Commit Graph

11011 Commits

Author SHA1 Message Date
Gregory Nutt
3012abdc45 configs/stm32f4discovery/hciuart: Disable MMC/SD support. That made it difficult to re-use the configuration without the base board. MMC/SD support is not needed in that configuration anyway. 2018-04-24 06:53:37 -06:00
Gregory Nutt
505f460b6b configs: Review all implementations of board_lcd_initialize(). The NuttX convention is that all internal functions that return errors as an 'int' must return a negated errno value on failure and a non-negative value on success. Most were right but eight of them had cloned logic that returns 1 on success and zero on failure... both of which are interpreted as success by the caller since they are non-negative. 2018-04-21 18:03:01 -06:00
Alan Carvalho de Assis
1a879a3b52 configs/stm32f4discovery: Add MAX7219 support to STM32F4Discovery board 2018-04-21 17:41:01 -06:00
Jake Choy
459b9ec262 configs/imxrt1050-evk: Add logic to support user LED 2018-04-20 15:59:39 -06:00
Alan Carvalho de Assis
677be2f437 configs/nrf52-pca10040: Add a configuration for testing the watchdog timer. 2018-04-20 07:47:19 -06:00
Alan Carvalho de Assis
161fb98b11 configs/nrf52-pca10040: Add support for starting the watchdog timer on the nRF52. 2018-04-20 07:23:57 -06:00
Gregory Nutt
9b83737821 drivers/wireless/bluetooth: Partition bt_uart.c adding bt_uart.h and bt_uart_generic.c. This will now permit adding HCI UART drivers that have custom initialization requirements.. such as parts the need to download a configuration file to the HCI UART before they are usable. 2018-04-19 17:48:04 -06:00
Gregory Nutt
1d044e6952 Eliminate some warnings found in build-testing 2018-04-19 16:54:17 -06:00
Gregory Nutt
82aa7a486c configs/Kconfig: Fix some breakage inflicted on the Kconfig file by the i.MX RT merge. Fix some coding standard problems in hymini-stm32v board support. 2018-04-19 16:36:35 -06:00
Gregory Nutt
44a5a7e170 wireless/bluetooth: Remove Rx kernel thread. The operation of dispatching messages can be performed just as well on the high and low priority work queue. The network driver operates the low priority work queue so that also integrates better with network frame reception. 2018-04-19 08:52:09 -06:00
Ivan Ucherdzhiev
1672f8d0ce configs/tms570ls31x-usb-kit: Adds support for the TI Hercules TMS570LS31x USB Kit 2018-04-18 09:21:38 -06:00
Gregory Nutt
1224db454b arch/arm/src/stm32 and drivers/wireless/bluetooth: Fix some buffer management errors in HCI UART upper and lower halves. 2018-04-18 08:17:15 -06:00
Gregory Nutt
27f624d881 drivers/wireless/bluetooth: Default BAUD must be 115200, Fix logic in Rx callback, Rx callback must execute on work queue. Now sends and receives one command and response. But hangs on the next. 2018-04-17 13:07:28 -06:00
Gregory Nutt
862ff9cae3 arch/arm/src/stm32/: In HCI UART, sense of RTS and CTS are inverted. When we speak of asserting RTS we mean setting nRTS to zero. 2018-04-16 17:14:51 -06:00
Gregory Nutt
603efe6fb5 arch/arm/src/stm32 and configs/stm32f4discovery: Some feeble attempts to communicate with the BT860. Not much progress yet. 2018-04-16 15:24:28 -06:00
Gregory Nutt
d59c97208c arch/arm/src/imxrt: Fix problem with with CPU hanging during boot in the clockconfig function. configs/imxrt1050-evk/scripts: Update linker script so that the NXP boot header will be included in the build. 2018-04-16 09:30:04 -06:00
Gregory Nutt
e470846356 Remove all references to the Yahoo group. 2018-04-15 17:15:48 -06:00
Gregory Nutt
5d2c226675 wireless/bluetooth and drivers/wireless/bluetooth: Simply the driver registration/initialization interface. 2018-04-14 11:33:29 -06:00
Gregory Nutt
fa287e8863 Various fixes/changes from intial testing of the HCI UART on the STM32F4-Discovery board. Re-organized how the Blutetooth network driver is initialized. Added lots of new debug output. Add a new STM32 F4 Discovery configuration for testing the HCI UART. Various fixes to get through initialization (still does not). 2018-04-14 09:23:08 -06:00
Gregory Nutt
0686989645 configs/stm32fdiscovery: Add support in bringup logic to initialize the HCI UART and register the HCI UART network device. 2018-04-13 14:53:11 -06:00
Ivan Ucherdzhiev
0d7917a4a1 configs/imxrt1050-evk: This commit adds support for booting from the on board HYPER Flash. I placed the boot and flash files in the /configs/imxrt1050-evk/ , because I thing they are board related, so for other board or other flash this files has to be changed. So far I verified that the __start function is called and the code is executing from flash, but still the rest of the code is not tested. 2018-04-13 12:49:54 -06:00
Gregory Nutt
d25549ac54 This commit adds a Bluetooth HCI UART lower half driver for the STM32
Squashed commit of the following:

    arch/arm/src/stm32:  Add Kconfig options needed by the HCI UART.  Various fixes to finally get a clean error free compile with no unexpected warnings.
    arch/arm/src/stm32:  In HCI UART, use spin_lock_irqsave() instead of enter_critical_section() whenever possible.
    arch/arm/src/stm32:  In HCI UART, fix up naming of configurations so that they are unique.  Still needs Kconfig settings.  Modify logic so that there can be multiple HCI UARTs, some supporting DMA and some not.
    arch/arm/src/stm32:  Integrate watermarks and software Rx flow control into the HCI UART driver.
    arch/arm/src/stm32:  Eliminate some HCI UART UART configuration options.  Per the HCI UART spec, the link will b 8 data bits, no parity, 1 stop bit... Always.
    arch/arm/src/stm32:  Trivial cleanup
    arch/arm/src/stm32:  Fixes most initial compilation issues STM32 HCI UART driver.  Still need to set up USART configuration parmeters for HCI UART
    arch/arm/src/stm32:  Completes first cut at STM32 HCI UART driver.
    arch/arm/src/stm32:  Completes most of read logic for HCI UART.  Still needs to be able to block if no read data is available.  Still missing write and flush logic.
    drivers/wireless:    Remove txenable from HCI UART methods.  arch/arm/src/stm32:  Reorganize some structures in HCI UART.
    arch/arm/src/stm32:  Still messaging the HCI uart driver.
    arch/arm/src/stm32:  Some trivial renaming.
    arch/arm/src/stm32:  A little more HCI-UART logic.
    arch/arm/src/stm32:  Initial setup to support HCI-UART.  Little more than the serial driver with some name changes and a few things removed.
2018-04-13 10:36:23 -06:00
Ivan Ucherdzhiev
cf8c25df64 This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested.
This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself.  I give credit to Ivan for the kill because he is the one to held on to the end.

Squashed commit of the following:

  Author: Gregory Nutt <gnutt@nuttx.org>
    configs/imxrt1050-evk/scripts:  Add section to linker script to handle the case where RAMFUNCs are enabled.  RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled.

  Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com>
    arch/arm/src/imxrt:  imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing.
    arch/arm/src/imxrt:  Add logic to imxrt_lowputc.c.  Still incomplete.

  Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com>
    arch/arm/src/imxrt:  Add serial support.  configs/imxrt1050-evk:  Add linker script.

  Author: Gregory Nutt <gnutt@nuttx.org>
    arch/arm/src/imxrt:  Add initial cut at imxrt_allocateheap.c

  Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com>
    arm/arm/src/imxrt:  Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c.
    arch/arm/src/imxrt/chip:  Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers.  Only the IMXRT_INPUT definitions in this commit.
    arch/arm/src/imxrt/chip:  Add more IOMUXC register definitions.

  Author: Gregory Nutt <gnutt@nuttx.org>
    configs/imxrt1050-evk:  Add STRIP definition to Make.defs.
    arch/arm/src/imxrt:  Bring in i.MX6 memory configuration settings.
    arch/arm/src/imxrt:  Remove call to non-existent imxrt_gpioinit() from imxrt_start.c.
    arch/arm/src/imxrt:  Bring in incomplete imxrt_iomuxc.c file from i.mx6.
    arch/arm/src/imxrt:  Add first cut at GPIO interrupt logic.
    arch/arm/include:  Add definitions to support a second level of GPIO pin interrupts.

  Author: Janne Rosberg <janne.rosberg@offcode.fi>
    arch/arm/src/imxrt:  Add imxrt_wdog.c/.h

  Author: Gregory Nutt <gnutt@nuttx.org>
    arch/arm/src/imxrt:  Port SAMv7 interrupt logic to imxrt_irq.c.
    arch/arm/src/imxrt:  More clarification of the start-up memory map.
    arch/arm/src/imxrt:  Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7.
    arch/arm/src/imxrt:  Add imxrt_start.c.  Initial commit is the the SAMv7 startup logic with name changes.

  Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com>
    arch/arm/src/imxrt:  Adds a few IOMUXC register definitions.

  Author: Janne Rosberg <janne.rosberg@offcode.fi>
    arch/arm/src/imxrt:  Add imxrt_clockconfig.c/.h
    configs/imxrt1050-evk:  Add clock configuration definitions to board.h
    arch/arm/src/imxrt:  Fix CCM register name; Fix doubly defined in LPUART bit field.
    arch/arm/src/imxrt:  Add analog defines to CCM register definition header file.

  Author: Gregory Nutt <gnutt@nuttx.org>
    arch/arm/src/imxrt:  Bring in GPIO C files from i.MX6.  Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place.
    arch/arm/src/imxrt:  Add a few more GPIO definitions to make the header file compatible with i.MX6
    arch/arm/src/imxrt/chip:  Add GPIO register definition file.

  Author: Janne Rosberg <janne.rosberg@offcode.fi>
    arch/arm/src/imxrt:  Add DCDC register definitions.
    arch/arm/srch/imxrt: Add CCM register bit definitions

  Author: Gregory Nutt <gnutt@nuttx.org>
    Purely cosmetic
    arch/arm/src/imxrt:  Add system reset controller register definition header file.
    Embarassingly trivial change left in compiler.
    arch/arm/src/imxrt:  Finishes i.MX RT1050 LPUART register definition header file.
    arch/arm/src/imxrt:  Beginning of an i.MX RT1050 LPUART register definition header file.
    Some trivial things

  Author: Janne Rosberg <janne.rosberg@offcode.fi>
    arch/arm/src/imxrt:  Add imxrt_wdog.h
    arch/arm/src/imxrt:  Add initial imxrt_ccm.h

  Author: Gregory Nutt <gnutt@nuttx.org>
    Trivial update to README.
    arch/arm/src/imxrt:  The i.MX Rt implements 4 bits of interrupt priority, not two.  Thanks, Janne.
    arch/arm/src/imxrt:  Fix some initial compile issues.  Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk.
    configs/imxrt1050-evk:  Add an initial NSH configuration for testing.
    configs/Kconfig:  Hook the i.MX RT 1050 board configuration into the NuttX configuration system.
    configs/imxrt_evk:  Add the framework for i.MX RT 1050 board support.
    arch/arm/src/imxrt:  Bring in a few more files from LPC54xxx.
    arch/arm/src/imxrt:  Bring in imxrt_clrpend() from the LPC54xxx.
    arch/arm/src/imxrt:  Bring in Cortex-M7 SysTick setup from the SAMv7.
    arch/arm/src/imxrt:  Add a few easy files.
    arch/arm/src/imxrt/chip:  Add memory map header files.
    arch/arm/src/imxrt:  A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
Gregory Nutt
b42d31401c include/nuttx/wireless.h: Fix some coding standard violations. configs/indium-f7: Fix some compile errors found in build testing. 2018-04-12 08:11:55 -06:00
Bob Feretich
e87b39e672 configs/indium-f7: Cleanup. Remove nucleo references. Remove xxx-evalos configurations. 2018-04-10 07:12:56 -06:00
Gregory Nutt
730f7450b7 Remove all support for the CC3200 and CC3200-Launchpad. This was a port that was started but never completed. What good is partial CC3200-Launchpad board support with no wireless support?
Squashed commit of the following:

    Remove final references to CC3200 from the repository.
    arch/arm/include/tiva:  Remove all CC3200 support.
    arch/arm/src/tiva:  Remove all CC3200 support.
    configs/cc3200-launchpad:  Remove the board support directory.
2018-04-09 16:41:27 -06:00
Tiago Almeida
a482867c00 drivers/sensors/max31855: Add multiple max31855 sensors feature and support for bambino-200e and stm32f4discovery 2018-04-09 15:36:27 -06:00
DisruptiveNL
0e142aeee1 DisruptiveNL <disruptivesolutionsnl@gmail.com> 2018-04-08 07:30:19 -06:00
Mateusz Szafoni
4de1378ceb Merged in raiden00/nuttx (pull request #625)
fix warnings found in stm32f334-disco/buckboost configuration

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-04-07 13:06:39 +00:00
Gregory Nutt
33d5325b09 STM32 F3: Fix a couple of new warnings noted in build testing. There are more new warnings, but I think these may be due to improper default values for some configuration settings. I have not looked into this in detail. 2018-04-04 17:32:25 -06:00
Gregory Nutt
5000e31c4f configs/stm32f344-disco: Clean up some debug output strings. 2018-04-04 15:39:45 -06:00
Gregory Nutt
4cf3a06ef6 configs/stm32f344-disco: Fix an error that was causing build tests to fail. 2018-04-04 15:35:57 -06:00
Gregory Nutt
318c7e11c3 stm3fl476-disco: Fix some incomplete removal of CC3000 logic. 2018-04-04 13:56:52 -06:00
Mateusz Szafoni
be5c20cdae Merged in raiden00/nuttx (pull request #616)
stm32/Kconfig: add some comments to HRTIM configuration, add ADC injected channels configuration; stm32f33xxx_hrtim.h: add some comments; stm32f334-disco: add buck/boost converter example configuration

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-04-04 17:03:48 +00:00
Alan Carvalho de Assis
b4c1ac0659 This commit removes all support and all references to the Spark board and to the CC3000 wireless part.
Squashed commit of the following:

Author: Gregory Nutt <gnutt@nuttx.org>
    Fix a few remaining refereces to cc3000.

Author: Alan Carvalho de Assis <acassis@gmail.com>
    drivers/wireless/cc3000: emove the driver to support CC3000 because it doesn't use the USRSOCKET

Author: Alan Carvalho de Assis <acassis@gmail.com>
    configs:  Remove board support to CC3000 from all relevant configurations.

Author: Gregory Nutt <gnutt@nuttx.org>
    configs/spark:  Removes Spark board configuration.  Still available in the Obsoleted repository.  This is preparation for removal of CC3000 support by Alan Carvalho de Assis.  If there is no CC3000 support, then there is no purpose in supporting the Spark either.
2018-04-04 09:34:23 -06:00
Masayuki Ishikawa
97ca4ef956 Merged in masayuki2009/nuttx.nuttx/change_copyright (pull request #621)
Change all Sony related copyright to conform with our company's internal rules.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-04-04 12:35:47 +00:00
Gregory Nutt
265b5d7dc6 wireless/bluetooth: A few trivial fixes from initial testing with the simulator. The simulated Bluetooth device is probably going to be in adequate for any level of testing. 2018-04-03 16:28:22 -06:00
Gregory Nutt
6962f6886c configs/sim: Add a configuration that will support some limited testing of the Bluetooth stack. 2018-04-03 10:07:15 -06:00
Gregory Nutt
0142a5ad13 arch/sim/src: Variable fixes to get a Bluetooth simulation build. 2018-04-03 10:00:56 -06:00
Gregory Nutt
15d033e32b drivers/wireless/bluetooth: Add a NULL device to support some very low level testing on the Simulator. 2018-04-03 09:00:18 -06:00
Janne Rosberg
296a7d33b0 configs/nrf52-pca10040: Add support for buttons 2018-03-27 07:41:46 -06:00
Janne Rosberg
d608f6943b arch/arm/src/nrf52: Initial support for the NRF52 2018-03-26 10:37:32 -06:00
Gregory Nutt
dc8941e958 configs/: Add definition of strip to many Make.defs files. 2018-03-25 09:25:37 -06:00
Gregory Nutt
8b4b61f140 fs/cromfs: Fix a error in reading partial compressed blocks. The LZF decompressor does not support that operation. Instead we have to decompress full block into a temporary buffer and copy out the parts that we need. To compensate for the performance hit, a caching mechanism was added so that we do not have to read the same block repeatedly. Unrelated: Also updates some README files. 2018-03-24 11:30:35 -06:00
Gregory Nutt
d107ef6d54 configs/cc3200-launchpad: I don't think that there is any reason for BINFS to be enabled in the NSH configuration. 2018-03-23 11:05:53 -06:00
Gregory Nutt
3810f9e942 Remove configurations using canutils/libuavcan and examples/uavcan. libuavcan has not built for a year or so. The basic problem is that as NuttX advances, the old frozen versino of libuavcan has become absolute because it violates the portable POSIX OS interface. No one is maintaining the port so there is no alternative but to remove it. 2018-03-23 07:37:49 -06:00
Juha Niskanen
4a0e98de3a configs/nucleo-144: Some documentation updating 2018-03-22 06:42:19 -06:00
lihaichen
6538e4750f drivers/wireless: Fix some issues in the CC1101 driver; Update the CC1101 chip version number 2018-03-19 09:25:41 -06:00
Gregory Nutt
c8b567db61 configs/stm32f103-minimum: Fix a few typos. 2018-03-17 12:49:10 -06:00
Gregory Nutt
3a95464153 configs/stm32f4discovery: Building of stm32_appinit.c should not depend on CONFIG_NSH_LIBRARY but on CONFIG_LIB_BOARDCTL. 2018-03-16 12:16:19 -06:00
Gregory Nutt
b3aa10c9ff configs/stm32f4discover/posix_spawn: With recent changes, needs to enabled boardctl() w/symbol table support. 2018-03-16 11:57:08 -06:00
Gregory Nutt
cdca265965 Refresh some configurations and adapt to recent changes to apps/examples/nsh. 2018-03-16 08:52:46 -06:00
Gregory Nutt
573887d4ee Trivial correction to a typo in a comment. 2018-03-15 07:36:57 -06:00
Gregory Nutt
4a21c64f68 Update a README 2018-03-14 09:31:07 -06:00
Gregory Nutt
b54ffe858a Standardization of some function headers. 2018-03-13 09:52:27 -06:00
Simon Piriou
d340ff8f62 Merged in spiriou/nuttx/stm32f103minimum_dfu (pull request #612)
stm32f103-minimum: add support for DFU bootloader

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-03-12 21:55:06 +00:00
Gregory Nutt
f346bb0e88 drivers/lcd/ft80x: Fix a typo that caused the driver to fail to recognize the ft801 chip version. Also update an unrelated README file. 2018-03-11 09:45:47 -06:00
Gregory Nutt
73c107e1fb Squashed commit of the following:
drviers/lcd/ft80x:  No longer depends on CONFIG_EXPERIMENTAL
    Update README.txt
2018-03-10 10:15:32 -06:00
Gregory Nutt
399b9860af Squashed commit of the following:
drivers/lcd/ft80x:  ACTIVE host command appears to be formatted differently than other host commands; Fix ROM CHIPID.  Appears to be big-ending, BCD.
    drivers/lcd/ft80x:  Fix some compile issues when debug features are enabled.
2018-03-09 12:32:59 -06:00
Gregory Nutt
82baae5101 Makefile.unix: This seems to eliminate the spuriouis errors reported by 'make savedefconfig' 2018-03-07 13:37:53 -06:00
Gregory Nutt
0b277da5fa arch/arm/src.stm32/Kconfig: Reduce redundancy in STM32F401 config settings. 2018-03-05 18:40:45 -06:00
Gregory Nutt
987a8298f2 Fix some errors found in build testing + clean-up some issues with last changes to remove use of printf() from within the OS. 2018-03-03 15:51:27 -06:00
Gregory Nutt
b4f2b0dfc6 Remove all usage of printf() from the OS. That is not an acceptable context for the use of an application-oriented interface that depends on a task-specific file descriptor and C buffered I/O. 2018-03-03 15:20:21 -06:00
Author: lihaichen
afe5f706f6 Squashed commit of the following:
cc1101:  Changes from review of last PR.
    remove gpio
    remove  cc1101 frame len
    remove FLAGS_RXONLY flags
    add cc1101 function
    remove some waring
    add cc1101 poll function
    add cc1101 register
    add cc1101 isr read data
    add cc1101 spi deviceId
    add cc1101 init2
    add wait cc1101 chip ready
    raw init cc1101
2018-03-03 08:53:51 -06:00
Gregory Nutt
2da2a79104 Update README 2018-03-01 08:36:48 -06:00
Gregory Nutt
8fe9e81183 drivers/lcd: Add FT80x controls for the case where the audio amplifier is controlled by FT80x GPIOs vs MCU gpios. 2018-02-27 08:45:34 -06:00
Gregory Nutt
eeb40dc600 drivers/lcd: Extend FT80x touchscreen initialization; add more touchscreen-related definitions. 2018-02-25 11:18:35 -06:00
Gregory Nutt
b2d415da79 configs/viewtool-stm32f107: Add support for FT80X initialization. Add ft80x configuration that will eventually be used for testing the ft80x if I ever receive hardware. 2018-02-24 13:11:27 -06:00
Masayuki Ishikawa
82e94a9948 Merged in masayuki2009/nuttx.nuttx/lc823450_dvfs_auto (pull request #604)
lc823450 dvfs auto

* arch/arm/src/lc823450: Fix up_enable_irq() timing for I2S.

    In previous commit, I2S IRQ might be sometimes assigned to CPU1
    when CONFIG_SMP=y. This change fixes this issue.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Refactor timer driver.

    Introduce lc823450_timer.h and move lc823450_timerisr.c to
    lc823450_timer.c Add MTM timer APIs for DVFS.  Introduce
    up_rtc_gettime() for CONFIG_RTC_HIRES.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Introduce idle time calculation in DVFS

    Also, DVFS autonomous mode based on CPU idle time is supported.
    NOTE: voltage control is still disabled.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Update defconfigs

    Enable RTC_HIRES instead of RTC_DATETIME (audio/rndis)
    Disable TCP_WRITE_BUFFERS and change SCHED_LPWORKPRIORITY (rndis)

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Update README.txt

    Update SMP and DVFS related part

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-02-23 13:26:40 +00:00
Dmitriy Linikov
a8c58607e9 Merged in hardlulz/modem-3.0-nuttx/fix-sem-EINTR (pull request #603)
Added ECANCELED condition to DEBUGASSERT-s checking sem_wait result

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-02-20 18:24:53 +00:00
Louis Mayencourt
bd81664b31 configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port) 2018-02-19 14:38:22 -06:00
Alan Carvalho de Assis
b13367be1e configs/stm32f103-minimum: Remove CONFIG_NX_LCDDRIVER dependence from stm32_ssd1306.c 2018-02-14 13:12:27 -06:00
Gregory Nutt
1ee0f0518b stm32f103-minimum/src/: Fix newly introduced errors and warnings. Most cause by removing illegal inclusions from board.h. 2018-02-14 11:49:56 -06:00
Alan Carvalho de Assis
a583b168a7 configs/stm32f103-minimum: Add board support to MAX6675 Thermocouple sensor 2018-02-14 07:58:26 -06:00
Gregory Nutt
2284d045ff configs/flipnclick-pic32mz and -sam3x: Generalize naming. HiletGo is one SSD1306 LCD, but the logic should work with any SSD1306. Naming need to be generalized to SSD1306 to make this reusability clear. 2018-02-13 19:16:57 -06:00
Alan Carvalho de Assis
d3ddf2e05f configs/stm32f103-minimum: Add OLED SSD1306 support to STM332F103-Minimum 2018-02-11 16:48:38 -06:00
Gregory Nutt
4e32861c3c Changes from review of last PR + some updated comments. 2018-02-11 16:42:37 -06:00
Gregory Nutt
d5522704b1 configs/flipnclick-sam3x: Adds basic board support for the HiletGo OLED. 2018-02-11 10:57:35 -06:00
Alan Carvalho de Assis
3648563ed8 configs/stm32f103-minimum: Add zerocross support to STM32F103-Minimum board 2018-02-11 10:30:45 -06:00
Gregory Nutt
a524b33f2c Update some comments 2018-02-11 10:30:45 -06:00
Gregory Nutt
8f8ee5009d Update some C comments. 2018-02-10 17:05:25 -06:00
Gregory Nutt
dd56cc87be configs/flipnclick-pic32mz: Fix some SPI bus confusion; update README. 2018-02-10 11:45:12 -06:00
Gregory Nutt
642d7e3ce2 Squashed commit of the following:
configs/flipnclick-pic32mz:  Add an nxlines configuration for use in testing the custom HiletGo Click board.
    arch/mips/src/pic32mz:  Correct some SPI-related typos.  configs/flipnclick-pic32mz: Finishes integration of HiletGo OLED. drivers/lcd:  Finish support for HiletGo OLED.
    drivers/lcd:  Add configuration support for HiletGo OLED.  configs/flipnclick-pic32mz:  Add board support for HiletGo OLED.
2018-02-10 09:43:12 -06:00
Gregory Nutt
b793c7040a Update README 2018-02-09 12:59:33 -06:00
Gregory Nutt
ee46bf4d29 Update README 2018-02-09 11:15:00 -06:00
Gregory Nutt
73ec87109f arch/mips/src/mips32: In up_idle, the kludge that was conditionally enabled if the work queue was enable appears to be needed even when he work queue is not enabled on the PIC32MZ.
arch/mips/src/pic32mz: Fix some typos in debug instrumentation in pic32mz-gpio.c; fix some types releated to UART5 configuration in pic32mz-serial.c.

configs/flipnclick-pic32mz/nsh:  Switch serial console to UART3.  There is some problem with the UART4 RX pin documentation or configuration.
2018-02-09 11:11:44 -06:00
Gregory Nutt
29ae7caedc Update README 2018-02-08 16:39:02 -06:00
Gregory Nutt
970bcef197 configs/flipnclick-pic32mz: Add support for PROCFS file system. 2018-02-08 10:06:43 -06:00
Gregory Nutt
42720a5473 Update README 2018-02-07 14:55:56 -06:00
Gregory Nutt
6c58eac6ab configs/sabre-6quad: Update README. 2018-02-07 08:57:01 -06:00
Gregory Nutt
50ab5d638a sched/task: It is not appropriate for logic in task_exit() to call the new version of this_task(). sched/irq: Remove redundant fetch of CPU index; configs/sabre-6qguad: update README. 2018-02-06 19:06:33 -06:00
Gregory Nutt
cce21bef32 sched/sched: sched_lock() and sched_unlock().. back out some changes I made recently. The seemed correct but apparently not. Also reorder to logic so that g_global_lockcount is incremented for the very minimum amount of time. 2018-02-06 13:49:21 -06:00
Gregory Nutt
de34b4523f sched/ and arch/arm/src/armv7-a: Replace a few more occurrences of this_task() with current_task(cpu) in an effort to get the i.MX6 working in SMP mode again. It does not yet work, sadly. 2018-02-06 11:17:33 -06:00
Gregory Nutt
8aa1538506 arch/arm/src/armv7-a: Found some additional places were the new this_task() function cannot be called in the i.MX6 SMP configuration. 2018-02-06 10:33:28 -06:00
Gregory Nutt
0ba7853016 sched/irq: Fix a infinite recursion problem that a recent change introduced into the i.MX6 SMP implementation. 2018-02-06 09:18:03 -06:00
Michael Jung
cbd8fa31d1 configs/stm32f429i-disco: Separate SPI4 from MTD init. I was trying to attach a non-MTD peripheral to an STM32F429I Discovery Board's SPI4 port and was hitting compilation problems, since CONFIG_MTD and thus 'struct mtd_geometry_s' was not defined. This patch separates SPI4 initialization logic from MTD initialization logic. 2018-02-05 06:35:40 -06:00
Alan Carvalho de Assis
97937d3d47 configs/stm32f103-minimum: Add support to BMP180 on BluePill (stm32f103-minimum) board. 2018-02-04 07:34:31 -06:00
Gregory Nutt
2683f713ab Make sure that labeling is used consistently in all function headers (part 3). 2018-02-01 12:17:03 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
50ca32e254 Squashed commit of the following:
sched/:  Convert legitimate uses of task_create() to nxtask_create().  Review handling of returned values from all uses of kthread_create() (as well as nxtask_create()).
    graphics/:  Review return values for all calls to kthread_start() because it no longer returns an errno.
    drivers/:  threads started by drivers should be kernel threads, not user tasks.  Review return values for all calls to kthread_start() because it no longer returns an errno.
    configs/:  threads started by board bringup logic should be kernel threads, not user tasksi (part 2 of 2).
    sched/task:  Add nxtask_create().  Kthread_create() and nxtask_create() are internal OS functions and should not modify the errno variable.  configs/:  threads started by board bringup logic should be kernel threads, not user tasks.
2018-01-31 16:11:54 -06:00
Gregory Nutt
3521aaf944 Squashed commit of the following:
binfmt/, configs/, grahics/, libc/, mm/, net/, sched/:  OS references to the errno variable should always use the set_errno(), get_errno() macros
    arch/arm/src/stm32 and stm32f7:  Architecture-specific code is not permitted to modify the errno variable.  drivers/ and libc/:  OS references to the errno variable should always use the set_errno(), get_errno() macros
2018-01-30 17:57:36 -06:00
Gregory Nutt
170a50c690 Squashed commit of the following:
sched/sched:  Correct some build issues introduced by last set of changes.
    sched/sched:  Add new internal OS function nxsched_setaffinity() that is identical to sched_isetaffinity() except that it does not modify the errno value.  All usage of sched_setaffinity() within the OS is replaced with nxsched_setaffinity().
    sched/sched:  Internal functions sched_reprioritize() and sched_setpriority() no longer movidify the errno value.  Also renamed to nxsched_reprioritize() and sched_setpriority().
    sched/sched:  Add new internal OS function nxsched_getscheduler() that is identical to sched_getscheduler() except that it does not modify the errno value.  All usage of sched_getscheduler() within the OS is replaced with nxsched_getscheduler().
    sched/sched:  Add new internal OS function nxsched_setparam() that is identical to sched_setparam() except that it does not modify the errno value.  All usage of sched_setparam() within the OS is replaced with nxsched_setparam().
    sched/sched:  Add new internal OS function nxsched_getparam() that is identical to sched_getparam() except that it does not modify the errno value (actually, the previous value erroneously neglected to set the errno value to begin with, but this fixes both issues).  All usage of sched_getparam() within the OS is replaced with nxsched_getparam().
2018-01-30 11:08:18 -06:00
Mateusz Szafoni
0afbcb0bab Merged in raiden00/nuttx (pull request #585)
Master

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-28 13:46:17 +00:00
Gregory Nutt
6c277d082f configs/flipnclick-pic32mz: Apply same LED fix as for flipnclick-sam3x. The LED code is cloned. 2018-01-28 07:42:02 -06:00
raiden00pl
cec8709ec1 stm32/Kconfig: fix COMP7 dependency
stm32_hrtim: add HRTIM push-pull mode configuration

stm32f334-disco: add buck-boost converter mode
2018-01-28 11:06:08 +01:00
Gregory Nutt
c0a79a8e45 configs/flipnclick-sam3x: Fix an error in the control of one LED. LEDs should not be pulled up since they are active high. 2018-01-27 12:42:51 -06:00
Gregory Nutt
12e3e47d3c Update comments, mostly spelling errors. 2018-01-27 09:37:46 -06:00
Gregory Nutt
23c6debc63 configs/flipnclick-sam3x: Update README and comments to discuss I2C access on all mikroBUS connectors. 2018-01-25 13:33:09 -06:00
Gregory Nutt
483dfe80d9 configs/flipnclick-pic32mz and flipnclick-sam3x: Update README and add pin definitions to support SPI on all mikroBUS connectors. 2018-01-25 12:45:02 -06:00
Gregory Nutt
633e90225e configs/flipnclick-sam3x (also Arduio-Due): Remove disabling of environmont, mountpoints, and poll. Add NSH arch initialization so that procfs will be automounted. Increase task name size from 0 to 32. Update README. 2018-01-25 10:37:16 -06:00
Gregory Nutt
cafb527262 configs/flipnclick-sam3x: Using JTAG (vs. Bossac) I was finally able to load code and verify the basic NSH configuration. Updated READMEs. Also switched to USART0 (vs UART0) for the serial console because I was not getting bi-directional communication on the VCOM. 2018-01-24 08:52:40 -06:00
Gregory Nutt
82cb799bb6 net/udp: Fix memory leak with UDP + write buffer is closed. Also update TODO and comments and refresh a configuration. 2018-01-23 11:54:03 -06:00
David Alessio
6ae6ecc958 Merged in david_alessio/nuttx/refactor-pll-setup (pull request #581)
Refactor pll setup

* fix typo in #def

* refactor PLL setup code...

* refactored PLL/CLK config, easier, checks for correctness

* call go_os_start if STACK_COLORIZED

* smarter config of EXTCLK output freq

* cosmetic

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-22 13:20:35 +00:00
Fanda
460d362eb7 Merged in fvacek/nuttx (pull request #580)
NUCLEO F432KC typo fixed, correct name is L432KC

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-21 18:28:47 +00:00
Mateusz Szafoni
5af7e3de2a Merged in raiden00/nuttx (pull request #579)
Master

* stm32_hritm: add interface to get timer clock frequency

    stm32_hrtim: fix timer freq calculation

    stm32_hrtim: add compar/capture registers significant bits checking

    stm32_hrtim: minor changes

* stm32f334-disco: add buck converter and boost converter logic

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-21 18:28:09 +00:00
Fanda Vacek
9916ca89e6 NUCLEO F432KC typo fixed, correct name is L432KC
Just README.txt and comments affected, no changes in the code
2018-01-21 19:06:22 +01:00
Gregory Nutt
f153df28d3 configs/nucleo-l432kc: Fix numerous cloning errors/typos. 2018-01-20 16:16:35 -06:00
Fanda Vacek
d0ae325c15 Issue #85: /dev/userleds is not working for nucleo-l432kc fixed 2018-01-20 23:02:34 +01:00
Gregory Nutt
e8e8914cab Documentation: Fix copy/paste error in NX graphics document. Noted by Henjiu Kang. 2018-01-20 07:11:33 -06:00
Gregory Nutt
ff8cdcc89f configs/lpcxpresso-lpc54628: Update README 2018-01-18 11:14:54 -06:00
Gregory Nutt
c0a343a6f0 configs/lpcxpresso-lpc54628/lvgl: Add LittlevGL graphics demo configuration. 2018-01-18 10:00:27 -06:00
Gregory Nutt
ce7df1f961 configst/stm3240g-eval: Remove only bogus logic to start the NX server. That was there only to support the knxwm configuration and was implemented priorit to boardctl(BOARCIOC_NX_START). 2018-01-18 06:57:38 -06:00
Masayuki Ishikawa
0184f8818a Merged in masayuki2009/nuttx.nuttx/lc823450_fixes (pull request #576)
lc823450 fixes

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-18 12:32:41 +00:00
Masayuki Ishikawa
0fa630d29d configs/lc823450-xgevk: Update README.txt and defconfigs
Update comments on SMP in README.txt
Enable SYSTEM_TIME64 in defconfigs.
Enable INSTRUMENTATION in rndis configuration.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2018-01-18 14:02:39 +09:00
Gregory Nutt
d481ac347d configs: Both CONFIG_LIB_BOARDCTL=y and CONFIG_BOARD_INITIALIZE=y is not meaningful in the standalone NxWM. CONFIG_LIB_BOARDCTL=y is the better option so CONFIG_BOARD_INITIALIZE=y removed from these configurations. 2018-01-17 13:51:29 -06:00
Gregory Nutt
6deebac4ae configs: There should be either CONFIG_LIB_BOARDCTL=y or CONFIG_BOARD_INITIALIZE=y in the defconfig of every standalone NxWM configuration to assure that all of the board resources are initialized... especially the touchscreen since it it now a part of the board driver initialization. 2018-01-17 12:12:07 -06:00
Gregory Nutt
c456b87dcd configs: CONFIG_MAX_TASKS muast be a power of 2 2018-01-17 10:54:39 -06:00
Gregory Nutt
43390c78ea configs: Since the touch screen initialization is now called from one-time board-initialization logic, it no longer needs protection from re-entry. 2018-01-17 10:14:03 -06:00
Gregory Nutt
301bf1ee77 This commit eliminates the BOARDIOC_TSCTEST_SETUP command.
Squashed commit of the following:

    configs:  Each board now initializes the touchscreen controller as a normal part of its board bring-up.  board_tsc_setup() is gone; the touchscreen controller is now treated like any other on-board device.
    Remove all support for BOARDIOC_TSCTEST_SETUP
    Move prototype for board_tsc_setup() from include/nuttx/board.h to individual board header files.
2018-01-17 09:33:28 -06:00
Gregory Nutt
e276d4d16d Remove the BOARDIOC_TSCTEST_TEARNDOWN boardctl() command. Remove all implementations of board_tsc_teardown() (the were all stubs anyway except for the simulation). 2018-01-16 18:03:21 -06:00
Fanda
53db5c80f3 Merged in fvacek/nuttx (pull request #572)
Fixed nucleo-l432kc broken build when CONFIG_USERLED_LOWER defined

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-16 23:33:58 +00:00
Gregory Nutt
c67de1f114 configs/lpcxpresso-lpc54628: Add pin definitions for USART, I2C, and SPI on the Arduino Uno connector. 2018-01-16 11:48:36 -06:00
Juha Niskanen
802f146781 configs/nucleo-* and configs/stm32l476vg-disco: Fix more stm32_userleds.c bogus logic 2018-01-16 07:20:41 -06:00
Gregory Nutt
a30ccce7ce configs/nucleo-l432kc/src: Fix some bogus logic noted by Fanda. 2018-01-15 18:22:29 -06:00
Gregory Nutt
8f94ce46f9 arch/arm/src/lpc54xx: The basic SPI driver is code complete but still untested. This driver is 'basic' in that in only supports polled mode operations. 2018-01-14 12:09:26 -06:00
Gregory Nutt
fdf4e40b6a configs/lpcxpresso-lpc54628: Correct SRAM base address in all configurations. 2018-01-13 08:34:58 -06:00
Gregory Nutt
0eca2c6fef Update README files 2018-01-11 07:28:12 -06:00
Masayuki Ishikawa
48b7f9b807 configs/lc823450-xgevk: Update defconfigs
Apply the latest Kconfig to all configurations.
Enable DVFS in audio and rndis. Add telnet character mode to rndis.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2018-01-10 16:16:03 +09:00
Masayuki Ishikawa
5029aa7e8c configs/lc823450-xgevk: Enable DVFS in lc823450_bringup.c
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2018-01-10 16:16:00 +09:00
Masayuki Ishikawa
ea19abd291 configs/lc823450-xgevk: Update README.txt
Add notes on DVFS (Dynamic Voltage and Frequencey Scaling)

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2018-01-10 16:15:27 +09:00
Gregory Nutt
eef1276565 configs/stm32f103-minimum: Remove nonsensical #error. 2018-01-09 11:17:01 -06:00
Gregory Nutt
c367a223c5 Update README 2018-01-09 07:20:39 -06:00
Gregory Nutt
7d4451ee86 Squashed commit of the following:
configs/flipnclick-pic32mz:  Switch the serial console to UART4.  Clean up some minor issues the LED options.
    configs/flipnclick-pic32mz:  Add support for two on-board buttons:  T1 and T2.
    configs/flipnclick-pic32mz:  Adds basic board support for the Mikroe Flip&Click PIC32MZ board.  Initial commit is just the configs/pic32mz-starterkit with some name chanages.
2018-01-08 14:21:49 -06:00
Gregory Nutt
6fe1f5a96c Squashed commit of the following:
arch/mips/src/pic32mz:  Commits the basic architecture port for the PIC32MZEF.
    arch/mips/src/pic32mz:  Begin adding PIC32MZEF files. Initial commit are simply PIC32MZEC files with name changes.
    arch/mips/include/pic32mz:  Add support for the PIC32MZEF family.
2018-01-08 10:01:23 -06:00
Gregory Nutt
a0aec8ccde configs/stm32f103-minimum: Add file that was included in the last patch. 2018-01-07 12:17:15 -06:00
Gregory Nutt
4227d11b6c configs/flipnclick-sam3x: Update README and some comments. 2018-01-07 11:07:39 -06:00
Gregory Nutt
bc320c7878 configs/arduino-due and flipnclick-sam3x: Enable PROCFS in nsh configurations. 2018-01-06 17:54:48 -06:00
Alan Carvalho de Assis
20c11e918f configs/stm32f103-minimum: Add AT24 EEPROM support on STM32F103-Minimum board 2018-01-06 17:10:32 -06:00
Gregory Nutt
ed18e427f3 Squashed commit of the following:
configs/flipnclick-sam3x:  Add support for the 4 user-controllable LEDs on the board.
    configs/flipnclick-sam3x:  Add board support for the Mikroe Flip&Click SAM3X.
    configs/arduino-due:  Update this old configuration so that it is structured a little more like recent board support.
2018-01-06 17:06:50 -06:00
Gregory Nutt
0253c974b2 Squashed commit of the following:
fs/nxffs:  Giving up on truncate() support in NXFFS for now.  There is too much that has to be done to make that work.
    configs/sim:  Add support for testing NXFFS.
2018-01-06 13:32:32 -06:00
Gregory Nutt
17cedb6b20 Squashed commit of the following:
fs/smartfs:  Add logic needed to ftruncate to shrink a file to any arbitrary size.
    fs/smartfs:  Repartition some functionality to better fit in new ftruncate features.
2018-01-06 10:43:18 -06:00
Gregory Nutt
c85bc9e941 configs/sim: Add support for a RAM MTD driver and initialization for use with SmartFS. 2018-01-05 13:54:37 -06:00
Gregory Nutt
5d1a91fd8e configs/lpcxpresso-lpc5428/fb: Should disable pixel depths that are not being used. 2018-01-04 16:40:31 -06:00
Gregory Nutt
36cc4fc066 Fix saome warnings found in build testing. 2018-01-04 13:33:42 -06:00
Gregory Nutt
7d131fe711 Update TODO list 2018-01-03 08:32:57 -06:00
Gregory Nutt
e7db11fc55 arch/arm/src/lpc54xx: LPC54xx Ethernet driver no long depends on EXPERIMENTAL. 2018-01-02 11:17:25 -06:00
Gregory Nutt
d04f166d84 arch/arm/src/lpc54xx: Add some hooks for future 802.1q VLAN support. configs/lpcxpresso-lpc54628: Automatically bring up network in the netnsh configuration. 2018-01-02 08:49:09 -06:00
David Alessio
1be5d96c6e Merged in david_alessio/nuttx/add-FPU-to-ostest (pull request #562)
Add FPU to xmc4 ostest

* remove +x from makefiles

* preserve .gdbinit across make clean

* add FPU support to ostest on xmc4

* add FPU test to ostest on xmc4

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-02 13:35:26 +00:00
Gregory Nutt
c3d3e91a3f arch/arm/src/lpc54xx: Correct handling of the Ethernet RBU error. With this fix, Ethernet now appears to be fully functional although still undertested. 2018-01-01 15:08:19 -06:00
Gregory Nutt
3c65be8c1a arch/arm/src/lpc54xx: Fix a few more Ethernet issues related to buffer management and address filtering. 2018-01-01 08:54:31 -06:00
Gregory Nutt
fd10eaf1fb arch/arm/src/lpc54xx: Fix several more issues in bring-up of Ethernet driver. Still not fully functional. 2017-12-31 17:16:21 -06:00
Gregory Nutt
f624c504d1 arch/arm/src/lpc54xx: Fixes a few more Ethernet bring up bugs. Rx seems to work; Tx does not. 2017-12-31 14:49:13 -06:00
Gregory Nutt
b2adb4917f arch/arm/src/lpc54xx: Add register level debug output for Ethernet testing. Fixed a few start up problems. Still hangs on start-up, however. 2017-12-31 11:11:57 -06:00
Gregory Nutt
f23fb9dd14 arch/arm/src/lpc54xx: Completes basic packet transfer logic for Ethernet drivers. Still some unfinished logic for IPv6 multicast logic and for various non-mainstream configurations. But it is ready for tested. configs/lpcxpresso-lpc54628: Add a netnsh configuration that will be used to test the Ethernet driver. Untested on initial commit. 2017-12-30 12:51:57 -06:00
Gregory Nutt
cb9e1e7716 arch/arm/src/lpc54xx: Add some Ethernet PHY initialization logic. 2017-12-27 12:01:24 -06:00
Gregory Nutt
f5c5f89592 arch/arm/src/lpc54xx: Add (incomplete) Ethernet register definition file. Add framework for an Ethernet driver. Initial commit is just the drivers/skeleton.c with naming updated for the LPC54. 2017-12-26 12:55:58 -06:00
Gregory Nutt
edef041f93 arch/arm/src/lpc54xx: Add support for a random number generator. 2017-12-26 10:20:41 -06:00
Gregory Nutt
0b91074850 arch/arm/src/lpc54xx: Add an RTC driver and a RTC character driver lower half. configs/lpcxpresso-lpc54628: Add logic to register the RTC character driver if it is enabled. Enable the RTC and RTC character driver in the NSH configuration. 2017-12-25 13:56:06 -06:00
Gregory Nutt
7e7bdd181f Cosmetic fixes to comments, README, and other trivial corrections. 2017-12-25 10:45:47 -06:00
Gregory Nutt
382989a1b9 arch/arm/src/lpc54xx: DMA driver is code compelete. Untested and still needs more review. 2017-12-24 14:28:39 -06:00
Gregory Nutt
321c524c5f arch/arm/src/lpc54xx: Add DMA register definition file and skeletal DMA driver. The initial commit of the DMA driver is simply the LPC43xx GPDMA driver with name changes and all all register access removed. 2017-12-24 10:55:46 -06:00
Gregory Nutt
7ce881051a lpc43/lpc54 SDMMC: Add missing test for response errors in interrupt handler. 2017-12-23 18:13:53 -06:00
Gregory Nutt
0a5d9af33c lpc43/54 SDMMC: Remove some useless code. lpc54: Fix typos in the IOCON register definition file. Lpcxpresso-Lpc54628: Fix typols in board.h file 2017-12-23 14:25:21 -06:00
Alan Carvalho de Assis
fa234a7026 configs/bambino-200e: Add LPC43 SDMMC board support to Bambino-200E and fix errors/warns 2017-12-22 12:30:36 -06:00
Alan Carvalho de Assis
3ce21c5fe1 arch/arm/src/lpc43xx: Fix some small issues on LPC43 SDMMC driver 2017-12-22 10:23:09 -06:00
Gregory Nutt
c431177c0f LPC54xx: Update a README; fix a error in a DEBUGASSERTION in the SDMMC driver. 2017-12-21 12:19:15 -06:00
Gregory Nutt
31db67cad7 arch/arm/src/lpc54xx: SDMMC pin configurations should have SLEW on and FILTER off. 2017-12-20 11:47:30 -06:00
Gregory Nutt
c867d42018 arch/arm/src/lpc54xx: Add support for card detect and write protect to SDMMC driver. configs/lpcxpresso-lpc54628: Add logic to bring up SDMMC. 2017-12-20 10:52:05 -06:00
Alan Carvalho de Assis
d66b2b0714 This commit adds support for stm32f072b-disco board. This is the board. I added the LEDs of this board and tested the compilation, more tests will be needed. 2017-12-20 08:05:15 -06:00
Alan Carvalho de Assis
87bd3cd8ff Rename the configs/stm32f0discovery board directory to configs/stm32f051-discovery. There are others stm32f0discovery boards with different MCUs and different peripherals on the board. 2017-12-20 08:05:15 -06:00
Masayuki Ishikawa
c2e50351e4 Merged in masayuki2009/nuttx.nuttx/lc823450_http_streaming (pull request #560)
lc823450 http streaming

* arch/arm/src/lc823450: Use spinlock APIs in lc823450_gpio.c

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Add a warning message in up_ack_irq()

    In SMP mode, H/W interrupts should be handled on CPU0 to avoid deadlocks.

    Other changes:
    Fix a potential race condition in up_enable_irq()
    Use spinlock APIs instead of critical section APIs.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Enable HRT_TIMER in lc823450_timerisr.c

    Other changes:
    Fix style violations and call up_enable_irq() to assign CPU0 for IRQ handling.
    Use spinlock APIs instead of critical section APIs.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Fix race conditions in dma/usbdev.

    In SMP mode, critical data must be protected explicitly.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Update README.txt

    Add notes on .gdbinit and networking. Update comments on SMP.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Update defconfigs

    Enable HRT_TIMER, LC823450_MTM0_TICK, SPINLOCK_IRQ
    Enable NET_TCP_RWND_CONTROL, NXPLAYER_HTTP_STREAMING_SUPPORT (rndis only)

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-12-20 13:33:06 +00:00
Gregory Nutt
793c8b785a arch/arm/src/lpc54: Missed a change in the last commit 2017-12-19 15:11:22 -06:00
Gregory Nutt
321a7a64af arch/arm/src/lpc54xx and configs/lpcxpresso-lpc54628: Correct some SD/MMC clock divider logic. 2017-12-19 14:05:36 -06:00
Gregory Nutt
93b28017ab arch/arm/src/lpc54xx: Make the SPI driver selections EXPERIMENTAL since the SPI peripherals are not fully implemented. 2017-12-19 13:09:15 -06:00
Gregory Nutt
a8933f96bd configs/lpcxpresso-lpc54628: Fix SD/MMC clock divisor. 2017-12-19 12:43:44 -06:00
Gregory Nutt
ba1301a43a arch/arm/src/lpc54xx: Make the SDMCC driver selection EXPERIMENTAL since it has not yet been verified. 2017-12-19 12:23:37 -06:00
Gregory Nutt
5a66684293 Squashed commit of the following:
arch/arm/src/lpc54xx:  Adds the LPC54-specific clock configuration logic to the leveraged SD/MMC driver.
    arch/arm/src/lpc54xx:  Leveraged SD/MMC driver builds without error but is still missing clock configuration logic.
    arch/arm/src/lpc54xx:  Bring in LPC43xx SD/MMC driver from https://github.com/Smoothieware/smoothie-nuttx/tree/master/nuttx/arch/arm/src/lpc43xx
2017-12-19 12:09:22 -06:00
Gregory Nutt
c17651e26e arch/arm/include/lpc54xx: Add SD/MMC header file. 2017-12-19 09:12:42 -06:00
Gregory Nutt
6f897d32a2 confifgs/lpcxpresso-lpc54628: Calibrate delay loop. 2017-12-19 08:21:41 -06:00
Gregory Nutt
5a0963f0b0 drivers/ft5x06.x and related: Minor cleanup after completing the FT5x06 driver verification. 2017-12-19 07:14:02 -06:00
Gregory Nutt
d29de95996 drivers/input/ft5x06.c: Fix a problem was was causing missing reports when the touch ends. 2017-12-18 20:06:42 -06:00
Gregory Nutt
d9997846b6 Lpcxpresso-Lpc54618 and FT5x06 driver. Some improvements in configuration and the touchscreen driver improves the behavior some. Now I get the calibration screen and detect touches (but no un-touches). 2017-12-18 17:22:35 -06:00
Gregory Nutt
ead23dca30 configs/lpcxpresso-lpc54628: Add an NxWM configuration. Not yet functional. 2017-12-18 13:33:37 -06:00
Gregory Nutt
3edd670c71 configs/stm32ldiscovery: Fix a mimatched #endif introduced in recent commit. 2017-12-18 10:41:47 -06:00
Gregory Nutt
4a5e18a6db drivers/ft5x06.c: Add additional configuration options: Optimize if multi-touch capability is not used. Add options to swap X/Y and thresholding to reduce the rate of false alarm reports (with no motion). 2017-12-18 10:31:49 -06:00
Gregory Nutt
23dfc0bf06 drivers/ft5x06: Add a polled mode of operation for the FT5x06 in attempt to work around the fact that the LPCXpresso-LPC54628 chose a non-interrupt pin for the FT5x06 interrupt. Driver is still not yet functional. 2017-12-18 08:58:07 -06:00
Gregory Nutt
783d2cabee configs/indium-f7: None of the configurations would build because the claimed to support buttons, but the button code does not compile. Refreshed all configurations with the configuration tools that have all become corrupted. Somebody has been hand editing config files and fucking things up! 2017-12-18 06:57:38 -06:00
Gregory Nutt
c014400895 drivers/input/ft5x06: Fix a misconception.. WAKE is an output, not an input. 2017-12-18 06:36:44 -06:00
Gregory Nutt
8057af6724 fs/fat: Still trying to eliminate warnings in all configurations. 2017-12-17 17:10:37 -06:00
Gregory Nutt
bd8a07a4b2 configs: Still trying to get consistent name. button driver expects board to define NUM_BUTTONS, not BOARD_NUM_BUTTONS. That was changed in all board.h header files, but there are still references in configs/ C files to BOARD_NUM_BUTTONS 2017-12-17 16:54:53 -06:00
Gregory Nutt
0e6e05bf11 arch/arm/src/kinetis: Fix some compile warnings that I introduced with a possibly overzealous recent change. 2017-12-17 16:26:03 -06:00
Gregory Nutt
ac70f688a3 Update README.txt 2017-12-17 15:32:07 -06:00
Gregory Nutt
c62a9ea727 drivers/input/ft5x06.c: Add a driver for the FT5x06 capacitive, multi-touch, touchscreen controller. configs/lpcxpresso-lpc54628: Add support for the the FT5x06. Enable the driver as well as the apps/examples touchscreen test. Untested on initial commit. 2017-12-17 15:17:06 -06:00
Gregory Nutt
87252297d6 arch/arm/src/: Fix a error in last commit that was cloned in three places. 2017-12-17 14:38:20 -06:00
Gregory Nutt
a1e250697c configs/*/include; Remove prototype of xyz_boardinitialize() from board.h files. The authorative prototype is in arch/arm/src/xyz/xyz_start.h 2017-12-16 20:47:44 -06:00
Gregory Nutt
0f10f6bdec configs/*/include; Remove prototype of stm32_boardinitialize() from board.h files. The authorative prototype is in arch/arm/src/stm32*/stm32*_start.h 2017-12-16 20:02:03 -06:00
Gregory Nutt
664484bf5b configs/indium/include/board.h: Remove extra endif 2017-12-16 19:29:58 -06:00
Bob Feretich
face14b0db confgs/indium-f7: Adds support for the RAF Research Indium-F7 board. 2017-12-16 16:04:58 -06:00
Gregory Nutt
de4fc5864f arch/arm/src/lpc54xx: Fix some GPIO interrupt configuration errors. Add logic to acknowledge rising/falling edge events. config/lpcxpresso-lpc545628: Add an intermediate interrupt handler to support acknowledgement of rising and falling edge interrupts. 2017-12-16 15:34:41 -06:00
Gregory Nutt
5a12079e53 arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration. 2017-12-16 13:00:06 -06:00
Gregory Nutt
4c72f57273 arch/arm/src/lpc54xx: I2C now appears to be functional. Needs more testing. 2017-12-15 14:58:37 -06:00
Gregory Nutt
c8a8eb028f arch/arm/src/lpc54xx: Complete coding of the I2C driver. It is not yet functional and has not yet been seriously tested. config/lpcxpresso-lpc54628: Add support for I2C2 and for the I2C tool to the nsh configuration. 2017-12-15 11:38:55 -06:00
Gregory Nutt
c53d88c75c Squashed commit of the following:
arch/arm/src/lpc54xx:  LCD.. Fix some miconceptions about how the video address lines are used.
    arch/arm/src/lpc54xx:  Fix some LCD BPP and BRG vs RGB settings.
2017-12-14 10:45:53 -06:00
Gregory Nutt
43a88c1428 arch/arm/src/lpc54xx: Fix some LCD clocking. This eliminates the hang problem. That is now recognizable albeit corrupted data on the display. 2017-12-13 19:07:10 -06:00
Gregory Nutt
d93a2d4f39 arch/arm/src/lpc54xx: Add reset logic. Some changes while debugging LDC. Does not yet work (hangs). 2017-12-13 14:36:58 -06:00
Gregory Nutt
f215660296 configs/lpcxpresso-lpc54628: Add the fb configuration testing the LCD. arch/arm/src/lpc54xx: Various fixes needed to get the fb configuration to build errorfree. The configuration is not functional as of this writing. 2017-12-13 09:18:16 -06:00
Gregory Nutt
b33d7eb59f arch/arm/src/lpc54xx: Add the ported LPC1788 LCD driver to use the LPC54xx pin definitions and SYSCON. 2017-12-12 12:53:33 -06:00
Gregory Nutt
88834b6e50 arch/arm/src/lpc54xx: Add configuartion support and logic it all none, some, or all of the external RAM to the system heap. 2017-12-12 11:33:18 -06:00
Gregory Nutt
63415f9fb1 arch/arm/src/lpc54xx: Clone the LPC1788 LCD driver. The LPC54628 LCD interface is identical. The initial commit is a brute force clone. It still needs review to make sure the LDC is appropriately enabled in the SYSCON and that clocking is provided. Also, extend the SPI 'skeleton' file so that has a place to support for SPI DMA and the SPI exchange method. 2017-12-12 10:13:21 -06:00
Gregory Nutt
0cd87be495 arch/arm/src/lpc54xx: Correct the EMC divider register definition and one typo in the SDRAM setup. SDRAM is not fully functional on this board! 2017-12-12 08:24:57 -06:00
Gregory Nutt
0508048291 configs/lpcxpresso-lp54629: Add logic to configure EMC pins. arch/arm/src/lpc54xx: Correct GPIO read/write logic. Update pin configuration for EMC pins. All should have the input file offset and fast slew rate. 2017-12-11 09:07:51 -06:00
Gregory Nutt
df3404da09 arch/arm/src/lpc54xx: Various fixes for initial build of SDRAM support. Still unverified (but at least appears to be nonfatal). 2017-12-10 17:20:16 -06:00
Gregory Nutt
1f6dfc6351 arch/arm/src/lpc54xx: Bring in NXP support for external SRAM. 2017-12-10 16:52:15 -06:00
Gregory Nutt
dab97de4ea arch/arm/src/lpc54xx: Bring in NXP support for external SDRAM. 2017-12-10 16:07:30 -06:00
Gregory Nutt
77728f49f1 arch/arm/src/lpc54xx: Add EMC register definitions. Add basic build support for EMC and SDRAM. 2017-12-10 12:40:01 -06:00
Gregory Nutt
66ee22f363 arch/arm/src/lpc54628: With these changes, the LPCXpresso-LPC54628 NSH configuration is fully functional. Also adds a README file for the board. 2017-12-10 08:54:24 -06:00
Gregory Nutt
52f9128562 arch/arm/src/lpc54xx: Add USART pin configuration. Need enable IOCON and GPIO clocking. 2017-12-09 09:11:17 -06:00
Gregory Nutt
246a97008e arch/arm/src/lpc54xx: Minor updates from review of recent changes 2017-12-08 17:32:31 -06:00
Gregory Nutt
da6c604ed1 Squashed commit of the following:
configs/lpcxpresso-lpc54628:  Add support for on-board LEDs.
    arch/arm/src/lpc54xx:  Add support for GPIO/Peripheral pin configuration.
    arch/arm/src/lpc54xx/chip:  Add IOCON register definition file.
    arch/arm/src/lpc54xx:  Add GPIO and (incomplete) PINT register definition header files.
2017-12-08 13:12:07 -06:00
Masayuki Ishikawa
ab96e3fdc7 Merged in masayuki2009/nuttx.nuttx/lc823450_smp_improvement (pull request #554)
lc823450 smp improvement

* arch/arm/src/common: Apply irq_spin APIs to modifyregXX

    Replace enter_critical_section with spin_lock_irqsave.
    Replace leave_critical_section with spin_unlock_irqrestore.

    Please see 6150299f54 as well.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Do not use modifyreg32() to enable Mutex.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Modify IRQ control for i2s

    Interrupt will be handled on CPU0 with this change.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Apply irq_spin APIs to dma/syscontrol/usbdev.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Assign CPU1 to lpwork

    This change will improve load balancing for networking with RNDIS.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* drivers/audio/wm8776.c: Improve stability in SMP mode

    Apply irq_spin APIs to improbe performance.
    Repeat to process a message to avoid deadlock.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Enable SPINLOCK_IRQ and NXPLAYER in rndis

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-12-08 12:31:34 +00:00
Anthony Merlino
87291e0064 Merged in antmerlino/nuttx/photon-timer (pull request #552)
configs/photon: Adds BOARD_TIMn_FREQUENCY macros

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-12-07 19:43:23 +00:00
Gregory Nutt
8bc90a1899 This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available.
Squashed commit of the following:

    arch/arm/src/lpc54xx:  Finish off some missing logic.  Complete now execpt for GPIO and LED support.
    arch/arm/src/lpc54xx:  Add lpc54_clrpend.c
    arch/arm/src/lpc54xx:  Serial driver is complete and compiles.
    arch/arm/src/lpc54xx:  Add beginning of a serial driver (still missing some logic)
    arch/arm/src/lpc54xx:  Fleshes out low level USART intialization.
    arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half.
    arch/arm/src/lpc54xx:  Beginning of USART console support.
    arch/arm/src/lpc54xx: Completes very basic clock configuration.
    arch/arm/src/lpc54xx:  Add clocking logic (still not complete)
    arch/arm/src/lpc54xx:  Beginning of PLL configuration logic.
    arch/arm/src/lpc54xx:  Fix a few things from first compile attempt.  Compilation cannot work until I at least finish the clock configuration logic.
    arch/arm/src/lpc54xx: Addes some SysTick logic.
    arch/arm/src/lpc54xx:  Completes basic startup logic (sans clock configuration) and interrupt configuration.
     arch/arm/src/lpc54xx:  Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic.
    arch/arm/src/lpc54xx:  Add (incomplete) SYSCON register definition header file.
    arch/arm/src/lpc54xx:  Add FLEXCOMM header file.
    arch/arm/src/lpc54xx:  Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled.
    arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished)
    LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files.
    arch/arm/src/lpc54xx:  Add (incomplete) USART header file.
    Add another condition to a Kconfig; refresh a defconfig.
    arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files.
    configs/lpcxpresso-lpc54628:  Add basic build files for the LPCXpresso-LPC54628
    arch/: Basic build directory structure for the LPC54628
2017-12-07 13:30:02 -06:00
Gregory Nutt
d540f3fd60 Costmetic update to comments and README. 2017-12-02 11:14:32 -06:00
Alan Carvalho de Assis
505358b08f configs/stm32f103-minimum: Add Nunchuck board support for stm32f103-minimum board 2017-11-29 07:06:54 -06:00
Gregory Nutt
4d4029afeb Update README files 2017-11-28 14:43:36 -06:00
Gregory Nutt
472fa0cf20 Add missing file in previous commit 2017-11-28 12:54:03 -06:00
Alan Carvalho de Assis
6e22092c67 configs/stm32f4discovery/src: Add stm32f4discovery board support for Nunchuck joystick 2017-11-28 12:23:02 -06:00
Alan Carvalho de Assis
a3e6d02d8b configs/stm32f4discovery/include/board.h: Remove only I2C pin config, we can use PB6 and PB9 2017-11-28 12:20:45 -06:00
Masayuki Ishikawa
da7f0542f0 Merged in masayuki2009/nuttx.nuttx/lc823450_rndis (pull request #549)
configs/lc823450-xgevk: Add rndis configuration

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-28 04:31:16 +00:00
Masayuki Ishikawa
fb49472ec8 Merged in masayuki2009/nuttx.nuttx/lc823450_smp_audio (pull request #547)
lc823450 smp audio

* arch/arm/src/lc823450: Remove a workaround in up_cpu_paused()

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Introduce g_gpio_lock to improve write performance in SMP mode.

    NOTE: This is a tentative solution and should be replaced with more generic one.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Add a workaround in up_txready() to avoid data corruption.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Enable CONFIG_SMP for audio

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Update README.txt regarding SMP audio

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-27 07:20:54 +00:00
Gregory Nutt
43a221f308 configs: Remove some old, redundant, obsolete boilerplate regarding toolchains that has been cloned into most of the board README files. 2017-11-26 11:36:03 -06:00
Gregory Nutt
b7eaec3de3 configs/stm3240g-eval: Add support for pdcurses and the pdcurses demo programs in the 'fb' configuration. 2017-11-26 06:32:43 -06:00
Gregory Nutt
5328e3bafb configs/: CONFIG_QENCODER was renamed to CONFIG_SENSORS_QENCODER: update occurrences in several Kconfig files 2017-11-25 18:46:43 -06:00
Alan Carvalho de Assis
674b331f03 arm/src/xmc4: Include Alt. Interrupt Enable to RX_EVENTS and rename serial GPIO configurations. 2017-11-25 18:13:23 -06:00
Gregory Nutt
38dc3fe442 STM3240G-EVAL: Mount procfs if enabled. 2017-11-25 18:03:01 -06:00
Gregory Nutt
c2c2c4f111 drivers/lcd: Make LCD driver configuration indepently selected from NX graphics configuration. This makes things awkward and loses some error checking but is a necessary step in order to make LCD drivers usable when the NX graphics system is disabled. 2017-11-25 13:13:30 -06:00
Gregory Nutt
5c27c0dad4 STM32F4 Discovery: Fix some errors do missing inclusion of stm32_gpio.h 2017-11-25 12:06:22 -06:00
Gregory Nutt
3657723208 drivers/lcd: Add support for external LCD initialization required by some board logic. configs/zpa214xpa: Tried to get the LCD working again unsuccessfully. Too much bit rot I suppose. 2017-11-25 11:41:21 -06:00
Gregory Nutt
776b65bc90 Revert "arch/arm/src/xmc4: Serial fix... Cannot use SR1 for RXD. It will not work on this hardware. This means that no more than on UART can be configured per USIC."
This reverts commit 88982df09c.
2017-11-25 09:45:12 -06:00
Gregory Nutt
88982df09c arch/arm/src/xmc4: Serial fix... Cannot use SR1 for RXD. It will not work on this hardware. This means that no more than on UART can be configured per USIC. 2017-11-25 08:19:43 -06:00
Gregory Nutt
b2764a9e4b graphicx/nxmu: nx_server() should be static. 2017-11-25 06:54:13 -06:00
Alan Carvalho de Assis
639f77341a arch/arm/src/xmc4: Remove hard-coded values in clock configuration. USB will be fixed later. 2017-11-25 06:39:44 -06:00
Gregory Nutt
288db5c7b5 configs/xtrs: Removed the XTRS configuration This was an unverified port of NuttX to a TRS-80 simulator. It was removed because (1) it is, as I said, unverified as well as unsupported, and (2) the TRS-80 simulation is a sub-optimal platform. That platform includes a 16-bit ROM image and only a 48Kb RAM space. 2017-11-24 15:21:34 -06:00
Alan Carvalho de Assis
0ac8ac240a arch/arm/src/xmc4: Do not run at 144MHz unless BOARD_FCPU_144MHZ is selected in the board.h header file. 2017-11-24 12:47:47 -06:00
Alan Carvalho de Assis
3931621bde configs/xmc4500-relax: Setup max. freq. 120MHz and setup pull-up to UART RXD pin 2017-11-24 12:31:02 -06:00
Gregory Nutt
168809764f configs: All NX configuration... Because of recent changes to libnx/nxfonts, Supported bit per pixel must be separated specified for NXFONTs too and need to match the select BPP for NX. 2017-11-24 06:33:54 -06:00
Alan Carvalho de Assis
e4fcf00fc5 configs/stm32f4disovery: Add support for JLX12864G display on STM32F4 Discovery board 2017-11-23 08:41:16 -06:00
Anthony Merlino
3be15c0f8f clicker2-stm32: Adds support for USB RNDIS device 2017-11-22 14:03:58 -05:00
Gregory Nutt
af65eac4f2 net/icmp and icmpv6: Fix some errors in debug assertions introduced with last changes in this area. Also updates a REAME.txt file 2017-11-22 11:38:17 -06:00
Gregory Nutt
d1aead1d8c configs/lm3x*/README.txt: Remove some old, redundant, obsolete stuff from some README.txt files. 2017-11-22 06:54:47 -06:00
Alan Carvalho de Assis
389cc49447 configs/stm32f103-minimum: Add framebuffer driver initialization for stm32f103-minimum board 2017-11-22 06:32:36 -06:00
Gregory Nutt
bcc61fed26 Update a README and a misnamed formal parameter. 2017-11-21 09:24:25 -06:00
Miha Vrhovnik
8bb54368c8 Various fixes for errors ound while debugging OTG on L496
STM32, STM32 L4, and STM32 M4: USB OTGFS DMA trace output fix
STM32: Add dump buffer feature to stm32 F4 series
STM32 and STM32 L4: Fix bad USB OTGFS register address
STM32 L4:  Fix typo in USB OTGFS register usage
STM32 L4:  Add check in USB OTGFS driver to assure that SYSCFG is enabled
Nucleo-L496ZG:  Make HSE on Nucleo-L496ZG default to enable USB
2017-11-21 06:32:53 -06:00
Gregory Nutt
b9bb2253b6 Update a README. 2017-11-21 06:12:13 -06:00
Gregory Nutt
1fba8ba145 configs/open1788: Enable discrete joystick input. This is sufficient to get through all menuing that does not require text input. 2017-11-20 14:16:01 -06:00
Gregory Nutt
92a9a9b678 configs/open1788: Add support for the discrete joystick driver. Update the pdcurses configuration to use apps/examples/djoystick. 2017-11-20 10:00:52 -06:00
Gregory Nutt
34bae015df Squashed commit of the following:
libnx/nxfonts:  Cosmetic; reduce amount of debug output.
    configs/open1788/pdcurses:  Add a configuration for testing pdcurses.
2017-11-19 13:31:04 -06:00
Alan Carvalho de Assis
494d2a486c configs/mcb1700: Add support for Keil MCB1700 board 2017-11-18 10:57:25 -06:00
Gregory Nutt
28de00a90a Changes to allow the font subsystem to be built without enabling the entire graphics system (CONFIG_NX). Adds CONFIG_NXFONTS and CONFIG_NXGLIB. NX and NXFONTS are still pretty heavily entangled
Squashed commit of the following:

    libnx: Need to duplicate some Kconfig setting for NXFONTs if it can be configured and built independently of NX.  Also includes some build-related fixes.

    configs/sim:  Disable NX graphics support in the fb configuration.

    libnx:  Basic configuration and build changes to support building font support independend of the NX server.
2017-11-18 10:19:34 -06:00
Bob Feretich
fab5faf097 STM32F7: Completes architecture support for the STM32 F72x and F73x families. Adds support for the Nucleo-144 boards with STM32F722. 2017-11-18 07:55:50 -06:00
Bob Feretich
13b52da3fa stm32 f72xx and f73xx: Add register definition header files and clocking logic 2017-11-17 07:18:02 -06:00
Alan Carvalho de Assis
4f0c4b798f configs/xmc4500-relax: Add config for UART3 on RXD P0.0 and TXD P0.1 pins. 2017-11-16 13:53:01 -06:00
Alan Carvalho de Assis
fcb5129567 arch/arm/src/xmc4: Kconfig was not selecting XMC4_USIC for USIC1. 2017-11-16 13:51:17 -06:00
Gregory Nutt
0649209725 configs/stm3220g-eval/ide: Remove the uVision IDE setup. This has not been used for years and it a maintenance problem for me. 2017-11-16 08:51:49 -06:00
Gregory Nutt
aeab28ef5c configs/stm32f429i-disco/ide: Remove the uVision IDE setup that goes along with the ltdc configuration that was removed on 2017-10-28. 2017-11-16 07:56:30 -06:00
Gregory Nutt
a958349353 STM32F429i-Disco: Convert NxWM configuration to use LTDC framebuffer driver instead of SPI serial. Also reduce number of layers from 4 to 1 in fb configuration. Only one layer is used. 2017-11-15 11:47:14 -06:00
Gregory Nutt
37ca491be6 Build system: Fix CONFIG_BUILD_KERNEL logic directories that have ubin and kbin subdirectories. Conditional logic was fine for CONFIG_BUILD_FLAT and CONFIG_BUILD_PROTECTED but generated useless dependencies if CONFIG_BUILD_KERNEL. 2017-11-15 11:39:30 -06:00
Masayuki Ishikawa
ccc52e70d5 Merged in masayuki2009/nuttx.nuttx/lc823450_built_on_cygwin (pull request #535)
configs/lc823450-xgevk: Fix compilation errors on Cygwin

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-15 11:27:21 +00:00
Gregory Nutt
64bcf3ec94 configs/stm32429i-disco/src: Fix a compile error when CONFIG_BOARD_INITIALIZE is defined. 2017-11-14 16:52:22 -06:00
Gregory Nutt
62b8026976 Remove CONFIG_GRAN_SINGLE. It adds no technical benefit (other than some minor reduction in the number of interface arguments) but adds a lot of code complexity. Better without it. 2017-11-14 11:47:12 -06:00
Gregory Nutt
d99f1ca574 configs/stm32f429-disco/fb: Enable support for the STMPE811 touchscreen controller and also for the apps/exmaples/touchscreen test. 2017-11-14 10:18:03 -06:00
Gregory Nutt
d427872bd6 configs/stm32f429i-disco: Add logic to auto-mount procfs. Enable procfs in all configurations that use NSH. 2017-11-13 16:46:45 -06:00
Gregory Nutt
cd498778bd configs/stm32f429i-disco/: Fix a warning and some C comments. 2017-11-13 16:23:14 -06:00
Gregory Nutt
13b742236d Update some README files. 2017-11-13 15:49:38 -06:00
Gregory Nutt
f3cac38ed6 configs/stm32f429i-disco/fb: Refactor initialization logic so that it is a little more like other boards. Remove double initialization of framebuffer or LCD drivers (whichever is enabled). 2017-11-13 15:10:00 -06:00
Gregory Nutt
2ff9f0e5b1 configs/stm32f429i-disco/fb: Fix a compile issue. Disable all NX features in the fb configuration. NX is not needed. 2017-11-13 14:52:10 -06:00
Gregory Nutt
bf724ddf61 configs/stm32f439i-disco: Add an fb configuration 2017-11-13 14:33:47 -06:00
Gregory Nutt
7b676c8a02 Update README.txt 2017-11-13 09:26:39 -06:00
Alan Carvalho de Assis
7d407fcbd6 Nucleo-F746ZG: Use the serial console over /dev/ttyACM0 by default. The Nucleo-F746ZG doesn't come with Arduio RS-232 shield, then it is better to use the serial over the /dev/ttyACM0 that is created automatically when the board is plugged in the computer. 2017-11-13 09:14:37 -06:00
Gregory Nutt
bfcc8fcbb6 configs/: apps/system/free has been deleted because it violates the portable POSIX OS interface. Remove CONFIG_SYSTEM_FREE=y from all defconfig files. 2017-11-13 08:03:45 -06:00
Masayuki Ishikawa
14e2b6dc5b Merged in masayuki2009/nuttx.nuttx/stm32f4discovery_rndis (pull request #533)
RNDIS support on STM32F4Discovery

* stm32f4discovery: Add stm32_netinit.c to avoid a compilation error

* stm32f4discovery: Add rndis initialization in stm32_bringup.c

    NOTE: MAC address for the host side starts 0xaa.  This assignment
    scheme should be fixed later.

* stm32f4discovery: Add rndis configuration

    NOTE: STM32F4Discovery + DM-STF4BB

* drivers/usbdev/rndis.c: Fix some issues in rndis.c

    Introduce rndis_transmit() and change rndis_rxdispatch() to avoid
    packet corruption. Introduce max packet size for dual speed which
    is mainly used for high speed mode. Fix adjusting MTU warning
    on Linux host. Fix data corruption if a packet size excceds MTU.

    NOTE: Max packet size is not configured dynamically. This should
    be fixed in the future version.

* stm32f4discovery: Modify #ifdef condition for rndis in stm32_bringup()

* drivers/usbdev/rndis.c: Change HPWORK to ETHWORK

* drivers/usbdev/rndis.c: Merge the commit 07b98ccbb5

    Previous commit b09365784a was based on old rndis.c thus resulted
    in reverting the commit 07b98ccbb5. This change merges the commit.

    NOTE: In the commit 07b98ccbb5, max packet size of bulkout was
    assumed to be 64. In this commit, priv->epbulkout->maxpacket is
    used instead.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-13 08:55:41 +00:00
Gregory Nutt
b238ede68f configs/stm32l476-mdk: Repartition bring-up logic so that it is more like other board directories. Add support for USERLED driver. Add bring-up initialization logic for the USERLED driver. 2017-11-12 13:24:13 -06:00
Gregory Nutt
d594d1f56e configs/stm32l476-mdk: Add support for the on-board LEDs. 2017-11-12 12:56:38 -06:00
Gregory Nutt
8b64f8ae49 Update README.txt 2017-11-12 11:41:20 -06:00
Gregory Nutt
5004e8b3ea libc: Add support for readv() and write(). Also includes some cosmetic changes to some unrelated files. 2017-11-11 11:44:14 -06:00
Gregory Nutt
f41d968455 tools/configure.c: Trivial design improvement to last commit. 2017-11-10 09:39:06 -06:00
Gregory Nutt
f748d01a53 Update README 2017-11-10 09:01:39 -06:00
Gregory Nutt
efd798661a Update README again 2017-11-09 16:42:42 -06:00
Gregory Nutt
baf120043e Update README 2017-11-09 16:32:20 -06:00
Masayuki Ishikawa
da78c18397 Merged in masayuki2009/nuttx.nuttx/lc823450_autoled (pull request #532)
lc823450 auto LED support

* arch/arm/src/lc823450: Add auto LED for CPU activity

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Add auto LED support

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-09 11:36:33 +00:00