Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>
include/nuttx/wireless/ieee80211: Cosmetic, coding standard changes from review of last merge.
drivers/wireless/ieee80211: Cosmetic, coding standard changes from review of last merge.
configs/photon: Cosmetic, coding standard changes from review of last merge.
arch/arm/src/stm32: SDIO changes from last review: Fix a few long lines and other coding standard issues; Make additions for SDIO card support dependent on a configuration option.
Author: hhuysqt <hyq9606@126.com>
Return IEEE 802.11 MAC address just as ethernet does
Modifyed bcmf_board_setup_oob_irq declaration
Modified OOB ISR function types
Add some logic according to WICED SDK
Bug fixed: data_offset counts in 4-bytes
Add BCM43438 logic for future developement
Add tips on using telnet
Use SDIO in-band interrupt instead of OOB interrupt, because Photon seems to unconnect the OOB interrupt line...
add SDIO in-band interrupt logic
drivers/1wire: add PM hooks and unlink support to sht21 sensor (allowing hot-swappable I2C bus from 1-wire converter)
* drivers/1wire: add PM hook to 1wire bus
* drivers/1wire/ds28e17.c: i2c instance must be zeroed
* drivers/sht21: add unlink support
Unlike most other unlink implementations in NuttX drivers, this one
does not allow any I2C operations after unlink, making it possible to
deallocate the I2C bus.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
drivers/net: Add TAP (network bridge) mode to tun.c
In previous implementation, TAP mode did not handle a packet
correctly. Also, the driver did not set the link layer type and
could not assign the interface name. This PR changes fix such
issues and supports TAP mode correctly.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Xbee: Adds a timeout to send logic to handle case where XBee module fails to respond to a Transmit request with a Transmit Status
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
arch/arm/src/stm32: Add Kconfig options needed by the HCI UART. Various fixes to finally get a clean error free compile with no unexpected warnings.
arch/arm/src/stm32: In HCI UART, use spin_lock_irqsave() instead of enter_critical_section() whenever possible.
arch/arm/src/stm32: In HCI UART, fix up naming of configurations so that they are unique. Still needs Kconfig settings. Modify logic so that there can be multiple HCI UARTs, some supporting DMA and some not.
arch/arm/src/stm32: Integrate watermarks and software Rx flow control into the HCI UART driver.
arch/arm/src/stm32: Eliminate some HCI UART UART configuration options. Per the HCI UART spec, the link will b 8 data bits, no parity, 1 stop bit... Always.
arch/arm/src/stm32: Trivial cleanup
arch/arm/src/stm32: Fixes most initial compilation issues STM32 HCI UART driver. Still need to set up USART configuration parmeters for HCI UART
arch/arm/src/stm32: Completes first cut at STM32 HCI UART driver.
arch/arm/src/stm32: Completes most of read logic for HCI UART. Still needs to be able to block if no read data is available. Still missing write and flush logic.
drivers/wireless: Remove txenable from HCI UART methods. arch/arm/src/stm32: Reorganize some structures in HCI UART.
arch/arm/src/stm32: Still messaging the HCI uart driver.
arch/arm/src/stm32: Some trivial renaming.
arch/arm/src/stm32: A little more HCI-UART logic.
arch/arm/src/stm32: Initial setup to support HCI-UART. Little more than the serial driver with some name changes and a few things removed.
Squashed merge of the following:
Author: Gregory Nutt <gnutt@nuttx.org>
drivers/sensors: Fix some minor typos in last commit that cause some compile problems.
drivers/sensors/: Clean up some coding standard isses in LM330 and ADXL372 drivers.
drivers/sensors/README.txt: Clean up some long lines and odd line breaks.
include/nuttx/sensors: Completes coding style review of adxl372.h, cluster_driver.h, and lsm330.h.
Author: Bob Feretich <bob.feretich@rafresearch.com>
Add LSM330 SPI and ADXL372 drivers along with the cluster driver infrastructure.
Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>
Some cosmetic changes from coding style review.
Author: Juha Niskanen <juha.niskanen@haltian.com>
drivers/1wire: add 1-wire subsystem and ds28e17 driver
Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>
Fix a few remaining refereces to cc3000.
Author: Alan Carvalho de Assis <acassis@gmail.com>
drivers/wireless/cc3000: emove the driver to support CC3000 because it doesn't use the USRSOCKET
Author: Alan Carvalho de Assis <acassis@gmail.com>
configs: Remove board support to CC3000 from all relevant configurations.
Author: Gregory Nutt <gnutt@nuttx.org>
configs/spark: Removes Spark board configuration. Still available in the Obsoleted repository. This is preparation for removal of CC3000 support by Alan Carvalho de Assis. If there is no CC3000 support, then there is no purpose in supporting the Spark either.
Change all Sony related copyright to conform with our company's internal rules.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
wireless/bluetooth: This completes the basic logic path that gets frames from the Bluetooth stack and into the network layer.
wireless/bluetooth: Fleshes out some of the network packet receive logic.
wireless/bluetooth: Replace buffer allocated with primitive allocator from ieee 802.15.4.
wireless/ieee802154: Fix a few typos.
wireless/bluetooth: More renaming in preparation for some real work.
wireless/bluetooth: Some trivial renaming; update comments
Squashed commit of the following:
wireless/bluetooth: Some small changes that gets to a clean compile by just eliminating some incorrect implementations (still with a lot of warnings. The logic is still incomplete but now not so lethal.
wireless/bluetooth: Restructuring: Connection interfaces should internal to wireless/bluetooth. include/nuttx/wireless/bt_conn.h removed and merged with wireless/bluetooth/bt_conn.h. Several fix to get closer to bt_netdev.c compiling. Need to design some not interfaces and use some existing interfaces to send and receiv packets.
wireless/bluetooth: Some organization with some network device compile errors fixed. Still not even close to compiling.
net/bluetooth: Fix numerous compile issues; Still open design issues with regard to the interface with the Bluetooth stack.
wireless/bluetooth: Create bt_netdev.c with a crude copy of mac802154_netdev.c. Does not not even compile yet.
include/nuttx/net: Add bluetooth.h. Content is not yet correct.
net/netpackets: Add bluetooth.h. Update net/bluetooth to use new socket address definition.
net/bluetooth: Some fixes for initial build.
net/bluetooth: Add initial support for Bluetooth sockets. The initial cut is just the a clone of the IEEE 802.15.4 socket support with name changes.
net/ieee802154: Fix some typos noted when cloning to create net/bluetooth.
Squashed commit of the following:
drivers/bluetooth: Re-architect Bluetooth UART driver to follow upper/lower half model. Completely untested.
drivers/bluetooth: Grr.. Another band-aid commit to stay in sync with master. Why is this so difficult
drivers/bluetooth: Band-aid commit to stay in sync with master. Lost it somehow.
drivers/wireless/bluetooth: A few changes, mostly thought experiments.
drivers/wireless/bluetooth: UART-based Bluetooth driver ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. This initial commit is the original files in the NuttX build environment with changes to conform with the coding standard. It should not even build.
drivers/lcd/ft80x: ACTIVE host command appears to be formatted differently than other host commands; Fix ROM CHIPID. Appears to be big-ending, BCD.
drivers/lcd/ft80x: Fix some compile issues when debug features are enabled.
Feature pca9540bdp i2cmultiplexer
* Implement common i2c multiplexer abstraction to be reused by i2c multiplexer devices. Provide common interface with transfer and reset calls to set up virtual i2c busses.
* Remove i2cmux_lower_half.c and headers, will be implemented by each mux driver
* Implement PCA9540BDP I2C multiplexer lower half which uses the common i2c mux abstraction
* Remove application interface and implement common i2c functions
* Remove application interface from pca driver and implement common i2c functions directly in the pca driver
* Use i2cerr
Approved-by: Gregory Nutt <gnutt@nuttx.org>
cc1101: Changes from review of last PR.
remove gpio
remove cc1101 frame len
remove FLAGS_RXONLY flags
add cc1101 function
remove some waring
add cc1101 poll function
add cc1101 register
add cc1101 isr read data
add cc1101 spi deviceId
add cc1101 init2
add wait cc1101 chip ready
raw init cc1101
Author: Juha Niskanen <juha.niskanen@haltian.com>
Date: Mon Feb 19 15:03:17 2018 -0600
drivers/mtd: mtd_config.c: Add still more error handling (to detect bad underlying flash implementations)
drivers/mtd: mtd_config.c: Remove MTD_ERASE that was erasing data block instead of erase block. This is a partial revert of 4f18b4. Reported-by: Pascal Speck <iktek01@yahoo.com>
arch/arm/src/stm32l4: stm32l4_flash: change flash programming to use page buffer for unaligned writes.
drivers/lcd and include/nuttx/lcd: Add FT80x support for writing to graphics memory. Also add some definitions needed by apps/examples/ft80x for bitmap manipulation.
drivers/lcd: Review/update FT80x initializatin logic
drivers/lcd: Rename ft80x_base.c to just ft80x.c. Add logic to notify FT80X clients of events via signals.
drivers/lcd: Trivial updates to naming. Add some new definitions.
Squashed commit of the following:
drivers/lcd: Finishes off basic FT80X. Still missing some niceties.
drivers/lcd: Rethink FT80X display list interface.
drivers/lcd: More FT800x display list logic. Still not complete.
drivers/lcd: Add some basic FT80x initialization logic.
drivers/lcd: Add ft80x display list IOCTL framework. Still missing low level display list operations.
drivers/lcd: FT80x driver cannot be a standard LCD driver but must, instead, be a custom character driver.
drivers/lcd: Add FT800 co-processor commands and display list helpers.
drivers/lcd: Add SPI interface and framework for the initialization and the basic LCD driver.
drivers/lcd: Add beginnings of some FT80x implementation.
drivers/lcd: Add definitions for the FTDI FT801 part
include/nuttx/lcd/ft800.h: Add initial FT800 interface definition.
drivers/lcd: Add ft800 header file.
Added support for LIS3DH accelerometer sensor.
* Added support for LIS3DH accelerometer sensor.
* Fix line length
* Fix more line lengthts
Approved-by: Gregory Nutt <gnutt@nuttx.org>
configs/flipnclick-pic32mz: Add an nxlines configuration for use in testing the custom HiletGo Click board.
arch/mips/src/pic32mz: Correct some SPI-related typos. configs/flipnclick-pic32mz: Finishes integration of HiletGo OLED. drivers/lcd: Finish support for HiletGo OLED.
drivers/lcd: Add configuration support for HiletGo OLED. configs/flipnclick-pic32mz: Add board support for HiletGo OLED.
sched/: Convert legitimate uses of task_create() to nxtask_create(). Review handling of returned values from all uses of kthread_create() (as well as nxtask_create()).
graphics/: Review return values for all calls to kthread_start() because it no longer returns an errno.
drivers/: threads started by drivers should be kernel threads, not user tasks. Review return values for all calls to kthread_start() because it no longer returns an errno.
configs/: threads started by board bringup logic should be kernel threads, not user tasksi (part 2 of 2).
sched/task: Add nxtask_create(). Kthread_create() and nxtask_create() are internal OS functions and should not modify the errno variable. configs/: threads started by board bringup logic should be kernel threads, not user tasks.
binfmt/, configs/, grahics/, libc/, mm/, net/, sched/: OS references to the errno variable should always use the set_errno(), get_errno() macros
arch/arm/src/stm32 and stm32f7: Architecture-specific code is not permitted to modify the errno variable. drivers/ and libc/: OS references to the errno variable should always use the set_errno(), get_errno() macros
lc823450 smp improvement
* arch/arm/src/common: Apply irq_spin APIs to modifyregXX
Replace enter_critical_section with spin_lock_irqsave.
Replace leave_critical_section with spin_unlock_irqrestore.
Please see 6150299f54 as well.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Do not use modifyreg32() to enable Mutex.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Modify IRQ control for i2s
Interrupt will be handled on CPU0 with this change.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Apply irq_spin APIs to dma/syscontrol/usbdev.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Assign CPU1 to lpwork
This change will improve load balancing for networking with RNDIS.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* drivers/audio/wm8776.c: Improve stability in SMP mode
Apply irq_spin APIs to improbe performance.
Repeat to process a message to avoid deadlock.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Enable SPINLOCK_IRQ and NXPLAYER in rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support.
arch/arm/src/lpc54xx: Add lpc54_clrpend.c
arch/arm/src/lpc54xx: Serial driver is complete and compiles.
arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic)
arch/arm/src/lpc54xx: Fleshes out low level USART intialization.
arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half.
arch/arm/src/lpc54xx: Beginning of USART console support.
arch/arm/src/lpc54xx: Completes very basic clock configuration.
arch/arm/src/lpc54xx: Add clocking logic (still not complete)
arch/arm/src/lpc54xx: Beginning of PLL configuration logic.
arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic.
arch/arm/src/lpc54xx: Addes some SysTick logic.
arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration.
arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic.
arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file.
arch/arm/src/lpc54xx: Add FLEXCOMM header file.
arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled.
arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished)
LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files.
arch/arm/src/lpc54xx: Add (incomplete) USART header file.
Add another condition to a Kconfig; refresh a defconfig.
arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files.
configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628
arch/: Basic build directory structure for the LPC54628
RNDIS support on STM32F4Discovery
* stm32f4discovery: Add stm32_netinit.c to avoid a compilation error
* stm32f4discovery: Add rndis initialization in stm32_bringup.c
NOTE: MAC address for the host side starts 0xaa. This assignment
scheme should be fixed later.
* stm32f4discovery: Add rndis configuration
NOTE: STM32F4Discovery + DM-STF4BB
* drivers/usbdev/rndis.c: Fix some issues in rndis.c
Introduce rndis_transmit() and change rndis_rxdispatch() to avoid
packet corruption. Introduce max packet size for dual speed which
is mainly used for high speed mode. Fix adjusting MTU warning
on Linux host. Fix data corruption if a packet size excceds MTU.
NOTE: Max packet size is not configured dynamically. This should
be fixed in the future version.
* stm32f4discovery: Modify #ifdef condition for rndis in stm32_bringup()
* drivers/usbdev/rndis.c: Change HPWORK to ETHWORK
* drivers/usbdev/rndis.c: Merge the commit 07b98ccbb5
Previous commit b09365784a was based on old rndis.c thus resulted
in reverting the commit 07b98ccbb5. This change merges the commit.
NOTE: In the commit 07b98ccbb5, max packet size of bulkout was
assumed to be 64. In this commit, priv->epbulkout->maxpacket is
used instead.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
This conversion is unfortunate in the sense that Unix local domain sockets are relatively lightweight. LocalHost UDP sockets are much heavier weight since they rely on the full UDP stack. If anyone is up for a complete redesign, then using some shared memory and a POSIX message queue would be lightweight again.
This commit also fixes several bugs that were not testable before the inode tree deadlock. I cannot say that the logic is 100% stable but it does not have basic functionality.
Squashed commit of the following:
fs/userfs: Order locking so that access to the shared I/O buffer is also locked.
fs/userfs: Converts to use LocalHost UDP loopback for IPC.
According to the specification, the close function must wait until all data
has been written before it closes the file (except O_NONBLOCK is set). The
maximum waiting time for this is not specified.
To be able to edit the file list of the process, the close function has to lock
the file list semaphore. After that the close function of the serial driver is
called.
Waiting for the complete transmission of all data is done in the serial driver.
This causes the semaphore to remain locked until all data has been sent.
However, no other thread of the process can edit the file list for that time
(open, close, dup2, etc.). This is not optimal in a multithreaded environment.
Therefore, we have to keep the waiting time within the driver as short as possible.
ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology
* mac802154: Adds missing breaks from case statement
* sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast
* ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC
* Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS
* xbee_netdev: Network must be locked when calling sixlowpan_input
* sixlowpan: Reassembly buffer can't be freed if provided by radio driver
* sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver
* ieee802154: Adds basic logging to ieee802154_primitive.c
* Minor fixes after rebase
* xbee: Adds AT query timeout to retry if XBee doesn't respond to request
* same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice'
* mac802154: Removes unused function declaration
* drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator
* mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places.
* mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled.
* sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized.
* sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address
* net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well.
* configs/same70-xplained: Simple spelling fix
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Fix GPIO operation of STMPE811 driver.
Fixed issues:
1. STMPE811_GPIO_DIR was defined for register name
and later was redefined to be the pin direction mask
for `stmpe811_gpioconfig`
I decided to change register name to be STMPE811_GPIO_DIR_REG,
and keep pin direction mask STMPE811_GPIO_DIR, so that any
external code that already use this driver will be unchanged.
2. The STMPE811 register GPIO_DIR uses bit value 1 for output
and 0 for input, but `stmpe811_gpioconfig` set the opposite.
3. The call to `stmpe811_gpiowrite` from inside of `stmpe811_gpioconfig`
leaded to deadlock.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
net/icmpv6: IPPROT_ICMP6 socket logic now builds without error.
net/icmpv6: Add support for read-ahead and poll(). Initial commit is just cloned from ICMP with the appropriate name changes.
configs/: All defconfig filess that include CONFIG_NET_ICMPv6_SOCKET=y need to select CONFIG_SYSTEM_PING6=y and deselect CONFIG_DISABLE_POLL.
Update NSH documention to show that ping6 is now a built in command.
net/icmpv6: Add icmpv6_sendto.c and icmpv6_recvfrom.c. Initial versions are just clones from icmp/ with appropriate name changes.
net/icmpv6: Clone some ICMP socket logic as the beginning of support for ICMPv6 socket support.
Rename CONFIG_NET_ICMPv6_PING to CONFIG_NET_ICMPv6_SOCKET. Move prototype for icmpv6_ping from include/nuttx/net/icmpv6 to net/icmpv6/icmpv6.h
STM32L1, STM32L4 RTC: add periodic interrupts, update L1 RTC implementation
* STM32L4 RTC: add support experimental CONFIG_RTC_PERIODIC
* STM32 RTC: separate STM32L1 RTC into a separate file
STM32L1 RTC is very close to F4 or L4 versions, with two alarms
and periodic wakeup support so backported L4 peripheral to L1.
* RTC: add periodic alarms to upper and lower halves
Approved-by: Gregory Nutt <gnutt@nuttx.org>
The same interrupt handler is entered with the device structure parameter in all situations,
multiple or single PCA. One should still be careful if multiple PCA devices share the same IRQ.
Stm32 rtc small patches
* RTC: canceling an alarm marks it as inactive
* STM32L4, STM32F4, STM32F7 RTC: fix reading alarm value that is more than 24h in future
* STM32F0 RTC: fix backup register count in stm32_rtcc.h
All other STM32: SHIFTR_SUBFS_MASK was correct in STM32F0 only
* STM32L1: use correct EXTI line definitions
Approved-by: Gregory Nutt <gnutt@nuttx.org>
This commit adds a driver for this chip. Right now it measures bus voltage and current, and does not use the internal calibrated current reading, nor the available power measurement.
Change all calls to mq_receive() and mq_timedreceive() in the OS to calls to nxmq_receive() and nxmq_timedreceive(), making appropriate changes for differences in return values.
sched/mqueue: Add nxmq_receive() and mxmq_timedreceive() which are functionally equivalent to the standard mq_receive and mq_timedreceive() except that (1) they do not create cancellation points, and (2) the do not modify the application's errno variable.
Change all calls to mq_send() and mq_timedsend() in the OS to calls to nxmq_send() and nxmq_timedsend(), making appropriate changes for differences in return values.
sched/mqueue: Add internal function nxmq_send() and nxmq_timedsend() that are equivalent to mq_send() and mq_timedsend() except that they do not create cancellation points and do to not modify the errno variable.
Replace all calls to sigqueue() in the OS proper with calls to nxsig_queue() to avoid accessing the errno variable.
sched/signal: Add nxsig_queue() which is functionally equivalent to sigqueue() except that it does not modify the errno variable.
Replace all usage kill() in the OS proper with nxsig_kill().
sched/signal: Add nxsig_kill() which is functionally equivalent to kill() except that it does not modify the errno variable.
Squashed commit of the following:
Change all calls to usleep() in the OS proper to calls to nxsig_usleep()
sched/signal: Add a new OS internal function nxsig_usleep() that is functionally equivalent to usleep() but does not cause a cancellaption point and does not modify the errno variable.
sched/signal: Add a new OS internal function nxsig_sleep() that is functionally equivalent to sleep() but does not cause a cancellaption point.
This commit backs out most of commit b4747286b1. That change was added because sem_wait() would sometimes cause cancellation points inappropriated. But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.
In the OS, all calls to sem_wait() changed to nxsem_wait(). nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.
In all OS functions (not libraries), change sem_wait() to nxsem_wait(). This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.
sched/semaphore: Add the function nxsem_wait(). This is a new internal OS interface. It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
sched/semaphore: Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable. Changed all references to sem_post in the OS to nxsem_post().
sched/semaphore: Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable. Changed all references to sem_destroy() in the OS to nxsem_destroy().
libc/semaphore and sched/semaphore: Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable. Changed all references to sem_setprotocol in the OS to nxsem_setprotocol(). sem_getprotocol() was not used in the OS
libc/semaphore: Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable. Changed all references to sem_getvalue in the OS to nxsem_getvalue().
sched/semaphore: Rename all internal private functions from sem_xyz to nxsem_xyz. The sem_ prefix is (will be) reserved only for the application semaphore interfaces.
libc/semaphore: Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable. Changed all references to sem_init in the OS to nxsem_init().
sched/semaphore: Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.
sched/semaphoate: Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
configs/z80sim and xtrs: Serial driver lower halfs ioctl methods should return a negated errno value, not set the errno variable.
drivers/wireless: CC1101 driver not permitted to set errno.
drivers/sensors: LIS331DL driver not permitted to set errno.
drivers/lcd: ILI9341 initialize method not permitted to set errno,
drivers/serial: 16550 UART driver IOCTL method must not set errno; it must return a negated errno value.
drivers/usbdev/cdcacm.c: Change design for queuing RX packets that cannot be processed. Previous design had a logic problem that could cause data loss.
drivers/usbdev/cdcacm: Fixes one of two know design issues.
drivers/usbdev/cdcacm: First attempt to plug data leak in input flow control design. Still missing a few things.
configs/stm3210e-eval: Bring in new stm32_appinit.c, add board_initialize(), add support for FB character driver.
configs/stm3210e-eval: Rename stm32_appinit.c to stm32_bringup.c so that the start up logic is compatible with other, new boards.
drivers/video: fb driver now clears framebuffer initially. Eliminates (or minimizes) initial garbage on the display.
configs/open1788: Initialization now follows the pattern of other boards. Add initialization of fb driver.
configs/open1788: Add a configuration for testing the framebuffer driver.
drivers/xbee: Fixes a few warnings
* drivers/xbee: Fixes a few warnings
* configs/clicker2-stm32: Updates sections about i8sak usage in the README
Approved-by: Gregory Nutt <gnutt@nuttx.org>
drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface
* drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev
* configs/same70-xplained: Starts adding support for XBee radio
* drivers/wireless/ieee802154/xbee: More structuring of XBee driver
* drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2
* drivers/wireless/ieee802154/xbee: More XBee MAC code
* configs/clicker2-stm32: More work to add XBee radio support
* drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors
* configs/clicker2-stm32: Adjustments to XBee click module support
* drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields
* drivers/xbee: XBee network device now passes MAC events via IOCTL
* drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic
* configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic
* drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV
* drivers/xbee: Supports MAC RESET.request primitive
* drivers/xbee: Exposes generic AT query to the rest of driver
* drivers/xbee: Sets local values when writing setting change to Xbee device
* drivers/xbee: Finish association logic
* drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame
* drivers/xbee: Finishes transmit/receive logic
* drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c
* drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Merged in merlin17/nuttx/mac802154-sock (pull request #479)
wireless/ieee802154: Adds support for receiving MAC events via IOCTL through socket interface. Other small fixes and cleanup
* ioctl: Cleans up MAC802154IOC values
* wireless/ieee802154: Cleans up MAC802154IOC_NOTIFY_REGISTER logic in character driver
* wireless/ieee802154/mac802154_netdev: Adds support for MAC event notification via IOCTL
* wireless/ieee802154/mac802154: Changes reset logic. No longer reset extended address.
* wireless/ieee802154: Cleans up MAC802154IOC logic
Moves MAC802154IOC from ieee802154_ioctl.h and renames ieee802154_ioctl.h to ieee802154_device.h since it only contains types relevant to the MAC char device now.
* wireless/ieee802154/mac802154_device: Cleans up IOCTL logic for recent changes.
* drivers/wireless/ieee802154/mrf24j40: Adds missing break in case statement
* wireless/ieee802154/mac802154_netdev: Starts adding support for passing MAC events via IOCTL
* wireless/ieee802154/mac802154: Fixes issue with receiver enable logic
* wireless/ieee802154/mac802154: Fixes issue where extended address is cleared and not rewritten after radio reset
* configs/clicker2-stm32/mrf24j40-mac: Enables RAMLOG and wireless driver logging
* wireless/ieee802154/mac802154: Fixes poll logic meant to automatically choose address mode based on short address range.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
driver on STM32F4Discovery rev. C boards and attach the associated interrupt callback.
Added the argument parameter (FAR void *arg) to the interrupt handler provided by the LIS3DSH
driver to fit the definition for ISRs in xcpt_t.
Changed the check for working queue availability in lis3dsh interrupt handler to use work_available()
and not crash in case of an overrun.
drivers/video/fb.c: Framebuffer driver is code complete but as of yet untested.
drivers/video/fb.c: Add framebuffer character device. This is basically only the framework for the driver; a lot of logic is still missing.
commit 2a3ab1652a2c95bcfc8be8380fc7cbdcb6472938
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Aug 19 08:44:31 2017 -0600
PF_IEEE802154: Finish some missing bind() logic. Add configs/sim configuration for testing.
commit 59be4b846a6e3bfe82087a888e3fdac9c3c414e5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 19:30:04 2017 -0600
PF_IEEE802154: More renaming to decouple 6LoPAN from radios in general.
commit 69fabb1aea76e54381bdc13de28a3f1441fb42f4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 19:21:11 2017 -0600
PF_IEEE802154: Missed a few renamings.
commit ff0af1bb25567720934cc1c2a721ccd92cc35f89
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 17:46:58 2017 -0600
PF_IEEE802154: A few bugfixes
commit 01c7c84afd00cf907d280d30cfaf0fb2cf90e02e
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 17:01:31 2017 -0600
PF_IEEE802154: A few bugfixes
commit dcef4056d1c1488c93151135f3b7106977faa903
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 16:31:05 2017 -0600
PF_IEEE802154: Bring in framework for sendto/recvfrom. Currently just a crude port of functions from net/pkt and do not provide the implemenation needed.
commit 68c5b7b6dd3ab7eb2d0c19890abb38e6561b140e
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 15:18:31 2017 -0600
Trivial fix to typo in comment
commit fd0af534c089569ccdbd59f13b85453de0a653ad
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 15:07:20 2017 -0600
PF_IEEE802154: Add device lookup logic; Rename some things that used to be used only by 6LoWPAN but now must be shared with PF_IEEE802154 and need more generic naming.
commit 4fc80a1659f1c699b050775cefc7f6b631b46114
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 13:49:54 2017 -0600
PF_IEEE802154: Add driver poll logic.
commit d83f71992df8764faa93f9425f1a7602a758f730
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 13:28:59 2017 -0600
PF_IEEE802154: Add frame input function.
commit 77561b8c4d5d7be1f8d8eb62cf1a07229afe2048
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 12:46:29 2017 -0600
PF_IEEE802154: Socket type should be SOCK_DGRAM. Hook in socket interface.
commit c0f90350282e9905d7f26a1b30f04cc6d6794648
Merge: 8b518abfd0 169c55e546
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 09:36:32 2017 -0600
Merge remote-tracking branch 'origin/master' into pf_ieee802154
commit 8b518abfd07d492f5148f2c5fdf65604de9822da
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 09:35:39 2017 -0600
PF_IEEE802154: Add initialization and connection management logic.
commit 98b62620b3cb420041d8ad14204f9410a8aace8c
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 07:52:51 2017 -0600
PF_IEEE802154: Add basic build support and socket interface framework.
commit f97da3a546f9d6e1b858cfc45538a06b62396034
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 19:09:46 2017 -0600
Network: Condition out some types that depend on definitions that are only available with 6LoWPAN is enabled.
commit 312e9dc1195527100e12bf6be8b629f5b29be1f6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 18:57:23 2017 -0600
6LoWPAN: Fix case where source and destination IP address were backward. Fix some compile issues when star topology support is enabled.
commit 3b0e71c5807194fbb006d0560bb2c98133055ba3
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 16:01:48 2017 -0600
6LoWPAN PktRadio: Finishes up all logic; Lots of misc changes from build testing.
commit cc118f8cb335e1c48354fd7112e20be57de50b68
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 12:41:18 2017 -0600
6LoWPAN: Remove explicate type struct ieee802154_frame_meta_s from derive interface methods. Replace with a opaque void * type so that other radio meta data structures may use the interfaces. Add a new radion interface to get properties of the radio. Spirit: Finish packet I/O interface with the network.
commit 1aa0a63e8341ca5f9f88c294f96d1740459146d4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 07:57:15 2017 -0600
6LoWPAN: Replace metadata input parameter type from struct ieee802154_data_ind_s to void*. This permits radios with different MAC metadata to interact with 6LoWPAN. Includes many changes to handle variable length radio addresses. No longer just short and exteneded; any length.
commit 46266ace61ae6246123873935436d864c7de31e0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 17:50:42 2017 -0600
Spirit: Fix typos in SPI debug code.
commit 27c6b235f6a2d3b2f08da4920b224a40e9991f59
Merge: 7029dffd02 7f53e08917
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 13:43:02 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 7029dffd02156bcbfa84262671c2ca766a117191
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 12:02:13 2017 -0600
6LoWPAN PktRadio: Add missing MetaData-related prototypes and initialization logic. Perform a major renaming to make room in the 6LoWPAN name space for packet radios.
commit e2012f7c1df14155c0bfd45d7f1cb3f71b259f48
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 10:16:23 2017 -0600
6LoWPAN PktRadio: Some initial changes to support raw packet radios without IEEE 802.15.4 with 6LoWPAN.
commit c6dbf9178539b7da75e492ffd1d1f93c9c326299
Merge: da782d6cdf 5889ce65f5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 07:30:08 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit da782d6cdff5980d71aaa2da5f9c28ab3438d085
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 07:26:48 2017 -0600
Spirit: Completes port of the spirit radio library to NuttX.
commit 63f3595c47dca13952d28b518c7f0a8d6ae9037a
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 17:42:51 2017 -0600
Spirit: Bring in a couple ore more radio interface functions.
commit 692a27da396b7683749790923d8fa085091764f1
Merge: 27c0a6ec08 38f79543dc
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 15:49:37 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 27c0a6ec0813187f125922c81189a70cf04d83d4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 15:47:27 2017 -0600
Spirit: Bring in a couple ore more radio interface functions.
commit 96657af2831487724723a60084831619257fd953
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 14:20:14 2017 -0600
Spirit: Bring in more radio interface functions.
commit 640d55399b54a019be68825668fca1446abd082f
Merge: 3fcf84a9a2 47791442a0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 12:01:43 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 3fcf84a9a2673e1e1466ce5b114d7b73c257e515
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 12:00:31 2017 -0600
Spirit: Brings in the last of the PktCommon interfaces.
commit d26ebd901ba4ba84910e99b4e728b98c30fa4c0b
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:54:52 2017 -0600
Spirit: Add a few more PktCommon interfaces.
commit b5cb8041d50233a4abb8fb4d1dcef5428ae2c2b2
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:33:31 2017 -0600
libc/termios: Remember block comments before empty file sections.
commit 0fcab2c1c8c74442d40bd5e8c6af50a34f8a5821
Author: Sebastien Lorquet <sebastien@lorquet.fr>
Date: Fri Jul 28 09:31:00 2017 -0600
tcdrain implementation based on a new term ioctl
commit 797d4adf7d41068c671f0217d369b797b269de1a
Author: Stefan Kolb <Stefan.Kolb@avat.de>
Date: Fri Jul 28 09:19:04 2017 -0600
We discovered a problem with the samv7 mcan driver which results, under some circumstances, in a very high CPU load.
The problem occurs, and is easily reproducible, if the device is connected to a CAN network with a wrongly configured CAN speed (baud rate). In our tests we set the CAN speed of the device to 1000000 and the speed of the other CAN nodes to 500000. The device is restarted and sends a CANopen “bootup message” to the CAN network. This results in huge amount of errors messages on the CAN bus, probably because of the CAN feature for acknowledging error messages. The error messages can’t be read by the device because of the misconfigured CAN speed, instead the CAN chip reports lots of errors, which are reported to the application which uses the CAN driver (CONFIG_CAN_ERRORS is enabled).
The CAN errors are reported from the CAN chip via interrupts and thus the interrupt load is very high in this scenario. To fix the problem the driver now disables each RX error interrupt after it is occurred. The RX error interrupts are turned back on if at least one CAN message is received successfully.
commit e298f48e96d9e34017dcab8e4d87032862ae9322
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:06:26 2017 -0600
Spirit: Bring in PktStack interfaces.
commit 4a0f00a7058312dcf6ac392689b9f69112f613ec
Merge: 855cf97130 b458934ac4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 18:05:02 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 855cf9713052a851a1daeb3842db2edd6ff6f658
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 18:03:56 2017 -0600
Spirit Network Driver: Add some hooks that will eventually support address filtering.
commit 3b3fb24ea86cf8233b034871d5c550f47ab852e6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 17:13:21 2017 -0600
Spirit: Add a PktStack header file.
commit 705e8fff6a21264ab751fb34c107cb109430ac89
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 15:00:03 2017 -0600
Spirit: Bring in last of timer interfaces.
commit f8984b2f82e165f5bba132d6b099222d1beb1fbd
Merge: cb79778a30 f287cc25d6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 11:57:01 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit cb79778a3044ae97a1cc615dfa24099144f04bd0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 11:46:31 2017 -0600
Spirit: Bring in last of QI interfaces.
commit 0245b330a33aa73531b82ae261b1312be9922e0f
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 10:14:34 2017 -0600
Spirit: Add general interfaces.
commit 121845a8f229ec2c88e5721da5512135f6624ee5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 09:41:23 2017 -0600
Spirit: Bring in last of GPIO interfaces.
commit 279bfcc92bcd0cfa48c0ed7862fa2b75fbee99b8
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 17:09:19 2017 -0600
Spirit: Add some missing configuration options: Add register -level debug options.
commit 4be89324a5908e35afc70373c279f4d05f62b48f
Merge: 66e87f9bb3 598386ef90
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 15:36:20 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 66e87f9bb3ef75fddf25400bc08475c5e6ad4c30
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 15:19:56 2017 -0600
Spirit: Brings in last of PktBasic logic.
commit 8b4c89d6a103003fa04363e2c2ae7b9ee390bf49
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 11:55:50 2017 -0600
Spirit: Bring in AES and MBUS logic.
commit d00022d39ab0ce839de29386949481e5c24feff3
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 09:22:03 2017 -0600
Spirit: Bring in remainder of calibration interfaces.
commit 40b4b2f902e04293f8940551a97a9a24a48988dd
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 08:44:32 2017 -0600
Spirit: Bring in DirectRF interfaces.
commit 7c109608e1a2989f3edbc2fd939a2d225fff382a
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 07:46:19 2017 -0600
Spirit: Add CSMA support.
commit 0f88896595d162c4ac6138e7b1af2fc35c865b3d
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 18:57:43 2017 -0600
Spirit: Add some initial TX logic to network driver.
commit 4dc7058dfcdcf40980578680b7e1a4206dea4ea2
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 17:02:11 2017 -0600
Spirit: Completes ports of spirit_management.* files
commit c904eef51d929e041b87d0c8aff6fa3c2f895341
Merge: 91e985a877 c9ff8cbab9
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 15:15:04 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 91e985a87729017a66d19276c4d47681064f95ea
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 15:13:54 2017 -0600
Spirit: Add a few more functions that will soon be needed for packet transmission.
commit b5981d29983907c2194fbc26af4b72ad532bee78
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 13:30:07 2017 -0600
Spirit: Finish off some initialization issues; Started some interrupt handling logic.
commit c21073e0bc2870b3d9ba40bdfdfd5151ce4f5890
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 09:35:52 2017 -0600
Spirit: Completes very basic radio initialization for network driver
commit 1b544334361c54f46bcf0ba313c125932e8dafc6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 07:58:30 2017 -0600
Spirit: Add more radio initialization logic... getting closer.
commit 45d1047db60843c57d394ec910c63e7c127671e0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 19:15:33 2017 -0600
Spirit: add some CSMA initialization logic
commit bcf55c71336d48947fe19bb09a799169852301c2
Merge: 89e9d426e9 2fc0fbcf7e
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 16:47:11 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 89e9d426e91c056e659fccf5e5c4392618f8f777
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 16:44:19 2017 -0600
Update some comments
commit 9c5d8a5833350006ed389e898b11c8c8a20e5f4f
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 16:15:54 2017 -0600
Spirit: Rename drivers/wireless/spirit/src to lib. Move Spirit network driver out of IEEE802.15.4 into drivers/wireless/spirit/drivers
commit cabc0ec9e6eb558dcb715ab17264383aa0105e7a
Merge: 87b616414a 6bd744c4b3
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 15:38:40 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 87b616414a79c01a71acea78f8258e05325c1996
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 15:37:27 2017 -0600
Spirit radio driver is mutating into a standalone network driver.
commit 507798233868a661ae8adad3e3aa117075a7a146
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 13:32:08 2017 -0600
Spirit: More radio initialization logic
commit 33af25704ce9ca83d576300d153cfe31cc6d2576
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 12:19:14 2017 -0600
Spirit: Beginning of radio initialization logic
commit 97b20014c016e55952a8f9d8f4ae29e2cc555b23
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 09:42:06 2017 -0600
Spirit: More initialization logic.
commit 295d8e27824c0417fccea2344b30bb5c93ffbabe
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 23 15:39:53 2017 -0600
Spirit: Add header file containing enumeration of commands.
commit 8a2d9dd8eb9cc70cbcdd1b913fc9022b9c9ec8da
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 23 11:33:50 2017 -0600
Spirit: Add GPIO initialization logic
commit 8b6d80c44f92024c45a6ba63ba1af3fdafe94dc3
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 23 10:07:25 2017 -0600
Spirit: Add interrupt control logic.
commit 423f846fe5c914f92a4bfea4d9d1fa33de1c77a5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 19:06:52 2017 -0600
Spirit: Yet a little more radio initialization logic.
commit 5895b979823e51ddde5ad52e6de66a8ad662e883
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 15:36:05 2017 -0600
Spirit: A little more radio initialization logic.
commit 86311ab30aad386203c181c792847dd1d37f9a02
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 13:02:32 2017 -0600
Spirit: A miniscule amount of radio initialization logic.
commit ad55e89d5ee12ea1eeea95fcd38ff3da0db4416a
Merge: 90a7666655 f4e46b0da7
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 10:56:30 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 90a766665534b05da0157dbc383cb06a98c86a79
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 10:52:52 2017 -0600
Spirit1: A few fixes for a clean build of initial configuration (not much there yet)
commit bbbf04c223230a52a7705a2161128265cfbaa480
Merge: 623d54a7f7 2319ea53a9
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 09:53:57 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 623d54a7f719e9032099f88f38203efee4b80722
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 09:43:52 2017 -0600
b-l475e-iot01a: Add a configuration for testing sprit radio.
commit d309d73d9f4665f9d870eb03531f450043d9389d
Merge: 52c3ddfae6 d88dc9b2e5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 09:02:06 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 52c3ddfae6802e111c2b5cf1207baf21a61dd00b
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 08:33:04 2017 -0600
Spirit: Add register definition header file.
commit 8d842ab5e8f9ca653b42f9ee88dc279f06b4fa98
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 21 17:27:03 2017 -0600
b-l475e-iot01a: Add initial, unverified support for the SPSRGF/Spirit1 module.
commit 73d902a1048616fb9c2dd2147cabcd8ee78e19ac
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 21 15:49:43 2017 -0600
Spirit: Fixes to get skeleton IEEE 802.15.4 driver build.
commit ebc5a8387bb94f0cc3827533795f3e4a33207e67
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 21 15:16:29 2017 -0600
Spirit1: Add framework for IEEE 802.15.4 driver. Does not yet build.
commit 52e195a7ae14ddb18bdd56258f4877381d2501ca
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 21 14:02:42 2017 -0600
Spirit: A little more SPI logic.
commit 90048d0c5b8a5af4d81a15d99535c84ed38d8ae9
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 21 11:19:06 2017 -0600
Spirit: Build directories setup. Some initial files added, mostly just to verify build.
commit 8273a381ac1f6bb081b292b5e73226185e9e634c
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 21 08:34:04 2017 -0600
USB composite: Remove references to CDC/ACM and USB MSC from composite logic. They are no longer coupled.
commit 69fcf3e849
Author: Alan Carvalho de Assis <acassis@gmail.com>
Date: Sun Jul 16 08:39:33 2017 -0600
Fix spark/stm32_composite.c: board_composite_connect cannot be static
commit 28eb253401
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 16 08:36:01 2017 -0600
Composite: Final review for coding style before merge
commit e6af1b9994
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 16 07:41:38 2017 -0600
Composite: Simplify some intiialization of data structures.
commit 771c367411
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 16 07:15:08 2017 -0600
Cosmetic changes to alignment.
commit 5d67ddda4e
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 16 07:00:48 2017 -0600
USBMSC: Add missing logic to saved device description.
commit 0729151d29
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 15 17:11:41 2017 -0600
Trivial, costmetic
commit 74b916ff84
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 15 14:50:29 2017 -0600
Composite: Private functions need to be marked static. Move static functions out of 'Public Functions' to 'Private Functions' where they belong. Disable composite configuration 1 in all STM32 F1 configurations.
commit cfaa4ece13
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 15 13:20:34 2017 -0600
Add some comments.
commit 8143563be6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 15 12:33:10 2017 -0600
Spark: Need to condition out MSC logic in composite setup if there is no MSC in the composite.
commit 69d3a91ef1
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 15 11:03:33 2017 -0600
Composite: Remove all dependencies on CONFIG_SYSTEM_COMPOSITE_* configuration settings. Nothing in the OS can depend on external application settings.
commit 55a4388bbd
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 15 09:59:31 2017 -0600
All composite configurations now also support a dual CDC/ACM configuration.
commit 428f2147af
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 15 09:24:32 2017 -0600
Composite: Move board_msc* interfaces from apps/system/composite to the board specific OS logic where they belong.
commit f1cc168a5c
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 15 08:56:33 2017 -0600
Refresh all composite configurations.
commit 246afcaa10
Merge: 919877191d02c6672868
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 15 08:22:26 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit 919877191d
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 15 08:20:02 2017 -0600
Composite setup: Remove useless board_cdc* wrapper.
commit 82129cf8c6
Merge: f2cb8b252a6537e4ea20
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 14 16:23:57 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit f2cb8b252a
Author: Alan Carvalho de Assis <acassis@gmail.com>
Date: Fri Jul 14 10:19:35 2017 -0600
Composite: Fix for another cloned typo.
commit 676cfd526a
Author: Alan Carvalho de Assis <acassis@gmail.com>
Date: Fri Jul 14 09:11:37 2017 -0600
Composite: Fix some typos
commit 1ea0368c18
Author: Alan Carvalho de Assis <acassis@gmail.com>
Date: Fri Jul 14 09:10:18 2017 -0600
Composite: ./stm3210e-eval/src/stm32_composite.c
commit e485caced9
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 14 09:08:17 2017 -0600
Composite: I don't think the original code should have forced minor=0.
commit 6443c29621
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 14 07:15:38 2017 -0600
Composite: Flesh out support for all of other configurations that support composite.
commit 23cbc28b05
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 14 06:59:45 2017 -0600
Detangle use of board_xyzclassobject() and board_xyzuninitialize()
commit 1674cb8c8e
Merge: 6bc881a1925033a6def7
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 13 13:57:40 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit 6bc881a192
Merge: fe3af4941d85b8d16d8c
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 11 12:24:07 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit fe3af4941d
Merge: 0f9ad16e181bc0eea143
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 10 11:07:36 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit 0f9ad16e18
Merge: a4cd90d4efaa2e9c15a5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 7 20:26:53 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit a4cd90d4ef
Merge: 8a4be7175e31f832d8c5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 5 11:12:52 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit 8a4be7175e
Merge: 18a32ed2caae1771454a
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jun 30 16:14:04 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit 18a32ed2ca
Merge: aaa81ce4976d8df90b79
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jun 29 10:18:16 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit aaa81ce497
Merge: 4eb548226b8cb4636bb1
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jun 26 11:56:11 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit 4eb548226b
Merge: 2327f5a1b4dc8eec0b61
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jun 19 17:27:00 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit 2327f5a1b4
Merge: 49cd279fc699bf0b522b
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jun 16 17:30:03 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit 49cd279fc6
Merge: bb6a13f30a46f86982ee
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jun 14 09:17:49 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit bb6a13f30a
Merge: 918480047aac93d4bda9
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jun 5 17:40:06 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit 918480047a
Merge: e4d262436c4526cd665e
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jun 3 08:52:31 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit e4d262436c
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jun 2 07:19:27 2017 -0600
SAMV71-Xult Composite: Now can switch between two different composite configurations dynamically.
commit 815257743d
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jun 2 07:11:57 2017 -0600
usbdev composite and SAMV7-Xult: Move board-specific USB composite configuration out of boardctl.c and into board-specific logic where it belongs. Add a configuration option to the boardctl() calls to support multiple composite device configurations dynamically.
commit ac13619dc5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jun 1 17:03:58 2017 -0600
Cosmetic
commit 9dd41bdd2f
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jun 1 17:02:43 2017 -0600
Composite: More compile-related fixes
commit fc1438c95d
Merge: 049ccbfcbeff2b54a5e0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jun 1 16:35:41 2017 -0600
Merge remote-tracking branch 'origin/master' into composite
commit 049ccbfcbe
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jun 1 16:35:16 2017 -0600
Composite: Add some structure definitions missed in first application of the patch.
commit ef33329e3a
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jun 1 16:14:46 2017 -0600
Add a warning
commit 89f77cd91a
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jun 1 16:11:27 2017 -0600
Fix some incomplete name changes
commit 0bb7af549a
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jun 1 15:09:50 2017 -0600
It is unnecessary to pack a structure that consists only of uint8_t data fields.
commit bd9b548914
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jun 1 15:05:41 2017 -0600
Remove COMPILE_TIME_ASSERTION
commit 7e6f481581
Author: Frank Benkert <Frank.Benkert@avat.de>
Date: Thu Jun 1 14:58:04 2017 -0600
Part II of the same big commit
commit dcc9b07715
Author: Frank Benkert <Frank.Benkert@avat.de>
Date: Thu Jun 1 14:08:22 2017 -0600
[[This is part 1 or several commits]]
We developed a huge Changeset over a year ago to make USB Composite configuration dynamical and be able to instanciate the CDCACM multiple times inside this device. We use this feature to switch between one in normal and up to three CDCACMs in maintenance boot.
The control path starts in “boardctl.c” where the configuration for the device is constructed. There are still a few issues which I’ll ask you to have a look at before this beast can be merged.
1. To be able to construct the data dynamically I have changed some USB-Structs to be packed. Maybe there are additional structs to change (just for completeness – not for current functionality).
2. I’ve added the Macro “COMPILE_TIME_ASSERTION” two times (in usbmsc_desc.c and in cdcacm_desc.c) to stay private. Maybe you’ll find a better place. It’s used to check the size of the structs against the assumptions.
3. I’ve changed the interface for some USB-Functions to receive also the dynamic configuration. Maybe this can be done more elegant.
4. The original NuttX (without the patch) seems to have problems with a Composite device holding a CDCACM and an MSC. The “USB SET CONFIGURATION” request does not to work at all. This makes the test fail under Windows and under Linux. Applying this patch doesn’t change anything – because it only changes the configuration – not the behavior. Maybe you’ll have a look at this problem before applying the patch.
