arch/arm/src/stm32h7/stm32_dma.c:
* Include <inttypes.h> explicitly for format specifiers.
* In functions stm32_mdma_capable(), stm32_mdma_dump(),
stm32_sdma_setup(), stm32_sdma_capable(), stm32_sdma_dump(),
stm32_bdma_setup(), stm32_bdma_capable(), stm32_bdma_dump(),
stm32_dmamux_dump(), stm32_dmachannel(), stm32_dmafree(), and
stm32_dmadump():
Where appropriate, use format specifiers from <inttypes.h> in
calls to dmainfo(). This removes numerous compiler warnings
like:
warning: format '%x' expects argument of type 'unsigned int',
but argument 3 has type 'uint32_t {aka long unsigned int}'
[-Wformat=]
* In function stm32_mdma_disable():
Remove wrong redefinition of 'dmachan' parameter as a local
variable. This fixes the following compiler error that occurs
when building with CONFIG_STM32H7_MDMA:
chip/stm32_dma.c:930:17: error: 'dmachan' redeclared as
different kind of symbol
DMA_CHANNEL dmachan = (DMA_CHANNEL)handle;
^~~~~~~
chip/stm32_dma.c:928:44: note: previous definition of 'dmachan'
was here
static void stm32_mdma_disable(DMA_CHANNEL dmachan)
^~~~~~~
chip/stm32_dma.c:930:43: error: 'handle' undeclared (first use
in this function); did you mean 'random'?
DMA_CHANNEL dmachan = (DMA_CHANNEL)handle;
^~~~~~
random
For example Windows RNDIS driver issues SETUP requests that are 76 bytes
long. Previously NuttX would read them all, but only if they arrive at
the same time. If host transfer scheduling causes a pause between the
two DATA packets, stm32_ep0out_receive() would proceed with an incomplete
transfer. The rest of the data could either be skipped by the error handler
branch, or be left in NAK state forever, stopping any further communication
on the endpoint.
This commit changes it so that the whole transfer has to be received before
SETUP handler is called. Depending on CONFIG_USBDEV_SETUP_MAXDATASIZE any
excess bytes will be discarded, but doing this in a controlled way ensures
deterministic behavior. In the specific case of RNDIS, the trailing bytes
are unused padding bytes and can be safely discarded.
arch/arm/src/stm32/Kconfig:
* configs ARCH_CHIP_STM32G431K, ARCH_CHIP_STM32G431C,
ARCH_CHIP_STM32G431R, ARCH_CHIP_STM32G431M, and
ARCH_CHIP_STM32G431V: Fix copy/paste of incorrect
names shown in the Kconfig menu.
nxstyle is complaining that the headers are defines outside
Included Files section and we have to duplicate the definitions
to the imported files to avoid build errors.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Sebastien Lorquet has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Alan Carvalho de Assis has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
David Sidrane has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
David S. Alessio has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Since the original stm32l4 version of this code already has an ASF
license header do that for stm32l5, too.
Apply latest changes to stm32l4_spi.c to stm32l5_spi.c as well.
Update stm32l5/Kconfig to allow selection of SPI1/2/3.
Signed-off-by: Michael Jung <mijung@gmx.net>
The LSE crystal oscillator driving strength can only be decreased to the
lower drive capability (LSEDRV = 00b) once the LSE is running, but not
to any other drive capability. Instead of letting the user select a
value between 0 and 3 and then failing the build if the selected value
was not 0, make it a boolean option.
Signed-off-by: Michael Jung <mijung@gmx.net>
Ported from stm32f7/h7: If configured this way, ramp-up the LSE crystal
oscillator driving strength until the LSE starts up.
Signed-off-by: Michael Jung <mijung@gmx.net>
Because a thread of gnss receiver is created by pthread in the
AppBringUp task, the thread would be killed when AppBringUp
task exits.
Change to use kthread_create instead of pthread_create to prevent
this issue.
cxd56_gnss.c uses file descriptor operation from next change.
0536953 Kernel module should prefer functions with nx/kmm prefix
But this change need to add fcntl.h in include header.
So, add missing header.
As proposed by David Sidrane. Required drive strength is board specific
and should be defined in the respective board.h file.
Signed-off-by: Michael Jung <mijung@gmx.net>
Architecture support for STMicroelectronics STM32L552xx and STM32L562xx
MCUs. This is based on corresponding code for STM32L4, but has been
considerably adjusted. Tested with Nucleo-L552ZE-Q and STM32L562E-DK
boards with simple NSH configurations.
Signed-off-by: Michael Jung <mijung@gmx.net>
Alan Carvalho de Assis has submitted the SGA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
mmcsd:Remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32h7:sdmmc remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32f7:sdmmc remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32f7:sdmmc WRITE COMPLETE prevent false triggers
stm32h7:sdmmc WRITE COMPLETE prevent false triggers
While testing PR #2989 on the H7 I noticed that the cards
were staying in 1-bit mode. The root cause was that the
scr read path was using DMA without an invlidate.
This was caused by CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT,
but the sdmmc driver, did not use the delayed invalidate
nor would it work on 8 bytes.
The driver fully supported dcache mgt on runt buffers, but
the #ifdef CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT blocked it.
Reviewing the PR that added CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
it may have been valid at the time. But after the dcache operations
we fixed. It is not necessary and offers no benefit.
