Gregory Nutt
d824223736
SAMV7 MCAN: Fix uninialize configuration value
2015-08-05 09:16:16 -06:00
Gregory Nutt
ba23314cbf
Merge remote-tracking branch 'origin/master' into mcan
2015-08-05 08:57:29 -06:00
Gregory Nutt
f986d08515
SAMV71: Fix error in GPIO interrupt numbering
2015-08-05 08:57:05 -06:00
Gregory Nutt
4db9f276e6
SAMV7 MCAN: Fix some compilation errors when CAN debug is enabled
2015-08-05 08:21:32 -06:00
Gregory Nutt
92f5bf01c3
SAMV7 MCAN: Correct some compile errors when only MCAN1 is enabled
2015-08-05 08:07:25 -06:00
Gregory Nutt
1a93dadf26
SAMV7 MCAN: Fix some compilation warnings (some of which are real coding errors).
2015-08-05 07:29:20 -06:00
Gregory Nutt
c30cfe2025
SAMV7 MCAN driver is code complete (with some missing functionality)
2015-08-05 07:09:29 -06:00
Gregory Nutt
c8923bb6fc
SAMV7 MCAN: Finish some TX FIFO status methods; Correct interpretation of DLC in CAN_FD mode
2015-08-04 17:19:47 -06:00
Gregory Nutt
a64398c86b
SAMV7 MCAN: Minor correcting to message size calculation
2015-08-04 14:05:07 -06:00
Gregory Nutt
bb32aa8d24
SAMV7 MAN: Flesh out interrupt logic; add RX message handling logic
2015-08-04 13:51:34 -06:00
Gregory Nutt
62a9aed53a
SAMV7 MCAN: Add logic to send messages usign the TX FIFOQ
2015-08-04 11:41:38 -06:00
Anton D. Kachalov
a8fc587d87
Fixup operation mode set
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-08-04 20:28:43 +03:00
Gregory Nutt
f7350568f3
STM32 ADC changes suggested by Max Kriegleder
2015-08-04 06:29:40 -06:00
Gregory Nutt
4e2a95c71e
SAMV7 MCAN: Add some default values of configuration settings
2015-08-03 19:21:43 -06:00
Gregory Nutt
949cea035c
Fix a spelling error
2015-08-03 13:53:53 -06:00
Gregory Nutt
e89d8c4a5f
SAMV7 MCAN: Remove SAMA5 kruft; beginning of some interrupt logic
2015-08-03 13:50:02 -06:00
Gregory Nutt
bf8230d7b4
SAMV7 MCAN: Update some register debug output
2015-08-03 10:02:18 -06:00
Gregory Nutt
d53f6b9353
SAMV7 MCAN: Finishes most of the initalization logic
2015-08-03 09:10:38 -06:00
Gregory Nutt
2b76d57c30
Merged in rnouse/nuttx-arch (pull request #3 )
...
Add custom IOCTL for UART port
2015-08-03 06:48:04 -06:00
Anton D. Kachalov
19d8b4c46e
Add custom IOCTL for UART port
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-08-03 15:34:29 +03:00
Gregory Nutt
cabe75a51d
SAMV71 MCAN: Add some mode-related initialization logic
2015-08-02 14:51:01 -06:00
Gregory Nutt
f5e7dd777e
SAMV7 MCAN: Add logic to configure clocking and message RAM addresses
2015-08-02 13:25:14 -06:00
Gregory Nutt
fe211d1b88
SAMV7 MCAN: remove old AUTOBAUD option; add a local LOOPBACK option
2015-08-02 11:18:51 -06:00
Gregory Nutt
d97c0db228
SAMV7 MCAN: Correct name of pin configurations
2015-08-02 10:58:04 -06:00
Gregory Nutt
269180e19d
SAMV71 MCAN: message RAM configuration
2015-08-02 10:37:54 -06:00
Gregory Nutt
1aac62cce3
SAMV71 MCAN: Fix base address
2015-08-02 10:09:24 -06:00
Gregory Nutt
34c3c780e1
SAMV71 MAN configuration data
2015-08-02 10:08:18 -06:00
Gregory Nutt
a5755cb378
SAMV71 MCAN: Add range checking of configuration setting
2015-08-01 15:57:06 -06:00
Gregory Nutt
a3ec0a1414
SAMV7: Complete MCAN configuration options
2015-08-01 12:40:18 -06:00
Gregory Nutt
6c9e8b5092
SAMV7 MCAN: Add some definitions for the PCK5 clock source and prescaler
2015-07-31 11:24:29 -06:00
Gregory Nutt
70f6e1e8bb
Merge remote-tracking branch 'origin/master' into mcan
2015-07-31 10:14:42 -06:00
Gregory Nutt
d9830da295
Fix naming of idempotency variable
2015-07-31 10:14:06 -06:00
Gregory Nutt
1638d61389
SAMV7 MCAN Driver. Initial commit is just the SAMA5 CAN driver with naming changes. It should not even compile yet
2015-07-31 10:11:01 -06:00
Gregory Nutt
ee72304b25
Newer 4.9 GCC does not permit both -mcpu= and -march= on the command line; either -mcpu= or -march= with -mtune. The latter gives me linking errors so all of the arguments committed to the former. Untested on more tools
2015-07-31 08:39:26 -06:00
Gregory Nutt
3139ce7808
Merged in rnouse/nuttx-arch (pull request #2 )
...
Fixup up_{enable,disable}_irq
2015-07-31 06:15:56 -06:00
Anton D. Kachalov
a191fd661e
Do not touch Mode/Level in irq_enable/disable
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-31 14:11:07 +03:00
Anton D. Kachalov
900ea68c41
Set Timer's IRQ Level/Mode during init
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-31 14:10:29 +03:00
Gregory Nutt
095d2d3eee
Fix a typo in the STM32 F2 DMA header file
2015-07-30 16:03:52 -06:00
Gregory Nutt
2c5a6831cd
ADC DMA should work on the F2 as well because the DMA is equivalent on the F2 and F4
2015-07-30 15:49:33 -06:00
Max Kriegler
9ed14b0924
STM32 ADC: Add DMA support for the STM32 F4 family. From Max Kriegler
2015-07-30 08:47:45 -06:00
Juha Niskanen
7407e41569
Add CONFIG_ADC_NO_STARTUP support for STM32 F1 (untested)
2015-07-30 07:42:31 -06:00
Gregory Nutt
f795e386d7
moxART needs to select some architecture. Is ARM7TDMI close?
2015-07-29 20:41:05 -06:00
Gregory Nutt
5b46df9c49
Fix compile error from last ADC change
2015-07-29 17:37:35 -06:00
Gregory Nutt
0843af5367
Fixes that call sched_resume_scheduler and sched_suspend_scheduler must include nuttx/sched.h
2015-07-29 16:51:26 -06:00
Gregory Nutt
23ed19c514
Clean-up from last commit to make sure that all files have BSD licensed header with the correct authors and that the code conforms to the NuttX coding style
2015-07-29 13:52:23 -06:00
Anton D. Kachalov
b10095ed59
[arm/src/moxart/irq] irq_decode: process one irq at once
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-29 19:13:47 +03:00
Anton D. Kachalov
ab27747484
[arm/src/moxart/irq] irq_decode: process several interrupts at once
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-29 19:13:47 +03:00
Anton D. Kachalov
ea6c65d813
[moxart/moxart_timer] Correct compare value for T1
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-29 19:13:47 +03:00
Anton D. Kachalov
309ee5d348
[moxart/moxart_irq] Cleanup includes
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-29 19:13:47 +03:00
Anton D. Kachalov
7f28335f81
[moxart/moxart_timer] Div clock by 8
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-29 19:13:47 +03:00
Anton D. Kachalov
46c8885814
[arm/moxart/moxart_irq] Typo fix
2015-07-29 19:13:47 +03:00
Anton D. Kachalov
75762f1519
Add support for MoxaRT
2015-07-29 19:13:47 +03:00
Juha Niskanen
3d32eb9465
tm32_adc: Add STM32L152XX ADC support
...
Porting from Thingsee OS.
Credits: Dmitry Nikolaev wrote most of the code, Teemu Pirinen from Offcode Ltd.
contributed support for changing single shot adc channel, minor tweeks by
Jussi Kivilinna and Juha Niskanen
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
Includes additional changes from review.
2015-07-29 08:34:27 -06:00
Gregory Nutt
032c237865
Minor modifications from review of previous commits
2015-07-29 08:34:01 -06:00
Gregory Nutt
90ac233e09
Minor modifications from review of previous changes
2015-07-29 08:32:23 -06:00
Juha Niskanen
ddc93995a0
chip/stm32_adc.h: Add defines for STM32L152XX ADC support
...
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2015-07-29 07:38:29 -06:00
Juha Niskanen
f4812bfbf9
stm32/chip: Add some STM32L15XX support bits (from Thingsee)
...
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2015-07-29 07:36:21 -06:00
Gregory Nutt
eddf8161a5
Add scheduler resume/suspend calls to all implementations of up_release_pending()
2015-07-26 10:13:29 -06:00
Gregory Nutt
37969b8279
Add scheduler resume/suspend calls to all implementations of up_reprioritize_rtr()
2015-07-26 09:46:28 -06:00
Gregory Nutt
838c5355eb
Correct resume scheduler hooks and add suspend scheduler hooks to all implementations of up_unblock_task
2015-07-26 09:07:47 -06:00
Gregory Nutt
a92c0a10ab
Add scheduler resume/suspend calls in all implementations of up_block_task()
2015-07-26 08:31:23 -06:00
Gregory Nutt
9d98177daa
Add logic to reset the replenish the sporadic scheduler when a task is resumed
2015-07-24 09:54:28 -06:00
Gregory Nutt
39192c3537
Fix a compile error found by tools/tesbuild.sh
2015-07-22 15:45:47 -06:00
Gregory Nutt
999452c3ae
Eliminate a warning detected by nuttx/tools/testbuild.sh
2015-07-22 14:11:10 -06:00
Gregory Nutt
ca203f6a4f
Fix warnings from the STM32F7 pinmap.h header file; add a .gitignore file
2015-07-22 11:00:41 -06:00
David Sidrane
778c630c6b
Add support for the STM32446. From David Sidrane
2015-07-22 07:26:53 -06:00
David Sidrane
092488cbd0
Make some STM32F7 pin naming more consistent
2015-07-21 15:33:56 -06:00
David Sidrane
e36ca25c5c
STM32: Fix incorrect naming of inclusion guard in IRQ header files
2015-07-21 12:25:15 -06:00
David Sidrane
e7d039ac2b
STM32: Fix incorrect naming of inclusion guard in IRQ header files
2015-07-21 11:30:45 -06:00
David Sidrane
5c5df7aefe
STM32 F229: Fix bad inclusion guard in a header file
2015-07-21 11:25:29 -06:00
Gregory Nutt
9c284bb05f
Syscall fixes: Add support for Cortex-M7; mount syscall has to be suppressed if there are no mountable file systems
2015-07-21 11:20:46 -06:00
Gregory Nutt
d2c8d4a495
Review/updated Cortex-M7 MPU definitions
2015-07-21 11:19:14 -06:00
Gregory Nutt
ba2046d0cd
STM32 F7: Port some F4 protected mode files to the F7
2015-07-21 07:59:20 -06:00
Max Neklyudov
b13e182099
Correct some problems with SAM3/4 watchdog driver. Includes some small improvements. From Max Neklyudov.
2015-07-21 07:15:39 -06:00
David Sidrane
e6216a9175
Correct some typos in the STM32 F7 RCC register definition header file. From David Sidrane.
2015-07-21 06:51:33 -06:00
Gregory Nutt
84ffc1fe2c
STM32 F7 Ethernet: Fix some backward conditinal compilation
2015-07-20 15:49:07 -06:00
Gregory Nutt
57191d15df
STM32 F7: Fix some errors in some macro definitions
2015-07-20 15:29:32 -06:00
Gregory Nutt
088d42a948
STM32 F7: Port the STM32 F7
2015-07-20 13:54:41 -06:00
Gregory Nutt
9737c6a0bc
STM32 F7 Ethernet: With these last changes, the STM32 F7 Ethernet driver is functional
2015-07-20 10:57:06 -06:00
Gregory Nutt
d406163a66
Refresh submodules; upated STM22F3 Ethernet debug output
2015-07-20 09:31:49 -06:00
Gregory Nutt
3fa40fd3c8
STM32 F7 Ethernet: RX/TX descriptors should be flushed to memory when they are first initialized
2015-07-20 07:05:35 -06:00
Gregory Nutt
bab4a5308a
STM32 F7 Ethernet: Add cache operations to make sure we have data coherency when accessing all DMA-related data
2015-07-19 17:04:43 -06:00
Gregory Nutt
2ce3c75264
STM32 F7 Ethernet: Add logic to align all DMA memory to the D-Cache line size
2015-07-19 16:35:25 -06:00
Gregory Nutt
c4d91c8c9f
Another FIX for gethostbyname if CONFIG_NETDB_DNSCLIENT is not defined
2015-07-19 14:45:34 -06:00
Gregory Nutt
a01ff4cb0b
STM32 F7: Fix a few of the many Ethernet compilation issues (still more)
2015-07-19 12:58:41 -06:00
Gregory Nutt
e5ea468d75
STM32 F7: Quick'n'dirty port of the STM32 F4 Ethernet driver. Does not yet even compile
2015-07-19 12:51:23 -06:00
Gregory Nutt
d748f1ac27
STM32 F7: Add Ethernet header file
2015-07-19 12:26:13 -06:00
Gregory Nutt
3150706ee4
STM32 F7: Add logic to enable I-/D-Cache, ITCM and DTCM
2015-07-19 10:43:26 -06:00
Gregory Nutt
be008484e7
STM32 F7: Port the STM32 F3 serial driver to the STM32 F7
2015-07-19 09:25:27 -06:00
Gregory Nutt
7241185e13
STM32 F7: Add DMA header files
2015-07-19 07:34:09 -06:00
Gregory Nutt
08c883b6e8
STM32 F7: Add low level serial console support
2015-07-18 16:24:02 -06:00
Gregory Nutt
d64058d36e
STM32 F7: Bring in other EXTI related files from STM32 F4
2015-07-18 16:00:00 -06:00
Gregory Nutt
5f9b0b3a2f
STM32 F7: Add USART/UART register definition
2015-07-18 15:58:59 -06:00
Gregory Nutt
12f04f8500
STM32 F7: Add heap initializatino logic; Clone the STM32 CCM allocator as the F7 DTCM allocator
2015-07-18 12:52:24 -06:00
Gregory Nutt
465d7fe8c5
STM32 F7: Add PWR register definitions
2015-07-18 11:55:35 -06:00
David Sidrane
5e1a50c93e
STM32: Oops. Some STM32 F7 edits accidentally went into STM32 files ;(. Fixed by David Sidrane
2015-07-18 11:05:44 -06:00
Gregory Nutt
4a5f66481d
STM32 F7: Add FLASH and SYSCFG header files
2015-07-18 10:06:44 -06:00
Gregory Nutt
4f307ba36a
STM32F7: Clone GPIO support from the STM32 F4
2015-07-18 08:34:07 -06:00
Gregory Nutt
9c78772fce
STM32 F7: Add RCC clock configuration logic from STM32 F429
2015-07-17 17:39:33 -06:00
Gregory Nutt
cbaf241078
STM32 F7: Fix input clock source to SysTick
2015-07-17 16:38:47 -06:00
Gregory Nutt
6f5aa9ae21
STM32F7: Add GPIO header files
2015-07-17 15:43:51 -06:00
Gregory Nutt
d722792487
STM32 F7: Add RCC header files
2015-07-17 13:52:10 -06:00
Gregory Nutt
f45f0ab59a
STM32 RCC: Fix some more typos in STM32 RCC header files
2015-07-17 12:16:29 -06:00
Gregory Nutt
bd711c038d
STM32 RCC: Fix what looks like a double paste
2015-07-17 12:00:46 -06:00
Gregory Nutt
7eb5e7f9ec
STM32F746G-DISCO: Getting closer to a build
2015-07-17 11:47:16 -06:00
Sebastien Lorquet
7f7082f938
Extend STM32 Ethernet operating frequency to 180MHz:
...
-Extend frequency range options to 180 MHz for STM32 ETH_MACMIIA_CR
-Fix a typo in a frequency range option in LPC43
-Only configure the PPS GPIO if the PTP protocol is enabled
From Sebastien Lorquet
2015-07-17 07:44:12 -06:00
Gregory Nutt
8e4f3bddb6
Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization
2015-07-17 07:20:16 -06:00
Gregory Nutt
a7a7ec8850
STM32 F7: Misc naming fixes
2015-07-16 19:49:20 -06:00
Gregory Nutt
3583f8c1dc
STM32 F7: Add more configuration selections
2015-07-16 18:30:40 -06:00
Gregory Nutt
05676a233c
STM32 F7: Add pin multiplexing definitions
2015-07-16 16:31:02 -06:00
Gregory Nutt
d8915e9dc6
Add include/chip.h definitions and configuration support for the STM32 F7
2015-07-16 08:47:25 -06:00
Gregory Nutt
eb64a6c238
Add STM32 F7 memory map header file
2015-07-15 16:24:03 -06:00
Gregory Nutt
2bdca23c92
STM32F7: Bring over a couple more Cortex-M7 files from SAMV7
2015-07-15 14:51:41 -06:00
Gregory Nutt
be16a06857
Create a src directory for the STM32F7 (not much in it yet)
2015-07-15 14:32:28 -06:00
Gregory Nutt
1ed5f5a3ed
STM32: Move STM32F42xxx IRQ definitions out of stm32f40xxx_irq.h into their own stm32f42xxx_irq.h header file
2015-07-15 13:52:20 -06:00
Gregory Nutt
629b37deec
STM32: Fix a minor error in new STMF42* header files
2015-07-15 13:21:39 -06:00
Gregory Nutt
abbfbb0716
STM32: Move STM32F42xxx vector definitions out of stm32f40xxx_vector.h into their own stm32f42xxx_vector.h header file
2015-07-15 13:02:55 -06:00
Gregory Nutt
0d0bbafbc5
STM32: Move STM32F42xxx SYSCFG definitions out of stm32f40xxx_syscfg.h into their own stm32f42xxx_syscfg.h header file
2015-07-15 12:54:15 -06:00
Gregory Nutt
7666fde938
STM32: Move STM32F42xxx RCC definitions out of stm32f40xxx_rcc.h into their own stm32f42xxx_rcc.h header file
2015-07-15 12:50:04 -06:00
Gregory Nutt
987c010c1f
STM32: Move STM32F42xxx DMA definitions out of stm32f40xxx_dma.h into their own stm32f42xxx_dma.h header file
2015-07-15 12:38:33 -06:00
Gregory Nutt
1d7789caa6
STM32: Move STM32F42xxx pinmap definitions out of stm32f40xxx_pinmap.h into their own stm32f42xxx pinmap.h header file
2015-07-15 12:28:45 -06:00
Gregory Nutt
3efe60bb6d
STM32 F7: Add interrupt vector definitions
2015-07-15 10:54:03 -06:00
Alan Carvalho de Assis
3f68755997
SAML21" Fix small typo. It should be 2-Wire I2C instead of 1-Wire. From Alan Carvalho de Assis.
2015-07-12 12:17:42 -06:00
Alan Carvalho de Assis
82fd1536a6
AMDL: Add support to Peripheral as Output with Read back. From Alan Carvalho de Assis.
2015-07-12 09:23:40 -06:00
Gregory Nutt
1f5e16dc95
Fix some warnings/errors detected by nuttx/tools/testbuilds.sh
2015-07-10 18:41:26 -06:00
Janne Rosberg
3fdfae16b7
samdl/sam_usb.h: fix USBDEV_CTRLB_SPDCONF defines Datasheet 03-2015 and 06-2015 is wrong. These defines are correct verified with analyser and also same values are used on Atmel xdk-asf-3.24.2 sources. From Janne Rosberg.
2015-07-10 15:23:41 -06:00
Janne Rosberg
02979feb7b
samdl/saml_usb.h: fix wrong EP offset calculation. From Janne Rosberg
2015-07-10 15:21:37 -06:00
Janne Rosberg
b32d747212
Fix some typos. From Janne Rosberg
2015-07-10 15:19:24 -06:00
Janne Rosberg
d6a51360f1
samdl: fix USBDEV_PKTSIZE_BCNT size. From Janne Rosberg
2015-07-10 15:15:55 -06:00
Alessandro Temil
d4cd35af5f
More changes to LPC3450 pin configuration: The hardware ETM pins will not toggle unless the SLEW FAST bit is set. From Alessandro Temil.
2015-07-09 13:36:22 -06:00
Alessandro Temil
d687bedf36
Correct some LPC4350 GPIO pin configurations. From Alessandro Temil
2015-07-09 12:09:00 -06:00
Gregory Nutt
56e4189a73
SAMD21: Correct some GCLK ID definitions for SERCOM
2015-07-06 09:26:49 -06:00
Gregory Nutt
ef5531b30b
SAMD21: Last fix to header files caused a compile problem because logic used a value which is no longer available for the SAMD21
2015-07-04 13:18:30 -06:00
Gregory Nutt
724c1eacaa
Add support for a BOARDIOC_RESET boardctl() command. Enable configuration options to support BOARDIOC_RESET for ARMv6-M and ARMv7-M
2015-07-04 10:39:24 -06:00
Gregory Nutt
36ddd9f691
Simulatin: Save the intial terminal mode and restore this before terminating. Otherwise, the NSH shutdown command leaves the console in raw mode
2015-07-04 08:43:10 -06:00
Gregory Nutt
749907cbbe
sim configuration: Add support for board_app_initialize() which is needed when CONFIG_LIB_BOARDCTL=y
2015-07-04 08:16:45 -06:00
Gregory Nutt
8db3a7a13e
Add a board_app_initilize() stub function needed by the simulatin when CONFIG_LIB_BOARDCTL=y
2015-07-04 07:35:14 -06:00
Gregory Nutt
37e681f89a
Implementment board_power_off() for the simulation platform.
2015-07-04 07:22:38 -06:00
Gregory Nutt
2e5bef56f2
SAMD20/1: Fix some typos found by inspecting header files
2015-07-04 07:19:52 -06:00
Gregory Nutt
6129df90d6
PIC32 USB device: Fix some backward conditional compilation; fix some warnings
2015-07-03 14:37:46 -06:00
Gregory Nutt
35bd9756ff
PIC32 SPI: Fix some backward conditional compilation
2015-07-03 14:36:56 -06:00
Gregory Nutt
e7177afca4
MIPS32 header: Missing comma in prototype. How did that happen
2015-07-03 14:36:19 -06:00
Gregory Nutt
b8976adfb3
SAM4L: GPIO interrupts are not yet supported; can't compile sam_gpioirq.c yet
2015-07-03 09:33:52 -06:00
Gregory Nutt
797aa0a138
Power off support now depends on CONFIG_ARCH_HAVE_POWEROFF
2015-07-03 06:53:51 -06:00
Gregory Nutt
004c076985
Correct some issues introduced in the last commit
2015-07-02 17:54:05 -06:00
Gregory Nutt
c3290fdabd
Modify board_power_off() so that is is called only via boardctl()
2015-07-02 17:09:54 -06:00
Gregory Nutt
19320d157a
Move prototype of board_power_off() to include/nuttx/board.h where it belongs
2015-07-02 16:25:31 -06:00
Gregory Nutt
51df91e93d
STM32 RTCC: Eliminate a warning when ALARM support is enabled
2015-07-02 15:02:59 -06:00
Gregory Nutt
1839d132f0
Add a dummy arch_invalidate_icache because for symmetry in the naming of cache operations
2015-07-02 11:13:23 -06:00
Gregory Nutt
46fec91b12
Remove a warning
2015-07-01 18:25:13 -06:00
Gregory Nutt
6df1d2823f
Fix misc. compilation error/warning detected by tools/testbuild.sh
2015-07-01 14:33:37 -06:00
Gregory Nutt
dbc5f910fc
Fix some typos in header files
2015-07-01 11:45:08 -06:00
Gregory Nutt
c73745bede
lpc214x USB device: Fix a warning
2015-07-01 10:25:14 -06:00
Gregory Nutt
d20dbf5054
LPC17xx: Fix a warning about an unused local variable
2015-07-01 09:36:39 -06:00
Gregory Nutt
92f9876f75
Fix a Cortex-A compilation error in the vfork() logic when system calls are enabled in modes other than CONFIG_BUILD_KERNEL.
2015-07-01 08:34:51 -06:00
Gregory Nutt
77285beeca
DM320: GIO header uses get/putreg functions and so should include up_arch.h
2015-07-01 08:01:49 -06:00
Gregory Nutt
a1676a177d
arch/arm/src/sama5/sam_ehci.c: Fix some bad conditional compilation that left a function undefined if CONFIG_USBHOST_ASYNCH is not selected.
2015-07-01 07:04:02 -06:00
Alan Carvalho de Assis
928c88a5f6
Port some per-process stack dumping logic from ARMv7-M to ARMv6-M. From Alan Carvalho de Assis
2015-06-30 11:42:48 -06:00
Alan Carvalho de Assis
39b77fbe8b
Fix Cortex-M0 assembly error when the interrupt stack is enabled
2015-06-30 08:41:47 -06:00
Gregory Nutt
fb926e7283
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
27bdf5d8a1
SAMD21: Update SPI and I2C header files for SAMD21 support
2015-06-22 13:12:00 -06:00
Max Neklyudov
8438b8eee8
SAM3/4: Add a TWI driver for the SAM4CM. From Max Neklyudov.
2015-06-22 09:32:15 -06:00
Gregory Nutt
911b1ce68e
SAMD21: Update WDT and EVSYS header files for SAMD21 support
2015-06-22 09:15:54 -06:00
Gregory Nutt
52803ee23b
Back out another error introduced with commit 02c33f66c5a8be774034cd40e4125e9323c7b4d8. Causes an infinite loop in up_lowputc().
2015-06-22 07:48:29 -06:00
Max Neklyudov
0f19a33b3d
SAM4CM: Fix SUPC register definitions. From Max Neklyudov
...
Remove conditional logic form non-SAM4CM parts (Gregory Nutt)
2015-06-22 06:52:57 -06:00
Max Neklyudov
e4d7b311b7
sam4cm: add CFB and MAC AES modes. From Max Neklyudov
2015-06-22 06:42:37 -06:00
Max Neklyudov
bdf0b6a9ab
Back out an error introduced with commit 02c33f66c5a8be774034cd40e4125e9323c7b4d8. Causes an infinite loop in up_lowputc(). From Max Neklyudov.
2015-06-22 06:19:45 -06:00
Gregory Nutt
c5bc7cc120
SAMD21: Update SAMD SYSCTRL and NVMCTRL definitions for the SAMD21
2015-06-21 11:40:23 -06:00
Gregory Nutt
e7e7b465d5
SAMD21: Update fuse definitions for the SAMD21
2015-06-21 10:20:23 -06:00
Gregory Nutt
4a38276ff9
SAMD21: Extend SAMD USART support to include SAMD21 differences
2015-06-21 09:17:01 -06:00
Gregory Nutt
780cb0911d
Add board configuration for the SAMD21 Xplained board
2015-06-21 07:48:46 -06:00
Gregory Nutt
379a1e114f
SAMD21: Add pin multiplexing definitions
2015-06-20 18:55:23 -06:00
Gregory Nutt
97d697f7c4
SAMD2x: Eliminate a warning
2015-06-20 16:06:01 -06:00
Gregory Nutt
5eeabf29dd
Missed a few in previous commit
2015-06-20 15:55:56 -06:00
Gregory Nutt
1d3abb18e4
SAMD21: Update GCLKs for SAMD21
2015-06-20 15:55:21 -06:00
Gregory Nutt
d9863f11f6
SAMD21: Update PM definitions for SAMD21 support
2015-06-20 15:32:57 -06:00
Gregory Nutt
28ae44eb02
SAMD21: Add memory map header file
2015-06-20 15:02:25 -06:00
Gregory Nutt
66a960dacd
SAMD21: Add interrupt vectors definitions
2015-06-20 14:40:47 -06:00
Gregory Nutt
15c8e2e00a
SAMD21: Add interrupt vectors definitions
2015-06-20 14:40:36 -06:00
Gregory Nutt
d00ed2d780
Add configuration support for SAMD21
2015-06-20 14:31:53 -06:00
Gregory Nutt
e013bb49a8
SAML21 USB: Add host side register defintiions
2015-06-20 11:09:35 -06:00
Gregory Nutt
d298b8048c
SAML21 USB: Add device side register defintiions
2015-06-20 09:25:06 -06:00
Gregory Nutt
b6629c0745
SAML21: Partial USB header file
2015-06-20 07:13:35 -06:00
Gregory Nutt
b39cd9ee93
Refresh SAMV71-Xult configurations
2015-06-17 12:01:33 -06:00
Gregory Nutt
ad7eb4e24f
Update some comments
2015-06-17 06:31:30 -06:00
Gregory Nutt
3c06202152
SAM4L DMA: Need separate peripheral IDs for TX and RX
2015-06-17 06:23:07 -06:00
Alan Carvalho de Assis
2a10db2dbf
SAMA5D TWI: Fix typo in driver initialization logic.
2015-06-17 06:13:46 -06:00
Gregory Nutt
a5175456ed
SAML21: Add OPAMP register definition header file
2015-06-16 15:54:49 -06:00
Gregory Nutt
61543db536
SAML21: Add DAC register definition header file
2015-06-16 13:32:27 -06:00
Gregory Nutt
5ee4cf6ae4
SAML21: Add AES register definition header file
2015-06-16 12:22:49 -06:00
Gregory Nutt
b5cc782205
SAML21 DMAC: Mostly cosmetic changes
2015-06-16 10:39:21 -06:00
Gregory Nutt
08dcb6dc8d
SAML21 DMA: Fix a logic error. Since the write back descriptors overly the base descriptors, we need to do some special things in order to correctly free any allocated descriptors
2015-06-16 10:07:26 -06:00
Gregory Nutt
12ca013ff4
SAMV7: Add RTC register definition header file
2015-06-16 07:23:47 -06:00
Gregory Nutt
b1230eb951
Fix a comment
2015-06-15 15:09:23 -06:00
Gregory Nutt
48b7631dbb
SAMV7: Add MCAN register definition header file
2015-06-15 11:37:59 -06:00
Gregory Nutt
9511364a03
SAML21 minor stuff
2015-06-14 14:27:58 -06:00
Gregory Nutt
01c5c63369
SAML21: Completes first rought cut of DMAC driver
2015-06-14 13:29:59 -06:00
Gregory Nutt
4f8db55462
SAML21 DMA: BASEADDR and WRBADDR can only be written while the DMAC is disabled
2015-06-14 11:46:44 -06:00
Gregory Nutt
fb6252aa6f
SAML21 DMA: More DMA logic. Still incomplete
2015-06-14 11:26:52 -06:00
Gregory Nutt
c2f2919ab0
SAML21 DMA: Add logic to set up base and writeback table addresses
2015-06-14 10:51:10 -06:00
Gregory Nutt
1f6f3d7bb2
Fix reversed arguments in SAML21 DMA logic
2015-06-14 08:52:39 -06:00
Gregory Nutt
75077f4728
SAML21: Add DMA descriptor management logic
2015-06-14 08:48:25 -06:00
Gregory Nutt
8c8b2d926b
SAMD21: Add build framework for DMA support. Nothing there yet except for skeletal logic taken from SAM3/4.
2015-06-13 15:06:37 -06:00
Gregory Nutt
26518df3ed
SAML21: Add DMAC register definition header file
2015-06-13 10:16:07 -06:00
Gregory Nutt
29136e51cc
Clean up and review of header files for conformance to standards
2015-06-12 19:26:01 -06:00
Gregory Nutt
c07a9632cc
Clean up and review of header files for conformance to standards
2015-06-12 19:17:42 -06:00
Gregory Nutt
7bd3d5eaf1
Clean up and review of header files for conformance to standards
2015-06-12 19:00:52 -06:00
Gregory Nutt
d6ce8220fd
Clean up and review of header files for conformance to standards
2015-06-12 18:07:47 -06:00
Gregory Nutt
46148524a9
SAM4S/4E: Eand default loop optimiozation if EEFC_FMR configuration. From Marco Aurélio da Cruz
2015-06-11 14:35:49 -06:00
Gregory Nutt
4b11c9da2c
Kinetis: Add up-sysemreset.c to Make.defs
2015-06-11 12:08:45 -06:00
Gregory Nutt
4712c23218
Make some imported files a little closer to the NuttX coding standard
2015-06-11 09:14:44 -06:00
Gregory Nutt
85d88d364f
Kinetis: Add logic to set CFM protect area to all 0xff in all configurations
2015-06-11 08:39:40 -06:00
Gregory Nutt
7fab748667
STL32 F15x: stm32_stdclockconfig() was calling stm32_pw_setvos() which accessed PWR_CR via an inactive APB. From Juha Niskanen.
2015-06-11 08:09:36 -06:00
Gregory Nutt
98b2034cdf
Teensy-3.1: Add user LED support
2015-06-10 17:19:26 -06:00
Gregory Nutt
ad2a529624
RAM functions should have noinline attribute
2015-06-10 14:51:42 -06:00
Gregory Nutt
cb1a6e7954
Cosmetic
2015-06-10 14:20:11 -06:00
Gregory Nutt
0742ee3c3e
Add support for MK20DN--VLH5 and MK20DX---VLH5. Needed for backward compatible support for Teensy-3.0
2015-06-10 11:45:17 -06:00
Gregory Nutt
075261f5ee
SAML21: Since SERCOM5 usese a different output channel, it will also need a different GCLK generator
2015-06-10 08:38:35 -06:00
Gregory Nutt
9be151cdbb
SAML21: A different SLOW clock must be used with SERCOM5
2015-06-10 08:18:05 -06:00
Gregory Nutt
f01c04f1a7
Add support for other members of the Kinetis MK20DX---VLH7 family; undate a README
2015-06-09 18:01:32 -06:00
Gregory Nutt
d1847d2e0b
Correct write to incorrect register in EFM32 SPI driver. From Pierre-noel Bouteville.
2015-06-09 12:50:30 -06:00
Gregory Nutt
13e8c0d5b1
Update/add README.txt files
2015-06-09 07:03:25 -06:00
Gregory Nutt
f3425d6298
Fix SAMA5 CAN frame construction. From Max Holtzberg.
2015-06-07 13:13:44 -06:00
Gregory Nutt
f875a26ed2
Add SPI GPIO pin initialization. From Pierre-noel Bouteville.
2015-06-05 14:26:21 -06:00
Gregory Nutt
0488df7cf3
Correct some comments. Noted by Jouko Holopainen
2015-06-04 08:12:58 -06:00
Gregory Nutt
e816afe161
LC17 Ethernet: Ignore 4-bit versin number when checking for PHY ID match
2015-06-03 19:47:10 -06:00
Gregory Nutt
03562269d4
Lincoln60: Add a network enabled NXH configuration (still does not yet build)
2015-06-03 18:48:08 -06:00
Gregory Nutt
7677cf72eb
LPC17 Ethernet: Add support for the Micrel KSZ8041 PHY.
2015-06-03 17:34:36 -06:00
Gregory Nutt
d9d6ff1d1b
Fix some memory sizing errors in refreshed defconfig files
2015-06-02 08:44:57 -06:00
Gregory Nutt
e6b8d2eebe
Refresh some Olimex LPC1766STK networking configurations
2015-06-02 08:12:44 -06:00
Gregory Nutt
1d697a18d1
Condition default value for CONFIG_ARMV7M_TARGET2_PREL on UCLIBCXX_EXCEPTION
2015-06-01 15:12:33 -06:00
Gregory Nutt
280e2ee385
Add support uClibc++ excpetions. This involves additional handling for relative relation types, additional support for unwinding, as well as additional changes. The culmination of a big effort fromo Leo Aloe3132
2015-06-01 14:16:18 -06:00
Gregory Nutt
73419e77f4
LPC17 Ethernet: Fix several compilation related issues when CONFIG_NET_NOINTS=y
2015-06-01 08:35:40 -06:00
Gregory Nutt
29b6f140e3
LPC17xx Ethernet: Improve CONFIG_NET_NOINTS implementation
2015-06-01 08:07:32 -06:00
Gregory Nutt
0c59dd2888
Fix a missing # in the previous commit
2015-05-31 13:26:13 -06:00
Gregory Nutt
4e811aa54d
Add basic support for the STM32F205RG. From SourceForge Ticket 40 (anonymous).
2015-05-31 13:06:26 -06:00
Gregory Nutt
a25d0908f8
Simulator: Add more name conversons. From Max Neklyudov
2015-05-29 08:20:06 -06:00
Gregory Nutt
38735fafeb
More missing semicolons after DEBUGASSERT
2015-05-27 13:32:39 -06:00
Gregory Nutt
d41b050526
Fix another missing semicolon after DEBUGASSERT
2015-05-27 11:49:19 -06:00
Gregory Nutt
d50761428c
LPC11: Fix hardcoded BAUD calculation. Is no configurable. From Alan Carvalho de Assis
2015-05-27 09:44:07 -06:00
Gregory Nutt
528275a77c
Fix some typos
2015-05-27 07:34:35 -06:00
Gregory Nutt
ac102d3f85
K20: Some preliminary pin definitions
2015-05-26 17:02:47 -06:00
Gregory Nutt
318345fb1d
Basic support for the Kinetis K20 architecture. Taken from PX4. This is the work of Jakob Odersky.
2015-05-26 15:03:35 -06:00
Gregory Nutt
cae38625f8
SAM4L: Fix some issues from loast commit. Now running off DFLL with source clock = XOSCK32K
2015-05-26 13:25:39 -06:00
Gregory Nutt
b96a141e8a
SAML21-Xlplained: Add options to enable XOSC32K and to use it as the DFLL source; NSH configure now uses DFLL with OSC16M source
2015-05-26 10:39:38 -06:00
Gregory Nutt
f055d4cac4
Logic that samples the free running counter reads the pending interrupt status regsiter and can cause interrupts to be lost. So, if when the status regsiter is read, the logic must also handle the timer overflow event. Found and fixed by Max Neklyudov
2015-05-26 08:09:10 -06:00
Gregory Nutt
fe175fbc16
SAMD20: Fixes the problem introduced with the SAML21 integration
2015-05-25 10:13:06 -06:00
Gregory Nutt
643a98a0a8
SAML21: Fix issue with open loop operation; Add configuration options to select clock source
2015-05-24 10:27:37 -06:00
Gregory Nutt
9649e564f9
LPC11xx: Use offsets instead of absolute address in look-up tables. This saves about 156 bytes of FLASH. From Alan Carvalho de Assis.
2015-05-24 07:49:38 -06:00
Gregory Nutt
6973337ccd
Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis
2015-05-23 17:08:35 -06:00
