Writes to MPFS_CFG_DDR_SGMII_PHY_EXPERT_DFI_STATUS_OVERRIDE register were not done properly. Use correct address for writes.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
When using IOB queue to store readahead data, we use one IOB for each
UDP packet. Then if the packets are very small, like 10Bytes per packet,
we'll use ~1600 IOBs just for 16KB recv buffer size, which is wasteful
and dangerous. So change conn->readahead to a single IOB chain like TCP.
Benefits:
- Using memory and IOBs more efficiently (small packets are common in
UDP)
Side effects:
- UDP recv buffer size may count the overhead
- A little bit drop in performance (<1%, more seek & copy)
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Reading the CSD field misses 3 bytes as the residual bytes
are not carried over properly. Fix this by adding the missing
bytes due to shifting.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
if client is a noblocking socket, user can do close when server has not yet
invoke accept interface, so we need remove this socket from server.lc_waiters.
avoid server socket access the freed memory.
==936564==ERROR: AddressSanitizer: heap-use-after-free on address 0xf23071c8 at pc 0x58eaac3b bp 0xf0b9e218 sp 0xf0b9e208
READ of size 4 at 0xf23071c8 thread T0
#0 0x58eaac3a in dq_remfirst queue/dq_remfirst.c:45
#1 0x58fd1efe in local_accept local/local_accept.c:141
#2 0x58f66df6 in psock_accept socket/accept.c:149
#3 0x58f672a4 in accept4 socket/accept.c:280
#4 0x5be9ee0c in accept net/lib_accept.c:50
#5 0x592d6a5d in uv__accept libuv/src/unix/core.c:502
#6 0x5930d83b in uv__server_io libuv/src/unix/stream.c:550
#7 0x592efbde in uv__io_poll libuv/src/unix/posix-poll.c:335
#8 0x592d649a in uv_run libuv/src/unix/core.c:387
#9 0x5a7180f7 in service_schedule_loop service/common/service_loop.c:146
#10 0x591f300b in pthread_startup pthread/pthread_create.c:59
#11 0x5be8134f in pthread_start pthread/pthread_create.c:139
#12 0x58ee2762 in pre_start sim/sim_initialstate.c:53
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
nuttx/drivers/sensors/wtgahrs2.c: In function ‘wtgahrs2_initialize’:
nuttx/drivers/sensors/wtgahrs2.c:545:22: warning: ‘%lx’ directive output may be truncated writing between 1 and 16 bytes into a region of size 14 [-Wformat-truncation=]
545 | snprintf(arg1, 16, "0x%" PRIxPTR, (uintptr_t)rtdata);
| ^~~~~
nuttx/drivers/sensors/wtgahrs2.c:545:25: note: format string is defined here
545 | snprintf(arg1, 16, "0x%" PRIxPTR, (uintptr_t)rtdata);
nuttx/drivers/sensors/wtgahrs2.c:545:22: note: directive argument in the range [1, 18446744073709551615]
545 | snprintf(arg1, 16, "0x%" PRIxPTR, (uintptr_t)rtdata);
| ^~~~~
nuttx/drivers/sensors/wtgahrs2.c:545:3: note: ‘snprintf’ output between 4 and 19 bytes into a destination of size 16
545 | snprintf(arg1, 16, "0x%" PRIxPTR, (uintptr_t)rtdata);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
According to the ARMv7a/r/m and ARMv8m architecture manuals
The allowed values are
0 Data or unified cache.
1 Instruction cache.
"One CCSIDR is implemented for each cache that can be accessed by the processor. CSSELR selects which Cache Size ID Register is accessible, see c0, Cache Size Selection Register (CSSELR)."
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
you can debug nuttx through any transport layer (serial port, network etc.),
currently supports the following functions:
1. Read and write registers
2. Read and write memory
3. Switch thread and read stack information
Future support plans:
1. Support breakpoint, watch point (requires architecture support).
related information:
https://sourceware.org/gdb/onlinedocs/gdb/Remote-Protocol.html
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
3 wire interface for ST7789 LCD controller does not use CMD/DATA pin to
specify whether data or command is send but uses 9th bit of SPI transfer.
This commit adds support for 3 wire interface to ST7789 controller.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
use workqueue for rpmsgdev poll notify to prevent
calling rpmsgdev_poll_cb in interrupt context which
will try to hold mutex in rpmsg_send
Signed-off-by: liaoao <liaoao@xiaomi.com>