Commit Graph

74 Commits

Author SHA1 Message Date
Gregory Nutt
9aac1dd44d configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files. 2017-04-26 10:12:13 -06:00
Gregory Nutt
c214aab09f Update README 2016-08-03 10:07:20 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
9ec104834a Remove CONFIG_USARTn_ISUART 2016-05-25 11:21:48 -06:00
Gregory Nutt
3e0efd7279 Fix all URLs to the NuttX repository 2016-04-06 17:56:40 -06:00
Gregory Nutt
de50bc82a7 Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law 2016-01-23 18:21:36 -06:00
Gregory Nutt
e46cd30c14 Change use of mknulldeps.sh to mkwindeps.sh 2016-01-09 14:13:44 -06:00
Gregory Nutt
9e99cfa4e0 Correct many bitbucket.org URLs 2015-06-28 09:14:52 -06:00
Gregory Nutt
7214e52fb2 Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
46bd0bc307 This cleans up most of the remaining SourceForge references 2015-06-26 18:13:20 -06:00
Gregory Nutt
49415e7cc8 Two r's and only two r's in the word interrupt 2015-04-23 14:04:43 -06:00
Gregory Nutt
51950d7850 Undefine IRQPRIO in all configurations it should not be set 2014-04-16 08:29:39 -06:00
Gregory Nutt
0cefef9cb5 Documentatin updated; fix errors in some comments 2014-03-28 09:52:07 -06:00
Gregory Nutt
2ba8224cdc SAM3/4: Rename CONFIG_GPIO*_IRQ to CONFIG_SAM34_GPIO*_IRQ in all board-related files 2014-03-23 15:48:10 -06:00
Gregory Nutt
4f657b0577 SAM3/4: Integrate the SPI DMA interface with the existing code. Does not yet work. 2014-03-13 15:54:09 -06:00
Gregory Nutt
58eed436e9 Removed almost all ostest configurations 2014-02-28 19:19:11 -06:00
Gregory Nutt
d45a8ce4bc SAM4E: Update SAM3/4 TC and DMAC register definition header files 2014-02-25 10:56:23 -06:00
Gregory Nutt
01b3dd6dc0 SAMA5D3x-EK: Add NxWM configuration for the SAMA5D3x-EK boards 2013-10-13 18:49:32 -06:00
Gregory Nutt
f19af5572d Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
cddedcde9b SAMA5: Fix HSMCI race condition. Now memory card interface is functional with DMA 2013-08-10 18:01:23 -06:00
Gregory Nutt
efded598fd Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_ 2013-07-26 10:09:17 -06:00
Gregory Nutt
381c8c2509 Basic framework to support the AT91SAMA5D3 family and the SAMA5D3x-EK board(s) in particular 2013-07-19 15:23:03 -06:00
Gregory Nutt
f72b347765 NSH cmp command by Andrew Twidgell 2013-07-18 08:24:29 -06:00
Gregory Nutt
9686b4a6c5 SAM configurations: don't use 3 memory regions unless SMC is enabled 2013-07-12 14:50:22 -06:00
Gregory Nutt
c8a4f69a69 Several fixes to get a clean compile of the Arduino touch screen 2013-07-02 13:52:09 -06:00
Gregory Nutt
b26132f8be Update SAM3u-EK touchscreen status 2013-06-30 12:05:09 -06:00
Gregory Nutt
6be88e0b54 Minor SAM3U-EK NxWM build updates, documentation, configurations 2013-06-30 11:20:24 -06:00
Gregory Nutt
815da5e8bb Changes to get a clean compile of configs/sam3u-ek/nxwm 2013-06-29 09:39:01 -06:00
Gregory Nutt
b0bc01aca7 SAM3U-EK touchscreen is now functional; created an NxWM configuration to test it further 2013-06-28 17:07:58 -06:00
Gregory Nutt
7387a6feef Flesh out the Arduino Due board configuratino and integrate it with the build and configuration system 2013-06-27 14:24:27 -06:00
Gregory Nutt
288adb2f5a Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port 2013-06-26 18:46:44 -06:00
Gregory Nutt
35840871b4 Fix test of NULL pointer in the SAM3/4 SPI driver 2013-06-18 12:16:52 -06:00
Gregory Nutt
7a9d4058f5 MMC/SD driver needs to manage SPI mode and data width as well 2013-06-17 12:31:24 -06:00
Gregory Nutt
a168132901 SAM3U-EK board now runs at 96MHz 2013-06-17 08:41:52 -06:00
Gregory Nutt
5ed3283b02 SAM3U-EK: Correct polarity of the PENIRQ signal 2013-06-16 14:31:18 -06:00
Gregory Nutt
28a7c22757 Re-architected SAM3/4 SPI interface; Change BUSY bit handling in the ADS7843E driver 2013-06-16 10:09:21 -06:00
Gregory Nutt
30ecf0ca43 Fixes for SAM4S and 4L due to recent changes to SAM3S; Updated README files 2013-06-14 08:54:24 -06:00
Gregory Nutt
61ac624755 SAM3/4: Some minor design improvements to the SAM3/4 serial driver 2013-06-13 15:16:52 -06:00
Gregory Nutt
516c3bb7c2 Fix error in AT91SAM SPI driver introduced in recent comment. Varioius improvements to README files and debug output 2013-06-13 13:38:31 -06:00
Gregory Nutt
b40def3027 Add support for a generic windows-based EABI toolchain; Add NX configuration to force default NXTK border colors 2013-06-13 11:04:18 -06:00
Gregory Nutt
9ab85d01ef Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup 2013-06-12 17:32:00 -06:00
Gregory Nutt
5e192c767b SAM4S: GPIO, chip characteristics, peripheral Kconfig 2013-06-11 12:28:31 -06:00
Gregory Nutt
ff5688486f SAM4S: Add memory map and interrupt logic 2013-06-10 16:18:47 -06:00
Gregory Nutt
7fbbf81f71 Rename sam3u/ architecture directories to sam34/ to include the SAM4L 2013-06-02 13:57:22 -06:00
Gregory Nutt
ca8d55d856 Eliminated sam3u_internal.h. Use separate header files instead. More renaming from sam3u_ to sam_ to make room in the namespce for the sam4l_ 2013-06-02 13:04:40 -06:00
Gregory Nutt
ea73fceb34 Move SAM3U header files to arch/arm/src/sam3u/chip. Some renaming of SAM3U to SAM to ssupport SAM4. Convert all configs/sam3u-ek configurations to use the kconfig-frontends tool 2013-06-02 10:33:57 -06:00
patacongo
569bd582f6 Fix some errors in stm32_allocateheap.c for STM32 F1 and F3 that crept in recently
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5776 42af7a65-404d-4744-a932-0658087f49c3
2013-03-22 18:26:03 +00:00
patacongo
7586e0b134 A few early fixes in kernel build testing
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5734 42af7a65-404d-4744-a932-0658087f49c3
2013-03-12 16:02:48 +00:00
patacongo
41444f7836 Reorganize some AT91SAM3U files; Add an NSH kernel build configuration to the WaveSahhare Open1788 board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5732 42af7a65-404d-4744-a932-0658087f49c3
2013-03-11 20:26:55 +00:00