1718 Commits

Author	SHA1	Message	Date
David Sidrane	052b45db0a	Added spacing back	2016-02-24 22:21:07 +00:00
David Sidrane	aa6968dcd5	Ensures frequency is updated on reinitalized bus	2016-02-24 12:02:11 -10:00
Gregory Nutt	9c63736c98	Standard some naming if code sectino comments	2016-02-21 18:06:09 -06:00
Gregory Nutt	441cd2bf1c	Fix a typo introduced in last set of name changes	2016-02-14 19:58:30 -06:00
Gregory Nutt	8b7dd552a3	Fix a typo introduced in last big set of name changes	2016-02-14 17:44:45 -06:00
Gregory Nutt	666cc280f4	Rename irqenable() to up_irq_enable(); rename irqdisable() to up_irq_disable()	2016-02-14 16:54:09 -06:00
Gregory Nutt	83bc1c97c3	Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore()	2016-02-14 16:11:25 -06:00
Gregory Nutt	70e502adb0	Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()	2016-02-13 19:11:09 -06:00
Gregory Nutt	3caffdd82e	Standardization of some naming in preparation for a large automated change	2016-02-13 12:57:09 -06:00
Gregory Nutt	a6eb9a351c	Add spinlock support for ARMv7-M architectures	2016-02-09 13:44:22 -06:00
Gregory Nutt	1166e311b0	Networking: Remove the HSEC argument from devif_timer.	2016-02-03 11:17:15 -06:00
Gregory Nutt	d2b2cd3415	Duplicate Manuel's EMAC driver fix to every other driver that supports CONFIG_NET_NOINTS	2016-02-03 10:33:22 -06:00
Manuel Stuehn	7236e742ab	STM32 Ethernet: Fix a cornercase where the TX poll timer is not restarted.	2016-02-03 08:24:49 -06:00
Gregory Nutt	1e4f2ae2c1	Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming	2016-02-02 12:08:23 -06:00
Gregory Nutt	d2571985ef	I2C: up_i2creset should not be a global function; Now it is an I2C interface method	2016-02-02 11:21:45 -06:00
Gregory Nutt	30624c8dfa	EFM32, STM32, and Tiva I2C Drivers: Clean up some kruft that is no longer needed after the last massive I2C interfcase change	2016-02-01 19:51:55 -06:00
Gregory Nutt	0693e76be8	I2C: Remove the setfrequency method from the interface	2016-02-01 16:30:29 -06:00
Gregory Nutt	a64f36a63e	I2C: Remove setaddress method	2016-02-01 12:14:20 -06:00
Gregory Nutt	ce988c7ed3	Remove the read and write methods from the I2C interface	2016-02-01 09:22:10 -06:00
Gregory Nutt	2171438c61	I2C_TRANSFER support is no longer optional	2016-01-31 14:00:53 -06:00
Gregory Nutt	531d73af41	Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.	2016-01-30 08:35:46 -06:00
Gregory Nutt	9f9b85a932	Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h	2016-01-30 07:59:44 -06:00
Freddie Chopin	8203659ee5	stm32_rtc_endwr(): wait for RTC_CRL_RTOFF bit to be set. This ensures that the write "reaches" RTC registers before access is disabled by stm32_pwr_enablebkp().	2016-01-28 16:58:02 -06:00
Gregory Nutt	04bbd8c67f	For STM32, rename up_spiinitialize to stm32_spibus_initialize	2016-01-26 12:22:27 -06:00
Gregory Nutt	c0fb4e34a7	I2C: Eliminate the I2C_WRITEREAD method	2016-01-26 10:23:09 -06:00
Gregory Nutt	b7cbbab761	Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law	2016-01-23 18:10:21 -06:00
Gregory Nutt	4bd6adb725	Add dummy hwfeatures method to all SPI interfaces	2016-01-23 15:09:38 -06:00
Gregory Nutt	5ebd84c890	Update to use 64-bit timer when available	2016-01-21 11:53:58 -06:00
Paul A. Patience	3ecdb0c21c	STM32 TIM: Fix comment	2016-01-19 17:02:00 -05:00
Gregory Nutt	b7e9fb9284	Merged in paulpatience/nuttx-arch/stm32_qencoder (pull request #52) ... STM32 QEncoder: Fix typo	2016-01-19 15:47:07 -06:00
Paul A. Patience	d81001326c	STM32 QEncoder: Fix typo	2016-01-19 16:44:21 -05:00
Paul A. Patience	26a434d76a	STM32 TIM: Fix typos and add forgotten bit	2016-01-19 15:49:03 -05:00
Frank Benkert	dd13fcde44	CAN: Add more extensive error reporting information	2016-01-18 12:21:20 -06:00
Gregory Nutt	74c7e3d0bf	STM32 OTF FS/HS Host. Fix two cases where stm32_putreg parameters were backward. Noted by Hang Xu	2016-01-18 08:10:37 -06:00
Paul A. Patience	196d379010	STM32 QEncoder: Fix some typos	2016-01-17 21:52:03 -05:00
Juha Niskanen	8a671d604d	stm32/chip: Fix STM32L15 TIM5 base address.	2016-01-11 07:25:50 -06:00
Gregory Nutt	ba0f5467d0	A few more cosmetic changes	2015-12-24 07:38:17 -06:00
Gregory Nutt	376b35be39	Mostly cosmetic changes from review for conformance to coding standard	2015-12-24 07:35:19 -06:00
pnb	400d06e9ec	fix capture bug	2015-12-24 12:26:39 +01:00
pnb	709c257a43	cosmetic	2015-12-24 09:45:02 +01:00
pnb	e22d8aea5d	add oter timer	2015-12-24 09:42:33 +01:00
pnb	cfe9555e24	capture start to works need test it more	2015-12-23 19:07:45 +01:00
pnb	54b275ec09	Merge branch 'master' of bitbucket.org:pnb990/nuttx-kernel-arch	2015-12-22 16:32:19 +01:00
pnb	9cc2119c4e	capture compile	2015-12-22 16:28:19 +01:00
pnb	badc0c2215	Merge remote-tracking branch 'upstream/master'	2015-12-22 13:29:31 +01:00
pnb	0ef3dc81aa	Merge branch 'master' of bitbucket.org:pnb990/nuttx-kernel-arch	2015-12-22 13:28:39 +01:00
pnb	7d244d4d04	Revert "add timer capture STM32" ... This reverts commit 7a484f4d7665c533998d6893c21b69340038b5fc.	2015-12-22 13:27:42 +01:00
pnb	764c9ea887	Revert "used DEFINE instead of setcapturecfg function to set filter and prescaler of input capture" ... This reverts commit 08600d05eb12cb4f62280766b7f780e8eaa2284b.	2015-12-22 13:27:35 +01:00
pnb	573462e355	Revert "continue capture integration" ... This reverts commit c0b6ba73d59dc973d6984bce12ff4a20d870de2a.	2015-12-22 13:27:00 +01:00
pnb	406bc5e67e	continue capture	2015-12-22 13:26:22 +01:00
Gregory Nutt	3e4fb7a60d	Merged in paulpatience/nuttx-arch/stm32_adc (pull request #42) ... STM32 ADC: Add DMA support for STM32F30xxx	2015-12-22 05:45:10 -06:00
pnb	f88e62c8e9	continue capture	2015-12-22 12:21:03 +01:00
Paul A. Patience	754a4ddb98	STM32 ADC: Add DMA support for STM32F30xxx	2015-12-22 03:42:37 -05:00
pnb	510dc7872d	Merge remote-tracking branch 'upstream/master'	2015-12-20 13:00:17 +01:00
pnb	2f78c0c1bc	continue capture integration	2015-12-20 12:54:21 +01:00
Gregory Nutt	727f0f47d6	Merged in paulpatience/nuttx-arch/stm32_pwm (pull request #40) ... STM32 PWM: Fix timer type bug	2015-12-18 18:47:41 -06:00
pnb	e25bc48d01	used DEFINE instead of setcapturecfg function to set filter and prescaler of input capture	2015-12-16 23:42:43 +01:00
pnb	701c386299	add timer capture STM32	2015-12-16 21:39:51 +01:00
Gregory Nutt	1cd73ec861	Merged in paulpatience/nuttx-arch/stm32_qencoder (pull request #41) ... STM32 QEncoder: Add support for STM32F30xxx	2015-12-15 14:13:44 -06:00
Paul A. Patience	377d29f1a1	STM32 QEncoder: Add support for STM32F30xxx	2015-12-15 12:13:37 -05:00
Gregory Nutt	26883fc7b9	Merged in paulpatience/nuttx-arch/stm32_tim (pull request #39) ... STM32 TIM: Remove some warnings, fix timer resolution bug and cosmetic changes	2015-12-14 16:59:51 -06:00
Paul A. Patience	b7e8e1fb99	STM32 TIM: Remove some warnings, fix timer resolution bug and cosmetic changes	2015-12-14 17:24:11 -05:00
Paul A. Patience	7274084540	STM32 PWM: Fix timer type bug	2015-12-14 17:21:55 -05:00
Gregory Nutt	dfec6a0dd0	Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU	2015-12-14 13:56:21 -06:00
Gregory Nutt	cbc2f226c0	Merged in paulpatience/nuttx-arch/stm32_pinmap (pull request #38) ... STM32: Fix typos in pinmaps	2015-12-14 08:59:47 -06:00
Paul A. Patience	89da1f27dd	STM32: Fix typos in pinmaps	2015-12-14 09:41:49 -05:00
Paul A. Patience	7589e940b6	STM32: Fix typos in STM32F30xxx pinmap	2015-12-14 09:36:28 -05:00
Gregory Nutt	daea1e614b	All architectures need to build ELF support if either CONFIG_ELF or CONFIG_MODULE are selected. Cortex-M7 also must support module cache corherence	2015-12-12 09:35:05 -06:00
Gregory Nutt	754aace61b	STM32: CCM procfs more typos	2015-12-01 16:28:14 -06:00
Gregory Nutt	bc74aa322b	STM32: Fix a couple of typos in STM32 CCM procfs	2015-12-01 16:20:51 -06:00
Gregory Nutt	1f82dda9d8	Clean up some naming	2015-12-01 15:04:12 -06:00
Gregory Nutt	548ba1640f	STM32: CCM procfs is no longer a part of the 'base' procfs entries and can now only be supported via run time registration with CONFIG_FS_PROCFS_REGISTER=y	2015-12-01 14:55:05 -06:00
Gregory Nutt	7037f13c2d	Trivial cosmetic change from review	2015-11-30 18:01:26 -06:00
Wail Khemir	fd8db7ad38	Change prescaler dynamically to support bigger periods on 16 bits timers	2015-11-30 18:52:05 -05:00
Gregory Nutt	8ce454a584	Remove some warnings; eliminate unused variables	2015-11-26 12:46:53 -06:00
Gregory Nutt	b1e17d8892	Fix some conditional compilation. CONFIG_LIBC_LOCALTIME should be checked in most of the same places wehre CONFIG_TIME_EXTENDED is checked	2015-11-25 12:51:07 -06:00
Gregory Nutt	30834721df	Trivial changes for compliance with coding standard	2015-11-20 17:53:03 -06:00
Wail Khemir	702368fce4	Small bug fix for stm32 lower half timer driver	2015-11-20 18:16:39 -05:00
Gregory Nutt	25a2e17347	Rename up_rtcinitialize to up_rtc_initialize so that it looks like other RTC interfaces	2015-11-20 08:27:04 -06:00
Gregory Nutt	25e54726a3	STM32: Fix a build error detected by tools/testbuil.sh: The STM32L does not define UID address	2015-11-18 14:33:27 -06:00
Gregory Nutt	a6d6c430d9	Changes to last merge from review for compliance to coding standards	2015-11-17 21:10:17 -06:00
Marwan Ragab	4999c14085	Added implementation to get 96-bit stm32 unique id	2015-11-17 21:34:41 -05:00
Gregory Nutt	a8ab72f97a	Fix some stylistic issues found by tools/nxstyle	2015-11-17 17:31:38 -06:00
Gregory Nutt	3c84aa3b5f	(Hopefully) cosmetic changes from review of recent merges for conformance to coding standard	2015-11-17 16:53:21 -06:00
Wail Khemir	9451b09d3a	Added a lower-half timer driver for stm32 which is compatible with the upper-half driver located at /drivers/timers/timer.c	2015-11-17 16:57:02 -05:00
Paul A. Patience	52454cf79b	Fix typo	2015-11-11 13:06:15 -05:00
Gregory Nutt	1c79e77811	ARMv7-M: Minor naming change to improve readability	2015-11-06 11:24:52 -06:00
Paul A. Patience	7d793bb99b	STM32 ADC: Add support for STM32F30xxx	2015-11-05 10:13:58 -05:00
Gregory Nutt	96cee3709a	Merged in paulpatience/nuttx-arch/stm32_pwm (pull request #28)	2015-11-01 16:51:32 -06:00
Paul A. Patience	4c2c989838	STM32 PWM: Add support for multiple output channels	2015-11-01 17:11:35 -05:00
Gregory Nutt	79df561669	Rename board_led_off to board_autoled_off	2015-11-01 09:09:36 -06:00
Gregory Nutt	b28e32e3d3	Rename board_led_on to board_autoled_on	2015-11-01 09:07:06 -06:00
pnb	d1b4d55343	pwm duty can by zero	2015-11-01 14:45:12 +01:00
pnb	0090cfe6d4	Change name of HAVE_TIMx_PWM_OUTPUT into HAVE_TIMx_GPIOCONFIG	2015-10-31 16:00:24 +01:00
pnb	668c56b1a6	avoid warning unsused function when GPIO_TIMxCHxOUT declared in board and CONFIG_STM32_TIMx not enable but an other CONFIG_STM32_TIMx is enabled	2015-10-31 15:42:00 +01:00
Gregory Nutt	22ea50464f	Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32_qencoder (pull request #23) ... Enhance STM32 QEncoder driver with configurable input filters	2015-10-22 18:28:22 +08:00
Gregory Nutt	e3d44ace60	Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f429_pinmap (pull request #22) ... Add missing pin definitions on STM32F429, specifically pins available on STM32F429N chip	2015-10-22 18:26:53 +08:00
Gregory Nutt	04705d14df	Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f373_exti (pull request #21) ... Add EXTI definitions for STM32F373	2015-10-22 18:21:45 +08:00
Gregory Nutt	2b078150e8	Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f429n (pull request #20) ... Add support for STM32F429N (TFBGA) chip	2015-10-22 18:19:52 +08:00
Gregory Nutt	c87c50df14	Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32_PLLSAI (pull request #19) ... Fix setup of PLLSAI in STM32F4xx.	2015-10-22 18:17:21 +08:00
Marten Svanfeldt	3299a31b27	Enhance STM32 QEncoder driver with configurable input filters ... Current driver applies a fixed filter of f_sample=f_dts/4, N=6. This can potentially be insufficient in noisy environments, or too slow for really fast encoder sources, so let the user set it from the Kconfig file Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>	2015-10-21 11:06:01 +08:00
Marten Svanfeldt	fdb484f24e	Add missing pin definitions on STM32F429, specifically pins available on STM32F429N chip ... Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>	2015-10-21 10:56:36 +08:00
Marten Svanfeldt	d1c7e5b5fb	Fix setup of PLLSAI in STM32F4xx. ... To correctly setup the PLLSAI register it is required to first mask out the old PLL divisor and multiplier factors before setting new ones Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>	2015-10-21 10:33:39 +08:00
Marten Svanfeldt	4d879a33ee	Add support for STM32F429N (TFBGA) chip ... Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>	2015-10-21 10:30:57 +08:00
Marten Svanfeldt	54b333dcd3	Add EXTI definitions for STM32F373 ... Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>	2015-10-21 10:22:41 +08:00
Paul A. Patience	08175bef58	STM32 PWM: Add ifdef for STM32F30XX	2015-10-09 17:20:42 -04:00
Gregory Nutt	a326b79b25	Merged in paulpatience/nuttx-arch (pull request #17) ... STM32: Fix some incorrect configurations in Kconfig file	2015-10-09 14:13:02 -06:00
Paul A. Patience	253e112b4a	STM32: Fix some incorrect configurations in Kconfig file	2015-10-09 13:47:22 -04:00
Max Kriegler	a20a61caef	STM32 F4: Correct pin mapping for TIM12 Channel 2	2015-10-09 10:32:46 -06:00
Gregory Nutt	d90f597a05	More spacing/alignment issues	2015-10-08 19:31:58 -06:00
Gregory Nutt	beb060d422	Yet more spacing issues	2015-10-07 20:24:19 -06:00
Gregory Nutt	a92842906f	STM32: Fix a search-and-replace error in previous commit	2015-10-07 19:58:05 -06:00
Gregory Nutt	53f6fd6e66	STM32: Correct some spacing issues	2015-10-07 13:45:15 -06:00
Lederhilger Martin	a9c8458458	STM32 PWM: Add logic to handle writes to 32-bit registers properly	2015-10-06 07:29:37 -06:00
Gregory Nutt	aaa697ec83	Remove dangling whitespace	2015-10-04 15:27:17 -06:00
Gregory Nutt	6fc6d17760	Fix some spacing problems	2015-10-04 14:59:08 -06:00
Gregory Nutt	9caf33e13b	Standardize the width of all comment boxes in C header files	2015-10-03 07:28:30 -06:00
Gregory Nutt	7ced84c5f0	Standardize the width of all comment boxes in C files	2015-10-03 07:25:03 -06:00
Gregory Nutt	36726b1bc4	Standardize the width of all comment boxes in header files	2015-10-02 17:42:29 -06:00
Gregory Nutt	ddf936c913	Various fixes for compilation issues found by tools/testbuild.sh	2015-10-01 11:09:39 -06:00
Gregory Nutt	166d307add	STM32: Fix conditional compilation of TIM SYSLOG initialization	2015-10-01 08:39:21 -06:00
Lederhilger Martin	7d72d1defc	STM32 ADC: Fix some cut'n'paste typos in ADC header file	2015-09-30 07:21:50 -06:00
Gregory Nutt	473a3cf2a6	STM32: Trivial chnages from review of merge	2015-09-23 15:00:47 -06:00
pnb	f19c5e883d	add swo for stm32F4xxx	2015-09-23 22:51:22 +02:00
Gregory Nutt	7a2428819f	Minor style: # if pre-processor command should be in columnn 1	2015-09-18 12:47:24 -06:00
Gregory Nutt	39859a9645	All ARMV7-M: Force 8-byte stack alignment when calling from assembly to C to interrupt handling	2015-09-15 07:37:09 -06:00
Gregory Nutt	f7ca98c5ae	Fix error in almost all ARMv7-M interrupt stack handling	2015-09-14 07:07:13 -06:00
Paul A. Patience	260778feb1	Fix typo	2015-09-10 21:07:03 -04:00
Gregory Nutt	e354853776	Elminiate some warnings	2015-09-08 09:18:59 -06:00
Gregory Nutt	d8c83218fe	Eliminate warnings	2015-09-08 08:27:34 -06:00
Gregory Nutt	7065f78b92	Eliminate a warning	2015-09-08 08:18:01 -06:00
Gregory Nutt	cfd41bdb30	STM32: Eliminate some warnings	2015-09-07 16:25:54 -06:00
Gregory Nutt	975d912b40	Cosmetic: Move # of pre-processior command to column 1	2015-09-05 09:07:37 -06:00
Gregory Nutt	544ed7cdbd	Purely cosmetic changes from code review	2015-09-04 16:36:43 -06:00
David Sidrane	9c13fa3f67	Added suport for overriding the STM32 flash size. To allow the use of STM32F2 and STM32F4 devices with F, G, I flash designations	2015-09-04 10:26:09 -10:00
Ilya Averyanov	f2b5f05124	STM32 Ethernet: stm32_ifdown() prototyped twice	2015-09-02 08:23:45 -06:00
Paul A. Patience	a0dc724a5d	Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1.	2015-09-01 13:47:06 -04:00
Gregory Nutt	70f1a49fbe	arch/arm/src/up_iternal.h and several ARM Make.defs files: In the original implementation, NOT defined(CONFIG_ARMV7M_CMNVECTOR) was a sufficient test to determine if lazy floating point register saving was being used. But recents changes added common lazy register as well so now that test must be (NOT defined(CONFIG_ARMV7M_CMNVECTOR) || defined(CONFIG_ARMV7M_LAZYFPU)).	2015-08-31 08:40:02 -06:00
David Sidrane	98ce2b2912	Fixed Mask and made configuration macros consistant	2015-08-24 08:56:24 -10:00
David Sidrane	b95c642a88	Added Kconfig Enable Support for SAI and I2S PLL	2015-08-24 08:55:45 -10:00
David Sidrane	6559c8994a	Remove the word NOT - that was used to test the fix.	2015-08-21 18:51:28 -06:00
David Sidrane	390c777a2a	Removed the word NOT - that was used to test the fix.	2015-08-21 18:40:20 -06:00
Gregory Nutt	4c0d36740d	Some of the last review chnages were still in the editor	2015-08-21 18:25:10 -06:00
Gregory Nutt	9a32e907df	Trivial, cosmetic changes from review of merge	2015-08-21 18:22:57 -06:00
Gregory Nutt	16c5be9767	Merged in david_s5/arch/upstream_446 (pull request #7) ... Upstream_446	2015-08-21 18:11:05 -06:00
David Sidrane	9d64050d68	Added Changes to support for the new USB OTG controller for F446 register map	2015-08-21 13:57:08 -10:00
David Sidrane	7c96342c63	Break the stm32_otg.h into an stm32fxxxxx and stm32f44xx (should work on F7) versions	2015-08-21 13:55:06 -10:00
David Sidrane	5d1ff3f7e1	Use read modify write on PLL and CFG registers	2015-08-21 13:22:09 -10:00
David Sidrane	1c746edceb	Added PLL P constants	2015-08-21 13:20:16 -10:00
Gregory Nutt	da6c5aabdf	All ARMV7-M IRQ setup: Always set the NVIC vector table address. This is needed in cases where the code is running with a bootload and when the code is running from RAM. It is also needed by the logic of up_ramvec_initialize() which gets the vector base address from the NVIC. Suggested by Pavel Pisa	2015-08-21 08:42:24 -06:00
Gregory Nutt	0db7ac92d9	Minor coding style fixes in last commit; remove some unneeded debug output	2015-08-19 07:54:46 -06:00
SaeHie Park	75626fb071	STM32: Fix eth mem leak in recvframe	2015-08-19 15:40:04 +09:00
Gregory Nutt	b7d6720a23	All CAN drivers: Set the new error indication to zero in the CAN message report	2015-08-18 07:24:12 -06:00
Paul A. Patience	c800841632	Added definitions for STM32F303K6, STM32F303K8, STM32F303C6, ... STM32F303C8, STM32F303RD, and STM32F303RE devices.	2015-08-17 14:00:49 -04:00
Gregory Nutt	ba6c0b3fa3	Fix more common typos	2015-08-16 11:06:29 -06:00
Gregory Nutt	e29220183a	Fix some common typos	2015-08-16 10:59:10 -06:00
Gregory Nutt	f7350568f3	STM32 ADC changes suggested by Max Kriegleder	2015-08-04 06:29:40 -06:00
Gregory Nutt	095d2d3eee	Fix a typo in the STM32 F2 DMA header file	2015-07-30 16:03:52 -06:00
Gregory Nutt	2c5a6831cd	ADC DMA should work on the F2 as well because the DMA is equivalent on the F2 and F4	2015-07-30 15:49:33 -06:00
Max Kriegler	9ed14b0924	STM32 ADC: Add DMA support for the STM32 F4 family. From Max Kriegler	2015-07-30 08:47:45 -06:00
Juha Niskanen	7407e41569	Add CONFIG_ADC_NO_STARTUP support for STM32 F1 (untested)	2015-07-30 07:42:31 -06:00
Gregory Nutt	5b46df9c49	Fix compile error from last ADC change	2015-07-29 17:37:35 -06:00
Juha Niskanen	3d32eb9465	tm32_adc: Add STM32L152XX ADC support ... Porting from Thingsee OS. Credits: Dmitry Nikolaev wrote most of the code, Teemu Pirinen from Offcode Ltd. contributed support for changing single shot adc channel, minor tweeks by Jussi Kivilinna and Juha Niskanen Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com> Includes additional changes from review.	2015-07-29 08:34:27 -06:00
Gregory Nutt	032c237865	Minor modifications from review of previous commits	2015-07-29 08:34:01 -06:00
Gregory Nutt	90ac233e09	Minor modifications from review of previous changes	2015-07-29 08:32:23 -06:00
Juha Niskanen	ddc93995a0	chip/stm32_adc.h: Add defines for STM32L152XX ADC support ... Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>	2015-07-29 07:38:29 -06:00
Juha Niskanen	f4812bfbf9	stm32/chip: Add some STM32L15XX support bits (from Thingsee) ... Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>	2015-07-29 07:36:21 -06:00
Gregory Nutt	39192c3537	Fix a compile error found by tools/tesbuild.sh	2015-07-22 15:45:47 -06:00
David Sidrane	778c630c6b	Add support for the STM32446. From David Sidrane	2015-07-22 07:26:53 -06:00
David Sidrane	5c5df7aefe	STM32 F229: Fix bad inclusion guard in a header file	2015-07-21 11:25:29 -06:00
Gregory Nutt	4a5f66481d	STM32 F7: Add FLASH and SYSCFG header files	2015-07-18 10:06:44 -06:00
Gregory Nutt	f45f0ab59a	STM32 RCC: Fix some more typos in STM32 RCC header files	2015-07-17 12:16:29 -06:00
Gregory Nutt	bd711c038d	STM32 RCC: Fix what looks like a double paste	2015-07-17 12:00:46 -06:00
Gregory Nutt	7eb5e7f9ec	STM32F746G-DISCO: Getting closer to a build	2015-07-17 11:47:16 -06:00
Sebastien Lorquet	7f7082f938	Extend STM32 Ethernet operating frequency to 180MHz: ... -Extend frequency range options to 180 MHz for STM32 ETH_MACMIIA_CR -Fix a typo in a frequency range option in LPC43 -Only configure the PPS GPIO if the PTP protocol is enabled From Sebastien Lorquet	2015-07-17 07:44:12 -06:00
Gregory Nutt	1ed5f5a3ed	STM32: Move STM32F42xxx IRQ definitions out of stm32f40xxx_irq.h into their own stm32f42xxx_irq.h header file	2015-07-15 13:52:20 -06:00
Gregory Nutt	629b37deec	STM32: Fix a minor error in new STMF42* header files	2015-07-15 13:21:39 -06:00
Gregory Nutt	abbfbb0716	STM32: Move STM32F42xxx vector definitions out of stm32f40xxx_vector.h into their own stm32f42xxx_vector.h header file	2015-07-15 13:02:55 -06:00
Gregory Nutt	0d0bbafbc5	STM32: Move STM32F42xxx SYSCFG definitions out of stm32f40xxx_syscfg.h into their own stm32f42xxx_syscfg.h header file	2015-07-15 12:54:15 -06:00
Gregory Nutt	7666fde938	STM32: Move STM32F42xxx RCC definitions out of stm32f40xxx_rcc.h into their own stm32f42xxx_rcc.h header file	2015-07-15 12:50:04 -06:00
Gregory Nutt	987c010c1f	STM32: Move STM32F42xxx DMA definitions out of stm32f40xxx_dma.h into their own stm32f42xxx_dma.h header file	2015-07-15 12:38:33 -06:00
Gregory Nutt	1d7789caa6	STM32: Move STM32F42xxx pinmap definitions out of stm32f40xxx_pinmap.h into their own stm32f42xxx pinmap.h header file	2015-07-15 12:28:45 -06:00
Gregory Nutt	1f5e16dc95	Fix some warnings/errors detected by nuttx/tools/testbuilds.sh	2015-07-10 18:41:26 -06:00
Gregory Nutt	51df91e93d	STM32 RTCC: Eliminate a warning when ALARM support is enabled	2015-07-02 15:02:59 -06:00
Gregory Nutt	46fec91b12	Remove a warning	2015-07-01 18:25:13 -06:00
Gregory Nutt	fb926e7283	Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation	2015-06-28 08:08:57 -06:00
Gregory Nutt	29136e51cc	Clean up and review of header files for conformance to standards	2015-06-12 19:26:01 -06:00
Gregory Nutt	7bd3d5eaf1	Clean up and review of header files for conformance to standards	2015-06-12 19:00:52 -06:00
Gregory Nutt	7fab748667	STL32 F15x: stm32_stdclockconfig() was calling stm32_pw_setvos() which accessed PWR_CR via an inactive APB. From Juha Niskanen.	2015-06-11 08:09:36 -06:00
Gregory Nutt	4e811aa54d	Add basic support for the STM32F205RG. From SourceForge Ticket 40 (anonymous).	2015-05-31 13:06:26 -06:00
Gregory Nutt	d41b050526	Fix another missing semicolon after DEBUGASSERT	2015-05-27 11:49:19 -06:00
Gregory Nutt	528275a77c	Fix some typos	2015-05-27 07:34:35 -06:00
Gregory Nutt	4a60f1c9f5	STM32: Building stm32_rng.c should be conditioned on CONFIG_STM32_RNG, not CONFIG_DEV_RANDOM. From Juha Niskanen	2015-05-21 07:47:22 -06:00
Gregory Nutt	0883ea1af0	USB host drivers: Cannot take semaphores in cancel() method	2015-05-14 09:58:21 -06:00
Gregory Nutt	5fad63c28a	STM32/EFM32 USB host drivers. Remove some detritus left from previous change	2015-05-14 07:55:55 -06:00
Gregory Nutt	c2c7dadf0f	The USB host cancellation now applies to all transfers and so it no longer conditional	2015-05-11 12:04:03 -06:00
Gregory Nutt	cac9879ad2	EHCI HCDs will now support cancellation of syncrhonous transfers	2015-05-11 11:43:31 -06:00
Gregory Nutt	3f092b8f9c	STM32 and EFM32 host will now support cancellation of synchronous methods	2015-05-11 11:15:28 -06:00
Gregory Nutt	0536435ff8	Correct an error recently introduced in the STM32 and EFM32 USB host controller drivers. ... The test for data partially transferred is incorrectec: chan->xfrd != xfrlen Should be chan->xfrd > 0 From Ronly XLN.	2015-05-11 09:04:25 -06:00
Gregory Nutt	6e5a4e8b5e	Add EXTI line definitions for the STM32L family.	2015-05-09 09:03:14 -06:00
Gregory Nutt	4250bb5138	STM32 F3: Add DBGMCU register definitions for the F3 family. From Greg Meiste.	2015-05-09 06:05:17 -06:00
Gregory Nutt	aaaa8f2e9d	Adds support for STM32F302K8 and STM32F302K6. From Ben Dyer via PX4/David Sidrane.	2015-05-08 14:10:55 -06:00
Gregory Nutt	b8483aea40	In go_os_start that sets the IDLE thread stack coloration, mov does not set condition codes which are tested by the following beq. Need to use movs instead. Noted by David Sidrane	2015-05-07 20:36:08 -06:00
Gregory Nutt	8f959373e1	USB host: Modify the transfer() and asynch() methods so that the actual size of the transfer is returned. Unverified on initial commit.	2015-05-05 13:14:22 -06:00
Gregory Nutt	93b251b372	Cosmetic changes	2015-05-05 06:42:58 -06:00
Gregory Nutt	12bf2aa3be	Correct description of some input parameters. Suggested by Pelle Windestam	2015-05-05 06:26:59 -06:00
Gregory Nutt	d824979cec	Merge remote-tracking branch 'origin/master' into usbhub	2015-05-02 11:39:08 -06:00
Gregory Nutt	b3d12c6026	STM32 USB device. Add protection in the event that out-of-bound enpoint numbers are received. From David Sidrane.	2015-05-02 10:58:27 -06:00
Gregory Nutt	823af4b409	USB host: Need to include the port structure when disconnecting, otherwise may destroy a root hub port	2015-05-02 10:44:18 -06:00
Gregory Nutt	5a2ed0f6c1	Merge remote-tracking branch 'origin/master' into usbhub	2015-05-01 15:38:48 -06:00
Gregory Nutt	e76b7d99fa	Added missing EXTI definitions for the STM32 F3; Correct an error the port D base address in the STM32 F3 and F37 memory maps. From Greg Meiste.	2015-05-01 07:31:56 -06:00
Gregory Nutt	149d8c039d	EFM32 USB host: Add missing trace data and some missing connection-related logic; update a configuration	2015-04-30 13:46:53 -06:00
Gregory Nutt	501d82928d	STM32/EFM32 USB host: Implemented asynchronous cancel method	2015-04-30 11:24:18 -06:00
Gregory Nutt	c096b7d426	USB Hub: Fix compile problems when hub debug enabled	2015-04-30 08:12:55 -06:00
Gregory Nutt	a4455d07c1	STM32 HUB: Fix more compilation errors when hub support is enabled	2015-04-30 08:00:41 -06:00
Gregory Nutt	2f7682f7df	Fix some errors in initial re-verification of USB host on the STM32F4-Discovery	2015-04-30 07:28:30 -06:00
Gregory Nutt	d4feb7205f	First cut, dirty conversion of EFM32, STM32 FS and HS host drivers to the new interfaces	2015-04-29 15:53:58 -06:00
Gregory Nutt	d3ef23e05a	STM32 PVD: Adds support for STM32's Programmable Voltage Detector feature. I put register access behind CONFIG_STM32_ENERGYLITE as have not checked F1/F2/F4 etc. manuals. Tested on STM32L1. PVD interrupt looks generic, at least #defines it needs are in headers for every chip variant. By Dmitry Nikolaev, submitted by Juha Niskanen.	2015-04-28 06:37:59 -06:00
Gregory Nutt	d77a19f0a2	Two r's and only two r's in the word interrupt	2015-04-23 14:04:43 -06:00
Gregory Nutt	aaeb9843d6	STM32 RTC counter: Include enable/disable backup domain within critical section. Per recommendtion of Alexander Oryshchenko.	2015-04-21 18:08:31 -06:00
Gregory Nutt	47f2a0b09d	STM32 F1 RT Counter: Another fix from Darcy Gong	2015-04-19 07:05:39 -06:00
Gregory Nutt	2d2f645e77	STM32 F1 RTC Counter: Now need to enable backup domain write access when setting the time. From Darcy Gong	2015-04-19 06:58:07 -06:00
Gregory Nutt	4c0b8fba52	Fix an error introduced into stm32_pwr_enablebkp(). That function must preserve the previous state of backup domain access on return.	2015-04-18 07:31:20 -06:00
Gregory Nutt	383f6c52dd	STM32 - cosmetic changes to indentation	2015-04-16 16:35:06 -06:00
Gregory Nutt	5f7f2b6461	STM32 DMA2D: Use helper function when freeing layers. From Marco Krahl	2015-04-16 11:16:14 -06:00
Gregory Nutt	5d221fa356	Add support for the new DMA2D features to the STM32F429i-Disco LTDC configuration. From Marco Krahl.	2015-04-16 09:11:53 -06:00
Gregory Nutt	7a6a5b7bd0	Defines a second interface for the dma2d controller. Controlling both LTDC and DMA2D was unpractical from the programmers view because both controllers are to different. LTDC only controls the display visibility but the DMA2D controller changes the content of the frame buffer (buffer of the layer). ... The main features are: 1. DMA2D interface Supports the nuttx pixel formats: - FB_FMT_RGB8 - FB_FMT_RGB24 - FB_FMT_RGB16_565 Dynamic layer allocation during runtime for the supported formats - The number of allocatable layer can be configured. Supported dma2d operation: - blit (Copy content from source to destination layer) also works with selectable area. - blend (Blend two layer and copy the result to a destination layer wich can be a third layer or one of the source layer) also works with selectable area. - fillarea (Fill a defined area of the whole layer with a specific color) As a result of that the dma2d controller can't transfer data from the core coupled memory, CCM is disabled but usable by the ccm allocator. Currently the ccm allocator is used for allocating the layer structurei only. For the dma memory (layers frame buffer) memory is allocated from heap 2 and 3. 2. LTDC interface I have changed the api for the currently non implemented operations: - blit (Copy content from a dma2d layer to an ltdc layer) also works with selectable area. - blend (Blend two dma2d layer and copy the result to a destination ltdc layer) also works with selectable area. Note! ltdc layer is a layer referenced by the ltdc interface. dma2d layer is a layer referenced by the dma2d interface. One of the most important questions for me was, How can i flexible use an ltdc layer with the dma2d interface, e.g. as source layer for dma2d operations? Get the layer id of the related dma2d layer by a special flag when using getlid() function of the ltdc interface and use the layer id to reference the specific dma2d layer by the dma2d interface. The ltdc coupled dma2d layers are predefined and can't be dynamically allocated of freed. They use the same frame buffer memory and the same color lookup table. Changes: - layer internal format of the clut table - interrupt handling for register reload (vertical vblank) instead using waiting loop - small fixes and refactoring From Marco Krahl.	2015-04-16 09:11:52 -06:00
Gregory Nutt	cbcfb44942	STM32 IWDG typo fix. from chenming582892	2015-04-15 20:13:56 -06:00
Gregory Nutt	6b7a0cb3b8	Revert commit b80e8be652dfa52e97daa65aa3e550cf31cb2409	2015-04-12 06:26:50 -06:00
Gregory Nutt	9ece96b6d3	Remove all traces of CONFIG_ARMV7M_STACKCHECK	2015-04-11 10:01:44 -06:00
Gregory Nutt	0a675b8ca4	STM32 changes from David Sidrane	2015-04-11 07:19:20 -06:00
Gregory Nutt	2cdc5f99b9	STM32 CAN: More places where FR instead FIR used	2015-04-09 19:30:19 -06:00
Gregory Nutt	321ccb3ba3	Fix several typos in comments	2015-04-09 16:13:03 -06:00
Gregory Nutt	abea446dfa	Missing i found by David Sidrane	2015-04-09 15:16:05 -06:00
Gregory Nutt	fe38ca23e5	Cosmetic	2015-04-09 07:59:31 -06:00
Gregory Nutt	ae15c6963c	Make some file section headers more consistent with standard	2015-04-08 08:04:12 -06:00
Gregory Nutt	dd3457173d	Implements CONFIG_TIME_EXTENDED as we discussed relative to providing the last 3 members of the tm struct and support for filling them in and even using the wday in the STM32 RTC. From David Sidrane.	2015-04-08 06:56:43 -06:00
Gregory Nutt	c226d51c3c	STM32: Another fix to RTC magic register from David Sidrane	2015-04-06 17:21:53 -06:00
Gregory Nutt	e0a49a81e4	Add conditional logic so that people who use F1 don't have to be bother with meaningless RTC MAGIC settings	2015-04-06 16:35:56 -06:00
Gregory Nutt	8461827dcd	STM32 RTCC: Make back-up register and magic value used by RTCC configurable. From David Sidrane	2015-04-06 16:26:59 -06:00
Gregory Nutt	e1e0fc259c	Typo fixes from David Sidrane	2015-04-06 15:27:37 -06:00
Gregory Nutt	69d2d77424	Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/.	2015-04-01 12:37:44 -06:00
Gregory Nutt	f073092fad	The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work. ... In stm32_rtcc.c the up_rtcinitialize() logic doesn't work with the LSI. The check on RTC_MAGIC on the BK0R register lead to rtc_setup() call that rightfully enables the lsi clock; but the next times, when the rtc is already setup, the rtc_resume() call does NOT start the lsi clock! The right place to put LSE/LSI initialisation is inside stm32_stdclockconfig() in stm32fxxxxx_rcc.c. Doing this I checked the possible uses of the LSI and the LSE sources: the LSI can be used for RTC and/or the IWDG, while the LSE only for the RTC (and to output the MCO1 pin).. This change is not verifed for any other platforms. From Leo Aloe3132	2015-03-29 15:34:48 -06:00
Gregory Nutt	db52134d47	STM32 RTC lower-half: Fix some errors that cause compilation failures. From shilo.xyz	2015-03-19 12:56:47 -06:00
Gregory Nutt	265af48120	STM32 serial: Make input hardware flow-control work with RX DMA. From Jussi Kivilinna	2015-03-13 07:18:21 -06:00
Gregory Nutt	b8476c7ee8	STM32: Fix RX DMA setup for UART5. From Jussi Kivilinna.	2015-03-13 07:06:46 -06:00
Gregory Nutt	f8c73c3499	stm32: usbdev: Fix stale initialization invalidating later NULL check. From Juha Niskanen	2015-03-12 08:08:50 -06:00
Gregory Nutt	6511afa1c2	stm32_i2c: Add missing NULL check. From Juha Niskanen	2015-03-12 07:53:41 -06:00
Gregory Nutt	d8a99fb73f	SAMV71-XULT: Enable 64-bit floating point support	2015-03-11 12:30:14 -06:00
Gregory Nutt	9bcdf974a0	Add new common lazy FPU state saving option for ARMv7-M. Not yet verified	2015-03-06 08:26:43 -06:00
Gregory Nutt	b6b50f5f42	Fix some BBRAM return values (from David Sidrane). Also some MTD-related cosmetic changes	2015-03-05 08:08:11 -06:00
Gregory Nutt	466b69fe00	Add missing SPI callback functions to the STM32 SPI driver. From Freddie Chopin	2015-03-04 06:52:46 -06:00
Gregory Nutt	32067448d7	Add support for new STM32L1 chip variant. From Juha Niskanen	2015-03-04 06:33:44 -06:00
Gregory Nutt	5eba2afbd6	STM32 BBSRAM driver updated by David Sidrane	2015-03-03 16:05:24 -06:00
Gregory Nutt	33ac85adcb	Adds architecture support for the STM32F372 and F373 (no board support yet). Only tested on STM32F373CC, but should work on the rest. Contributed by Marten Svanfeldt.	2015-03-02 10:33:42 -06:00
Gregory Nutt	429863f348	arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions	2015-02-27 17:19:38 -06:00
Gregory Nutt	0dc70108b8	STM32: Fix for compilation introduced by last backup RAM change. Not sure it it is correct, be now things do compile	2015-02-21 17:51:03 -06:00
Gregory Nutt	63711ad338	Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane.	2015-02-21 15:15:51 -06:00
Gregory Nutt	7d43cf2087	Changes to support fully write protecting the backup domain. N.B. stm32_pwr_enablebkp did not account for the delay from enable to the domain being writable. The KISS solution is a up_udelay. A more complex solution would be a negated write test with restore. From David Sidrane.	2015-02-21 14:53:33 -06:00
Gregory Nutt	ac0cd3655a	Fix some time value changes; mostly changing greater than 1000000000 to greater than or equal to 1000000000. From Juha Niskanen	2015-02-20 07:07:36 -06:00
Gregory Nutt	2532e33de2	VFS: The inode unlink method should not be support if operations on the root pseudo-filesystem are disabled.	2015-02-18 09:34:58 -06:00
Gregory Nutt	d3196ca5c3	The RTC ioctl() method is now a configuration option	2015-02-18 08:23:10 -06:00
Gregory Nutt	57eb72a13f	Add an IOCTL method to the RTC interface	2015-02-18 08:05:31 -06:00
Gregory Nutt	0081b0840b	Missed a Kconfig definition in the last commit	2015-02-16 10:41:12 -06:00
Gregory Nutt	c747521953	STM32 RTC: Extend the RTC interface to support reading subseconds. From Jussi Kivilinna	2015-02-16 07:18:09 -06:00
Gregory Nutt	529bc9626c	Add support for RTC driver to the STM32F4-Discovery board	2015-02-15 10:11:01 -06:00
Gregory Nutt	68d39b69aa	Remove an unused variable	2015-02-15 08:51:39 -06:00
Gregory Nutt	726b0d5f58	RTC: A little more clean-up of the RTC driver	2015-02-15 08:19:23 -06:00
Gregory Nutt	53322a50f4	STM32 RTC: Implement the rdtime() method of the RTC lower half interface	2015-02-13 13:56:22 -06:00
Gregory Nutt	702f155fd0	STM32 RTC driver lower half: Implement the settime method of the RTC interface	2015-02-13 13:36:15 -06:00
Gregory Nutt	b0b6747d49	Break out a new internal interface, stm32_rtc_setdatetime(). This eliminates some un-necessary time conversions. From Freddie Chopin. ... Add a skeleton implementation of the RTC lower half interface at arch/arm/src/stm32/stm32_rtc_lowerhalf.c. This is just the framework for the RTC lower half. None of the interface methods have yet been implemetned.	2015-02-13 12:56:58 -06:00
Gregory Nutt	501bc15fbd	RTC: Remove all backdoor interfaces from rtc.h	2015-02-13 08:41:34 -06:00
Gregory Nutt	fa580e17cf	Oops... Conditioned on IPv4 wheren IPv6 was intended	2015-02-09 14:16:32 -06:00
Gregory Nutt	67f0563fad	Add logic so that STM32 Ethernet drivier can avoid interrupt level processing and, instead, execute on the work thread.	2015-02-09 08:33:29 -06:00
Gregory Nutt	b2ed249b42	STM32 SPI: Clean-up asymmetric configuration of SPI6	2015-02-07 18:59:06 -06:00
Gregory Nutt	706f01b8a2	STM32 SPI: The source clock for SPI 4,5, and 6 should be PCLK2, not PCLK1 (for F411, F427, and F429). Per David Sidrane.	2015-02-07 13:59:45 -06:00
Gregory Nutt	ee8d792737	Networking: Changes need to build ICMPv6 'router' configuration on STM32 with network debug enabled	2015-02-05 11:47:56 -06:00
Gregory Nutt	821ffc0b8a	STM32: Add an IPv6 configuration for the STM32F4-Discovery board (witht he STM32-DISCO_BB base board). Verify that the STM32 Ethernet driver works with IPv6.	2015-02-05 11:21:04 -06:00
Gregory Nutt	506c6c8512	ICMPv6: Add logic to behave like a router (if so configured): NuttX will not send the router advertisement message in response to any router solicitation messages.	2015-02-05 09:43:29 -06:00
Gregory Nutt	1646e643d7	Networking: Break out Ethernet definitions into a separate file; add IPv6 multicast addresses as common globals, Ethernet drivers need to filter link-local, all nodes Ethernet address	2015-02-04 14:51:20 -06:00
Gregory Nutt	f036df9faa	Minor update to Kconfig file selections	2015-02-04 08:21:32 -06:00
Gregory Nutt	011c6e0c7e	Re-arrange condition logic from the last change to avoid having STM32-specific conditional logic outside of the STM32 sandbox.	2015-02-04 07:24:19 -06:00
Gregory Nutt	2393a074e5	STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>	2015-02-04 06:49:05 -06:00
Gregory Nutt	523b12c624	Recent changes to stm32_rtcc.c do not compile with STM32L15XX configurations. From Jussi Kivilinna.	2015-01-27 09:20:42 -06:00
Gregory Nutt	2ce16c8fda	Disabling any of EXTI 5-9 interrupts was disabling interrupts for all EXTI 5-9. Same issue with EXTI 10-15. From Jussi Kivilinna.	2015-01-27 09:15:43 -06:00
Gregory Nutt	30b141e2c8	Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless	2015-01-24 06:49:51 -06:00
Gregory Nutt	e8f266001d	Add CONFIG_STACK_COLORATION that does the same thing as CONFIG_DEBUG_STACK but without enabling debug. From David Sidrane	2015-01-24 06:03:39 -06:00
Gregory Nutt	b3db229b77	STM32 Ethernet: Port IPv6 address filtering from the Tiva TM4C driver	2015-01-21 15:04:39 -06:00
Gregory Nutt	9588b0e7a7	All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called	2015-01-21 11:36:33 -06:00
Gregory Nutt	723b7fc430	Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address.	2015-01-20 15:52:25 -06:00
Gregory Nutt	f6063c3896	Networking: Add missing raw/packet socket support to all Ethernet drivers	2015-01-20 15:14:29 -06:00
Gregory Nutt	07132f462f	Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly.	2015-01-20 06:26:14 -06:00
Gregory Nutt	3aafa0b93d	nuttx/arch/arm/src/stm32/stm32_serial.c: fix declaration and definition of up_receive() and up_dma_receive() to match fields of uart_ops_s from nuttx/include/nuttx/serial/serial.h	2015-01-19 06:42:27 -06:00
Gregory Nutt	ac69e11a5f	Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received	2015-01-15 09:31:23 -06:00
Gregory Nutt	836a8b1625	- Rename devif_input() ipv4_input() ... - Copy net/devif/devif_input.c to ipv6_input.c. Remove all IPv4-specific logic. - Rename net/devif/devif_input.c to ipv4_input.c. Remove all IPv6-specific logic - Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s	2015-01-15 08:03:56 -06:00
Gregory Nutt	6bc54c3541	Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers	2015-01-15 07:07:39 -06:00
Gregory Nutt	1193b4aa55	STM32 SDIO: Don't let architectures select CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE unless they have implemented SDIOWAIT_WRCOMPLETE	2015-01-08 17:47:34 -06:00
Gregory Nutt	1ace391fcf	MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy. ... This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles. This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver. From David Sidrane	2015-01-08 06:23:42 -06:00
Gregory Nutt	a97d304d1a	STM32 RTC: Add Kconfig options needed with the preceding commit	2015-01-02 06:45:45 -06:00
Gregory Nutt	7b89f64b37	stm32-rtc: Add support for the internal low speed clock (LSI) ... Some boards do not have the external 32khz oscillator installed, for those boards we must fallback to the crummy to the crummy internal RC clock. Turn on by defining CONFIG_RTC_LSICLOCK. From Kevin Hester <kevinh@geeksville.com> via Lorenz Meier.	2015-01-02 06:32:40 -06:00
Gregory Nutt	a0727124c2	stm32: update description and code documentation. Also fixes a few code formattings. ... Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>	2014-12-29 09:59:46 -06:00
Gregory Nutt	1a27614552	stm32: fix wait upon vertical blank. This should never have occurred before. ... Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>	2014-12-29 09:48:25 -06:00
Gregory Nutt	171c017a0c	stm32: fix faulty access to non existing layer. This disables operation that requires double layer support, when configured for single layer only. ... Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>	2014-12-29 09:45:30 -06:00
Gregory Nutt	59c6f42be4	STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane	2014-12-27 18:58:18 -06:00
Gregory Nutt	d597e94332	Remove STM32-specific RX flow control logic from the upper level serial driver to the lower level STM32 serial driver	2014-12-27 09:45:45 -06:00
Gregory Nutt	405d72c1ad	Serial Upper Half: Add watermarks to RX flow control logic	2014-12-27 07:43:06 -06:00
Gregory Nutt	214183ff93	STM32: Fix some incorrectly placed conditional logic	2014-12-26 12:41:35 -06:00
Gregory Nutt	570943bd71	STM32 I2C: Add strings to decode trace events. From David Sidrane	2014-12-26 08:35:21 -06:00
Gregory Nutt	831167f806	Add support for run time stack checking for the STM32. From David Sidrane	2014-12-26 08:30:42 -06:00
Gregory Nutt	16a302e732	STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review	2014-12-19 14:52:17 -06:00
Gregory Nutt	44d72c6545	stm32: Add configuration option for ltdc ... This adds the following ltdc configuration options: - dither support - cmap support, is this the right place for CONFIG_FB_CMAP? - support for extended ltdc interface Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>	2014-12-19 13:58:39 -06:00
Gregory Nutt	193edfb7be	stm32: implements ltdc frambuffer and support for ltdc layer operation ... This implements the framebuffer support for the generic nuttx framebuffer interface, (see nuttx/video/fb.h) This also implements the interface to perform hardware accelerated layer operation by the ltdc controller and dma2d controller later (see nuttx/video/ltdc.h). The following methods are supported by the ltdc interface: - getvideoinfo Get video information of the layer - getplaneinfo Get plane information of the layer - getlid Handle specific layer identifier. This allows to detect to current layer state (e.g. important for layer flipping) - setclut Set the layer color lookup table. Up to 256 color entries supported. - getclut Get the layer color lookup table - setcolor Set the default layer color. In the context of the ltdc layer this means set the default color outside the active area or if the layer is disabled. - getcolor Get the default layer color - setcolorkey Set the layer colorkey (chromakey). Colorkey is enabled by blendmode LTDC_BLEND_COLORKEY - getcolorkey Get the layer colorkey - setalpha Set the constant alpha value. If blend mode LTDC_BLEND_SRCPIXELALPHA or LTDC_BLEND_DESTPIXELALPHA is defined than the blended color is calculated by the formel: Cdest = Pixelalpha * Constalpha * Csrc. Otherwise: Cest = Constalpha * Csrc - getalpha get the alpha value - setblendmode Set the layer blendmode. Supported blendmodes: non blendmode (do not perform blend operation independent on the layers alpha and colorkey) alpha alpha blending (transparency) destpixelalpha use pixel alpha value for the top layer (Layer2) srcpixelalpha use pixel alpha value for the subjacent layer (Layer1) colorkey enable colorkey - getblendmode Get the layer blendmode - setarea Set the active layer area, the visible rectangle inside the whole layer. This also allows to change the position of the whole layer which is visible in the selected area independent on the area position. - getarea Get the active layer area - update Reload the layer shadow register and make changes visible. Also supports layer flipping. Note! Dithering and background color are static parameter and can only changed at build time. Implementation details: The implementation of ltdc interface was inspired by SDL and DirectFB. All layer settings are shadowed before they become active (except setclut). They are still inactive until the layer is updated. This is done by the update method. Should clut only active after an update or not? Clut is used for drawing while the other settings usually used for blend or blit operations. So i think this should be the right way. The implementation of ltdc interface was inspired by SDL and DirectFB. All layer settings shadowed before they become active (except clut). They are still inactive until the layer is updated. This is done by the update call. Should clut only activated after an update or not? Clut is used for draw operation while the other settings usually used for blend or blit operations. So i think this should be the right way. Deviations from the ltdc hardware implementation: - Shadow register update of both layer (Layer1 or Layer2) is independent as long LTDC_UPDATE_SIM is not set. This flag allows to update both layer simultaneous. Otherwise only the desired layer is updated. Layer operation: Keep in mind, both layer are allways active (of course if both enabled by the configuration). First the Layer 1 is blended with the background color and the result is blended with the Layer2. To avoid blend effects, set the Layer2 in non blend mode. This is equal to blend with alpha = 255. Enable blending of Layer2 with the background color by enable blending of Layer1 and disable the opacity by setting the alpha value to 0. Layer flip: A layer flip usual mean swapping two framebuffer. So the current inactive buffer can refreshed with data while the active framebuffer is visible. A flip operation changes the inactive layer to the active one and vice versa. The ltdc implementation supports layer flip. This can be done by the update call and the flag LTDC_UPDATE_FLIP. In this case ltdc makes the inactive layer invisible. In detail, the inactive layer is disabled and the blendmode reset. Detection of the current layer state (e.g. active or inactive) is supported by the getlid method combined with one of the LTDC_LAYER_* flags. Maybe an additional method "flip" for flip operation should be added to the ltdc interface? But this make no sence from my view if the layer is a non LTDC layer, e.g. playing with dma2d only. Supported and tested nuttx pixel formats: Single Layer without LTDC interface support: - FB_FMT_RGB8 (cmap support required) - FB_FMT_RGB16_565 - FB_FMT_RGB24 Single Layer with LTDC interface support: - FB_FMT_RGB8 (cmap support required) - FB_FMT_RGB16_565 - FB_FMT_RGB24 Dual Layer with LTDC interface support: - FB_FMT_RGB8 (cmap support required) - FB_FMT_RGB16_565 - FB_FMT_RGB24 Why is FB_FMT_ARGB8888 missing? Changes: - Remove unused register debug method. Todo: - Add support for backlight, currently not neccessary Did i forgot something? Take a look in the ltdc example or the interface description (see nuttx/include/video/ltdc.h). Thanks to Ken for the base layout. ;) Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>	2014-12-19 13:48:53 -06:00
Gregory Nutt	83d87e5ef7	stm32: Add infrastructure for dma2d support ... Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>	2014-12-19 13:41:08 -06:00
Gregory Nutt	060a61dfac	stm32: Add common stm32 layer description. This defines a common layer description for the ltdc and dma2d controller. ... Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>	2014-12-19 13:37:08 -06:00
Gregory Nutt	df31cf1db8	stm32: configure PLLSAI clock to enable ltdc register access ... Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>	2014-12-19 13:30:58 -06:00
Gregory Nutt	3385fe60cf	stm32: Add missing clut register definition ... Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>	2014-12-19 13:28:42 -06:00
Gregory Nutt	e9074c8a44	stm32: rename CFBLR register name to the name used in the reference manual ... Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>	2014-12-19 13:26:04 -06:00
Gregory Nutt	f181dcef29	stm32: rename PLLSAI register name to this one in the reference manual ... Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>	2014-12-19 13:21:39 -06:00
Gregory Nutt	f284c5cab2	Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg()	2014-12-16 09:54:32 -06:00
Gregory Nutt	a574a3cc8a	STM32 LTDC: Fix a typo in conditional compilation	2014-12-13 07:45:42 -06:00
Gregory Nutt	f8592281a7	STM32 OTG HS DEV (in FS mode): Disable ULPI clock enable in RCC AHB1 Register. If Both ULPI and the FS clock enable bits are set in FS mode, then the ARM never awakens froom WFI due to a chip issue. From Ken Pettit	2014-12-13 07:44:13 -06:00
Gregory Nutt	dd3d417aed	STM32 OTGHS Device: Fix for OTGHS core working in FS mode. From Ken Pettit	2014-12-12 07:43:32 -06:00
Gregory Nutt	cb9e3c2bb9	Set the GPIO_SPEED_50MHz on all F2 and F4 SPI pin configurations. This is based on an F411 SPI1 errata but the fixed is generalized to all SPI and all F2 and F4 (let me know if this introduces any other issues). Discovered and fixed by Sebastien Lorquet after much consternation.	2014-12-08 09:51:52 -06:00
Gregory Nutt	6d7106424e	STM32: Add MCO configuration for the STM32L1xx. From Jussi Kivilinna	2014-12-02 10:19:37 -06:00
Gregory Nutt	13de352dcd	STM32L15: Fix typo in MCO pin definition. From Jussi Kivilinna	2014-12-02 10:18:02 -06:00
Gregory Nutt	f94052de26	Update comments	2014-11-29 15:28:28 -06:00
Gregory Nutt	eace825e3b	STM32 F4 I2C: Port Tridge's I2C noise resiliance logic from the PX4 repository.	2014-11-29 13:37:45 -06:00
Gregory Nutt	0d50608eae	Fix one warning. There are a couple of others that look like real problems	2014-11-28 11:49:24 -06:00
Gregory Nutt	3d55cd82ee	Forgot too add file before last commit	2014-11-27 06:14:09 -06:00
Gregory Nutt	0ad88d9664	Enable support for STM32F102. https://github.com/PX4/NuttX/pull/28.diff	2014-11-27 06:12:35 -06:00
Gregory Nutt	727a7c9e40	Fixes for more issues found by cppcheck	2014-11-24 17:00:26 -06:00
Gregory Nutt	184ebdf191	STM32 F4 OTGHS device controller driver from Brennan Ashton	2014-11-20 07:19:04 -06:00
Gregory Nutt	2330c9c842	Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers	2014-11-16 08:10:06 -06:00
Gregory Nutt	bf984b2b3a	Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday	2014-11-15 08:22:51 -06:00
Gregory Nutt	e69e2767ad	Correct a typo in the STM32 OTGFS register bit definitions	2014-11-13 10:43:54 -06:00
Gregory Nutt	dc16ffe11a	Fix a typo in an I2C header file. From Jahu Niskanen	2014-11-11 07:12:16 -06:00
Gregory Nutt	c65372b80c	Support for the STM32F103RG. From Murilo Ponte	2014-11-10 07:48:46 -06:00
Gregory Nutt	5ebc472f43	STM32 Serial: Don't compile up_earlyserialinit() if USE_EARLYSERIALINIT is not define. Otherwise, a macro definition clobbers the function definition	2014-10-28 06:58:37 -06:00
Gregory Nutt	60d2547cd7	Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS	2014-10-27 11:31:16 -06:00
Gregory Nutt	800826ac64	Add framework for EFM32 DMA support -- no logic in place yet	2014-10-24 17:59:13 -06:00
Gregory Nutt	2763da5ddd	EFM32: Add IDLE power management hooks. Nothing implemented; just define the hooks	2014-10-22 07:26:31 -06:00
Gregory Nutt	94270a0229	Add ADC pinmap definitions for the STM32 F103R from Lederhilger Martin	2014-10-21 06:48:16 -06:00
Gregory Nutt	d2cf8395f9	stm32: rename spi frame format definition ... This renames the stm32 spi frame format definition to the short description name as well as the other cr2 register flags. Note! STM32_SPI3_FRF was never used by nuttx somewhere Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>	2014-10-20 15:12:59 -06:00
Gregory Nutt	0aea891272	Enable selection of SPI2 for STM32L15XX in Kconfig. From Jussi Kivilinna	2014-10-16 07:03:23 -06:00
Gregory Nutt	26b42e3f57	Minor update to last Kconfig change	2014-10-15 12:33:37 -06:00
Gregory Nutt	e73b64f5ea	Add Kconfig selections for STM32-F4x1RE SPI peripheral	2014-10-15 12:22:04 -06:00
Gregory Nutt	a835387529	Fix file mode on modified files	2014-10-14 15:45:56 -06:00
Gregory Nutt	56841b9e20	Support for the STM32 F411RE from Serg Podtynnyi	2014-10-14 15:42:28 -06:00
Gregory Nutt	7012d13e95	Cosmetic changes to comments	2014-10-10 16:54:47 -06:00
Gregory Nutt	85c75a39b0	Fix a few typos	2014-10-10 11:41:40 -06:00
Gregory Nutt	abc90f0e50	Fix watchdog stop bit usage. From Lazlo	2014-10-10 11:36:50 -06:00
Gregory Nutt	1b1daeb7ef	Correct STM32 RTC EXTI bit definition. From Lazlo	2014-10-09 06:25:07 -06:00
Gregory Nutt	db9901e2f9	Update everything under nuttx/arch to use the corrected syslog interfaces	2014-10-08 12:48:47 -06:00
Gregory Nutt	6ab29cbef9	Remove non-functional vestiges of OTGHS in FS mode (including OTGFS2); try to convert the stm32f429i-disco configuration to use OTGHS instead of OTFHS in FS mode (OTGFS2). But I don't have the boards and can't test	2014-10-07 15:25:31 -06:00
Gregory Nutt	6023219078	Integrates OTGHS support into the STM32; Eliminates the older OTGHS in FS mode logic. From Brennan Ashton	2014-10-07 15:05:30 -06:00
Gregory Nutt	362736b377	Add files that implement true high speed support for the STM32 OTGHS peripheral. From Brennan Ashton	2014-10-07 15:01:42 -06:00
Gregory Nutt	7e9c8b5926	STM32 CAN correction suggested by Max Holtzberg	2014-09-24 08:23:05 -06:00
Gregory Nutt	238e18cc0a	Move include/nuttx/mm.h to include/nuttx/mm/mm.h	2014-09-24 07:29:09 -06:00
Gregory Nutt	1ca6adadfa	More naming changes to get the stm3240g-eval/nxterm configuration building again	2014-09-20 15:53:28 -06:00
Gregory Nutt	52a1f19023	Fixes to avoid some hang conditions using STM32 CAN	2014-09-17 08:35:03 -06:00
Gregory Nutt	442d2adb7a	Fix for UART7 and UART8 on STM32 clock enable from Aton	2014-09-11 10:27:40 -06:00
Gregory Nutt	31b8137956	There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.	2014-09-01 15:39:34 -06:00
Gregory Nutt	ec086adfae	Reanem kzalloc to kmm_zalloc for consistency	2014-08-31 17:34:44 -06:00
Gregory Nutt	10ca085b09	Rename kmalloc to kmm_malloc for consistency	2014-08-31 17:26:36 -06:00
Gregory Nutt	fcd7b9336e	Rename kfree to kmm_free for consistency with other naming conventions	2014-08-31 17:04:02 -06:00
Gregory Nutt	10aa9ad087	Remove CONFIG_MM_MULTIHEAP. Non-multiheap operation is no longer supported	2014-08-31 10:54:55 -06:00
Gregory Nutt	729bc9f9a7	Various changes/fixes to get configs/stm32f4discovery/kostest working after the big configuration renaming (and after a long period of bit rot)	2014-08-29 16:23:46 -06:00
Gregory Nutt	e11679acf8	Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL	2014-08-29 14:47:22 -06:00
Gregory Nutt	9be4972862	STM32 FLASH fixes: use size_t instead of uint16_t, make interface more generic. From Freddie Chopin	2014-08-28 09:11:20 -06:00
Gregory Nutt	01566dd322	STM32 serial: MAke uart_devs[] const. From Freddie Chopin	2014-08-22 16:20:52 -06:00
Gregory Nutt	52b3735310	Recent STM32 UART change: Wasn't that logic backward? Shouldn't that have been disable the USART if (1) we don't have than many USARTs OR (2) we don't have that particular USART -- not AND.	2014-08-22 16:16:23 -06:00
Gregory Nutt	033de28cfa	STM32 F401: Correct support for USART6 on this chip. From Freddie Chopin	2014-08-22 06:49:16 -06:00
Gregory Nutt	2bc16b2ba5	wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.	2014-08-21 11:16:55 -06:00
Gregory Nutt	754541a381	Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires	2014-08-17 16:51:56 -06:00
Gregory Nutt	2fab4eaa5a	In order to get PHY interrupts, they must be enabled at the PHY (still don't get PHY interrupts)	2014-08-17 13:03:18 -06:00
Gregory Nutt	4c90c03028	Use the device name assigned by the registration process, not our best guess	2014-08-16 15:14:39 -06:00
Gregory Nutt	8f6f564971	More of the PHY event notification logic change: Fix some compile errors when full feature is enabled; Add some missing ioctol logic	2014-08-16 15:04:09 -06:00
Gregory Nutt	85070e057e	Modified to support the change to the network ioctl signature changes. Also add support for new ioctl to setup PHY event notifications.	2014-08-16 14:08:58 -06:00
Gregory Nutt	6455f60c60	Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures	2014-08-08 18:39:28 -06:00
Gregory Nutt	4dc151097e	Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h	2014-08-08 17:53:55 -06:00
Gregory Nutt	1c99d53bb1	Move clock functions from sched/ to sched/clock	2014-08-08 14:43:02 -06:00
Gregory Nutt	39183d37b8	Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors	2014-08-07 18:00:38 -06:00
Gregory Nutt	594083d870	Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined.	2014-08-06 16:26:01 -06:00
Gregory Nutt	d57c3b4e82	Update ChangeLog	2014-07-22 07:25:01 -06:00
Gregory Nutt	45c03e5a1a	STM32 OTGFS device: Various changes to try to reduce that amount of time in interrupts handles and with interrupts disbled. Needs verification on other platforms. From Petteri Aimonen	2014-07-22 07:23:17 -06:00
Gregory Nutt	615b7d6c7a	Fix typos in the STM32 DAC header file. From Petteri Aimonen	2014-07-22 07:13:33 -06:00
Gregory Nutt	d7fe256821	NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed.	2014-07-04 19:13:08 -06:00
Gregory Nutt	99ce3a44d7	Remove all inclusion of uip.h	2014-07-04 16:58:22 -06:00
Gregory Nutt	11e3a21411	NET: More renaming	2014-07-04 15:40:49 -06:00
Gregory Nutt	68f83f973e	CCM PROCFS: Changed the configuration a bit. I am still not happy about the coupling between procfs, mtd, and now STM32	2014-07-03 08:50:24 -06:00
Gregory Nutt	954048b8e9	Add STM32 CCM heep procfs	2014-07-03 08:18:24 -06:00
Gregory Nutt	313982ba18	NET: Rename XYZ_uiptxpoll to just XYZ_txpoll	2014-07-01 18:41:08 -06:00
Gregory Nutt	621ec21bfd	Rename uip_poll->devif_poll and uip_timer->devif_timer	2014-06-30 18:40:41 -06:00
Gregory Nutt	ade8807a61	Rename uip_input to devif_input	2014-06-30 18:11:17 -06:00
Gregory Nutt	3010eddf11	STM32: Add configuration support fort he STM32F103RC. From Kosma Moczek	2014-06-30 08:16:17 -06:00
Gregory Nutt	ed02593af7	STM32: Reorder MCUs in choice menu; remove duplicates. From Kosma Moczek	2014-06-30 08:13:12 -06:00
Gregory Nutt	48e6f0ba78	STM32: Move temperature ranges from chip selection configuration prompts. From Kosma Moczek	2014-06-30 08:09:19 -06:00
Gregory Nutt	bfff6190d0	Unconfigure GPIO pins when closing a serial port to prevent back effects from back-powering on the TX pin. From Kosma Moczek	2014-06-30 08:02:26 -06:00
Gregory Nutt	a095b1b260	Make variable definitions 'static const' when possible to save RAM usage. From Kosma Moczek	2014-06-30 07:39:51 -06:00
Gregory Nutt	e4990dda4d	Rename uip_driver_s net_driver_s	2014-06-27 16:48:12 -06:00
Gregory Nutt	f8e5e82402	Add support for a network device IOCTL to access PHY registers. Ioctls only implemented for STM32. From Lazlo	2014-06-27 09:30:41 -06:00
Gregory Nutt	fd7b06c68e	STM32 I2C reset. Add missing GPIO configuration. From Alex D	2014-06-25 16:08:31 -06:00
Gregory Nutt	ff97ad1245	Clean-up packet socket naming	2014-06-25 10:34:52 -06:00
Gregory Nutt	57383ea2f3	Rename ip_eth_hdr to eth_hdr_s	2014-06-25 09:57:52 -06:00
Gregory Nutt	11896e1481	Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h	2014-06-24 10:14:15 -06:00
Gregory Nutt	b34a1f1e01	Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h	2014-06-24 09:28:44 -06:00
Gregory Nutt	a2cb59cab8	First check-in of Lazlo's PF_PACKET 'raw' socket implementation	2014-06-12 11:52:06 -06:00
Gregory Nutt	a23245781a	STM32: Handle setting of USART CR1_M when 8 bits of data plus parity	2014-06-11 15:49:54 -06:00
Gregory Nutt	348e666278	STM32: Expicitly include header file files. From Freddie Chopin	2014-06-10 15:49:48 -06:00
Gregory Nutt	407e72b300	Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_	2014-05-30 12:13:06 -06:00
Gregory Nutt	b3abd30a76	Cosmetic changes	2014-05-28 14:09:58 -06:00
Gregory Nutt	3feabec7d5	STM32 RTC: Add retry to initialization logic. Sometime RTC initialization takes longer. From dlsitzer.	2014-05-27 07:10:53 -06:00
Gregory Nutt	c68f9477cf	Back out PX4 fixes that were reverted in PX4 repository	2014-05-25 07:53:00 -06:00
Gregory Nutt	5d3479bbec	STM32 I2C: Final fixes from Max Kriegleder et al.	2014-05-23 08:42:14 -06:00
Gregory Nutt	bac1ab9a34	Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith	2014-05-20 17:48:39 -06:00
Gregory Nutt	d2e1d8f6ee	STM32 lowputc: Fix an error in conditional compilation. From Sami Pelkonen	2014-05-20 08:12:07 -06:00
Gregory Nutt	947f31f5a9	SAM4E-EK: Ooops.. two touchscreen drivers(?)	2014-05-14 10:56:03 -06:00
Gregory Nutt	5258e8d9e7	Fix one error that I made in the last check-in (there are probably more)	2014-05-14 08:09:08 -06:00
Gregory Nutt	fb774d677c	Add an alternate STM32 I2C driver that works around errata in the F103 chip (and maybe others). From Patrizio Simona	2014-05-14 07:48:47 -06:00
Gregory Nutt	5d35f07278	STM32 I2C: Cosmetic changes in preparation to merge a change	2014-05-13 13:11:10 -06:00
Gregory Nutt	d9a20861a6	Updated README and comments	2014-05-10 11:36:20 -06:00
Gregory Nutt	fa7c79712e	STM32 I2C: Bring in PX4 fix for I2C in very high noise environments or with rogue perpipherals. Taken from the PX4 commit by Tridge	2014-05-10 10:34:05 -06:00
Gregory Nutt	308d0dbe06	Couple of fixes for the latest STM32 additions / modifications. These are simple fixes dealing with conditional compile based on CONFIG items not being set. From Ken Pettit	2014-05-09 06:41:01 -06:00
Gregory Nutt	02bb1d69b8	Add support for the STM32152 and STM32162 Medium+ density parts (plus miscellaneous other improvements to the original STM32151 logic). From Jussi Kivilinna and Sami Pelkonen	2014-05-08 09:20:11 -06:00
Gregory Nutt	af2bb81ac2	Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna	2014-05-08 09:00:33 -06:00
Gregory Nutt	1cc859405e	STM32: Rename pinmap.h files to better reflect the chip naming conventions	2014-05-07 13:05:12 -06:00
Gregory Nutt	6e9df4d5ab	STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent	2014-05-07 12:54:27 -06:00
Gregory Nutt	a1871c7045	STM32: Add more complication to STM32 Kconfig so the correct RNG and ETHMAC options presented for the F401RE. There are still invalid peripheral options being presented	2014-05-06 11:35:13 -06:00
Gregory Nutt	ca31e38f7b	Nucleo-F401RE: With these changes and the changes from previous commits, the basic Nucleo-F401RE NSH configuration is working.	2014-05-06 11:07:10 -06:00
Gregory Nutt	acd40e73aa	The Nucleo-F401RE has no on-board cystal and, hence, must use the on-chip HSI oscillator for the PLL include clock	2014-05-06 10:01:02 -06:00
Gregory Nutt	bfa9df89e2	STM32: Add more complication to STM32 Kconfig so the correct ADC and CAN options presented for the F401RE. There are still invalid peripheral options being presented	2014-05-06 08:32:21 -06:00
Gregory Nutt	27d3a4962a	STM32: Add some complication to STM32 Kconfig so the correct USART and TIM options are presented for the F401RE. There are still invalid peripheral options being presented	2014-05-05 17:59:07 -06:00
Gregory Nutt	449ad68fa1	Correct some typos in STM32 RCC header files noted by Ramtin Amin	2014-05-05 07:23:26 -06:00
Gregory Nutt	42432ab1d0	STM32 F401 has no CCM memory	2014-04-30 16:49:39 -06:00
Gregory Nutt	d7b261eb46	Fix configuration for F401: It has has FSMC and so the option should not be offered. But there are many more options available for the F401 that should be availalbe: CAN, nonexistent timers, etc. These will all need to be addressed	2014-04-30 16:12:36 -06:00
Gregory Nutt	8be212ccc3	Nucleo-F401RE: Fix memory usage	2014-04-30 08:20:30 -06:00
Gregory Nutt	de7136e69b	STM32: More places where up_prioritize_irq is called when CONFIG_ARCH_IRQPRIO is not defined. Sourceforge ticket #26	2014-04-28 07:07:47 -06:00
Gregory Nutt	1745e978fb	Sourceforge ticket #26: STM32 up_prioritize_irq should not be called if CONFIG_ARCH_IRQPRIO is not defined	2014-04-25 16:23:00 -06:00
Gregory Nutt	0bf091f2a0	STM32 dmapreflight method must be conditioned on CONFIG_SDIO_PREFLIGHT. From Pelle Windestam	2014-04-25 07:22:14 -06:00
Gregory Nutt	9bd0102aae	Nucleo F401RE: Remove PX4 cruft that can in with the port	2014-04-22 12:18:08 -06:00
Gregory Nutt	162662a290	Add support for the STM32F041RE and for the Nucleo-F401RE board. From Frank Bennett	2014-04-20 13:42:23 -06:00
Gregory Nutt	235de5c573	ST32: Make selection of SDIO interrupt priority essentially impossible	2014-04-19 08:05:49 -06:00
Gregory Nutt	a61c58d50a	STM32 OTGFS Host: If OTGFS_HCCHAR_ODDFRM is not goint to be set, then it should be cleared	2014-04-17 11:16:58 -06:00
Gregory Nutt	6492446ac8	STM32 OTGFS Host: Changes from Leo for low-speed devices and interrupt endpoints	2014-04-17 10:52:27 -06:00
Gregory Nutt	edc022ff1a	Costmetic: Replace spaces with tabs	2014-04-16 16:26:46 -06:00
Gregory Nutt	cb802b02e1	STM32 OTGFS Host: Additional trace points from Leo	2014-04-16 12:56:21 -06:00
Gregory Nutt	b4f11306d3	STM32 F2: Fix SPI2 MOSI pin mapping. From dlsitzer	2014-04-16 12:35:33 -06:00
Gregory Nutt	e26466e6e4	Updates to the STM32 OTGFS host logic from Leo	2014-04-15 08:49:33 -06:00
Gregory Nutt	d4fc5ec41c	examples/touchscreen: Add a configuration option to indicate that there is or is not an architecture-specific initialization function	2014-04-14 12:26:49 -06:00
Gregory Nutt	25d4ff745b	More trailing whilespace removal	2014-04-13 16:22:22 -06:00
Gregory Nutt	c708eff608	Make sure that there is one space after for	2014-04-12 13:28:22 -06:00
Gregory Nutt	33d5d24964	Make sure that there is one space between while and condition	2014-04-12 13:09:48 -06:00
Gregory Nutt	eee82879cb	Make sure that there is one space between if and condition	2014-04-12 12:53:19 -06:00
Gregory Nutt	65c6c071ff	STM32 OTF FS host: Use of OTGFX_VTRACEn_ macros must match use of usbhost_tracen() interface	2014-04-12 10:09:37 -06:00
Gregory Nutt	bc144ad5d0	STM32 OTG FS Hose and others: Remove some warnings	2014-04-12 09:58:23 -06:00
Gregory Nutt	7bf7d8ebf6	STM32 OTGFS Host: Fix a logic error introduced in the last check-in	2014-04-12 09:33:52 -06:00
Gregory Nutt	aefb741a6a	STM32 OTGFS: Host USB tracing instrumentation added by Leo	2014-04-12 08:44:22 -06:00
Gregory Nutt	eddfa4222f	STM32 EMAC: Add support for IGMP hash table update. From Manuel Stühn	2014-03-24 09:32:48 -06:00
Gregory Nutt	c99476c950	configs/stm32f4discovery/pm: Configuration converted to use the kconfig-frontends tools	2014-03-04 08:58:01 -06:00
Gregory Nutt	c8757cb0e6	STM32 Timer: Set CCMR wehn selecting timer channel. From David Sidrane	2014-02-18 13:50:46 -06:00
Gregory Nutt	a916f2a008	STM32 SPI: Disable SPI before modifying CR1	2014-02-18 13:42:20 -06:00
Gregory Nutt	0c19cc2c13	More STM32F429 Discovery FPU-related changes from David Alessio	2014-02-18 12:07:17 -06:00
Gregory Nutt	4ea8d21fcc	STM32 serial: Fix clone typo.. FLOWCONROL vs FLOWCONTROL	2014-02-14 09:09:56 -06:00
Gregory Nutt	b3792fcd86	Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced	2014-02-10 18:08:49 -06:00
Gregory Nutt	a26b03d0d0	rename up_led*() functions to board_led_*()	2014-01-24 14:28:49 -06:00
Gregory Nutt	1061e67f14	Fix error in last ARMv7-M up_disable_irq checkin	2014-01-15 15:26:32 -06:00
Gregory Nutt	e43f86071d	Fix all Cortex-M3/4 implementations of up_disable_irq(). They were doing nothing. Thanks to Manuel Stühn for the tip.	2014-01-15 09:56:30 -06:00
Gregory Nutt	4de5e40669	Individual IRQs are not longer disabled on each interrupt. See ChangeLog for detailed explanation	2014-01-15 08:09:19 -06:00
Gregory Nutt	dd4e64d9f3	Changes to get PX4 config to build. Also some warning removal	2014-01-14 13:30:22 -06:00
Gregory Nutt	b4a577a49e	Add support for the XPT2046 touchscreen controller on the Viewtool LCD module	2014-01-09 10:57:17 -06:00
Gregory Nutt	162e240ed3	Fix STM32F103VE SPI3 definitions; Fix bug introduced in recent NX reorganization. From Steve Redler IV	2014-01-08 16:44:11 -06:00
Gregory Nutt	e83bd3e961	Viewtools STM32F103: Add SSD1289 LCD support	2014-01-05 14:14:59 -06:00
Gregory Nutt	b1d61b4e82	STM32: Single wire UART support from Thomas Grubler	2014-01-02 07:56:46 -06:00
Gregory Nutt	543c16de75	Fix naming of STM32 F3 SPI2 MOSI and MISO pins. From Brian Webb	2013-12-27 11:15:18 -06:00
Gregory Nutt	2d92d7825d	STM32F107 OTG FS clock presecaler cannot be configurated after the USB clock is enabled	2013-12-26 10:45:21 -06:00
Gregory Nutt	515fad9616	Add support for STM32F107 OTG FS (doesn't work) and update USB support for Viewtools STM32F107~	2013-12-26 09:22:37 -06:00
Gregory Nutt	8660aed4a9	F103VC, F105, and F107: Fix configuration and building of USB. configs/viewtools-stm32f107: Fix build for F103 and F107: F103 has USB device; F107 has OTGFS	2013-12-25 18:34:15 -06:00
Gregory Nutt	4100de6648	Fix a duplicate label introduce in recent commit	2013-12-23 14:29:25 -06:00
Gregory Nutt	9c2c1e8589	Need to protect state on stack to do nested interrupt handling	2013-12-23 14:11:32 -06:00
Gregory Nutt	29c43b0b24	Fixes a few more high priority, nested interrupt logic	2013-12-23 11:13:56 -06:00
Gregory Nutt	1705b3f894	Fix some missing parameters in macros	2013-12-22 16:29:36 -06:00
Gregory Nutt	e73291a8ea	Finish the high priority, nested interrupt handler test (does not work)	2013-12-22 13:23:57 -06:00
Gregory Nutt	eaed4c04a2	Finishes coding of ARMv7-M high priority nested interrupt logic. Still undocumented; still not fully tested	2013-12-21 15:05:48 -06:00
Gregory Nutt	3855ce04e8	Beginning of high priority nested interrupt support for the ARMv7-M family	2013-12-21 11:03:38 -06:00
Gregory Nutt	f3198d5812	Cosmetic: Changlog and update to comments	2013-12-20 16:24:22 -06:00
Gregory Nutt	b4144e21d6	Move include/nuttx/fb.h to include/nuttx/video/fb.h	2013-12-10 09:23:54 -06:00
Gregory Nutt	d01808c603	LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks	2013-12-05 10:37:55 -06:00
Gregory Nutt	cdaa0b9671	ViewTool STM32F107: Basic NSH checks out okay	2013-12-01 10:05:40 -06:00
Gregory Nutt	ec3397dde6	STM32 F4: Add support for GPIOK and GPIOJ. From Ken Pettit	2013-11-28 08:13:59 -06:00
Gregory Nutt	2036f600d7	STM32 CAN: Options for TSEG1 and TSEG2 quanta missing from Kconfig file	2013-11-14 08:29:36 -06:00
Gregory Nutt	5032829f9a	STM32F429 LTDC header files and framebuffer driver framework from Ken Pettit	2013-11-11 14:05:29 -06:00
Gregory Nutt	fe800abc58	STM32 OTG FS device and host drivers extended so that they can support either the OTG FS peripheral or the OTG HS peripheral (in FS mode). This was done as a quick way to get USB support on the STM32F429 which has only OTG HS. From Ken Pettit	2013-11-10 07:23:06 -06:00
Gregory Nutt	38b981e50c	Back out a small part of the recent STM32 usbdev fix. From David Sidrane	2013-11-07 19:07:16 -06:00
Gregory Nutt	3e2240331d	STM32 F1 USB: Fix OUT SETUP command bug. From David Sidrane	2013-11-07 17:25:05 -06:00
Gregory Nutt	893f36c061	Support for the STM32F429 from Ken Pettit	2013-11-07 16:47:43 -06:00
Gregory Nutt	231a43bd8d	SAMA5 PWM: Driver now in build and configuration system	2013-11-06 12:24:51 -06:00
Gregory Nutt	6be2a979ef	STM32 F1 USB device: Fix handling of EP0 start for large buffers; Add support for decoded USB trace strings. From Davice Sidrane	2013-11-05 08:56:06 -06:00
Gregory Nutt	a652c6fe42	Fixing typos from previous check-ins. Also, missed the ARMv7 IDLE stack coloration	2013-11-01 16:06:43 -06:00
Gregory Nutt	04de5c4452	Port IDLE/interrupt stack coloration to ARM and ARMv7-A architectures	2013-11-01 15:30:18 -06:00
Gregory Nutt	b8085906b9	Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane	2013-11-01 11:16:51 -06:00
Gregory Nutt	cfcd3cc74b	arch/arm/src/stm32/stm32_usbdev.c: On a failure to bind the class driver, the driver reference was being nullified too soon. This caused an exception in usbdev_reset() later. The driver reference will be null ... ified later usbdev_unregister when the caller gets the error. From David Sidrane	2013-10-31 15:27:52 -06:00
Gregory Nutt	848349bbd7	STM32 SPI DMA: Fix related to CONFIG_STM32_DMACAPABLE from Ken Pettit	2013-10-27 16:23:44 -06:00
Gregory Nutt	9f5b9c20fe	STM32 PWM and ADC: Add some bits that should have been cleared. From Martin Lederhilger	2013-10-24 08:27:09 -06:00
Gregory Nutt	eb648c585b	Add support for the STM32F207ZE chip. From Martin Lederhilger	2013-10-24 08:25:05 -06:00
Gregory Nutt	7692af99b6	STM32 F1 DAM fix from David Sidrane	2013-10-23 14:05:26 -06:00
Gregory Nutt	b661ba3e2a	STM32 DMA Priority: Select the correct default for F1 and other family members	2013-10-18 14:13:53 -06:00
Gregory Nutt	5c3f7f118c	Add SDIO preflight method	2013-10-18 08:15:09 -06:00
Gregory Nutt	fd468d219f	Changes to stm32_dmacapable interfaces from Mike Smith	2013-10-18 08:06:23 -06:00
Gregory Nutt	0c44715f07	STM32 DMA priority corrections from Mike Smith	2013-10-18 07:37:24 -06:00
Gregory Nutt	cda1fd00c7	Typo fixes for UART7 and UART8 DMA configs. From Mike Smith	2013-10-18 07:17:55 -06:00
Gregory Nutt	8924101566	STM32 F103C: Correct some errors in pinmapping. From David Sidrane	2013-10-16 07:26:41 -06:00
Gregory Nutt	b885459624	Add framework for Spark Core board support. The initial commit is a clone of the Maple Mini and still needs Spark customizations	2013-10-02 08:24:46 -06:00
Gregory Nutt	ea4c8bbf68	Move CONFIG_NET_DUMPPACKET from LPC17 and STM32 to commong network drivers. Automatically enabled CONFIG_NETDEVICES when any Ethernet driver is enabled	2013-09-25 11:50:31 -06:00
Gregory Nutt	2c63995099	SAMA5 EMAC: Resolve issues with DUAL PHY support needed for both EMAC and GMAC peripherals. EMAC driver is now code complete and builds without complaint	2013-09-17 10:55:13 -06:00
Gregory Nutt	64825db9c2	STM32: Support for the LeafLabs Maple and Maple Mini boards. From Librae	2013-09-13 12:45:33 -06:00
Gregory Nutt	e31f62e1b5	STM32 Kconfig: Fix STM32 UART7/8 kconfig names and UART DMA. Provided by Lorenz Meier	2013-09-13 11:45:32 -06:00
Gregory Nutt	1b17b8fbea	Make filter register accessible for CAN1 and CAN2. Provided by Lorenz Meier	2013-09-13 11:20:10 -06:00
Gregory Nutt	f2a5c43b25	SAMA5: Framework for a TWI driver (incomplete)	2013-09-11 12:28:52 -06:00
Gregory Nutt	928d0ddd8a	STM32 Timer Register Bit Definitions: Some CCER bit settings changed per SourceForge bug #18 submitted by CCCTSAO	2013-09-02 08:01:09 -06:00
Gregory Nutt	56f9092a87	Fix all occurrences of "the the" in documentation and comments	2013-08-27 09:40:19 -06:00
Gregory Nutt	56f2b3b963	Add a new method to the USB host driver interface: getdevinfo. This method will return information about the currently connected device. At present, it only returns the device speed. The speed is needed by the enumeration logic in order to set a credible initial EP0 max packet size	2013-08-26 15:46:16 -06:00
Gregory Nutt	57eb83da9d	#17 Fix if CONFIG_SDIO_BLOCKSETUP defined, OS will crash. From CCTSAO	2013-08-26 08:54:46 -06:00
Gregory Nutt	1f3cebdb40	SAMA5 EHCI: Added logic to detect port speed. Handling is insufficient	2013-08-24 07:36:05 -06:00
Gregory Nutt	3786e72947	Fix #endif with missing #if condition. Reported by Andrew Bradford	2013-08-23 16:40:30 -06:00
Gregory Nutt	e36a0e868d	SourceForge bug #16 Fix IO pin map. Add CONFIG_SERIAL_TERMIOS support. From CCTSAO	2013-08-23 11:48:53 -06:00
Gregory Nutt	07bd7c2168	STM32 F1 I2C: Fix a typo that crept in with some recent changes. From Yiran Liao	2013-08-18 07:45:14 -06:00
Gregory Nutt	ddc93e1da3	STM32 SPI: nbits interface extended to handle LSB- or MSB-first operation. From Teemu Pirinen	2013-08-16 11:35:22 -06:00
Gregory Nutt	bdbe4a4f25	Clean up some LP17xx and STM32 USB host configuration compilation errors due to the massive changes to the USB host interfaces needed to support the SAMA5	2013-08-13 17:43:19 -06:00
Gregory Nutt	8f429fd54d	SAMA5: Major restructuring of the the OHCI driver drivers to better handle the multiple root hub ports and concureent transfers on each port.	2013-08-13 16:48:14 -06:00
Gregory Nutt	34418d12bb	Separate wait() and enumerate() methods from struct usbhost_driver_s and move to new interface, struct usbhost_connection_s. This is part of the necessary restructuring of the USB host interface to support multiple root hub ports.	2013-08-13 15:03:46 -06:00
Gregory Nutt	b4645f73ec	Back out most of the changes of 3b04d08043742b9e65cf38d45988b35bff91daed	2013-08-13 14:12:27 -06:00
Gregory Nutt	f3bfd6a515	STM32 F3 fixes from John Wharington	2013-08-13 07:48:18 -06:00
Gregory Nutt	a4c195482f	More changes to USB host interface to support multiple downstream ports	2013-08-12 16:29:33 -06:00
Gregory Nutt	39696cbf96	First of several changes needed to support multiple USB host root hubs	2013-08-12 14:44:06 -06:00
Gregory Nutt	dfe6452b8e	Add untested OHCI driver for the SAMA5; structure naming and header files for USB host initialization prototypes	2013-08-11 17:11:32 -06:00
Gregory Nutt	69bc6afbd3	Add CAN configuration to STM32 config menu	2013-08-10 19:37:35 -06:00
Gregory Nutt	03130ca5a3	STM32: Fix STM32 serial init for non-reordered serial ports. From Lorenz Meier	2013-08-10 19:33:16 -06:00
Gregory Nutt	217ed87aad	Added option to disable STM32 serial port re-ordering	2013-08-10 19:29:44 -06:00
Gregory Nutt	6622714c5d	Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level	2013-08-10 09:06:53 -06:00
Gregory Nutt	8b317e9ea3	Standard configuration variables used to enable interupt controller debug; SAMA5: Correct handling of spurious interrupts	2013-08-03 08:22:37 -06:00
Gregory Nutt	6f99994722	More DAC changes from John Wharington	2013-07-30 11:41:53 -06:00
Gregory Nutt	84150fd7ed	STM32 F3 I2C driver from John Wharington	2013-07-30 10:35:17 -06:00
Gregory Nutt	4bdcceb3b3	STM32 DAC DMA fixes from John Wharington	2013-07-30 08:54:32 -06:00
Gregory Nutt	2f772c84fd	Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_	2013-07-26 10:09:17 -06:00
Gregory Nutt	cb3f394d53	Improve some ARMv7-A/M floating point register save time; Add floating point register save logic for ARMv7-A	2013-07-23 17:52:06 -06:00
Gregory Nutt	78bffd06c2	STM32 SDIO driver: Add supported for data block end (DBCKEND) interrupt. From Chia Cheng Tsao	2013-07-08 09:04:05 -06:00
Gregory Nutt	d649c2a462	Ticket #16: STM32 OTG FS device driver endpoint allocation. From Chia Cheng Tsao	2013-07-08 08:55:05 -06:00
Gregory Nutt	a954eb76b2	Created new directories to hold SPI-related files	2013-07-01 08:11:54 -06:00
Gregory Nutt	64d149233b	Fix integration of RAM test into the build and configuration system	2013-06-26 10:54:12 -06:00
Gregory Nutt	e00a8397bc	Add support for a separate CCM memory allocator for members of the STM32 family that support CCM memory	2013-06-25 09:13:30 -06:00