Restore the checks which got completely broken by the following change.
```
commit 15142a8b10
Author: anjiahao <anjiahao@xiaomi.com>
Date: Fri Apr 1 16:20:03 2022 +0800
modlib/modlib_bind:fix unsigned_compare with zero
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
```
The jump instruction relocation had an assert that tests for jumps with
an offset of 0. This makes it so that a while(1); statement causes an
assert because the jump instruction points to the same address, which
is perfectly legal.
Addend was not handled correctly in several reloc types.
Add ADD32/64 + SUB32/64 relocations, for some reason the compiler
I use likes to add them.
each invocation of va_start() must be matched by a corresponding
invocation of va_end() in the same function
Signed-off-by: chao.an <anchao@xiaomi.com>
After check the official specification of ARM ISA
and Thumb ISA, the arch_setjmp_thumb.S are written
by arm unified assembly language,
so it easy to make it works for ARM and thumb ISA.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Error: module/mod_insmod.c:203:3: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
203 | strncpy(modp->modname, modname, MODLIB_NAMEMAX);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wqueue/kwork_thread.c: In function 'work_start_lowpri':
Error: wqueue/kwork_thread.c:212:22: error: '%lx' directive output may be truncated writing between 1 and 16 bytes into a region of size 14 [-Werror=format-truncation=]
212 | snprintf(args, 16, "0x%" PRIxPTR, (uintptr_t)wqueue);
local/local_sockif.c: In function 'local_getsockname':
Error: local/local_sockif.c:392:11: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
392 | strncpy(unaddr->sun_path, conn->lc_path, namelen);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
chip/esp32_wifi_utils.c: In function 'esp_wifi_scan_event_parse':
Error: chip/esp32_wifi_utils.c:373:37: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
memset(ap_list_buffer, 0x0, sizeof(ap_list_buffer));
^
stdio/lib_fputs.c: In function 'fputs':
Error: stdio/lib_fputs.c:99:9: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s == NULL || stream == NULL)
^
Error: stdio/lib_fputs.c:99:27: error: nonnull argument 'stream' compared to NULL [-Werror=nonnull-compare]
if (s == NULL || stream == NULL)
^
stdio/lib_vfprintf.c: In function 'vfprintf':
Error: stdio/lib_vfprintf.c:40:6: error: nonnull argument 'stream' compared to NULL [-Werror=nonnull-compare]
if (stream)
^
string/lib_strdup.c: In function 'strdup':
Error: string/lib_strdup.c:39:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
string/lib_strndup.c: In function 'strndup':
Error: string/lib_strndup.c:56:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
string/lib_strpbrk.c: In function 'strpbrk':
Error: string/lib_strpbrk.c:39:7: error: nonnull argument 'str' compared to NULL [-Werror=nonnull-compare]
if (!str || !charset)
^~~~
Error: string/lib_strpbrk.c:39:15: error: nonnull argument 'charset' compared to NULL [-Werror=nonnull-compare]
if (!str || !charset)
^~~~~~~~
string/lib_strrchr.c: In function 'strrchr':
Error: string/lib_strrchr.c:40:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
Error: time/lib_asctimer.c:73:50: error: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 12 [-Werror=format-truncation=]
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~
time/lib_asctimer.c:73:21: note: directive argument in the range [-2147481748, 2147483647]
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
time/lib_asctimer.c:73:3: note: 'snprintf' output between 17 and 68 bytes into a destination of size 26
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
g_wday_name[tp->tm_wday], g_mon_name[tp->tm_mon],
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tp->tm_mday, tp->tm_hour, tp->tm_min, tp->tm_sec,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1900 + tp->tm_year);
~~~~~~~~~~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- In case of BUILD_KERNEL, NuttX uses USR mode sp and SVC mode sp.
- The kernel runs on SVC mode sp.
- While the kernel is running, up_getsp() cannot get the TLS address.
- The kernel requires tls_get_info() function.
- For the user land, up_getsp() can be used.
- tls_getinfo.c is always compiled and tls_get_info() function is
filtered by macros in the tls_getinfo.c.
Impact:
BUILD_KERNEL
Testing:
test program on custom Cortex-A9 board (BUILD_KERNEL)
ostest on sabre-6quad:smp (QEMU, BUILD_FLAT)
Signed-off-by: Oki Minabe <minabe.oki@gmail.com>
Summary:
- This commit adds thumb support to i.MX6
- Also, applies the same coding style to arch_elf.c
Impact:
- i.MX6 only
Testing:
- Tested with sabre-6quad:smp (QEMU, Dev board)
- Tested with sabre-6quad:netnsh (QEMU)
- Tested with sabre-6quad:netknsh (QEMU, not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds thumb support to arch_elf.c
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh (QEMU, not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
here is the reason:
1.clock_systime_timespec(core function) always exist regardless the setting
2.CLOCK_MONOTONIC is a foundamental clock type required by many places
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The angle observer always refer to a motor electrical angle,
while the speed observer can be applied to a motor electrical speed or a motor mechanical speed.
They can be used completely independently, so they should'n be coupled.
For example, a sensored motor controller in speed control mode doesn't need an angle estimator.
Add a list in TCB to track all semphores the task held, so we
can release all holders when exit, so nxsched_verify_tcb
is unnecessary.
Signed-off-by: Zeng Zhaoxiu <walker.zeng@transtekcorp.com>
follow up the following change:
commit 4262b09cbf
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Fri Dec 17 02:58:49 2021 +0800
libc: Implement terminal api regardless of CONFIG_SERIAL_TERMIOS setting
since many functions aren't related to termios directly
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
includes following parts:
add support of sparc in arch/Kconfig
add support of sparc in boards/Kconfig
add sparc dir in arch, add sparc dir in boards
add support of sparc in libs/libc/machine
modify all the coding style problem about saprc
Probably this is a bug of a GCC, but on AMRv7 the code "if (relax_factor > 1)"
generates "bne.n" instruction if "relax_factor" is "int". Few lines above
"relax_factor *= LOG_RELAX_MULTIPLIER;" is done without overflow check hence
at some moment overflow occurs and "relax_factor" becomes a zero and condition
"if (relax_factor > 1)" becomes always evaluated to "true" hence "epsilon"
becomes zero always.
Probably this is not the best way to fix the bug (The best way is to report it
to GCC), but this change allows to get correct behavior of "log" and "logf" for
ARMv7 based MCUs
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
commit e1c306f2dd added sethostname using
strncpy. This replaces it with strlcpy and uses sizeof() instead of
re-calculating the buffer size.
Rename size argument for get/sethostname to match the implementation
- textdomain should set errno to ENOMEM in case if it is not
possible to store domainname
- fix buffer overflow in textdomain if domainname is a string
of NAME_MAX length
- improve textdomain error detection in case if domainname
points to non null terminated buffer
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
For CEVA platform CHAR_BIT is 16, and will do lots of extra work
when use IPC.
We will not support this platform anymore, so remove all the b2c operations.
Signed-off-by: ligd <liguiding1@xiaomi.com>
Show a '%p' thing. A nuttx extension is that the '%p' is followed
by an extra set of alphanumeric characters that are extended format
specifiers.
* - 'S' For symbolic direct pointers (or function descriptors) with offset
* - 's' For symbolic direct pointers (or function descriptors) without offset
printf("%ps %pS\n", ptr, ptr) will print:
module_start module_start+0x0/0x62
Signed-off-by: chao.an <anchao@xiaomi.com>
let the nuttx print out symbolic crash information and
symbolic stack backtraces. This increases the size of the nuttx
somewhat, as all symbols have to be loaded into the nuttx image.
Signed-off-by: chao.an <anchao@xiaomi.com>
argv is allocated from stack and then belong to userspace,
so task_info_s is a best location to hold this information.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Gregory Nutt has submitted the SGA
Haltian Ltd has submitted the SGA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This fixes busylooping in work_usrthread, due to incorrect time spec given to sem_timedwait
_SEM_TIMEDWAIT works on absolute time stamps, using CLOCK_REALTIME
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
aio/lio_listio.c:227:7: warning: implicit declaration of function ‘ferr’ [-Wimplicit-function-declaration]
227 | ferr("ERROR: lib_zalloc failed\n");
| ^~~~
aio/lio_listio.c:275:3: warning: implicit declaration of function ‘finfo’ [-Wimplicit-function-declaration]
275 | finfo("Registering signal handler\n");
aio/aio_read.c: In function ‘aio_read_worker’:
aio/aio_read.c:90:11: warning: implicit declaration of function ‘file_pread’; did you mean ‘aio_read’? [-Wimplicit-function-declaration]
90 | nread = file_pread(aioc->aioc_filep, (FAR void *)aiocbp->aio_buf,
| ^~~~~~~~~~
| aio_read
aio/aio_write.c: In function ‘aio_write_worker’:
aio/aio_write.c:85:12: warning: implicit declaration of function ‘file_fcntl’ [-Wimplicit-function-declaration]
85 | oflags = file_fcntl(aioc->aioc_filep, F_GETFL);
| ^~~~~~~~~~
CC: mmap/fs_mmap.c
CC: pthread/pthread_condclockwait.c
aio/aio_write.c:107:18: warning: implicit declaration of function ‘file_write’; did you mean ‘aio_write’? [-Wimplicit-function-declaration]
107 | nwritten = file_write(aioc->aioc_filep,
| ^~~~~~~~~~
| aio_write
aio/aio_write.c:113:18: warning: implicit declaration of function ‘file_pwrite’; did you mean ‘aio_write’? [-Wimplicit-function-declaration]
113 | nwritten = file_pwrite(aioc->aioc_filep,
| ^~~~~~~~~~~
| aio_write
In file included from aio/aio_write.c:34:
aio/aio_write.c:121:12: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
121 | ferr("ERROR: write/pwrite/send failed: %d\n", nwritten);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~
| |
| ssize_t {aka long int}
aio/aio_write.c:121:47: note: format string is defined here
121 | ferr("ERROR: write/pwrite/send failed: %d\n", nwritten);
| ~^
| |
| int
| %ld
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This reverts commit 3724f6be55.
Because there is no real correlation between DNS namesize and NAME_MAX
as far as I know. The former is about network and the latter is about
filesystem. While they might happen to be similar values for
some configurations, it's very confusing to use them this way.
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
Paul Alexander Patience has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
It is okay for the application to be built without RTTI (-fno-rrti), but
libcxxabi requires RTTI at least for the library.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
