Gregory Nutt
|
1c66c06315
|
STM32F7 SDMMC: Make sure that all SDMMC configuration variables begin with STM32F7_; Eliminate CONFIG_SDMMC1/2_DMA altogether. Does not appear to be used.
|
2017-01-31 14:27:50 -06:00 |
|
Gregory Nutt
|
b7d29086e0
|
STM32F7 SDMMC: Add support for single bit operation on SDMMC2
|
2017-01-31 12:22:06 -06:00 |
|
David Sidrane
|
9066b4c093
|
stm32_sdio.c edited online with Bitbucket
|
2017-01-31 18:01:40 +00:00 |
|
Gregory Nutt
|
3dbdb3bb31
|
CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit
|
2017-01-31 11:52:00 -06:00 |
|
Gregory Nutt
|
2a4791f4ee
|
Removed dmasupported() method from the SDIO interface. That is now a bit in the cpapability set.
|
2017-01-31 09:51:15 -06:00 |
|
Gregory Nutt
|
9ac00a355f
|
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
|
2017-01-31 09:16:01 -06:00 |
|
Gregory Nutt
|
db77807ad2
|
Back out use on inline functions to access 16-bit registers. The inline functions were a work-around for misbehaving compiler years and years ago. The mon standard macro-ized version should work just fine.
|
2017-01-27 11:53:04 -06:00 |
|
Alan Carvalho de Assis
|
25bf212ab4
|
LPC43 pinset definitions: Add more 1 bit to pinset to reach SFSCLK0-SFSCLK3
|
2017-01-26 13:31:29 -06:00 |
|
Alan Carvalho de Assis
|
cf2beeb1cf
|
LPC43: Remove PINCONFIG_DIGITAL
|
2017-01-26 13:26:55 -06:00 |
|
Gregory Nutt
|
3b9bcd57ba
|
Remove uninterpretable comment.
|
2017-01-26 07:20:35 -06:00 |
|
Gregory Nutt
|
ff61d8f69d
|
Add missing sched_note_*() calls to sam4cm SMP functions.
|
2017-01-24 14:33:57 -06:00 |
|
Gregory Nutt
|
f40a0311f5
|
Merged in david_s5/nuttx/upstream_2_greg_f3_bkp (pull request #200)
Add missing STM32_BKP_BASE
|
2017-01-23 23:42:33 +00:00 |
|
David Sidrane
|
02825f3db0
|
Add missing STM32_BKP_BASE
|
2017-01-23 13:38:57 -10:00 |
|
Gregory Nutt
|
492bde8cdb
|
Merged in david_s5/nuttx/upstream_2_greg_f7_config (pull request #199)
Added missing ARCH_HAVE_RESET for F7
|
2017-01-23 23:08:50 +00:00 |
|
David Sidrane
|
ab18e483bd
|
Added missing ARCH_HAVE_RESET for F7
|
2017-01-23 13:01:55 -10:00 |
|
Gregory Nutt
|
4a8c6a6d2d
|
ELF: Move ARMv6-M, ARMv7-M, and legacy ARM versions of ELF relocation logic to libc/machine
|
2017-01-21 15:24:25 -06:00 |
|
Gregory Nutt
|
edd9186540
|
ELF: Move ARMv7-A and ARMv7-R versions of ELF relocation logic to libc/machine
|
2017-01-21 14:40:26 -06:00 |
|
Gregory Nutt
|
be5ba90d4f
|
Move optimized ARM memcpy functions from arch/arm/src/ to libc/machine/. This is necessary for the PROTECTED and KERNEL build modes. Otherwise, memcpy() will be built in to kernel space and not accessible to applications.
|
2017-01-20 10:53:46 -06:00 |
|
Gregory Nutt
|
3c4684ef5f
|
Eliminate CONFIG_ARCH_OPTIMIZED_FUNCTIONS. Move options to select architectur-specific C library options from libc/Kconfig to libc/machine/Kconfig and rename.
|
2017-01-20 09:30:07 -06:00 |
|
Gregory Nutt
|
9cc37d8ee1
|
Math library optimatizations for FPU only apply to ARMv8 which is not yet supported.
|
2017-01-20 08:24:59 -06:00 |
|
Gregory Nutt
|
cbeade4069
|
Remove comment blocks from empty file sections.
|
2017-01-19 11:59:41 -06:00 |
|
Gregory Nutt
|
0c0c98691e
|
STM32 and STM32L4 Oneshot: EBUSY is more appropriate error then ENOMEM
|
2017-01-18 16:20:15 -06:00 |
|
Wolfgang Reißnegger
|
a22dc9b1a8
|
SAM3/4: Add support for ATSAM4S4C.
|
2017-01-18 11:56:51 -08:00 |
|
Gregory Nutt
|
b05f928143
|
STM32L4: Port fix for multiple oneshot timers from STM32. Also fixes a few issues with original STM32 implementation.
|
2017-01-18 10:45:22 -06:00 |
|
Gregory Nutt
|
0069761d6f
|
STM32 Oneshot: Fix logic so that it can support multiple oneshot timers.
|
2017-01-18 08:48:26 -06:00 |
|
Neil Hancock
|
2ece27f435
|
Kinetis: Add support for K64/K66 RTC lower half driver
|
2017-01-17 15:34:44 -06:00 |
|
Gregory Nutt
|
0db31d0cd1
|
SMP: Fix a typo introduced in c5b00ccfc4
|
2017-01-16 08:48:05 -06:00 |
|
Gregory Nutt
|
a2083fbc92
|
Update some comments
|
2017-01-15 12:35:03 -06:00 |
|
Gregory Nutt
|
2837eff0cd
|
SMP: Most cosmetic clean-up from review of previous commit.
|
2017-01-14 09:22:13 -06:00 |
|
Gregory Nutt
|
c5b00ccfc4
|
SMP Signals: Fix some SMP signal delivery logic. Was not handling some critical sections correctly and was missing logic to signal tasks running on other CPUs.
|
2017-01-14 08:28:37 -06:00 |
|
Gregory Nutt
|
3ed091376c
|
In all implementations of _exit(), use enter_critical_section() vs. disabling local interrupts.
|
2017-01-13 11:08:24 -06:00 |
|
Maciej Skrzypek
|
902c41462d
|
Kinetis: New K60 has no Flex memory
|
2017-01-13 08:20:48 -06:00 |
|
Maciej Skrzypek
|
0c430e1d0f
|
Kinetis MCG: Wrong FRDIV set in MCG_C1
|
2017-01-13 08:19:05 -06:00 |
|
Maciej Skrzypek
|
b6b30bcc7d
|
Kinetis: Need to set HAVE_UART_DEVICE when UART4 is selected
|
2017-01-13 08:16:31 -06:00 |
|
Maciej Skrzypek
|
98bdd12521
|
Kinetis Serial: Fixed compile error when UART5 is selected
|
2017-01-13 08:14:41 -06:00 |
|
Maciej Skrzypek
|
4becebe59f
|
Kinetis: Fixed wrong MCG VDIV calculation on new NXP K60
|
2017-01-13 08:13:21 -06:00 |
|
Maciej Skrzypek
|
bc1826da63
|
Kinetis: Added CHIP_MK60FN1M0VLQ12 chip
|
2017-01-13 08:10:03 -06:00 |
|
Gregory Nutt
|
4ede950039
|
Fix some typos in comments.
|
2017-01-12 18:02:23 -06:00 |
|
Gregory Nutt
|
895f01dd80
|
Merged in david_s5/nuttx/upstream_revert_265af481209d60033f7cd4c4216048b1ce3eb435 (pull request #194)
Revert "STM32 serial: Make input hardware flow-control work with RX DMA. From Jussi Kivilinna"
|
2017-01-12 17:58:20 -06:00 |
|
Gregory Nutt
|
bd696b8c40
|
Merged in david_s5/nuttx/upstream_to_greg_HSI_ON_re (pull request #193)
HSI should not be turned off
|
2017-01-12 17:47:16 -06:00 |
|
David Sidrane
|
20e723715c
|
HSI should not be turned off
|
2017-01-12 13:44:03 -10:00 |
|
Gregory Nutt
|
d5cdab0e51
|
Revert "HSI should not be turned off"
This reverts commit 4e051c05fb.
This change broke the STM32 seril driver.
|
2017-01-12 16:27:04 -06:00 |
|
Gregory Nutt
|
3191549116
|
Merged in david_s5/nuttx/upstream_to_greg_HSI_ON (pull request #191)
HSI should not be turned off
|
2017-01-11 17:14:14 -06:00 |
|
Gregory Nutt
|
62fe2bf11a
|
Merged in david_s5/nuttx/upstream_to_greg_HSI_not_req_on_F4 (pull request #192)
STM32F4 does not have the requierment that the HSI be on for FLASH erase/write operations
|
2017-01-11 17:13:36 -06:00 |
|
David Sidrane
|
0dbf44e3ad
|
STM32F4 does not have the requierment that the HSI be on for FLASH erace/write operations
|
2017-01-11 12:47:24 -10:00 |
|
David Sidrane
|
4e051c05fb
|
HSI should not be turned off
|
2017-01-11 12:18:12 -10:00 |
|
Gregory Nutt
|
1f33654f2d
|
Update some comments
|
2017-01-06 17:15:01 -06:00 |
|
Gregory Nutt
|
905a1ce10f
|
SAMV7 Ethernet: Fix a compiler error introduced with commit 7467329a98
|
2017-01-06 16:49:18 -06:00 |
|
Gregory Nutt
|
13d00344c9
|
Add configuration to prevent selection of Windows native toolchains when using Ubuntu under Windows 10
|
2017-01-02 07:16:47 -06:00 |
|
Gregory Nutt
|
3a0413c048
|
Back out most of 34be3e7c3c and update README again. Windows native tools cannot be used with Ubuntu under Windows 10 now. For Cygwin, that support depends on the 'cygpath -w' tool to convert POSIX paths to Windows paths. There is no corresponding tool for Ubuntu under Windows 10.
|
2017-01-01 16:29:03 -06:00 |
|