Alan Carvalho de Assis
7133f89cc2
tools/Makefile.unix, .win, and all defconfig files: Modify tools/Makefiles to add warning on defconfig files
2019-03-03 08:31:03 -06:00
Gregory Nutt
47d87fd857
configs/: Refresh ARM and Xtensa configurations.
2018-08-19 17:48:13 -06:00
Gregory Nutt
bbad69ab61
Change all occurrences of CONFIG_EXAMPLES_NSH* to CONFIG_SYSTEM_NSH* to match changes in the apps/ directory.
2018-08-18 09:14:59 -06:00
Gregory Nutt
301bf1ee77
This commit eliminates the BOARDIOC_TSCTEST_SETUP command.
...
Squashed commit of the following:
configs: Each board now initializes the touchscreen controller as a normal part of its board bring-up. board_tsc_setup() is gone; the touchscreen controller is now treated like any other on-board device.
Remove all support for BOARDIOC_TSCTEST_SETUP
Move prototype for board_tsc_setup() from include/nuttx/board.h to individual board header files.
2018-01-17 09:33:28 -06:00
Gregory Nutt
fdf4e40b6a
configs/lpcxpresso-lpc54628: Correct SRAM base address in all configurations.
2018-01-13 08:34:58 -06:00
Gregory Nutt
5d1a91fd8e
configs/lpcxpresso-lpc5428/fb: Should disable pixel depths that are not being used.
2018-01-04 16:40:31 -06:00
Gregory Nutt
36cc4fc066
Fix saome warnings found in build testing.
2018-01-04 13:33:42 -06:00
Gregory Nutt
f5c5f89592
arch/arm/src/lpc54xx: Add (incomplete) Ethernet register definition file. Add framework for an Ethernet driver. Initial commit is just the drivers/skeleton.c with naming updated for the LPC54.
2017-12-26 12:55:58 -06:00
Gregory Nutt
6f897d32a2
confifgs/lpcxpresso-lpc54628: Calibrate delay loop.
2017-12-19 08:21:41 -06:00
Gregory Nutt
5a0963f0b0
drivers/ft5x06.x and related: Minor cleanup after completing the FT5x06 driver verification.
2017-12-19 07:14:02 -06:00
Gregory Nutt
ead23dca30
configs/lpcxpresso-lpc54628: Add an NxWM configuration. Not yet functional.
2017-12-18 13:33:37 -06:00
Gregory Nutt
4a5e18a6db
drivers/ft5x06.c: Add additional configuration options: Optimize if multi-touch capability is not used. Add options to swap X/Y and thresholding to reduce the rate of false alarm reports (with no motion).
2017-12-18 10:31:49 -06:00
Gregory Nutt
23dfc0bf06
drivers/ft5x06: Add a polled mode of operation for the FT5x06 in attempt to work around the fact that the LPCXpresso-LPC54628 chose a non-interrupt pin for the FT5x06 interrupt. Driver is still not yet functional.
2017-12-18 08:58:07 -06:00
Gregory Nutt
87252297d6
arch/arm/src/: Fix a error in last commit that was cloned in three places.
2017-12-17 14:38:20 -06:00
Gregory Nutt
5a12079e53
arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.
2017-12-16 13:00:06 -06:00
Gregory Nutt
c53d88c75c
Squashed commit of the following:
...
arch/arm/src/lpc54xx: LCD.. Fix some miconceptions about how the video address lines are used.
arch/arm/src/lpc54xx: Fix some LCD BPP and BRG vs RGB settings.
2017-12-14 10:45:53 -06:00
Gregory Nutt
f215660296
configs/lpcxpresso-lpc54628: Add the fb configuration testing the LCD. arch/arm/src/lpc54xx: Various fixes needed to get the fb configuration to build errorfree. The configuration is not functional as of this writing.
2017-12-13 09:18:16 -06:00
