sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3,549 Commits 1 Branch 0 Tags 291 MiB
20b5980828
Commit Graph

3544 Commits

Author SHA1 Message Date
Gregory Nutt
f4746a3e9e Fix BAS configuration from last change; refresh STM32 F4 NSH configuration 2014-11-24 09:12:56 -06:00
Gregory Nutt
121aa0ca68 Update comments and README 2014-11-24 07:25:40 -06:00
Gregory Nutt
5ead6b402d Network: Misc changes to UDP bind logic for the case of multiple networks 2014-11-21 17:00:08 -06:00
Gregory Nutt
5055d00caf Update READMEs 2014-11-21 14:05:20 -06:00
Gregory Nutt
12a9937913 apps/examples/bridge: Lots of fixes. I think it is working although I have still have host firewall issues in testing 2014-11-21 10:16:19 -06:00
Gregory Nutt
2f972d2781 apps/examples/bridge: Add host-side test driver 2014-11-21 08:20:25 -06:00
Gregory Nutt
7cea0f5a69 SAMA5D3 Xplained: Add an apps/examples/bridge configuration 2014-11-20 16:24:30 -06:00
Gregory Nutt
972b11d462 Update README 2014-11-20 14:18:30 -06:00
Gregory Nutt
4683ad7843 Refresh STM32F429i Disco USB NSH configuration 2014-11-20 07:55:30 -06:00
Gregory Nutt
13332e41d2 STM32 F4 OTGHS device controller driver from Brennan Ashton 2014-11-20 07:19:04 -06:00
Gregory Nutt
4dea8ef794 Freedom K25Z: Fix missing file inclusion in board Makefile. From Alan Carvalho de Assis 2014-11-19 07:17:46 -06:00
Gregory Nutt
471f2bd1b5 Update README 2014-11-18 14:28:27 -06:00
Gregory Nutt
2803545ebc SAM EMAC: Fix typo in the check for successfull allocation of a timer 2014-11-18 14:20:31 -06:00
Gregory Nutt
726af630e2 SAMA5D4-EK bridge configuration: Correct configuration -- PHY interfaces are RMII not MII 2014-11-17 17:44:49 -06:00
Gregory Nutt
cb11af9112 Due to limitations in port unique-ness, have to use unique port numbers in apps/examples/bridge for now 2014-11-17 15:40:37 -06:00
Gregory Nutt
b6b4a0cd37 SAMA5D4-EK bridge configuration needs to set software MAC address 2014-11-17 13:16:13 -06:00
Gregory Nutt
16cd0cce81 Update ChangeLog 2014-11-17 12:48:01 -06:00
Gregory Nutt
c0c86da44c Change SAMA5D4-EK bridge configuration so that runs out of DRAM 2014-11-17 12:03:40 -06:00
Gregory Nutt
b3b746c44a configs/sama5d4-ek/bridge: Add a simple test for the dual EMACs on the SAMA5D4 2014-11-17 10:56:02 -06:00
Gregory Nutt
e3920b130f changes for clean build with Ethernet+SLIP 2014-11-16 11:27:53 -06:00
Gregory Nutt
3715040386 Change CONFIG_NET_RECEIVE_WONDOW to CONFIG_NET_ETH_TCP_RECVWNDO or CONFIG_NET_SLIP_TCP_RECVWNDO in all defconfig files 2014-11-16 10:49:33 -06:00
Gregory Nutt
07a74c3cfd Refresh configuration 2014-11-16 09:36:08 -06:00
Gregory Nutt
66f49ae9b4 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU in all configs/ README.txt files 2014-11-16 08:18:56 -06:00
Gregory Nutt
fa0512a766 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all configuration files 2014-11-16 08:07:16 -06:00
Gregory Nutt
127642d676 Network: Update SLIP configuration; Fix compile issues when building SLIP only 2014-11-15 14:36:49 -06:00
Gregory Nutt
adb497959d STM32F4Discovery netnsh configuration needs to set MAC address 2014-11-15 08:32:12 -06:00
Gregory Nutt
b0fa0a0b98 Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
f4e696f10f ARP: Add support for the case where there are multiple networks: One being Etherenet and the other not (say slip or perhaps someday PPP). In that case, we need to suppress ARP-related operations on the SLIP/PPP interface only 2014-11-14 18:25:33 -06:00
Gregory Nutt
1bae6f4d60 Cosmetic updates; updates to README 2014-11-14 09:54:00 -06:00
Gregory Nutt
dd2fdcb18f EFM32GG-STK3700: Increase LEUART0 baud to 9600; Calibrate delay loop 2014-11-14 06:33:54 -06:00
Gregory Nutt
113c7f25ba merge 2014-11-13 08:43:53 -06:00
Gregory Nutt
39d1e97934 Refresh configuration 2014-11-13 08:40:11 -06:00
Gregory Nutt
d25a3ec157 Update configuration 2014-11-13 08:08:50 -06:00
Gregory Nutt
22ebb20b79 Merge remote-tracking branch 'origin/master' into maxargs 2014-11-13 06:12:20 -06:00
Gregory Nutt
f31dca368b Remove CONFIG_MAX_TASK_ARGS from all Kconfigs and defconfigs 2014-11-12 18:02:19 -06:00
Gregory Nutt
dd03c11874 Update document and README 2014-11-12 14:47:04 -06:00
Gregory Nutt
43281776fe EFM32: Tweaks to get EFM32GG-STK3700 running NSH over LEUART0 2014-11-12 12:50:09 -06:00
Gregory Nutt
2a48a29385 Updates the px4fmu-v2_upstream config using menuconfig. From Lorenz Meier. 2014-11-12 07:38:16 -06:00
Gregory Nutt
1381705258 Update README files 2014-11-11 09:36:33 -06:00
Gregory Nutt
a66a10b891 Refresh configuration 2014-11-10 13:43:43 -06:00
Gregory Nutt
46e45619c0 Remove stm32f100rc_generic board configuration 2014-11-10 07:48:48 -06:00
Gregory Nutt
ed4978da54 Merge remote-tracking branch 'origin/master' into bas24 2014-11-03 17:22:38 -06:00
Gregory Nutt
99d9a10943 STM32GG Starter Kit: Misc bugfixes for clean compile of the NSH configuration 2014-11-03 17:20:03 -06:00
Gregory Nutt
e94aa0558f STM32GG Starter Kit: Add basic NSH configuration 2014-11-03 16:58:22 -06:00
Gregory Nutt
b2755708bc STM32GG Starter Kit: Add Makefile and boot logic 2014-11-03 16:26:55 -06:00
Gregory Nutt
cfbad6f5d8 STM32GG Starter Kit: Add Kconfig and linker script files 2014-11-03 16:22:29 -06:00
Gregory Nutt
92b6c8f325 EFM32GG: Add a few files for the starter kit 2014-11-03 16:13:12 -06:00
Gregory Nutt
b6a6fa7d37 Disable BINFS in the sim/bas config 2014-11-01 17:44:55 -06:00
Gregory Nutt
e27d0bb3dc Remove duplicate getopt() in BAS 2014-11-01 17:16:15 -06:00
Gregory Nutt
bf5d46e746 New version of configs/bas: Runs BAS as an NSH builtin 2014-11-01 16:23:51 -06:00
Gregory Nutt
c19f430632 Back out configs/sim/bas 2014-11-01 15:52:08 -06:00
Gregory Nutt
e4007b7147 Add configs/sim/bas 2014-11-01 15:26:41 -06:00
Gregory Nutt
9fd42cdcfc Update document and README 2014-10-30 10:24:42 -06:00
Gregory Nutt
aed8195155 Fix all yahoo links. From Magnus Templing 2014-10-30 09:39:23 -06:00
Gregory Nutt
adb022054b Fix typo introduced into a Kconfig file in the last few days. Thanks to Sebastien Lorquet 2014-10-30 08:18:58 -06:00
Gregory Nutt
138114dfd5 Remove some dangling whitespace 2014-10-30 06:57:43 -06:00
Gregory Nutt
6090a5a461 Documentation Update 2014-10-30 06:56:30 -06:00
Gregory Nutt
8247bf3e1c SAM4E-EK: Fix an error in USART1 pin number 2014-10-29 17:29:21 -06:00
Gregory Nutt
627e6301e0 EFM32 Gecko Starter Kit: Calibrate delay loops, update README 2014-10-29 12:31:55 -06:00
Gregory Nutt
33f454a011 EFM32 Gecko Starter Kit: Switch to LEUART0 as the default console 2014-10-29 11:43:03 -06:00
Gregory Nutt
e97ef669ed EFM32: Minor serial interrupt mask change; Add LEUART0 board support 2014-10-29 08:04:29 -06:00
Gregory Nutt
714464405d Fix a few more EFM32 integration bugs 2014-10-28 19:02:21 -06:00
Gregory Nutt
2326ea0307 EFM32: Need to configure UART GPIOs as outputs 2014-10-28 14:50:15 -06:00
Gregory Nutt
f8b2f291b4 EFM32: Fix GPIO configuration logic; Add missing board initializatin logic; Fix LED naming 2014-10-28 10:39:57 -06:00
Gregory Nutt
a839463322 EFM32G: Fix typo in memory map header file 2014-10-28 09:26:06 -06:00
Gregory Nutt
8595f421ee EFM32: Correct a typo in LFXO bit in clock configuration 2014-10-28 08:59:27 -06:00
Gregory Nutt
89605a5e78 EFM32: Update a configuration; Compile fix for when DEBUG is enabled 2014-10-28 07:24:04 -06:00
Gregory Nutt
4c36103407 Refresh a configuration 2014-10-28 00:11:40 -06:00
Gregory Nutt
afe6c95da3 Refresh configuration 2014-10-27 13:12:19 -06:00
Gregory Nutt
dd4d482fe2 Rename CONFIG_STM32_HAVE_USARTn to CONFIG_STM32_HAVE_UARTn for n-4,5,7,8 2014-10-27 11:29:43 -06:00
Gregory Nutt
854dbb7d65 SAM4E-EK: Add -fno-strict-aliasing 2014-10-25 15:23:14 -06:00
Gregory Nutt
6c03fd7ad1 EFM32: Correct handling of DMA descriptors; Add initialization of DMA CTRLBASE 2014-10-25 14:55:02 -06:00
Gregory Nutt
b629ab2862 SAM4E-EK: Add support for PHY insterrupt 2014-10-24 12:28:57 -06:00
Gregory Nutt
a4dde0c527 Kconfig: Allow select of standard board properties for custom board 2014-10-24 09:57:32 -06:00
Gregory Nutt
e315a6d500 SAM4E: Fix options to select GPIO interrupts in Kconfig 2014-10-24 09:29:01 -06:00
Gregory Nutt
8712d1115c Refresh SAM4E configurations 2014-10-23 10:16:00 -06:00
Gregory Nutt
bdbe5393e1 Add README for non-existent port to the EFM32GG-STK3700; fix typos in related README files 2014-10-22 14:32:25 -06:00
Gregory Nutt
ef4a649372 Add logic to manage BC_EN signal 2014-10-22 14:27:05 -06:00
Gregory Nutt
33015d6018 EFM32: Add buton interrupt handling for the Olimex board 2014-10-21 13:51:30 -06:00
Gregory Nutt
b8d841c9d2 The olimex-efm32g880f128-stk now defaults to use LEUART1 as the serial console. Also fixes lots of compile bugs from the original LEUART checkin 2014-10-21 11:38:51 -06:00
Gregory Nutt
d39eb3ade7 EFM32: Add LFA and LFB clock support 2014-10-21 10:45:33 -06:00
Gregory Nutt
c688cda22a stm32f429i-disco: add wrapper for spi5 evice 
initializing

As long as the method up_spiinitialize recognized the initialized state of the
spi device by the spi enable flag of the cr1 register, it isn't safe to disable
the spi device outside of the nuttx spi interface structure. But this has to be
done as long as the nuttx spi interface doesn't support bidirectional data
transfer for multiple devices share one spi bus. This wrapper store the
initialized state of the spi device after the first initializing and should be
used by each driver who shares the spi5 bus.

Note! Understand this as temporary workaround.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:36:11 -06:00
Gregory Nutt
4c470720d0 stm32f429i-disco: add new platform config 
This adds a new default platform configuration to support the lcd device
connected to the stm32f429i-disco board.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:33:25 -06:00
Gregory Nutt
bf4ad09e6e stm32f429i-disco: enable usage of ili93414ws 
This enables build and configuration of the ili94314ws sub driver.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:24:24 -06:00
Gregory Nutt
e597d07d42 stm32f429i-disco: implements lcd initializing 
This enables the initializing of the lcd device connected on the
stm32f429i-disco. The following methods are provided:
- up_lcdinitialize
- up_lcduninitialize
- up_lcdgetdev

The corresponding ili9341 lcd device in the nuttx driver section can be
configured by Kconfig. Interface 0 is used by default.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:21:48 -06:00
Gregory Nutt
f02de7c7ec stm32f429i-disco: implements ili9341 interface 
This add a new sub driver ili93414ws which implements the ili9341
interface. This allows to control the ili9341 lcd display of the
stm32f429i-disco board. This also modifies the board specific header to
make the entry point to the sub driver known.

Generally the display supports two different ways to drawing pixel data. This
can be done by RGB interface or MCU interface. Second one is supported by this
driver.

The configuration of the MCU interface is fixed by the hardware pinout.
In the case of the stm32f429i-disco board it is a 4-wire serial (spi)
interface. The display is connected on spi5 and acts as a slave device.
It supports half duplex bidirectional mode for transmitting and receiving data.

Nuttx spi interface only support full duplex so the interface can not be used
for the driver in conventional way. Therefore the driver has its own logic for
the communication with the spi5 device.

But if multiple devices share the same spi5 bus, e.g. if MEMS support enabled
the spi bus must be locked to avoid inconsistency. This is done by enable
CONFIG_STM32_SPI5 in the nuttx configuration. In this case the driver uses the
spi_dev_s instance for the spi5 port to interact with the nuttx spi interface,
e.g. using method SPI_LOCK to lock the bus for the current usage. So it is safe
to share the spi bus. Keep in mind this is a possible workaround.
I would be happy if nuttx spi interface supports different spi modes other
than full duplex only. Are there any plans?

Futhermore the driver supports a few configurable settings:

1. SPI Frequency.

This allows to configure the spi frequency for the communication with the
display. As a result of the spi devices of the stm32f429 only allow fixed
frequency by divider depending on PCLK1, it is not possible to configure each
spi clock we want. A divider of 4, what means ~10Mhz spi clock, gives me the
best results and should be near the upper limit.

2. SPI 16-bit mode.

This allows to setup the spi hardware to 16-bit mode for read or write
operations when receiving or transmitting pixel data from or to the gram of the
display. This is not documented in the ili9341 reference manual but this trick
works just fine because we use only one read or write operation for each pixel,
instead two. This gives a small performance boost.

The driver implements all functions described in the header (see
include/nuttx/lcd/ili9341.h).
Note! Using the backlight function has no effect, because the board
doesn't support controlling of the backlight in the current hardware
layout.

Todo: Add support for dma transfer for writing pixel data to the displays gram.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:17:56 -06:00
Gregory Nutt
3035f1a88f stm32f429i-disco: Fix obsolete SPI5 dependency. From Marco Krahl 2014-10-20 15:10:50 -06:00
Gregory Nutt
94f5d3427d Update README files 2014-10-20 15:08:35 -06:00
Gregory Nutt
468b004fcb Add board support for the Olimex EFM32G8809128 STK 2014-10-20 12:00:37 -06:00
Gregory Nutt
fbaa55e416 EFM32 Gecko Starter Kit: Must initialize LEDs on boot 2014-10-20 11:52:31 -06:00
Gregory Nutt
ea3024c529 Merge branch 'efm32' 2014-10-20 08:15:53 -06:00
Gregory Nutt
180c0e9dec Add some UART configuration logic (still incomplete) 2014-10-19 16:42:15 -06:00
Gregory Nutt
4d6f0a7708 Basic clock configuration logic 2014-10-19 11:08:56 -06:00
Gregory Nutt
17403fe074 Add frame for EFM32 GPIO logic (empty functions) 2014-10-18 18:40:08 -06:00
Gregory Nutt
5842b5d705 Need to enable the standard serial driver for NSH 2014-10-18 16:15:14 -06:00
Gregory Nutt
192ef77d68 Use UART0 for the serial console 2014-10-18 12:47:45 -06:00
Gregory Nutt
d707a29c35 Add board XTAL definitions 2014-10-18 12:07:34 -06:00
Gregory Nutt
d359e4bf3f Add EFM32 CMU header file 2014-10-18 09:26:56 -06:00
Gregory Nutt
b327a408a4 Add EFM32 Memory Maps 2014-10-17 16:43:52 -06:00
Gregory Nutt
fcdc23a6a7 Add GPIO header file and EFM32 Gecko Starter Kit LED support 2014-10-17 14:17:44 -06:00
Gregory Nutt
cee68cc44e More EFM32 files and logic 2014-10-17 12:02:32 -06:00
Gregory Nutt
84f26a3d07 Add EFM32 interrupt vector defintions 2014-10-17 10:34:39 -06:00
Gregory Nutt
b41dd463f2 Add configuration support for the EFM32 Gecko Starter Kit 2014-10-17 09:25:52 -06:00
Gregory Nutt
df822a66c2 Add directory for EFM32 G8XX STK board 2014-10-17 08:43:06 -06:00
Gregory Nutt
f80182aea1 Typo 2014-10-17 08:37:59 -06:00
Gregory Nutt
2583c3bf0b Update README 2014-10-15 07:27:54 -06:00
Gregory Nutt
f977d8d2eb Rename configs/nucleo-f401re to configs/nucleo-f4x1re 2014-10-15 07:05:08 -06:00
Gregory Nutt
e525b020c9 Extend the Nucleo-F401RE configuration to also support the Nucleo-F411RE. From Serg Podtynnyi 2014-10-14 17:32:13 -06:00
Gregory Nutt
d19e70b73a Trivial update to README file 2014-10-13 12:05:49 -06:00
Gregory Nutt
d4f28e4721 Add SAM4E OpenOCD scripts 2014-10-13 09:48:46 -06:00
Gregory Nutt
21b757e62e Cosmetic update to comments 2014-10-12 10:53:29 -06:00
Gregory Nutt
541105fe5f Update STM3240G-EVAL nxwm and knxwm configurations 2014-10-12 09:41:08 -06:00
Gregory Nutt
ca57ef9fac Change naming of HP work queue configuration varaibles to be symmetric with LP work queue naming 2014-10-11 17:03:44 -06:00
Gregory Nutt
340811b452 Refresh configuration 2014-10-11 16:26:46 -06:00
Gregory Nutt
4ad13d380f Rename CONFIG_SCHED_USRWORK to CONFIG_LIB_USRWORK 2014-10-11 15:59:40 -06:00
Gregory Nutt
f1212bf8e9 Decouple the user-space work queue from the kernel space work queues 2014-10-11 15:50:22 -06:00
Gregory Nutt
d11ffb4f9c Enable TCP write buffering in one SAM4E-EK configuration 2014-10-11 13:03:07 -06:00
Gregory Nutt
36149a46b4 Update a README; Refresh a configuratino 2014-10-11 12:01:33 -06:00
Gregory Nutt
d6f0bde9d2 fs/aio/aio.h needs to disable itself is CONFIG_FS_AIO is not defined 2014-10-09 10:45:43 -06:00
Gregory Nutt
857d0b8e76 Remove non-standard, conditional syslog_enable(), instead only the required, standard setlogmask() 2014-10-09 06:09:03 -06:00
Gregory Nutt
8c7cbcb48d Misc changes to get a clean build after all of the syslog changes. There are probably other things still broken 2014-10-08 16:23:48 -06:00
Gregory Nutt
2b77c9ceb9 Remaining files under nuttx/configs changed to use the corrected syslog interfaces 2014-10-08 15:32:00 -06:00
Gregory Nutt
2199c2b1fc All USB Composite-related files under nuttx/configs changed to use the corrected syslog interfaces 2014-10-08 15:13:00 -06:00
Gregory Nutt
a9fa023ae1 All USB MSC-related files under nuttx/configs changed to use the corrected syslog interfaces 2014-10-08 14:59:10 -06:00
Gregory Nutt
4d851b150d All NSH-related files under nuttx/configs changed to use the corrected syslog interfaces 2014-10-08 14:28:55 -06:00
Gregory Nutt
6a178608fb Remove non-functional vestiges of OTGHS in FS mode (including OTGFS2); try to convert the stm32f429i-disco configuration to use OTGHS instead of OTFHS in FS mode (OTGFS2). But I don't have the boards and can't test 2014-10-07 15:25:31 -06:00
Gregory Nutt
5507210dac Refresh sim/ostest configuration 2014-10-05 13:28:05 -06:00
Gregory Nutt
0e57b60cd1 Update README 2014-10-03 09:56:05 -06:00
Gregory Nutt
6030232354 configs/sim/nsh/defconfig -- refresh, enable wall-time, dow builds natively in 64-bit mode 2014-10-03 08:44:42 -06:00
Gregory Nutt
17582251f2 Cosmetic update to comments/README 2014-10-01 15:02:49 -06:00
Gregory Nutt
403d7f380b Update the TODO list and a README 2014-09-30 14:48:31 -06:00
Gregory Nutt
2248a20224 Repartition some message queue logic: sched/mqueue should have all mqueue knowledge; fs/mqueue should deal only with inodes 2014-09-30 08:03:39 -06:00
Gregory Nutt
bee22181f4 Fix some comments: Remove button description from GPIO interrupt handlers that derive from the button interrupt handler 2014-09-29 12:22:31 -06:00
Gregory Nutt
0cdd0bf667 Refresh STM32F4Discovery kosest configuration file 2014-09-29 08:00:51 -06:00
Gregory Nutt
9041a95605 STM32F4-Discovery: Fix some backwad conditional compilation 2014-09-29 06:49:55 -06:00
Gregory Nutt
091b11bfdf More testing, bugfixes and integration of VFS-based named semaphores 2014-09-28 17:30:42 -06:00
Gregory Nutt
edfa127034 Create a build structure that will (eventually) support using the VFS to manage named semaphores 2014-09-28 12:19:01 -06:00
Gregory Nutt
0e29e06524 Updated README.txt files 2014-09-27 09:50:07 -06:00
Gregory Nutt
5cd7f93173 Refresh configuration 2014-09-26 07:03:25 -06:00
Gregory Nutt
0256026199 Update README 2014-09-26 05:49:05 -06:00
Gregory Nutt
f3d3cafc46 Fixes for compile of rwbuffer.c 2014-09-25 11:02:30 -06:00
Gregory Nutt
d746eee6d7 Refresh sim/mtdpart configuration 2014-09-25 09:57:11 -06:00
Gregory Nutt
8712ae6e9e Trivial refresh of some SAMA5D4-EK configurations 2014-09-24 10:26:04 -06:00
Gregory Nutt
7939ff50d9 Move include/nuttx/mm.h to include/nuttx/mm/mm.h 2014-09-24 07:29:09 -06:00
Gregory Nutt
436b122544 Move include/nuttx/gran.h to include/nuttx/mm/gran.h 2014-09-24 06:55:26 -06:00
Gregory Nutt
7d9970d4f4 Add the build framework and skeleton files for the shared memory feature (no logic yet provided) 2014-09-22 14:53:56 -06:00
Gregory Nutt
d18d451ed6 Fix a few compile bugs and minor corrections to the mikroe-stm32f4 configuration source. From Ken Pettit 2014-09-22 11:23:02 -06:00
Gregory Nutt
5003b20d0d Document SAMA5D3x-EK/nxwm build problem 2014-09-20 17:20:10 -06:00
Gregory Nutt
099a00f098 More NxWM build fixes 2014-09-20 16:47:00 -06:00
Gregory Nutt
a52b6a005e Changes to get an NxWM configuration building correctly after all of the naming changes 2014-09-20 16:19:06 -06:00