These warnings fix a class of warnings that I saw during CI checks for macOS sim builds. For example:
devif/devif_callback.c:111:49: warning: for loop has empty body [-Wempty-body]
prev = curr, curr = curr->nxtdev);
^
devif/devif_callback.c:111:49: note: put the semicolon on a separate line to silence this warning
I did not put the semi-colon on a separate line, but used braces.
1.Consolidate absolute to relative timeout conversion into one place(_net_timedwait)
2.Drive the wait timeout logic by net_timedwait instead of devif_timer
This patch help us remove devif_timer(period tick) to save the power in the future.
Change-Id: I534748a5d767ca6da8a7843c3c2f993ed9ea77d4
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>
Ran nxstyle against many of the affected files. But this job was too big for today. Many of the network drivers under arch are highly non-compiant and generate many, many faults from nxstyle. Those will have to be visited again another day.
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
This effects all network drivers as well as timing related portions of net/: devif_poll_tcp_timer shouldn't be skipped in the multiple card case. devif_timer will be called multiple time in one period if the multiple card exist, the elapsed time calculated for the first callback is right, but the flowing callback in the same period is wrong(very short) because the global variable g_polltimer is used in the calculation. So let's pass the delay time to devif_timer and remove g_polltimer.
net/icmpv6/icmpv6_input.c: Correct caculation of the ICMPv6 header address
net/mld/mld_query.c: Correct back test for group found.
net/mld/mld_report.c: Fix host vs. network order problem.
net/mld/mld_send.c: Correct the address used in sending the General Query. It should be the unspecified address in that case.
net/mld: Querying workaround. The MLD implementation does not follow the RFC correct when it is the Querier. The Querier should use a general query and get query messages from all members of all groups. This would be driven by a single timer since all groups are queried at once. Instead, the design currently uses a Multicast Address Specific Query with one timer per group and ignores groups that we are not members of.
net/mld: Checksum calculation needs to know the full size of the IPv6 header, including the size of the extension headers. The payload size in the IPv64 header must include the extension headers (not considered part of the header in this case). Fixes a few additional errors in size, endian-ness and checksum calculations. Wireshark now reports the the outgoing Report has a good checksum.
net/mld/mld_query.c: Add a cast to assure that the left shift does not overflow.
include/nuttx/net/ipv6ext.h: Fix some terminology: Hop-by-hop, not Hop-to-hop or Hop2hop.
net/devif/ipv6_input.c and net/icmpv6/icmpv6_input.c: Add logic to skiip over the variable number of IPv6 extension headers that may be present between the IPv6 header and the transport layer header. The extension headers are simply ignored. This is necessary because with MLD, certain incoming messages may have, at a mimimum, a Router Alert Hop-by-hop extension header.
net/inet/ipv6_setsockopt.c: Implement the IPV6_JOIN_GROUP and IPV6_LEAVE_GROUP socket options.
net/mld: The MLD logic now compiles and is much less toxic. It still is not a proper MLD implementation: (1) It is basically a port of IGMP, tweaked to work with IPv6 and ICMPv6 MLD messages, (2) it needs a proper analysis and comparison with RFC 3810, and (3) it is completely untested. For this reason, it will remain EXPERIMENTAL for some time.
net/mld: Add some missing macros, more fixes related to IPv6 vs IPv4 types,
net/mld: More compilation cleaning. Most fixups for IPv6 vs IPv4 types.
net/mld: Hook crudely converted .c files into build system and resolve a few of the many, many compilation/design problems.
net/mld: Add support for MLD statistics.
net/mld: Hook in MLD poll and packet transmission logic.
net/mld: Change references to IPv4 definitions to IPv6 definitions; Remove mld_input() since MLD piggybacks on ICMPv6 input. Add functions to catch MLD messages dispatched by ICMPv6 input logic.
net/mld: As a starting point, copy all net/igmp/*.c files to net/mld/. and change all occurrences of igmp (or IGMP) to mld (or MLD).
net/mld: More compilation cleaning. Most fixups for IPv6 vs IPv4 types.
net/mld: Hook crudely converted .c files into build system and resolve a few of the many, many compilation/design problems.
net/mld: Add support for MLD statistics.
net/mld: Hook in MLD poll and packet transmission logic.
net/mld: Change references to IPv4 definitions to IPv6 definitions; Remove mld_input() since MLD piggybacks on ICMPv6 input. Add functions to catch MLD messages dispatched by ICMPv6 input logic.
net/mld: As a starting point, copy all net/igmp/*.c files to net/mld/. and change all occurrences of igmp (or IGMP) to mld (or MLD).
Fixes logic in ipv6_input to handle more than ff02::/16 multicast addresses. Don't forward mcast packets if scope is not appropriate
Approved-by: GregoryN <gnutt@nuttx.org>
This makes the user interface a little hostile. People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header). A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length. Instead, we define the packet buffer size then derive the MTU.
The MTU is not common currency in networking. On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP). Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes. So we should be all good and without the recurring 14 byte error in MTU's and MSS's.
Squashed commit of the following:
Trivial update to fix some spacing issues.
net/: Rename several macros containing _MTU to _PKTSIZE.
net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE. This is not the MTU which does not include the size of the link layer header. This is the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename the file d_mtu in the network driver structure to d_pktsize. That value saved there is not the MTU. The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header. The MTU does not include the link layer header.
Squashed commit of the following:
sched: Rename all use of system_t to clock_t.
syscall: Rename all use of system_t to clock_t.
net: Rename all use of system_t to clock_t.
libs: Rename all use of system_t to clock_t.
fs: Rename all use of system_t to clock_t.
drivers: Rename all use of system_t to clock_t.
arch: Rename all use of system_t to clock_t.
include: Remove definition of systime_t; rename all use of system_t to clock_t.
Squashed commit of the following:
wireless/bluetooth: Some small changes that gets to a clean compile by just eliminating some incorrect implementations (still with a lot of warnings. The logic is still incomplete but now not so lethal.
wireless/bluetooth: Restructuring: Connection interfaces should internal to wireless/bluetooth. include/nuttx/wireless/bt_conn.h removed and merged with wireless/bluetooth/bt_conn.h. Several fix to get closer to bt_netdev.c compiling. Need to design some not interfaces and use some existing interfaces to send and receiv packets.
wireless/bluetooth: Some organization with some network device compile errors fixed. Still not even close to compiling.
net/bluetooth: Fix numerous compile issues; Still open design issues with regard to the interface with the Bluetooth stack.
wireless/bluetooth: Create bt_netdev.c with a crude copy of mac802154_netdev.c. Does not not even compile yet.
include/nuttx/net: Add bluetooth.h. Content is not yet correct.
net/netpackets: Add bluetooth.h. Update net/bluetooth to use new socket address definition.
net/bluetooth: Some fixes for initial build.
net/bluetooth: Add initial support for Bluetooth sockets. The initial cut is just the a clone of the IEEE 802.15.4 socket support with name changes.
net/ieee802154: Fix some typos noted when cloning to create net/bluetooth.
