Fixes is stuttering output.
The use of the semaphore was causing blocking
on non blocking callers. This ensured that
the TX DAM would be restated, but when it
was switched to trywait in 660ac6, it left
data in the xmit queue unsent.
This solution removes the semaphore and restart
the DMA on completion if there is more data in
the xmit queue to be sent.
chip/sam_emac.c:3754:11: error: 'struct sam_emac_s' has no member
named 'phytype'
3754 | if (priv->phytype == SAMV7_PHY_KSZ8061)
| ^~
make[3]: *** [Makefile:167: sam_emac.o] Error 1
Member phytype is available only if CONFIG_NETDEV_PHY_IOCTL and
CONFIG_ARCH_PHY_INTERRUPT is set.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Fixes stuttering output.
The use of the semaphore was causing blocking
on non blocking callers. This ensured that
the TX DAM would be restated, but when it
was switched to trywait in 8362e314, it left
data in the xmit queue unsent.
This solution removes the semaphore and restart
the DMA on completion if there is more data in
the xmit queue to be sent.
This prevents dma stop operations called of a completion
call back from rentering, the callback and ensures that
the call back will see the idle state.
1. Configurable mapping of virtual address to psram physical address
2. Access SPIRAM memory at high physical address through bank switching
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
Since picolibc used by clang-17 does not provide an implementation of libm,
if you want to use clang, please must specify a libm as an option.
Signed-off-by: chao an <anchao@xiaomi.com>
armv6-m/arm_dumpnvic.c: In function 'arm_dumpnvic':
armv6-m/arm_dumpnvic.c:67:13: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'uint32_t' {aka 'long unsigned int'} [-Wformat=]
67 | _info(" IPR%d: %08x IPR%d: %08x IPR%d: %08x IPR%d: %08x\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
armv6-m/arm_dumpnvic.c:67:27: note: format string is defined here
67 | _info(" IPR%d: %08x IPR%d: %08x IPR%d: %08x IPR%d: %08x\n",
| ~~~^
| |
| unsigned int
| %08lx
Signed-off-by: chao an <anchao@xiaomi.com>
chip/stm32_ethernet.c:2014:7: warning: variable 'i' set but not used [-Wunused-but-set-variable]
2014 | int i;
| ^
1 warning generated.
Signed-off-by: chao an <anchao@xiaomi.com>
To avoid losing the first frame, the set_buf needs to excute first. At the same time, imgdata->start_capture should excuted before the imgsensor->start_capture.
Signed-off-by: yaojingwei <yaojingwei@xiaomi.com>
The divider should be rounded to the next full integer to ensure that
the resulting SPI frequency is <= target frequency, i.e. the SPI is
not overclocked.
After this, RISC-V fully supports the kmap interface.
Due to the current design limitations of having only a single L2 table
per process, the kernel kmap area cannot be mapped via any user page
directory, as they do not contain the page tables to address that range.
So a "kernel address environment" is added, which can do the mapping. The
mapping is reflected to every process as only the root page directory (L1)
is copied to users, which means every change to L2 / L3 tables will be
seen by every user.
Replace DEBUGASSERTs with sanity checks. DEBUGASSERT()s are
not necessarily enabled at all, thus risking the functionality
especially in that case. Remove PANICs as well.
Don't enable the ihc irq too early. If enabled, and the master
is already up, the irq is being issued so that the system gets
stuck or is severely slowed down. Master may be already up if
this NuttX hart only is rebooted, for example.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
When setting the essid that contains the special characters (\"'),
we need to add an escape (\) for them.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
Version 1.3.1 is the latest tagged version as of November
the 21st, 2023. This patch prepares the required changes
to make v1.3.1 work.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Adds support for hardware timestamping of received Ethernet packets.
The timestamp is available to applications using socket option SO_TIMESTAMP.
Optionally, the Ethernet PTP timer can be used as system high-resolution RTC.
In this mode it supports fine resolution rate adjustment.
Alternatively other time source for CLOCK_REALTIME can be used, and the
PTP timestamps are converted by sampling the clocks and computing the
difference. This results in a few microseconds of uncertainty.
The halt operation may be causes the raw epread data segment lost, and
usb ep_queue can handle when the usb buffer is full. so remove the
relevant operations.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Summary:
- Temporarily disables ARCH_HAVE_FORK for arm64 to address a crash issue,
as detailed in https://github.com/apache/nuttx/pull/9755.
- This is a precautionary measure until a more permanent solution is implemented.
Impact:
- Temporarily limits certain functionalities on arm64,
but necessary to ensure system stability.
Testing:
- Successfully tested on QEMU-8.1.2.
- Note: please apply the changes from https://github.com/apache/nuttx-apps/pull/1962.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
1. If CONFIG_ESP32S3_PHY_INIT_DATA_IN_PARTITION and CONFIG_ESP32S3_SUPPORT_MULTIPLE_PHY_INIT_DATA are enabled,
PHY initialization data (PHY initialization data is used for RF calibration) will be loaded from a partition.
2. The corresponding PHY init data type can be automatically switched according to the country code,
China's PHY init data bin is used by default, country code can be modified through the wapi command: wapi country <ifname> <country code>.
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
If using flow control with a high CTS the thread may be
blocked forever on the second transmit attempt due to waiting
on the txdma semaphore. The calling thread can then never
make progress and release any resources it has taken, thus
may cause a deadlock in other parts of the system.
The implementation differs in behavior from interrupt-driven
TX. It should not implicitly wait on a taken semaphore but
return immediately and let the upper layers decide on what to
do next.
If using flow control with a high CTS the thread may be
blocked forever on the second transmit attempt due to waiting
on the txdma semaphore. The calling thread can then never
make progress and release any resources it has taken, thus
may cause a deadlock in other parts of the system.
The implementation differs in behavior from interrupt-driven
TX. It should not implicitly wait on a taken semaphore but
return immediately and let the upper layers decide on what to
do next.
If using flow control with a high CTS the thread may be
blocked forever on the second transmit attempt due to waiting
on the txdma semaphore. The calling thread can then never
make progress and release any resources it has taken, thus
may cause a deadlock in other parts of the system.
The implementation differs in behavior from interrupt-driven
TX. It should not implicitly wait on a taken semaphore but
return immediately and let the upper layers decide on what to
do next.
This commit sets the BLE's interrupt as a IRAM-enabled interrupt,
which enables it to run during a SPI flash operation. This enables
us to create a cache to off-load semaphores and message queues
operations and treat them when the SPI flash operation is finished.
By doing that, we avoid packet losses during a SPI flash operation.
This commit provides an interface to register ISRs that run from
IRAM and keeps track of the non-IRAM interrupts. It enables, for
instance, to avoid disabling all the interrupts during a SPI flash
operation: IRAM-enabled ISRs are, then, able to run during these
operations.
It also makes the code look more similar to the ESP32-S3 SPI flash
implementation by creating a common `esp32_spiflash_init` that is
responsible to create the SPI flash operation tasks. The function
intended to initialize the SPI flash partions was, then, renamed to
`board_spiflash_init`.
Whenever we enter/leave a critical section, the interrupt status is
saved and, then, restored. However, for the ESP32's BLE adapter,
entering/leaving a critical section is done on separate functions
that need to be registered as a callback.
The status flag was being saved as a global variable. However,
calling nested enter_critical_section would overwrite this global
variable that was storing the previous flag and, when leaving the
last critical section, the restored status would be different from
the one expected. The proposed solution for this issue is to create
a global array to store the interrupt status flags for nested calls.
If using flow control with a high CTS the thread may be blocked forever
on the second transmit attempt due to waiting on the txdma semaphore.
The calling thread can then never make progress and release any
resources it has taken, thus may cause a deadlock in other parts of the
system.
The implementation differs in behavior from interrupt-driven TX and the
STM32F7 TXDMA . It should not implicitly wait on a taken semaphore but
return immediately and let the upper layers decide on what to do next.
Some APIs are implemented both in common code and CHIP-specific code,
and the link needs to be based on the implementation in CHIP, so move
NUTTX_CHIP_ABS_DIR before common src.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Because there is no pre-encoding length of the ssid, the ssid including
the Chinese characters whose length is less than 32 after encoding
cann't be translated.
For example, the ssid name is `word人`. After encoding it is `world\xe4\xba\xba` and will not be decoded.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
These flags are not used in the code.
SERIAL_HAVE_RXDMA and SERIAL_HAVE_TXDMA flags are used instead.
STM32_UART_TXDMA flag is not even defined in Kconfig
Connecting the static page tables to each other was done with the page
table virtual address (riscv_pgvaddr) when the page table physical address
is needed.
I can never remember whether the static page table list contains the
table's physical or kernel virtual address.. Add the fact as a comment
there.
Also add the limitations that come from this static page table approach
for Sv32.
The SSID can be configured with special symbols suach as single
quotations, double quotations and backslashes, which need to be escaped.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
This adds option to do PMP configuration via mpfs_board_pmp_setup instead
of just opening up everything. In this case, it is up to the specific
board to implement the PMP configuration in whichever way it sees fit.
With TCD set to loop, there is a window where the
DMA has raised Done, but not reloaded the TCD, resetting
count and clearing Done.
In this window imxrt_dmach_getcount could then return 0.
Resulting in imxrt_dma_nextrx returning RXDMA_BUFFER_SIZE.
Which is not a valid index in the FIFO.
Since the count will be set to RXDMA_BUFFER_SIZE. When the DMA
engine completes the TCD reload. The imxrt_dma_nextrx would
return 0. Therefore:
(RXDMA_BUFFER_SIZE - dmaresidual) % RXDMA_BUFFER_SIZE
accomplishes this.
With TCD set to loop, there is a window where the
DMA has raised Done, but not reloaded the TCD, resetting
count and clearing Done.
In this window imxrt_dmach_getcount could then return 0.
Resulting in imxrt_dma_nextrx returning RXDMA_BUFFER_SIZE.
Which is not a valid index in the FIFO.
Since the count will be set to RXDMA_BUFFER_SIZE. When the DMA
engine completes the TCD reload. The imxrt_dma_nextrx would
return 0. Therefore:
(RXDMA_BUFFER_SIZE - dmaresidual) % RXDMA_BUFFER_SIZE
accomplishes this.
With TCD set to loop, there is a window where the
DMA has raised Done, but not reloaded the TCD, resetting
count and clearing Done.
In this window imxrt_dmach_getcount could then return 0.
Resulting in imxrt_dma_nextrx returning RXDMA_BUFFER_SIZE.
Which is not a valid index in the FIFO.
Since the count will be set to RXDMA_BUFFER_SIZE. When the DMA
engine completes the TCD reload. The imxrt_dma_nextrx would
return 0. Therefore:
(RXDMA_BUFFER_SIZE - dmaresidual) % RXDMA_BUFFER_SIZE
accomplishes this.
With DMA enabled on some I2C channels but not all
the Non DMA channels were failing.
The cause was condition the status with only the enabled
interrupts on non DMA chennels. This conditioning needs
to only happen in DMA enabled channels
With DMA enabled on some I2C channels but not all
the Non DMA channels were failing.
The cause was condition the status with only the enabled
interrupts on non DMA chennels. This conditioning needs
to only happen in DMA enabled channels
With DMA enabled on some I2C channels but not all
the Non DMA channels were failing.
The cause was condition the status with only the enabled
interrupts on non DMA chennels. This conditioning needs
to only happen in DMA enabled channels
The DMA can bring in more rx data, than the number of
DMA completions call backs. The call back happen on
idle, 1/2 and full events. But in between these events
the DMA can write more data to the buffers memory that
need to be brought in to the cache. (invalidate)
We do the invalidate on the reads from the fifo memory
if the the DMA as commited since the last read.
Previously, GPIO interrupts were not correctly mapped to the peripheral base register responsible for the interrupt.
Change the IRQ number calculation so the interrupts work correctly on all GPIO peripheral bases.
When ESP32's BLE is enabled, select the option to pin the HCI TX
thread to a specific core. This is necessary to avoid problems
with the BLE task that runs pinned to the PRO CPU (core 0) while
running with SMP enabled.
For TOR: Any size and 4-byte aligned address is required
For NA4: Only size 4 and 4-byte aligned address is good
For NAPOT: Minimum size is 8 bytes, minimum base alignment is 8 bytes,
and size must be power-of-two aligned with base
This commit simplifies these checks and removes all the nonsense added
by a misunderstanding of how the MPFS / Polarfire SoC's PMP works.
These options are just wrong and a result of misunderstanding of the
Polarfire SoC spec. There are no feature limitations in the CPU PMP
implementation -> remove any configuration options added.
Summary:
- I noticed that irq is enabled explicitly in arm64_cpu_idle.S
- The code is unnecessary since tasks, including the idle task,
are created with irq enabled in up_initial_state()
Impact:
- Should be none
Testing:
- qemu-armv8a:netnsh_smp_hv with qemu-7.2.4
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Fix case where NULL is de-referenced via tx/rx buffer or descriptor. Only
1 queue is currently set up for each, so the indices 1,2,3 are not valid
and should not be handled.
Before code is executed after being loaded into memory,
it is necessary to ensure the consistency of I and D cache.
The up_coherent_dcache function will flush the dache and
invalidate the icache to ensure cache consistency.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Only when SCTLR_ELn.WXN is set to 1, regions that are writable at ELn
are treated as non-executable. Therefore, when SCTLR_ELn.WXN is set to
0, regions that are writable at ELn can be executed, so the writable
attribute cannot be used to restrict the executable attribute.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
To compile arm64 NuttX, use the following command:
./tools/configure.sh -l qemu-armv8a:nsh_fiq
To run，use the following command
qemu-system-aarch64 -cpu cortex-a53 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Add the Sim WiFi function, which can provide the wifi operating on nuttx sim emulator,
and support two modes that simulate wifi, HWSIM and RNC(real network card).
- In the HWSIM mode, we simulates two wlan interfaces. The wlan0 is STA and
the wlan1 is AP. The wlan0 can connect to the wlan1 in the nuttx simulator.
- In the RNC mode, we can use the same wlan interface name on the nuttx simulator
to control the connection behavior of the real wireless card.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
The BIT macro is widely used in NuttX,
and to achieve a unified strategy,
we have placed the implementation of the BIT macro
in bits.h to simplify code implementation.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
