nutt
|
6511afa1c2
|
stm32_i2c: Add missing NULL check. From Juha Niskanen
|
2015-03-12 07:53:41 -06:00 |
|
Gregory Nutt
|
8d31651a1b
|
Bringing PPPD yet closer to the NuttX coding style
|
2015-03-11 18:47:04 -06:00 |
|
Gregory Nutt
|
a4f1c636a3
|
SAMV7-XULT: Integrate button support and apps/examples/buttons into the NSH configuration
|
2015-03-11 14:41:58 -06:00 |
|
Gregory Nutt
|
a47d2eecce
|
SAMV7: Correct low-level console output
|
2015-03-11 14:39:32 -06:00 |
|
Gregory Nutt
|
d8a99fb73f
|
SAMV71-XULT: Enable 64-bit floating point support
|
2015-03-11 12:30:14 -06:00 |
|