Gregory Nutt
6bcace62a8
Update some C++ header files
2017-02-14 07:48:54 -06:00
Gregory Nutt
68053f88e5
Update READMEs and TODO list
2017-02-14 06:18:18 -06:00
Gregory Nutt
0b72903049
Update TODO List
2017-02-13 12:05:33 -06:00
Gregory Nutt
9a3af1a3e0
Update TODO list
2017-02-12 12:10:46 -06:00
Gregory Nutt
62a1f6f110
up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list.
2017-02-07 10:35:04 -06:00
Gregory Nutt
2d9668fbd2
Fix a typo in a comment
2017-01-12 16:24:41 -06:00
Gregory Nutt
4ca27e06a7
Update TODO list
2017-01-12 08:04:27 -06:00
Gregory Nutt
bc595aeec8
Update TODO list and a README file.
2017-01-07 14:00:39 -06:00
Gregory Nutt
07d8474a49
Update TODO list
2017-01-06 15:38:59 -06:00
Gregory Nutt
ecb5096065
Update TODO list
2017-01-06 11:58:49 -06:00
Gregory Nutt
8f76bacc55
Add hyprlinks to a document
2016-12-12 08:18:38 -06:00
Gregory Nutt
baaa5f7cb8
Update TODO list
2016-12-11 07:50:05 -06:00
Gregory Nutt
d648f9c8b4
Add task_testcancel()
2016-12-10 16:34:14 -06:00
Gregory Nutt
1b2135a90a
Add pthread_setcanceltype() and pthread_testcancel() as system calls.
2016-12-10 07:12:11 -06:00
Gregory Nutt
a0f567f4a3
Update TODO, cosmetic changes, spelling -- US English spells it canceled and canceling vs cancelled and cancelling. No idea why.
2016-12-09 18:39:40 -06:00
Gregory Nutt
559a027229
Update TODO list
2016-12-09 17:39:01 -06:00
Gregory Nutt
7fce8022c6
Finishes all cancellation point logic
2016-12-09 16:50:34 -06:00
Gregory Nutt
d20265164e
Update TODO list
2016-12-09 12:13:52 -06:00
Gregory Nutt
a692a4cc46
Update TODO again
2016-12-08 13:34:18 -06:00
Gregory Nutt
2a2926473c
Update TODO list
2016-12-08 12:30:10 -06:00
Gregory Nutt
ab43681f15
Update TODO and some comments.
2016-12-08 10:24:40 -06:00
Gregory Nutt
a1fbc2ad0d
pthreads: Add pthread_cleanup_push() and pthread_cleanup_pop()
2016-12-08 09:27:13 -06:00
Gregory Nutt
bdb8275824
Update TODO list
2016-12-03 12:21:18 -06:00
Gregory Nutt
43459fe75e
DM09x0 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 11:42:15 -06:00
Gregory Nutt
41e35c88bf
eZ80 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 10:43:35 -06:00
Gregory Nutt
bfa1da14e2
LM3S Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 08:32:49 -06:00
Gregory Nutt
1851e9e837
SAMA5D3: Add support for CONFIG_NET_NOINTS to EMACA and GMAC driver.
2016-12-02 16:36:27 -06:00
Gregory Nutt
c0cbea2550
Remove RGMP and RGMP drivers.
2016-12-02 09:49:33 -06:00
Gregory Nutt
cd54c71dc1
ARMv7-A/i.MX6: Modify handling of the SMP cache coherency configuration so that it is identical to the steps from the TRM. Makes no differenct, however.
2016-11-27 10:21:46 -06:00
Gregory Nutt
bbc17abf68
Update some comments
2016-11-23 13:30:51 -06:00
Gregory Nutt
bac7153609
SMP: Add logic to avoid a deadlock condition when CPU1 is hung waiting for g_cpu_irqlock and CPU0 is waitin for g_cpu_paused
2016-11-22 11:34:16 -06:00
Gregory Nutt
cee8d59b58
Update TODO list
2016-11-20 12:26:08 -06:00
Gregory Nutt
01ade4803a
Update README and TODO list
2016-11-20 09:51:54 -06:00
Gregory Nutt
e24f281401
This commit adds a new internal interfaces and fixes a problem with three APIs in the SMP configuration. The new internal interface is sched_cpu_pause(tcb). This function will pause a CPU if the task associated with 'tcb' is running on that CPU. This allows a different CPU to modify that OS data stuctures associated with the CPU. When the other CPU is resumed, those modifications can safely take place.
...
The three fixes are to handle cases in the SMP configuration where one CPU does need to make modifications to TCB and data structures on a task that could be running running on another CPU. Those three cases are task_delete(), task_restart(), and execution of signal handles. In all three cases the solutions is basically the same: (1) Call sched_cpu_pause(tcb) to pause the CPU on which the task is running, (2) perform the necessary operations, then (3) call up_cpu_resume() to restart the paused CPU.
2016-11-20 07:57:18 -06:00
Gregory Nutt
f5b35e0461
Clarify TODO list
2016-11-19 16:58:25 -06:00
Gregory Nutt
82cd27170b
Update TODO list
2016-11-19 16:37:09 -06:00
Gregory Nutt
ac9a11d9ab
Update TODO list
2016-11-19 13:31:14 -06:00
Gregory Nutt
6a7619b6f0
Update TODO list
2016-11-19 13:23:15 -06:00
Gregory Nutt
ecb2d4cbc1
drivers/timer: Remove the TIOC_SETHANDLER IOCTL call. This calls directly from the timer driver into application code. That is non-standard, non-portable, and cannot be supported
2016-11-17 11:52:42 -06:00
Gregory Nutt
9045959aa6
Update TODO and README
2016-11-08 07:45:21 -06:00
Gregory Nutt
860c0f5873
Update TODO list.
2016-11-06 10:15:01 -06:00
Gregory Nutt
796969f6b6
Update TODO. Provide do-nothing stubs for mutex attribute interfaces if features not enabled. pthread_cond includes a signaling semaphore and should call sem_setprotocol.
2016-11-05 11:06:52 -06:00
Gregory Nutt
470c692dbf
Update TODO list
2016-11-02 18:31:22 -06:00
Gregory Nutt
97bf82ee05
Semaphores: Provide macros for sem_setprotobol() and sem_getprotocol() if priority inheritance is not enabled. More SEM_PRIO_* definitions to include/nuttx/semaphore.h
2016-11-02 18:21:46 -06:00
Gregory Nutt
e568b08b04
Update TODO list
2016-10-09 09:36:03 -06:00
Gregory Nutt
ead4b6014e
Trivial typo fix
2016-08-17 14:07:13 -06:00
Gregory Nutt
014b8268cc
Minor stylistic corrections
2016-08-14 10:14:28 -06:00
Gregory Nutt
8ee155da3d
Rename arch/sh to arch/renesas
2016-08-06 13:33:41 -06:00
Gregory Nutt
c214aab09f
Update README
2016-08-03 10:07:20 -06:00
Gregory Nutt
5f9ee79298
I/O Expander: Remove hard-coded PCA9555 fields from ioexpander.h definitons. Add support for an attach() method that may be used when any subset of pin interrupts occur.
...
PCA9555 Driver: Replace the signalling logic with a simple callback using the new definitons of ioexpander.h. This repartitioning of functionality is necessary because (1) the I/O expander driver is the lower-lower part of any driver that uses GPIOs (include the GPIO driver itself) and should not be interacting directly with the much higher level application layer. And (2) in order to be compatible with the GPIO driver (and any arbitrary upper half driver), the PCA9555 should not directly signal, but should call back into the upper half. The upper half driver that interacts directly with the application is the appropriate place to be generating signal.
2016-07-31 11:09:47 -06:00
Gregory Nutt
aa8a52aacd
Update TODO list and NSH documentation
2016-07-20 10:45:21 -06:00
Gregory Nutt
dee77a5dd9
Kinetis Ethernet: Add support for CONFIG_NET_NOINTS
2016-07-12 16:17:35 -06:00
Gregory Nutt
3a594c07f8
Update TODO list
2016-07-03 15:13:32 -06:00
Gregory Nutt
b16fdaf155
Some small improvements to GPIO driver
2016-06-26 11:24:35 -06:00
Gregory Nutt
a39ff55340
Update TODO and README.txt files
2016-06-06 12:58:59 -06:00
Gregory Nutt
dbca089c96
Update TODO list
2016-06-06 06:48:32 -06:00
Gregory Nutt
f65616f872
Replace confusing references to uIP with just 'the network'
2016-05-30 09:16:32 -06:00
Gregory Nutt
ceaad0f339
Upate TODO list
2016-05-28 12:22:35 -06:00
Gregory Nutt
607dd3bec5
Spell check TODO list
2016-05-27 14:44:39 -06:00
Gregory Nutt
a6fff34ec6
Update TODO list
2016-03-31 18:02:51 -06:00
Gregory Nutt
d580b70a71
Minor updates to TODO list
2016-03-26 17:26:47 -06:00
Gregory Nutt
cc5a678a9e
Extend boardctl() USB device control to include PL2303 serial
2016-03-25 16:01:59 -06:00
Gregory Nutt
3e4ae24387
Fix a few issues related to new USB device boardctl() commands
2016-03-25 14:23:27 -06:00
Gregory Nutt
3886500459
Update TODO list
2016-03-24 13:10:45 -06:00
Gregory Nutt
4639cdd894
TCP timeouts: Fix some logic when there are multiple network interfaces. In this case, TCP timeout events can really only being processed when the poll from the correct device is received.
2016-03-20 08:19:00 -06:00
Gregory Nutt
24468128de
TLS: Simplify
2016-03-11 07:17:32 -06:00
Gregory Nutt
760fb63f33
Update README/TODO with new naming
2016-03-09 17:39:43 -06:00
Gregory Nutt
050b3ee06a
profcs task status will now show CPU is SMP is enabled
2016-02-19 15:34:36 -06:00
Gregory Nutt
3994b094c5
Remove some empty C file section comments; Update some text in TODO file
2016-02-19 10:01:15 -06:00
Gregory Nutt
fd94d7a675
Update TODO
2016-02-19 06:52:41 -06:00
Gregory Nutt
41d7c35e73
Trivial update to TODO
2016-02-18 13:39:09 -06:00
Gregory Nutt
7d9287958f
Minor simplication to last commit; Update TODO list
2016-02-18 09:21:43 -06:00
Gregory Nutt
52fbbaf778
1. SMP: Fix an assertion. SMP-specific change accidentally made in non-SMP code
...
2. Move list of signal actions from the task TCB to the task group. Signal handlers are a property of the entire task group and not of individual threads in the group. I know, I preferred it the other way too but this is more compliant with POSIX.
2016-02-18 08:34:54 -06:00
Gregory Nutt
269c242f7b
Update TODO list
2016-02-17 16:51:58 -06:00
Gregory Nutt
9cb2a6b1f9
Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore()
2016-02-14 16:19:15 -06:00
Gregory Nutt
7aa237973c
Update TODO
2016-02-09 11:25:29 -06:00
Gregory Nutt
68ee9bcaed
Refresh modules + plus minor clean-up from previous commits
2016-02-08 15:13:14 -06:00
Gregory Nutt
166ad58849
DHCPD no longer calls directly into the OS, but uses network IOCTL commands to modify the ARP table. Plus, fix a warning.
2016-02-08 12:08:18 -06:00
Gregory Nutt
0af9a197ac
ARP: Add IOCTL commands to manage the ARP table
2016-02-08 11:17:22 -06:00
Gregory Nutt
74db48202e
sched/: Replace explict references to g_readytorun with indirect references via the this_task() macro
2016-02-06 17:44:41 -06:00
Gregory Nutt
12f95c6f6b
Add procfs/kmm to show the state of the kernel heap
2016-02-06 11:35:30 -06:00
Gregory Nutt
52ef3b2d23
I2CTOOL: Now uses the I2C driver instead of direct calls into the OS
2016-02-02 10:24:49 -06:00
Gregory Nutt
2ec738d7ed
Update TODO
2016-02-01 16:34:18 -06:00
Gregory Nutt
6ad641888b
Add I2C frequency to the i2c_msg_s structure
2016-02-01 14:17:20 -06:00
Gregory Nutt
8c9bddf998
I2C: Eliminate the I2C_WRITE and I2C_READ macros
2016-02-01 08:57:22 -06:00
Gregory Nutt
d4a53ee131
I2C: Eliminate the I2C_WRITEREAD method
2016-01-26 10:26:16 -06:00
Gregory Nutt
c6d967e632
OVR2640: Reverse frequency/address
2016-01-16 09:05:39 -06:00
Gregory Nutt
8e9f884eb7
Step 1 in /etc/resolv.conf support
2016-01-13 15:06:44 -06:00
Gregory Nutt
530975a9b5
Fix typos in TODO
2016-01-13 15:03:28 -06:00
Gregory Nutt
47c8eaab58
Update TODO list
2016-01-13 11:08:05 -06:00
Gregory Nutt
8ee75a96fe
Update TODO list and Kconfig help
2016-01-13 07:44:44 -06:00
Gregory Nutt
a0c4c071ed
tools/cnvwindeps.c: Omit dependency paths that include spaces
2016-01-11 08:01:42 -06:00
Gregory Nutt
63f13283de
Upate TODO list
2016-01-03 11:59:43 -06:00
Gregory Nutt
c33724fc93
Update TODO list
2015-12-30 15:26:30 -06:00
Gregory Nutt
9835eeb181
signals: Basic framework to support SIGEV_THREAD
2015-12-30 13:20:31 -06:00
Gregory Nutt
3036e53be4
Update TODO list
2015-12-23 08:19:13 -06:00
Gregory Nutt
f9f19d867b
Trivial change to TODO list
2015-12-10 09:47:58 -06:00
Gregory Nutt
8fdb173090
drivers/net/telnet.c: Now works like the loop device. A new interface called telnet_initialize() registers a telnet session "factory" device at /dev/telnet. Via ioctl, the factory device can create instances of the telnet character devices at /dev/telnetN to support Telnet sessions.
2015-12-07 13:48:06 -06:00
Gregory Nutt
3f0bb06c54
Update ChangeLog
2015-12-06 16:41:50 -06:00
Gregory Nutt
8ac588f602
Update TODO
2015-11-28 17:28:25 -06:00
Gregory Nutt
64247fee15
Update TODO list
2015-11-28 15:04:11 -06:00
Gregory Nutt
25f48e5829
Update TODO file
2015-11-27 17:48:40 -06:00
Gregory Nutt
9d8462aa23
net/: Move net_procfs.c to net/procfs/. Partition logic a little better to make space to support net device procfs as well
2015-11-27 13:53:33 -06:00
Gregory Nutt
e4236941c6
net/net_procfs.c: Add basic support for networking procfs entries
2015-11-27 12:33:58 -06:00
Gregory Nutt
2a93c66948
include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics.
2015-11-26 12:08:09 -06:00
Gregory Nutt
ed35eb0f8d
drivers/loop: Add a loop character device that can be used to setup and teardown loop devices
2015-11-25 17:13:56 -06:00
Gregory Nutt
e665b3dba8
Update TODO list
2015-11-25 15:41:43 -06:00
Gregory Nutt
fb0a148812
Update ChangeLog/TODO
2015-11-25 12:02:25 -06:00
Gregory Nutt
23a62dec50
Update TODO
2015-11-21 11:58:26 -06:00
Stefan Kolb
5ac6de118e
libc/math/lib_asin.c: The function did not convert for some input values. Asin did not convert for values which do not belong to the domain of the function. But aside of that the function also did not convert for sine allowed values. I achieved a conversion of the function by reducing the DBL_EPSION and by checking if the input value is in the domain of the function. This is a fix for the problem but the function should always terminate after a given number of iterations. From Stefan Kolb.
2015-09-01 08:45:14 -06:00
Gregory Nutt
9d5a86753e
Update TODO list
2015-08-24 15:52:14 -06:00
Gregory Nutt
530d229361
net/udp: Add support for send() with connected UDP sockets
2015-08-11 19:17:55 -06:00
Gregory Nutt
597a7b2f52
Update TODO list
2015-08-11 16:13:05 -06:00
Gregory Nutt
36db0725c5
Update TODO list
2015-08-06 10:28:34 -06:00
Gregory Nutt
99664b7811
Sporadic scheduler: Add logic to collection the partial timer expiration when a sporadic thread is suspended in tickless mode
2015-07-26 15:03:47 -06:00
Gregory Nutt
4bdbc387f5
Update TODO list; Fix a few errors introduced withe the last changes to the sporadic scheduler
2015-07-26 10:51:04 -06:00
Gregory Nutt
27e21710fd
This is basically a complete redesign of the sporadic scheduling logic due to limitations in the initial design
2015-07-25 12:50:53 -06:00
Gregory Nutt
afc342c07b
Refresh submodules
2015-07-22 09:33:19 -06:00
Gregory Nutt
83f26091f4
Implement anti-aliasing in the NuttX graphics line drawing
2015-07-14 10:17:42 -06:00
Gregory Nutt
342f5fe33d
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
ce7955bae8
Update README and TODO list
2015-06-25 13:39:57 -06:00
Gregory Nutt
8ed9c24675
Fix a union file system bug
2015-06-24 09:07:13 -06:00
Gregory Nutt
712a14ab25
Update TODO list
2015-06-22 15:19:13 -06:00
Gregory Nutt
1933260618
SAML21 minor stuff
2015-06-14 14:27:58 -06:00
Gregory Nutt
4f05c80794
LPC17xx Ethernet: Improve CONFIG_NET_NOINTS implementation
2015-06-01 08:07:32 -06:00
Gregory Nutt
2b3241d81f
Clean up some logic in the CDC/ACM host drivers. Test with some other host controller drivers. There are lots of problems.
2015-05-14 10:22:08 -06:00
Gregory Nutt
4417728955
Re-implemened pthread_kill(). It as just a simple wrapper around kill() but since the correct dispatching of singles for multi-threaded task groups has been implemented, calling kill() does no work. The corrected implementation of pthread_kill() will direct the signal specifically to the specific pthread and no other.
2015-05-13 14:43:43 -06:00
Gregory Nutt
bd61b00b15
Update TODO list
2015-05-13 07:50:30 -06:00
Gregory Nutt
9df6bd0543
USB host CDC/ACM driver requires CONFIG_SERIAL_REMOVABLE
2015-05-11 15:10:41 -06:00
Gregory Nutt
980763be6f
Update TODO
2015-05-11 12:48:34 -06:00
Gregory Nutt
c7a02488c6
Fix a cut'n'paste error in the last commit
2015-05-10 10:23:23 -06:00
Gregory Nutt
e6ebdba913
OHCI: Fix length calculation in all OHCI drivers: CBP==0 means that the entire buffer was transferred, not that a null packet was tranaferred
2015-05-10 10:01:22 -06:00
Gregory Nutt
6c88d20e1a
Update TODO
2015-05-10 08:26:26 -06:00
Gregory Nutt
46e5d0a419
Add options to support all three host CDC/ACM protocols: Compliant, Reduced, and Bulk-Only
2015-05-10 08:16:58 -06:00
Gregory Nutt
4715a2e697
Update TODO list
2015-05-09 08:23:11 -06:00
Gregory Nutt
9aa9d661ac
Update TODO list; remove issues from old board ports
2015-05-06 07:01:33 -06:00
Gregory Nutt
599fce0780
Update TODO list
2015-05-03 18:00:59 -06:00
Gregory Nutt
50aa1e0939
Modbus: Misc cleanup
2015-04-07 12:16:15 -06:00
Gregory Nutt
591a9e7f65
Update TODO
2015-04-06 15:26:50 -06:00
Gregory Nutt
141846c6bf
Update TODO list and a README
2015-04-05 09:51:38 -06:00
Gregory Nutt
ae03d56700
Add a 'capped' boolean parameter to all drawline/drawLine functions/methods. The idea is that this will produce better joining between lines
2015-04-05 08:50:01 -06:00
Gregory Nutt
ddb8073ad5
Update TODO list and some comments
2015-03-16 08:49:39 -06:00
Gregory Nutt
b637a0cc3e
Costmetic changes name while debugging a filename issue
2015-03-15 12:22:12 -06:00
Gregory Nutt
9f7f258728
Add support for umount2(target, MNT_FORCE) in the FAT file system.
2015-03-15 07:45:19 -06:00
Gregory Nutt
b886cf9f65
Update TODO list
2015-03-14 17:58:41 -06:00
Gregory Nutt
f932b26db1
Add umount2(). umount() is now a macro that just calls umount2() with flags = 0.
2015-03-14 16:48:45 -06:00
Gregory Nutt
4c6057eca1
mq_timedsend(): Do check for time errors if the message queue is not full. Noted by Freddie Chopin
2015-03-10 09:42:35 -06:00
Gregory Nutt
36e88e504a
SAMV7: Update floating point and TCM configuration options. Update TODO list. Update comments. Refresh a configuration
2015-03-10 07:50:32 -06:00
Gregory Nutt
410fcaa0a1
Added a forward reference to struct inode to avoid warning about mismatching types in assignemnt
2015-02-10 13:41:49 -06:00
Gregory Nutt
f3427cb32a
mtd/ramtron.c: Table of parts is not terminated properly if CONFIG_RAMTRON_FRAM_NON_JEDEC is not defined
2015-02-09 16:35:58 -06:00
