sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
35,787 Commits 1 Branch 0 Tags 291 MiB
1db6f929a2
Commit Graph

12258 Commits

Author SHA1 Message Date
Pieter du Preez
1db6f929a2 arch/arm/src/stm32l4/Kconfig: Fixed conditional config for STM32L4_STM32L432XX and STM32L4_STM32L442XX archs. The wrong spelling of STM32L4_STM32L432XX and STM32L4_STM32L442XX, caused the following three peripherals to be available although they are not supported by these architectures: USART3, SPI2, and I2C1. These were available for selection in menuconfig and caused compiler errors when selected. This patch replaces the STM32L4_L432XX and STM32L4_L442XX items with STM32L4_STM32L432XX and STM32L4_STM32L442XX. 2019-12-24 15:51:28 -06:00
David Sidrane
eba8eec74b STM32F7 and STM32H7 SDMMC internal pull up usage fixed 
Code was flawed in that the Pins are defined with the
    pullups in the definition. Since there are no alterntes pins
    there is no way to remove them. So not enabling the CONFIG
    pull up did nothing as did enabling them.

    Code also ignored the use of D0 for ready detection causing
    3X+ the chatter.

    This is now a compile time feature as there was no reason for
    it to be a run time. It wasted both flash and ram.
 2019-12-24 10:52:09 -06:00
Xiang Xiao
87cf5c58ae Correct some problems with network timed events when there are multiple network devices in the configuration. 
Squashed commit of the following:

Author: Gregory Nutt <gnutt@nuttx.org>

    Ran nxstyle against many of the affected files.  But this job was too big for today.  Many of the network drivers under arch are highly non-compiant and generate many, many faults from nxstyle.  Those will have to be visited again another day.

Author: Xiang Xiao <xiaoxiang@xiaomi.com>

    This effects all network drivers as well as timing related portions of net/: devif_poll_tcp_timer shouldn't be skipped in the multiple card case.  devif_timer will be called multiple time in one period if the multiple card exist, the elapsed time calculated for the first callback is right, but the flowing callback in the same period is wrong(very short) because the global variable g_polltimer is used in the calculation.  So let's pass the delay time to devif_timer and remove g_polltimer.
 2019-12-24 10:37:30 -06:00
David Sidrane
9b7afcdfe5 imxrt106x:pinout add ALT 8 GPIO_GPT2_COMPARE3 & fix GPIO_GPT1_CAPTURE[1|2] 2019-12-21 02:54:50 -08:00
David Sidrane
3dcd238d5e imxrt:lpi2c Fix interrupt storm on failed write. 
The SDF was not acked if ther was an error
   on the last write.
 2019-12-21 02:54:50 -08:00
David Sidrane
0050ba9ac7 imxrt:lpi2c ensure that on an error status reflects it. 
After an error the STOP detect was overwriting the
   previous error status.
 2019-12-21 02:54:50 -08:00
David Sidrane
9ebeaa1d53 imxrt:lpi2c imxrt_lpi2c_reset uses GPIO with SION 
Reworked imxrt_lpi2c_reset to use GPIO because the IO
   can not be mapped from a peripheral to a GPIO with
   simple bit logic.
 2019-12-21 02:54:50 -08:00
David Sidrane
f297e41219 imxrt:gpio Support readback on OUT GPIO 
imxrt:gpio ran through nxstyle
 2019-12-21 02:54:44 -08:00
Guillherme Amaral
eeed40aa0c arch/arm/src/stm32f0l0g0/ and boards/arm/stm32f0l0g0/nucleo-g070rb/include/board.h: Add I2C pinmap. In Kconfig select I2C2 for this part. Update I2C pin definitions in board.h. 2019-12-20 13:02:13 -06:00
raiden00pl
d80d6b8774 Merged in raiden00/nuttx_nrf52 (pull request #1098) 
nrf52 updates

arch/arm/nrf52: add more options to Kconfig

arch/arm/nrf52: cosmetics changes to some files

arch/arm/nrf52: nfct, radio, twi, spi registers definitions

arch/arm/nrf52: fix warnings in nrf52_gpio.c

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-19 15:40:56 +00:00
Gregory Nutt
e7c9c89985 Trivial updates to files modified in last PR based on results of tools/nxstyle. 2019-12-16 13:13:04 -06:00
raiden00pl
a0429bcb20 Merged in raiden00/nuttx_nrf52 (pull request #1096) 
nrf52 updates

board/arm/nrf52/nrf52832-dk: use the on-board virtual COM pins as default UART0 configuration

board/arm/nrf52: initial support for the nrf52840-dk board

board/arm/nrf52: initial support for the nrf52840-dk dongle board

arch/arm/src/nrf52: add support for port 1 GPIO

arch/arm/src/nrf52: initial support for UART1

arch/arm/src/nrf52: add UICR definitions

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-16 18:35:45 +00:00
Valmantas Palikša
bc7566a83f arch/arm/include/armv7-m/syscall.h: ARM EABI specifies that the stack should be aligned by 8 on function calls, inside the function is not required to be aligned by 8. Since these functions call svc, compiler doesn't know that the svc is a function, therefore it does not do any stack management. This change pushes an even number of args to the stack and maintains an 8 byte alignment. I've checked the assembly and it doesn't cause any more overhead that the hand written assembly. 2019-12-16 09:10:08 -06:00
Gregory Nutt
6bff1f4df4 arch/arm/include/samd2l2/sam_adc.h: I was wrong... this header file does belong in the samd2l2 include directory. It contains IOCTL definitions that are needed by applications. Usage of a chip-specific header file is, however, not really a good portable design because it requires that the application know that it is running on a specific chip. But still, if we are going to do that, the include directory is where the header file belongs. My apologies for the bad judgement. 2019-12-16 03:53:05 -06:00
Alan Carvalho de Assis
787128930f arch/arm/src/samd2l2 and boards/arm/samd2l2/arduino-m0: Add support to SAMD2L ADC driver and board support to Arduino M0. 2019-12-15 17:36:59 -06:00
Petro Karashchenko
871197b4ec arch/arm/src/am335x/ and boards/arm/am335x/beaglebone-black/: Initial CAN support for the BBB. 2019-12-15 17:12:54 -06:00
Petro Karashchenko
ca4e6077e2 arch/arm/src/am335x/am335x_i2c.c: Improvements to AM335x I2C. 2019-12-15 17:02:59 -06:00
David Sidrane
2cbcb8fd00 arch/arm/src/imxrt/imxrt_clockconfig.c and board.h: Allow clock setting for SPI and I2C from board.h. 2019-12-12 08:33:05 -06:00
David Sidrane
42dfd18d7c arch/arm/src/imxrt/imxrt_lpspi.c: Fixed race on register setting. The ouput frequency was not being initialized correctly. The value of LPSPI_TCR_PRESCALE was getting set to 7. Making the setting atomic fixed the race. I suppose a DSB() could have also fixed it. 2019-12-12 08:31:24 -06:00
David Sidrane
587dcaa6e6 arch/arm/src/imxrt/imxrt_lpspi.c: Remove hack setting LPSPI1 daisy irrespective of pin config. I assume this hack pre dated the addition of the dasiy chain setting. It was forcing LPSPI1 pins to read from selection 1 irrespective of pin config. The correct input selection is done in imxrt_config_gpio. 2019-12-12 08:29:08 -06:00
David Sidrane
3d4eb32e48 arch/arm/src/imxrt/imxrt_lpi2c.c: Added configurations to fine tune LPI2C Timeouts. 2019-12-12 08:27:02 -06:00
Nathan Hartman
9655730ef8 Fix various typos and spelling errors. 2019-12-12 07:41:51 -06:00
Petro Karashchenko
3737aa83fa arch/arm/src/am335x/am335x_i2c.c: AM225x I2C driver now works in both polling and interrupt modes. 2019-12-12 07:39:36 -06:00
Juha Niskanen
c8268cbfcf Merged in juniskane/nuttx-4/Juha-Niskanen/remove-reference-to-nonexistent-config-m-1575888266268 (pull request #1093) 
Remove reference to nonexistent config macro. stm32l4_spi.h edited online with Bitbucket

stm32l4_spi.h edited online with Bitbucket

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-11 12:06:03 +00:00
Juha Niskanen
50768ac7a6 Merged in juniskane/nuttx-3/Juha-Niskanen/kconfig-edited-online-with-bitbucket-1575887906303 (pull request #1092) 
Kconfig edited online with Bitbucket

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-11 12:04:20 +00:00
Petro Karashchenko
813902cf87 arch/arm/src/am335x and boards/arm/am335x/beaglebone-black: Add I2C support for AM335X. 2019-12-10 20:22:25 -06:00
Gregory Nutt
425b1c737c Fix a problem I introduced in my recent review. 2019-12-10 18:04:56 -06:00
David Sidrane
2e71e0632f arch/arm/src/imxrt/imxrt_usdhc.c: IMXRT106x USDHC: Support regular GPIO for CD and inversion. 2019-12-10 17:58:08 -06:00
Petro Karashchenko
2f00eefa5d arch/arm/src/am335x: Adds AM335x Clock Configuration. 2019-12-10 17:55:08 -06:00
Gregory Nutt
cb288fdfe2 arch/arm/src/stm32f7/stm32_serial.c: Fix a new warning found in build testing. 2019-12-07 13:14:50 -06:00
David Sidrane
db6fe28fa6 Merged in david_s5/nuttx/master_imxrt_cap (pull request #1089) 
imxrt106x:pinout add ALT 8 GPIO_GPT1_CAPTURE[1|2]

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-05 22:32:43 +00:00
David Sidrane
1c05846f92 Merged in david_s5/nuttx-5/David-Sidrane/archarmsrcstm32f7stm32_serialc-fix-typo-1575381167793 (pull request #1087) 
arch/arm/src/stm32f7/stm32_serial.c:  Fix typo in UART7

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-03 14:25:08 +00:00
David Sidrane
92a3a8e026 arch/arm/src/stm32f7/stm32_serial.c: Serial nxsyle fixes (sans long table lines). 2019-12-03 07:23:14 -06:00
David Sidrane
baeaf54c6c arch/arm/src/stm32f7/stm32_serial.c: Add Tx U[S]ART DMA. 2019-12-03 07:21:58 -06:00
David Sidrane
d3e0d5ee72 arch/arm/src/stm32f7/stm32_serial.c: CONFIG_USART_DMAPRIO->CONFIG_USART_RXDMAPRIO. 2019-12-03 07:18:42 -06:00
David Sidrane
b095ab392c arch/arm/src/stm32/stm32_serial.c: SERIAL_HAVE_DMA->SERIAL_HAVE_RXDMA. 2019-12-03 07:15:59 -06:00
David Sidrane
fe12b843d0 arch/arm/src/stm32/stm32_hciuart.c: CONFIG_STM32_HCIUART_DMAPRIO->CONFIG_STM32_HCIUART_RXDMAPRIO. 2019-12-03 07:14:30 -06:00
David Sidrane
bbdc6875de arch/arm/src/stm32l4/stm32l4_serial.c: SERIAL_HAVE_DMA->SERIAL_HAVE_RXDMA. 2019-12-03 07:11:54 -06:00
Gregory Nutt
f4102b7d6e arch/arm/src/stm32f0l0g0/stm32_serial_v1.c: SERIAL_HAVE_DMA->SERIAL_HAVE_RXDMA. 2019-12-03 07:10:26 -06:00
David Sidrane
64d956e7a1 arch/arm/src/stm32l4/stm32l4_serial.c: CONFIG_USART_DMAPRIO->CONFIG_USART_RXDMAPRIO. 2019-12-03 07:08:56 -06:00
David Sidrane
e35325e385 arch/arm/src/stm32f0l0g0/stm32_serial_v1.c: CONFIG_USART_DMAPRIO->CONFIG_USART_RXDMAPRIO 2019-12-03 07:07:49 -06:00
Guillherme Amaral
15f358d6a9 arch/arm/src/stm32f0l0g0: Fix PWM on TIM16 not working: Adjust TIM registers, Add pins available for mapping TIM14-17, CCMR2 registers was being handled for TIMs who do not have it, and Fix PWM frequency being doubled when in center-aligned mode. 2019-12-02 09:14:56 -06:00
OSer
1e2c840752 Merged in OSer916/nuttx/fix_stm32l4_sai (pull request #1083) 
boards/arm/stm32f7/stm32f746g-disco: add SAI driver

* ignore TAGS

* arch/arm/src/stm32l4/stm32l4_sai.c: fix type error

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-02 14:22:58 +00:00
Valmantas Palikša
cc0a0e7aa9 arch/arm/src/armv7-m/up_schedulesigaction.c: Correct hardfault that can occur when killing a task via Ctrl-C in PROTECTED mode. 2019-12-02 08:16:34 -06:00
Gregory Nutt
736a0da8ec Fix various coding standard problems in last PR, mostly as reported by tools/nxstyle. 2019-12-01 20:17:57 -06:00
OSer
498fb6d15f Merged in OSer916/nuttx/stm32f746g-disco_sai (pull request #1081) 
boards/arm/stm32f7/stm32f746g-disco: add SAI driver

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-02 01:55:29 +00:00
Guillherme Amaral
74883ddd97 arch/arm/src/stm32f0l0g0/stm32_pwm.c: Add missing logic for PWM stop for TIM14-15. 2019-11-30 15:36:41 -06:00
Guillherme Amaral
d022b56b84 arch/arm/src/stm32f0l0g0/Kconfig: Select STM32F0L0G0_PWM when TIM{14-17}_PWM enabled. 2019-11-30 15:34:00 -06:00
Gregory Nutt
108ffe7044 Within the OS, nxisg_sleep() should be used instead of sleep(). sleep() is a cancellation point and sets the errno value. Neither of which should be done inside the OS. 2019-11-29 19:03:24 -06:00
Gregory Nutt
4f1d891067 arch/: Within the OS, nxisg_usleep() should be used instead of usleep(). usleep() is a cancellation point and sets the errno value. Neither of which should be done inside the OS. 2019-11-29 17:54:43 -06:00