sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
35,743 Commits 1 Branch 0 Tags 291 MiB
1c91aec6ae
Commit Graph

15245 Commits

Author SHA1 Message Date
David Sidrane
2cbcb8fd00 arch/arm/src/imxrt/imxrt_clockconfig.c and board.h: Allow clock setting for SPI and I2C from board.h. 2019-12-12 08:33:05 -06:00
David Sidrane
42dfd18d7c arch/arm/src/imxrt/imxrt_lpspi.c: Fixed race on register setting. The ouput frequency was not being initialized correctly. The value of LPSPI_TCR_PRESCALE was getting set to 7. Making the setting atomic fixed the race. I suppose a DSB() could have also fixed it. 2019-12-12 08:31:24 -06:00
David Sidrane
587dcaa6e6 arch/arm/src/imxrt/imxrt_lpspi.c: Remove hack setting LPSPI1 daisy irrespective of pin config. I assume this hack pre dated the addition of the dasiy chain setting. It was forcing LPSPI1 pins to read from selection 1 irrespective of pin config. The correct input selection is done in imxrt_config_gpio. 2019-12-12 08:29:08 -06:00
David Sidrane
3d4eb32e48 arch/arm/src/imxrt/imxrt_lpi2c.c: Added configurations to fine tune LPI2C Timeouts. 2019-12-12 08:27:02 -06:00
Nathan Hartman
9655730ef8 Fix various typos and spelling errors. 2019-12-12 07:41:51 -06:00
Petro Karashchenko
3737aa83fa arch/arm/src/am335x/am335x_i2c.c: AM225x I2C driver now works in both polling and interrupt modes. 2019-12-12 07:39:36 -06:00
Juha Niskanen
c8268cbfcf Merged in juniskane/nuttx-4/Juha-Niskanen/remove-reference-to-nonexistent-config-m-1575888266268 (pull request #1093) 
Remove reference to nonexistent config macro. stm32l4_spi.h edited online with Bitbucket

stm32l4_spi.h edited online with Bitbucket

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-11 12:06:03 +00:00
Juha Niskanen
50768ac7a6 Merged in juniskane/nuttx-3/Juha-Niskanen/kconfig-edited-online-with-bitbucket-1575887906303 (pull request #1092) 
Kconfig edited online with Bitbucket

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-11 12:04:20 +00:00
Masayuki Ishikawa
0eb9bfa49d Merged in masayuki2009/nuttx.nuttx/fe310_with_pll (pull request #1094) 
fe310 with pll

* arch: fe310: Introduce CONFIG_ARCH_CHIP_FE310_QEMU

* boards: hifive1-revb: Introduce CONFIG_ARCH_CHIP_FE310_QEMU

* arch: fe310: Add support for PLL

* boards: hifive1-revb: Increase uart0 tx buff size and add getprime app

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-11 12:01:53 +00:00
Petro Karashchenko
813902cf87 arch/arm/src/am335x and boards/arm/am335x/beaglebone-black: Add I2C support for AM335X. 2019-12-10 20:22:25 -06:00
Gregory Nutt
425b1c737c Fix a problem I introduced in my recent review. 2019-12-10 18:04:56 -06:00
David Sidrane
2e71e0632f arch/arm/src/imxrt/imxrt_usdhc.c: IMXRT106x USDHC: Support regular GPIO for CD and inversion. 2019-12-10 17:58:08 -06:00
Petro Karashchenko
2f00eefa5d arch/arm/src/am335x: Adds AM335x Clock Configuration. 2019-12-10 17:55:08 -06:00
Ouss4
7dcf8dde7c arch/xtensa/src/esp32/esp32_start.c: A comma was missing in g_idlestack attributes. 2019-12-10 13:42:58 -06:00
Ouss4
47129b36bd arch/mips/*: Run nxstyle on the arch/mips directory. 2019-12-08 08:09:11 -06:00
Masayuki Ishikawa
2cde7dcc8d Merged in masayuki2009/nuttx.nuttx/sparkfun_redv (pull request #1091) 
Sparkfun RED-V Things Plus

* board: hifive1-revb: Update README-qemu.txt

* arch: fe310: Works with SparkFun RED-V Things Plus

    Should work with HiFive1 Rev.B but not tested yet.

* boards: hifive1-revb: Works with SparkFun RED-V Things Plus

    Should work with HiFive1 Rev.B but not tested yet.

Approved-by: Alan Carvalho de Assis <acassis@gmail.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-08 12:42:48 +00:00
Gregory Nutt
cb288fdfe2 arch/arm/src/stm32f7/stm32_serial.c: Fix a new warning found in build testing. 2019-12-07 13:14:50 -06:00
David Sidrane
db6fe28fa6 Merged in david_s5/nuttx/master_imxrt_cap (pull request #1089) 
imxrt106x:pinout add ALT 8 GPIO_GPT1_CAPTURE[1|2]

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-05 22:32:43 +00:00
David Sidrane
1c05846f92 Merged in david_s5/nuttx-5/David-Sidrane/archarmsrcstm32f7stm32_serialc-fix-typo-1575381167793 (pull request #1087) 
arch/arm/src/stm32f7/stm32_serial.c:  Fix typo in UART7

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-03 14:25:08 +00:00
David Sidrane
92a3a8e026 arch/arm/src/stm32f7/stm32_serial.c: Serial nxsyle fixes (sans long table lines). 2019-12-03 07:23:14 -06:00
David Sidrane
baeaf54c6c arch/arm/src/stm32f7/stm32_serial.c: Add Tx U[S]ART DMA. 2019-12-03 07:21:58 -06:00
David Sidrane
d3e0d5ee72 arch/arm/src/stm32f7/stm32_serial.c: CONFIG_USART_DMAPRIO->CONFIG_USART_RXDMAPRIO. 2019-12-03 07:18:42 -06:00
David Sidrane
b095ab392c arch/arm/src/stm32/stm32_serial.c: SERIAL_HAVE_DMA->SERIAL_HAVE_RXDMA. 2019-12-03 07:15:59 -06:00
David Sidrane
fe12b843d0 arch/arm/src/stm32/stm32_hciuart.c: CONFIG_STM32_HCIUART_DMAPRIO->CONFIG_STM32_HCIUART_RXDMAPRIO. 2019-12-03 07:14:30 -06:00
David Sidrane
bbdc6875de arch/arm/src/stm32l4/stm32l4_serial.c: SERIAL_HAVE_DMA->SERIAL_HAVE_RXDMA. 2019-12-03 07:11:54 -06:00
Gregory Nutt
f4102b7d6e arch/arm/src/stm32f0l0g0/stm32_serial_v1.c: SERIAL_HAVE_DMA->SERIAL_HAVE_RXDMA. 2019-12-03 07:10:26 -06:00
David Sidrane
64d956e7a1 arch/arm/src/stm32l4/stm32l4_serial.c: CONFIG_USART_DMAPRIO->CONFIG_USART_RXDMAPRIO. 2019-12-03 07:08:56 -06:00
David Sidrane
e35325e385 arch/arm/src/stm32f0l0g0/stm32_serial_v1.c: CONFIG_USART_DMAPRIO->CONFIG_USART_RXDMAPRIO 2019-12-03 07:07:49 -06:00
Guillherme Amaral
15f358d6a9 arch/arm/src/stm32f0l0g0: Fix PWM on TIM16 not working: Adjust TIM registers, Add pins available for mapping TIM14-17, CCMR2 registers was being handled for TIMs who do not have it, and Fix PWM frequency being doubled when in center-aligned mode. 2019-12-02 09:14:56 -06:00
Masayuki Ishikawa
f46e5d58d0 Merged in masayuki2009/nuttx.nuttx/fe310_updates (pull request #1085) 
fe310 updates

* arch: fe310: Rename CLIC to CLINT

* boards: hifive1-revb: Add README.txt

* arch: fe310: Use atomic operations in up_irq_save() and up_irq_enable()

* arch: fe310: Remove unused configs in Kconfig

* boards: hifive1-revb: Change UART0 buff size and remove debug features.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-02 14:45:41 +00:00
OSer
1e2c840752 Merged in OSer916/nuttx/fix_stm32l4_sai (pull request #1083) 
boards/arm/stm32f7/stm32f746g-disco: add SAI driver

* ignore TAGS

* arch/arm/src/stm32l4/stm32l4_sai.c: fix type error

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-02 14:22:58 +00:00
Valmantas Palikša
cc0a0e7aa9 arch/arm/src/armv7-m/up_schedulesigaction.c: Correct hardfault that can occur when killing a task via Ctrl-C in PROTECTED mode. 2019-12-02 08:16:34 -06:00
Gregory Nutt
736a0da8ec Fix various coding standard problems in last PR, mostly as reported by tools/nxstyle. 2019-12-01 20:17:57 -06:00
OSer
498fb6d15f Merged in OSer916/nuttx/stm32f746g-disco_sai (pull request #1081) 
boards/arm/stm32f7/stm32f746g-disco: add SAI driver

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-02 01:55:29 +00:00
Masayuki Ishikawa
a5501cf853 Merged in masayuki2009/nuttx.nuttx/riscv-updates (pull request #1080) 
riscv updates

* arch: risc-v: Remove up_dumpstate.c because the file had been merged into up_assert.c

* boards: gapuino: Modify Makefile which conforms to NuttX standards

* boards: nr5m100-nexys4: Modify Makefile which conforms to NuttX standards

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-01 13:01:04 +00:00
Guillherme Amaral
74883ddd97 arch/arm/src/stm32f0l0g0/stm32_pwm.c: Add missing logic for PWM stop for TIM14-15. 2019-11-30 15:36:41 -06:00
Guillherme Amaral
d022b56b84 arch/arm/src/stm32f0l0g0/Kconfig: Select STM32F0L0G0_PWM when TIM{14-17}_PWM enabled. 2019-11-30 15:34:00 -06:00
Gregory Nutt
108ffe7044 Within the OS, nxisg_sleep() should be used instead of sleep(). sleep() is a cancellation point and sets the errno value. Neither of which should be done inside the OS. 2019-11-29 19:03:24 -06:00
Gregory Nutt
4f1d891067 arch/: Within the OS, nxisg_usleep() should be used instead of usleep(). usleep() is a cancellation point and sets the errno value. Neither of which should be done inside the OS. 2019-11-29 17:54:43 -06:00
David Sidrane
43a6e43a0f arch/arm/src/stm32f7/stm32_ethernet.c: Add some delays so that ifup() does not hog the CPU. 2019-11-29 17:19:06 -06:00
Gregory Nutt
6b66ac0e04 Some minor changes from review of last PR. 2019-11-28 14:45:16 -06:00
Masayuki Ishikawa
7a8e9581ca Merged in masayuki2009/nuttx.nuttx/hifive1-qemu (pull request #1078) 
HiFive1 with qemu

* arch: risc-v: Add include/.gitignore

* arch: risc-v: Add src/.gitignore

* arch: risc-v: Remove uncommon function prototypes in include/irq.h

* arch: risc-v: Add missing symbols and function prototypes in src/common/up_internal.h

* arch: risc-v: Add src/common/up_modifyreg32.c

* arch: risc-v: Enable include Make.dep in src/Makefile

* arch: risc-v: Fix stack coloration in common/up_createstack.c

* arch: risc-v: Add common/up_puts.c

* arch: risc-v: Add common/up_checkstack.c

* arch: rv32im: Move all logics from up_dumpstate.c to up_assert.c

    This change is same as other architectures like arm/src/armv7-m

* arch: Select ARCH_HAVE_STACKCHECK for RISC-V in Kconfig

* arch: risc-v: Add SiFive fe310 processor

    NOTE: Currently only tested with qemu

* boards: hifive1-revb: Add SiFive hifive1-revb board

    NOTE: Currently only tested with qemu

* tools: Add fe310 processor to configure.sh

Approved-by: Alan Carvalho de Assis <acassis@gmail.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-11-28 20:37:24 +00:00
Gregory Nutt
69318b1024 Re-implements reverted commit 344f7bc9f6 in a way that should not have the undesired side-effect. include/nuttx/sched.h: Add a bit to the TCB flags to indicat the thread is a user thread in a syscall. sched/nuttx/nxsig_dispatch.c: Delay dispatching to signal handlers if within a system call. In all syscall implementations: Process delayed signal handling when exiting system call. 2019-11-28 12:47:36 -06:00
Gregory Nutt
cbdd590c82 Revert "include/nuttx/sched.h: Add storage for a previous signal mask. arch/: In all syscall implementations, block all signals before dispatching a system call; resotre signal mask when the system call returns." 
Using the sigprocmask() for this purpose has too many side-effects.

This reverts commit 344f7bc9f6.
 2019-11-28 11:57:54 -06:00
Gregory Nutt
344f7bc9f6 include/nuttx/sched.h: Add storage for a previous signal mask. arch/: In all syscall implemenations, block all signals before dispatching a system call; resotre signal mask when the system call returnes. 2019-11-28 10:51:29 -06:00
Beat Küng
fe49dcf622 Merged in bkueng/nuttx/fix_h7_dmamux_defines (pull request #1079) 
fix stm32h7x3xx_dmamux.h: add missing underscore to defines

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-11-28 12:23:20 +00:00
kyChu
01cda09aba Merged in kyChuGit/nuttx (pull request #1077) 
STM23L4 LPTIM PWM support with multi-channel

* arch/arm/src/stm32l4/stm32l4_pwm.c:
        fixed some bugs
    arch/arm/src/stm32l4/stm32l4_pwm.h:
        support LPTIM PWM if PWM multi-channel is selected
        Channel mode for LPTIM are not available

* arch/arm/src/stm32l4/Kconfig:  add new configuration for STM32L4 LPTIM support

* arch/arm/src/stm32l4/stm32l4_pwm.c:  fix warning: resetbit may be used uninitialized

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-11-27 13:45:41 +00:00
Dave Marples
c2211d8d3c arch/arm/src/imxrt/imxrt_lowputc.c: This commit removes a largely redundant check in the imxrt lowputc code which will speed it up a little. 
I did suspect that it was just about possible that there's a use for this check (specifically, when you're changing serial the clock immediately after the character is sent) but since we're only testing that the character has left the holding register and not that it's actually been sent to line I don't think it's valid even for this case.
 2019-11-26 17:45:23 -06:00
Dave Marples
7f56da62f1 arch/arm/src/imxrt: This commit fixes the clock configuration for the imxrt family. This allows WFI to be re-enabled. It also adds a few wait-for-sync loops which are necessary according to the specification but which weren't in the code. It's possible I've added a more than are strictly needed, but for this I figure erring on the side of caution is the right thing to do. 2019-11-26 17:41:54 -06:00
Gregory Nutt
c86fabb9b2 STM32 F4 LPTIM: Cosmetic changes from application of tools/nxstyle to all files modified in last PR. 2019-11-25 08:04:45 -06:00