move board configs to configs folder
* amber: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arduino-due: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arduino-mega: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* avr32dev1: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* axoloti: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* b-l072z-lrwan1: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* b-l475e-iot01a: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* bambino-200e: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* beaglebone-black: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* c5471evm: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* clicker2-stm32: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* cloudctrl: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* demo9s12ne64: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* dk-tm4c129x: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ea3131: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ea3152: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* eagle100: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* efm32-g8xx-stk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* efm32gg-stk3700: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ekk-lm3s9b96: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* esp32-core: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ez80f910200kitg: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ez80f910200zco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* fire-stm32v2: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* flipnclick-pic32mz: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* flipnclick-sam3x: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k28f: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k64f: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k66f: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k125z: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k126z: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* gapuino: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* hymini-stm32v: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* imxrt1050-evk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* imxrt1060-evk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* kwikstik-k40: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-cc1310: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-cc1312r1: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-tms57004: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lc823450-xgevk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lincoln60: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s6432-s2e: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s6965-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s8962-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm4f120-launchpad: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4088-devkit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4088-quickstart: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4330-xplorer: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4337-ws: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4357-evb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4370-link2: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpcxpresso-lpc1768: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpcxpresso-lpc54628: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* makerlisp: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* maple: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* max32660-evsys: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mbed: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mbc1700: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mcu123-lpc214x: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* metro-m4: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* micropendous3: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mikroe-stm32f4: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mirtoo: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* misoc: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* moteino-mega: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* moxa: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ne64badge: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nr5m100-nexys4: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nrf52-generic: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ntosd-dm320: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-144: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f072rb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f091rc: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f103rb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f207zg: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f302r8: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f303re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f303ze: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f334r8: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f410rb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f446re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f4x1re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-g071rb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-h743zi: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l073rz: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l152re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l432kc: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l452re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l476rg: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l496zg: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nutiny-nuc120: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-efm32g880f128-stk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc-h3131: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc1766stk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc2378: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-e407: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-h405: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-h407: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p107: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p207: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p407: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-strp711: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimexino-stm32: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* omnibusf4: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* open1788: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* or1k: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* p112: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pcduino-a10: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* photon: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pic32mx-starterkit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pic32mx7mmb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pic32mz-starterkit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pnev5180b: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* qemu-i486: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sabre-6quad: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam3u-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4cmp-db: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4e-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4l-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4s-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4s-xplained-pro: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d2-xult: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d3-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d3x-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d4-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samd20-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samd21-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* same70-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* saml21-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samv71-xult: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* shenzhou: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sim: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* skp16c26: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* spresense: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3210e-eval: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3220g-eval: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3240g-eval: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32_tiny: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32butterfly2: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f051-discovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f072-discovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f103-minimum: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f334-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f3discovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f411e-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f429i-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f4discovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f746-ws: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f746g-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f769i-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l476-mdk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l476vg-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l4r9ai-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32ldiscovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32vldiscovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sure-pic32mx: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* teensy-2.0: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* teensy-3.x: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* teensy-lc: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tm4c123g-launchpad: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tm4c1294-launchpad: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tms570ls31x-usb-kit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* twr-k60n512: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* twr-k64f120m: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* u-blox-c027: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ubw32: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* viewtool-stm32f107: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* us7032evb1: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* xmc4500-relax: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z16f2800100zcog: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z80sim: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z8encore000zco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z8f64200100kit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* zkit-arm-1769: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* zp214xpa: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tools: configure.sh: adjust the script to use boards/configs folder
Script update to pick the configs from the new configuration folder
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tools: configure.bat: adjust the script to use boards/configs folder
Now we update the script to pick the configs from the new configuration folder
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Move boards to boards folder
* boards: rename configs folder to boards
This is the proposed layout after the change:
boards: - folder containing board folders
<board>: - name of each board
drivers: - extra drivers specific for platform
include: - header files for the boars
scripts: - extra scripts specific for platform
src: - board specific code
tools: - extra tools specific for platform
<config>: - board specific configuration(s)
Note:
<xxx> names are dependent on platform
This is a logical change to aim to the arch layout but this is a
huge change it should be done in several steps to lower the risk.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Kconfig: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile.*: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Make.defs: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .sh: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .mk: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .c & .h: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .bat: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
tools: add flash_writter for cxd56 boards
this flash writter is using the xmodem for firmware transfer
for flashing please use
tools/flash_writer.py -s -c /dev/ttyUSB0 -d -b 115200 -n nuttx.spk
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Mastertools: add spk binary format and entry point for mpy
* tools: add spk binary format
The .spk binary format is used on spresense and other boards
based on the cxd56 arch.
to enable this binary format please set in your config
CONFIG_CXD56_BINARY=y
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* configs: spresense: buils nuttx.spk images
Enable nuttx.spk binary image that can be flashed on spresense board.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* configs: spresense: add entry point for mpy
The entry point is needed for the downstream projects based
on spresense.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Fixed coding standard error in several files. Use of while( is incorrect; a space is required between while and (. Also ran tools/nxstyle and fix thoses complaints as well in most files.
Changes to comply with coding standard. Mostly focused on files with missing space after keyword in if(, switch(, and for(. Offending files also got changes to comply with tools nxstyle. If there were logs of nxstyle complaints, the file also got a taste of tools/indent.sh. Still need to fix occurrences of while( with missing space. There are a lot of them.
Squashed commit of the following:
sched/sched/sched_getsockets.c: Fix an error in conditional compilation.
fs/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
Documentation/: Remove all references to CONFIG_NSOCKET_DESCRIPTORS == 0
include/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
libs/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
net/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
sched/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
syscall/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
tools/: Fixups for CONFIG_NSOCKET_DESCRIPTORS no longer used to disable sockets.
Squashed commit of the following:
configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3.
fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS.
syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0
binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3
configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
1
2 //
3 // Multi-line comment
4 // The second line
5
Was generating this output:
1
2
3 * Multi-line comment
4 * The second line
5 */
6
Now correctly generates:
1
2 /* Multi-line comment
3 * The second line
4 */
5
