sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
11,225 Commits 1 Branch 0 Tags 291 MiB
214aeeff57
Commit Graph

1367 Commits

Author SHA1 Message Date
Gregory Nutt
22fbcbb852 MXT driver is now at least partially functional 2014-07-09 18:56:53 -06:00
Gregory Nutt
e9362128bd SAMA5 TWI: Add support for up_i2creset 2014-07-09 09:51:28 -06:00
Gregory Nutt
0da9aaeb09 Fix some recurring typos: postion->position, *atino->*ation 2014-07-08 13:12:36 -06:00
Gregory Nutt
25f419d487 MXT Driver: Make sure that all return values are checked: Fix worker thread -- it must hold the MXT device semaphore to access I2C 2014-07-08 08:55:43 -06:00
Gregory Nutt
ab8506163a maXTouch: Fix some issues with interrupt handling 2014-07-07 13:25:20 -06:00
Gregory Nutt
5bbc0a0dd9 maXTouch: Check for successful memory allocation was backward 2014-07-07 09:55:39 -06:00
Gregory Nutt
0d14befb88 SAM3/4: Fix compile of sam_aes.c if CONFIG_CRYPTO_AES is defined. rom Max Nekludov 2014-07-07 08:03:18 -06:00
Gregory Nutt
dc7bcb0c1d BCH: Add configurable AES encryption support to block-to-character (BCH) driver. This allows any block device to be accessed as an encrypted character device. From Max Nekludov 2014-07-07 08:00:00 -06:00
Gregory Nutt
09d0e2bdd2 maXTouch: Be consistent. Failure return values are not just non-zero, but negative 2014-07-06 09:08:38 -06:00
Gregory Nutt
4afc23d16d maXTouch: Fix test of I2C_TRANSFER return value 2014-07-06 08:51:38 -06:00
Gregory Nutt
b4d3cebc2f maXTouch: Fix I2C address, errors when debug enable, reorganize some data 2014-07-06 08:03:34 -06:00
Gregory Nutt
c5fc24e110 NET: Standardize naming of all protocal header lengths 2014-07-05 13:04:48 -06:00
Gregory Nutt
c2fc299332 Forgot to add a file in the last commit 2014-07-05 11:57:03 -06:00
Gregory Nutt
3e9f29ba07 Add very basic support for the Atmel maXTouch touchscreen controller 2014-07-05 11:47:54 -06:00
Gregory Nutt
60246e613b NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
0bb153b8cb Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
a6b39d1879 NET: in-progress change... don't use 2014-07-04 16:38:51 -06:00
Gregory Nutt
cce35ce975 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
b732388fcb TSC2007: Cosmetic updates 2014-07-04 15:03:41 -06:00
Gregory Nutt
b36b29b4c3 SMARTFS: Increase some variables from uint16_t to uint32_t to handle larger device sizes. From Ken Pettit 2014-07-04 07:28:12 -06:00
Gregory Nutt
f881abe2da Fix for a bug that would show up if CONFIG_MTD_BYTE_WRITE was not selected and the SMART sector size was larger than the mtd device's block size (like it would be if using SMARTFS on larger flash devices). From Ken Pettit 2014-07-03 18:14:51 -06:00
Gregory Nutt
8e9df8ade0 NET: Misc naming clean-up 2014-07-02 17:23:25 -06:00
Gregory Nutt
400edda109 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
3b31e1ac80 SAMA5D4-EK: NSH configuration now has the RAMLOG enabled by default 2014-07-01 15:09:47 -06:00
Gregory Nutt
2630411332 RAMLOG: syslog_putc must set errno and return EOF on a failure 2014-07-01 15:09:07 -06:00
Gregory Nutt
3ee5b9209b Rename CONFIG_RAMLOG_CONSOLE_BUFSIZE to just CONFIG_RAMLOG_BUFSIZE 2014-07-01 12:00:40 -06:00
Gregory Nutt
77330679d4 NET: Rename uip_mss to tcp_mss 2014-06-30 19:09:23 -06:00
Gregory Nutt
b0c1b7ef47 Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
da7379ed18 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00
Gregory Nutt
dd8bb71cbc Remove empty ADC write method. From Kosma Moczek 2014-06-30 07:55:28 -06:00
Gregory Nutt
f1dcb6674a Extend erase block size to 18-bits in order (decrease block size to 14-bits) to handle parts with large erase blocks. From Kosma Moczek 2014-06-30 07:52:57 -06:00
Gregory Nutt
ed1aa8c594 E1000: Rename uip_dev to netdev 2014-06-29 13:03:19 -06:00
Gregory Nutt
fce2a79abd Rename uip_driver_s net_driver_s 2014-06-27 16:48:12 -06:00
Gregory Nutt
64ba574ecc Move files to net/utils; make appropriate name changes, most for uip_lock to net_lock 2014-06-26 14:23:21 -06:00
Gregory Nutt
621097b6c8 Rename ip_eth_hdr to eth_hdr_s 2014-06-25 09:57:52 -06:00
Gregory Nutt
5d1f8180d4 Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h 2014-06-24 10:14:15 -06:00
Gregory Nutt
37646044ac Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h 2014-06-24 09:28:44 -06:00
Gregory Nutt
8b450d6d1b SAMA5D4: Add EMAC driver 2014-06-11 12:23:31 -06:00
Gregory Nutt
6f9bcd321c Config/build changes to better support the RTL8187 2014-06-09 09:11:04 -06:00
Gregory Nutt
2e08560fa0 Clear rxhead on disconnect to prevent data from being resent on re-connect 2014-06-06 10:34:58 -06:00
Gregory Nutt
90e4b55e0c Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_ 2014-05-30 12:13:06 -06:00
Gregory Nutt
6f3cb90c05 Cosmetic changes 2014-05-28 14:09:58 -06:00
Gregory Nutt
2abe0dd6dd Change all variadic macros to C99 style 2014-05-22 09:01:51 -06:00
Gregory Nutt
2a509d560f CC3000: Fix build when POLL is enabled. From Jussi Kivilinna. 2014-05-21 07:37:46 -06:00
Gregory Nutt
b584ecb967 CC3000: Fix a race condition in start-up of unsoliced_thread. From Jussi Kivilinna 2014-05-21 07:32:32 -06:00
Gregory Nutt
b2d26436de Configuration has CC3000_SPI_MODE settings but source uses CONFIG_CC3000_SPIMODE. From Jussi Kivilinna 2014-05-21 07:20:09 -06:00
Gregory Nutt
a9d89b5442 Correct SPI mode for CC3000 is CPOL=0 CHPA=1. From Jussi Kivilinna 2014-05-21 07:17:46 -06:00
Gregory Nutt
c48bd737d0 SAM4E-EK: Add a driver for the on-board LCD (not tested on initial check-ing) 2014-05-13 10:38:46 -06:00
Gregory Nutt
ddf151c226 A fix to the last MB85RS1MT patch 2014-05-12 21:42:06 -06:00
Gregory Nutt
e3373aaf39 Add support for Fujitsu MB85RS1MT part. From Charles Ash 2014-05-12 18:43:06 -06:00
Gregory Nutt
b5efb9dd77 Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:01:14 -06:00
Gregory Nutt
7594d8b8cf Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
35e94a5be4 LIS331DL driver: Correct build dependency. Sourceforge ticket #41 from Kosma Moczek 2014-05-08 07:39:10 -06:00
Gregory Nutt
f06e9dbcaa Timer driver updates from Bob Doiron 2014-05-05 14:40:19 -06:00
Gregory Nutt
d897b4de76 Enhanced timer interface from Bob Doiron 2014-04-30 14:08:34 -06:00
Gregory Nutt
020583efa2 drivers/mtd/w25.c: Add support for the 8Mbit W25Q80BV part. From Mark Whitehorn. 2014-04-30 13:31:42 -06:00
Gregory Nutt
d119e4c977 Update TODO list and comments 2014-04-23 13:02:00 -06:00
Gregory Nutt
465bfcb4cf Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few) 2014-04-22 13:42:38 -06:00
Gregory Nutt
972c4cbab5 Nucleo F401RE: Remove PX4 cruft that can in with the port 2014-04-22 12:18:08 -06:00
Gregory Nutt
5df14c7d40 Misc changes to get a clean compilation after incorporating all of Bob Doison's changes 2014-04-22 10:38:08 -06:00
Gregory Nutt
61555fe5e1 Various SAM4S related fixes, mostely related to the timer driver driver and the SAM4S timer/counter. All from Bob Doisin 2014-04-22 09:01:20 -06:00
Gregory Nutt
df33d9bcc8 examples/serialrx added by Bob Doison 2014-04-22 08:40:48 -06:00
Gregory Nutt
3884117ae9 Missing watchdog timer configuration setting 2014-04-21 19:13:21 -06:00
Gregory Nutt
5d7da97a35 SDIO-based MMC/SD improvements from Bob Doiron 2014-04-21 17:15:42 -06:00
Gregory Nutt
9485fbf66e SAM3/4 Interrupt initialization. Default interrupt priority not being set correctly 2014-04-17 14:02:22 -06:00
Gregory Nutt
b83702dd8a HID mouse: Don't include NAKs in error count. From Leo 2014-04-17 11:47:00 -06:00
Gregory Nutt
f58767ce79 MIO183QT-9A LCD driver updated to support reading from the LCD. From Toby Duckwork 2014-04-16 12:17:35 -06:00
Gregory Nutt
7ad2ace833 Costmetic changes to some comments 2014-04-14 16:36:07 -06:00
Gregory Nutt
48cdbfe5ba examples/touchscreen: Add a configuration option to indicate that there is or is not an architecture-specific initialization function 2014-04-14 12:26:49 -06:00
Gregory Nutt
3a1324741a More trailing whilespace removal 2014-04-13 14:32:20 -06:00
Gregory Nutt
f7e5953804 Cosmetic changes for coding style; removal of dangling spaces at the end of lines 2014-04-13 13:18:06 -06:00
Gregory Nutt
494387b33b Make sure that there is one space after for 2014-04-12 13:28:22 -06:00
Gregory Nutt
056aed1274 Make sure that there is one space between while and condition 2014-04-12 13:09:48 -06:00
Gregory Nutt
303cc1902b Make sure that there is one space between if and condition 2014-04-12 12:53:19 -06:00
Gregory Nutt
3ae029fbe7 STM32 OTGFS Host: Fix a logic error introduced in the last check-in 2014-04-12 09:33:52 -06:00
Gregory Nutt
2fcc57edb0 mv ramlog.h and syslog.h to new include/nuttx/syslog 2014-04-10 09:29:30 -06:00
Gregory Nutt
6578d646da Back out part of 610e2aa0c224e2936fe8009ef4a2351ce607067a: Need to be able to select USB console devices when there is no /dev/console enabled. Noted by Librae 2014-04-08 11:04:25 -06:00
Gregory Nutt
27811d28f9 Cosmetic changes to comments and README 2014-04-07 15:28:04 -06:00
Gregory Nutt
4d25119e62 Fix various typos in comments. From Alan Carvalho de Assis 2014-04-06 09:02:02 -06:00
Gregory Nutt
6c5535cc38 SAMA5 clocking: USB clock setup needs to be done no matter the state of BMS and not matter how we are booting 2014-04-05 11:53:20 -06:00
Gregory Nutt
abca33bd6b Cosmetic update to comments 2014-04-05 11:35:05 -06:00
Gregory Nutt
cbdc9155ab SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console 2014-04-01 11:24:15 -06:00
Gregory Nutt
060b84240b Add macro UNUSED to eliminate warnings about variables that are set to unused values 2014-03-30 07:58:58 -06:00
Gregory Nutt
a37c158659 Add missing MIO283QT-9A to the drivers/lcd/Kconfig 2014-03-27 07:38:02 -06:00
Gregory Nutt
6179cdfb91 Eliminate a warning when debug is off 2014-03-26 17:04:13 -06:00
Gregory Nutt
b951732a2b Reimagine the USB MSC worker thread as a kernel thread (instead of a pthread) 2014-03-25 14:19:27 -06:00
Gregory Nutt
30c34c07cf Add an MTD driver to wrap another MTD driver and makes is sector size look like 512 bytes 2014-03-24 17:45:45 -06:00
Gregory Nutt
baa91448e6 net/netdev_findbyaddr.c: Skip network devices that are in the down state. They have no meaning address 2014-03-20 17:27:59 -06:00
Gregory Nutt
b0c2b54ec9 If DCD supports queuing of stall requests then USB MSC delay work-around is not necessary 2014-03-20 15:20:50 -06:00
Gregory Nutt
c6127ad09d If DCD supports queuing of stall requests then USB MSC delay work-around is not necessary 2014-03-20 15:20:24 -06:00
Gregory Nutt
f139391f8a SAM4E UDP: Several fixes related to bulk endpoint transfers 2014-03-20 14:25:56 -06:00
Gregory Nutt
fe9023752a SAM4E: Revise board-specific USB MSC support 2014-03-18 09:31:02 -06:00
Gregory Nutt
42e06fb503 SAM4E-EK: Add support for the SAM4E-EK AT25 serial flash 2014-03-13 14:07:35 -06:00
Gregory Nutt
113d5a2a81 Correct an error introduced in this file in very recent commits 2014-03-06 15:33:02 -06:00
Gregory Nutt
4bbbe80a31 configs/rgmp/x86/default: Configuration converted to use the kconfig-frontends tools 2014-03-06 11:47:16 -06:00
Gregory Nutt
29a4ca8f08 configs/rgmp/arm/default: Configuration converted to use the kconfig-frontends tools 2014-03-06 11:19:05 -06:00
Gregory Nutt
17a96f6e1e configs/us7032evb1/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 09:17:11 -06:00
Gregory Nutt
86d7618733 configs/skp16c26/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 08:28:49 -06:00
Gregory Nutt
a2a3f80120 configs/ntosd-dm320/nettest: Configuration converted to use the kconfig-frontends tools 2014-03-05 12:16:02 -06:00
Gregory Nutt
2c1b3188e7 onfigs/ez80f910200zco/nettest: Configuration converted to use the kconfig-frontends tools 2014-03-03 11:40:29 -06:00
Gregory Nutt
9fd85aec9e configs/olimex-lpc1766stk/nx converted to use the kconfig-frontends 2014-03-02 12:26:52 -06:00
Gregory Nutt
077b211456 Bug fix for the MIO283QT-9A driver from Toby Duckwork 2014-02-19 10:57:32 -06:00
Gregory Nutt
6092b5813a Numerous updates to the CC3000 driver from David Sidrane 2014-02-18 14:16:51 -06:00
Gregory Nutt
6b4796fa5a Fix typo cloned to many files: SAM32 vs SAM34 2014-02-12 13:00:24 -06:00
Gregory Nutt
91b002a043 Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced 2014-02-10 18:08:49 -06:00
Gregory Nutt
8b1d3f6698 remove some unnecessary header files 2014-02-10 14:28:18 -06:00
Gregory Nutt
8ef272911e Update comments in file headers 2014-02-10 13:58:08 -06:00
Gregory Nutt
a9b01d5824 Support for the MIO283QT9A LCD from Toby Duckworth 2014-02-10 12:26:08 -06:00
Gregory Nutt
0070815e87 HID mouse can now support some while mice. Problems with Microsoft mice 2014-02-10 11:53:37 -06:00
Gregory Nutt
752767cfc1 Add a mouse interface that is similar to the touchscreen interface except that it can handle multple buttons and continuously reports positional data so that it can control a cursor 2014-02-10 10:14:22 -06:00
Gregory Nutt
0979cdba0e The USB HID mouse driver is now functional. There are some usage issues as described in the top-level TODO list 2014-02-09 17:40:23 -06:00
Gregory Nutt
2b40128148 USB HID mouse: Fixes the basic data transfer model. Returned position data is still bad 2014-02-09 16:50:09 -06:00
Gregory Nutt
66e4693781 USB HID mouse: Automatically select CONFIG_INPUT with USB HID mouse is selected 2014-02-09 15:57:59 -06:00
Gregory Nutt
0e486c953b Add support for a USB HID mouse. Untested on initial check-in 2014-02-09 13:49:31 -06:00
Gregory Nutt
7b084fcba8 Fix typos in comments 2014-02-09 13:47:11 -06:00
Gregory Nutt
c95cd438ef Minor typo fixes 2014-02-09 13:43:43 -06:00
Gregory Nutt
9f46dac1e2 Add option to indicatet that data is retained in SDRAM 2014-01-28 10:42:49 -06:00
Gregory Nutt
9e2640b896 Networking: Improved status reporting and new carrier management interfaces. From Max Holtzberg 2014-01-21 10:21:45 -06:00
Gregory Nutt
803cdfdaf1 Changes to get PX4 config to build. Also some warning removal 2014-01-14 13:30:22 -06:00
Gregory Nutt
73aa375b87 Add GCc 4.8.2 support for buildroot 2013-12-26 13:24:06 -06:00
Gregory Nutt
0d6a046e67 Add support for Sharp Memory LCD on the Maple board 2013-12-23 16:47:31 -06:00
Gregory Nutt
45d2bf2554 Support for Sharp Memory LCD. From Librae 2013-12-23 16:03:54 -06:00
Gregory Nutt
49f73c04ae Fix a typo that was cloned to several SAMA5 and MTD files 2013-12-21 09:45:27 -06:00
Gregory Nutt
124bd68c6f Finish A10 Timer register definitions 2013-12-13 11:44:52 -06:00
Gregory Nutt
f97be5131c Various fixes to the recent, big procfs checkin 2013-12-12 11:08:20 -06:00
Gregory Nutt
e4471dc8e0 procfs/: Extenstive architectural changes and enhancements by Ken Pettit 2013-12-12 09:21:55 -06:00
Gregory Nutt
62bf4d158d Move ramdisk.h to include/nutt/fs/ramdisk.h 2013-12-10 09:42:58 -06:00
Gregory Nutt
f821e74ebb Move smart.h to include/nuttx/fs/smart.h 2013-12-10 09:38:48 -06:00
Gregory Nutt
e282aad903 Move include/nuttx/fb.h to include/nuttx/video/fb.h 2013-12-10 09:23:54 -06:00
Gregory Nutt
bdfb2f7eb6 More OV2640 initialization logic 2013-12-10 09:10:39 -06:00
Gregory Nutt
4d07c15932 Add OV2640 camera support to test the SAMA5 ISI peripheral 2013-12-09 10:51:22 -06:00
Gregory Nutt
ed9756c137 MTD NAND: Check if block number is out of ragne at top of loop, not bottom, to avoid some bogus transfers 2013-12-05 18:19:48 -06:00
Gregory Nutt
692b087d07 LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks 2013-12-05 10:37:55 -06:00
Gregory Nutt
422b225401 Cosmetic updates to comments and READMEs 2013-12-04 16:41:45 -06:00
Gregory Nutt
ae01f868b2 SAMA5 NAND: Fix some PMECC setup logic 2013-12-04 11:56:56 -06:00
Gregory Nutt
68ccbc0855 Add drivers/mtd/README.txt 2013-12-04 07:46:10 -06:00
Gregory Nutt
d46001a4ba Kconfigs: Fix and issue with SERCOMM_CONSOLE being define in two places 2013-12-02 17:21:46 -06:00
Gregory Nutt
37c5113c94 MTD NAND: Fix an error in the calculation of the page number 2013-12-02 17:21:09 -06:00
Gregory Nutt
7847443f5a MTD NAND: Fix a misplaced endif 2013-12-01 21:06:07 -06:00
Gregory Nutt
c777f90b8a Costmet updates, naming, debug output, README file 2013-12-01 07:39:20 -06:00
Gregory Nutt
1ea447867a SAMA5 NAND: Still debugging 2013-11-28 12:21:33 -06:00
Gregory Nutt
a791b1070b Fix error in SMARTFS partition number reporting 2013-11-28 08:11:13 -06:00
Gregory Nutt
5a18f048ce Add MTD SST25 driver for larger SST25 parts. From Ken Pettit 2013-11-28 08:04:46 -06:00
Gregory Nutt
881c12cad8 Fixes a couple of errors in MTD NAND logic 2013-11-27 15:02:21 -06:00
Gregory Nutt
5fb0062d2d SAMA5 NAND: A few bug fixes for integration. Still lots more to do 2013-11-27 11:04:40 -06:00
Gregory Nutt
4483117a60 SAMA5 NAND: Trivial changes 2013-11-25 14:16:04 -06:00
Gregory Nutt
2be17cd41f SAMA5 NAND: Fix a few race conditions 2013-11-25 13:53:58 -06:00
Gregory Nutt
d1b4f1c466 SAMA5 PMECC: More progress, still not complete 2013-11-24 09:37:59 -06:00
Gregory Nutt
448c8572cd Rethinking some NAND interfaces 2013-11-19 08:50:12 -06:00
Gregory Nutt
d8a3f21a47 Finishes up NAND software ECC logic 2013-11-18 11:42:17 -06:00
Gregory Nutt
3faa880ef1 MTD NAND: Beginning of software ECC logic 2013-11-18 09:43:44 -06:00
Gregory Nutt
22d4eb9cca More NAND stuff 2013-11-17 14:35:57 -06:00
Gregory Nutt
d54832a942 More NAND stuff 2013-11-17 12:22:09 -06:00
Gregory Nutt
0e7a8668a5 Continuing NAND integration 2013-11-17 08:56:30 -06:00
Gregory Nutt
03b9f5a8e6 More NAND logic (still not complete) 2013-11-16 18:26:07 -06:00
Gregory Nutt
d421eb4fd6 Futher NAND development 2013-11-16 13:19:09 -06:00
Gregory Nutt
854e50b48e Further NAND support 2013-11-16 12:22:43 -06:00
Gregory Nutt
7ccbbe07cb Further NAND development 2013-11-16 11:46:35 -06:00
Gregory Nutt
c7657c9c5e EA3131: Framework for USB host support 2013-11-15 15:56:24 -06:00
Gregory Nutt
e53ba01b64 Add support for ONFI compatible NAND devices (NAND logic still incomplete) 2013-11-15 14:11:21 -06:00
Gregory Nutt
897572a552 Moved include/nuttx/mtd.h to include/nuttx/mtd/mtd.h 2013-11-15 11:22:23 -06:00
Gregory Nutt
f1671bb6a7 Alloc CONFIG_FS_READABLE/WRITABLE to be defined in Kconfig files while preserving backward compatibility with legacy configurations (for the time being) 2013-11-15 09:49:27 -06:00
Gregory Nutt
c33fe29c6b I2S character driver now supports configurable timeouts 2013-11-12 10:18:49 -06:00
Gregory Nutt
2dec8fbf58 Various fixes from initial attempts to integrate the SAMA5 SSC/I2C driver with the I2C character driver loopback test 2013-11-11 15:18:57 -06:00
Gregory Nutt
64a7e96f1f I2S simplifed audio buffer queuing 2013-11-10 14:51:33 -06:00
Gregory Nutt
9f10539750 Add apps/examples/i2schar that will eventually use the I2C character drvier to verify I2S 2013-11-10 14:08:45 -06:00
Gregory Nutt
926e91555d VS1053 worker thread stack size is now configurable; Worker thread is named via pthread_setname_np(). From Ken Pettit 2013-11-10 11:03:19 -06:00
Gregory Nutt
f5c82c0df9 Add an I2S character driver. This driver is only intended to support I2S testing and is inappropriate for use with real I2S devices 2013-11-10 10:24:09 -06:00
Gregory Nutt
4214dc9ce9 SAMA5 SSC: Add framework (only) for a forthcoming SSC-based I2S driver 2013-11-07 12:26:53 -06:00
Gregory Nutt
b5791ac7a6 SAMA5 PWM: Driver now in build and configuration system 2013-11-06 12:24:51 -06:00
Gregory Nutt
f67ee984f3 Correct unitialization of composite USB device. A stale pointer was being reused. From David Sidrane 2013-11-05 09:12:08 -06:00
Gregory Nutt
4dec2e4b27 Fix a badly applied patch (actually, non-applied because --dry-run was set) 2013-11-04 11:36:16 -06:00
Gregory Nutt
a4a18241d5 Updated configuration driver from Ken Pettit 2013-11-04 08:52:16 -06:00
Gregory Nutt
bfdee0f0c7 SST25 driver: Added one more use of sst25_cmd. From David Sidrane 2013-11-03 07:56:29 -06:00
Gregory Nutt
fd7126771f Make default request size in the Kconfig file match default in C code 2013-11-03 07:42:25 -06:00
Gregory Nutt
a2b6d12271 Fix to SST25 driver to permit faster write modes. From David Sidrane 2013-11-02 08:27:13 -06:00
Gregory Nutt
4d39db749b Need to lock mutex before signal 2013-11-02 08:10:24 -06:00
Gregory Nutt
861b8bd511 MTD config: Reduce configuration header overhead. From Ken Pettit 2013-11-01 12:22:55 -06:00
Gregory Nutt
7bbc46f721 Avoid calling pthread_join() to wait for USB MSC thread to terminate: This does not work if the caller of usb_mscuninitialize() is in a different task group than the MSC thread. From David Sidrane 2013-11-01 12:09:25 -06:00
Gregory Nutt
0d0c3e66fb Updates to sparck configuration from David Sidrane 2013-11-01 11:40:19 -06:00
Gregory Nutt
b01900d7e6 Add an MTD device wrapper that can used to provide a /dev/config that can be used for retaining configuration data. From Ken Pettit 2013-11-01 07:39:20 -06:00
Gregory Nutt
adeb33fdd2 Fix erase block vs page block confusion in MTD partition logic. From Ken Pettit 2013-10-31 10:40:10 -06:00
Gregory Nutt
890417a0f4 Missing files from last CC3000 driver update from David Sidrane 2013-10-31 09:00:05 -06:00
Gregory Nutt
85e90b0064 Updated CC3000 driver from David Sidrane 2013-10-30 14:37:13 -06:00
Gregory Nutt
6b8c1cc480 CC3000 driver updates from David Sidrane 2013-10-30 10:50:26 -06:00
Gregory Nutt
de234b3a89 Add for audio sub-format in audion system. From Ken Pettit 2013-10-28 12:11:52 -06:00
Gregory Nutt
3fd4629bd7 SAMA5 ADC: Seems functional in all modes including DMA 2013-10-28 10:08:12 -06:00
Gregory Nutt
77c0c6c2d6 CC3000 driver updates from David Sidrane 2013-10-27 18:54:10 -06:00
Gregory Nutt
6eba2e7897 drivers/mtd/sst.c: Fixes for 512 byte sector mode. From David Sidrane 2013-10-27 18:53:09 -06:00
Gregory Nutt
5fe465749f Updated VS1053 audio driver from Ken Pettit 2013-10-27 08:00:16 -06:00
Gregory Nutt
70a191159b drivers/wireless/cc3000: CC3000 driver update from David Sidrane 2013-10-26 17:42:08 -06:00
Gregory Nutt
ba6fe788ea SAMA5 serial: Restore logic to minimize TX interrupts. Oddly, seems to improve ADC stability 2013-10-26 16:02:07 -06:00
Gregory Nutt
0ab6d8382f SAMA5 TC: Debug instrumentation 2013-10-26 14:03:30 -06:00
Gregory Nutt
607acec781 CC3000 driver update from David Sidrane 2013-10-25 16:23:53 -06:00
Gregory Nutt
ba5e6669d0 CC3000 driver update from David Sidrane 2013-10-24 08:03:32 -06:00
Gregory Nutt
76764003a5 Add logic to enable DEBUG_NET if NET=n but WL_CC3000=y 2013-10-23 11:48:57 -06:00
Gregory Nutt
4cf9540563 CC3000 driver updates from David Sidrane 2013-10-23 09:07:32 -06:00
Gregory Nutt
e5c2496d6a SAMA5 CAN: Driver is now code complete but still untested 2013-10-22 15:47:52 -06:00
Gregory Nutt
6fda497bc1 Updated Spark/cc3000 files from David Sidrane 2013-10-18 17:14:58 -06:00
Gregory Nutt
6a524b5734 Enhanced the mmcdd_sdio driver to perform DMA preflight operations and fail DMA read/write requests that fail preflighting. From Mike Smith 2013-10-18 08:24:18 -06:00
Gregory Nutt
944e0fe81d Changes to stm32_dmacapable interfaces from Mike Smith 2013-10-18 08:06:23 -06:00
Gregory Nutt
8ad32012ab New touchscreen scaling algorithm for the case where measured X values vary with y position (and vice versa) 2013-10-17 12:07:14 -06:00
Gregory Nutt
8cd7eea7ad CC3000 driver changes from David Sidrane 2013-10-16 13:18:53 -06:00
Gregory Nutt
4e44868f12 CC3000 driver changes from David Sidrane 2013-10-16 11:59:26 -06:00
Gregory Nutt
48a8364267 CC3000 driver changes from David Sidrane 2013-10-16 11:59:22 -06:00
Gregory Nutt
4e3d02b216 Add support for the SST25VF016B serial FLASH. From Davide Sidrane 2013-10-16 08:28:58 -06:00
Gregory Nutt
e555cfaa5b Updated CC30000 example from David Sidrane 2013-10-16 07:29:25 -06:00
Gregory Nutt
edf984df2d ENCX24J600: Improved descriptor handling, free packets on rx abort interrupt. From Max Holtzberg 2013-10-11 10:57:58 -06:00
Gregory Nutt
63b6d3bde3 Add NSH addroute and delroute commands 2013-10-05 15:42:20 -06:00
Gregory Nutt
417f67c132 Clean up some naming: fd vs. fildes vs. filedes and filep vs filp 2013-09-28 16:50:07 -06:00
Gregory Nutt
f3a7625fca ENCX24J600: Use separate pools for RX and TX descriptors. From Max Holtzberg 2013-09-28 09:09:00 -06:00
Gregory Nutt
95bfcafb47 ENCX24J600: Remove poll for new TX data from TX done interrupt handling 2013-09-27 08:34:11 -06:00
Gregory Nutt
e4af9572d0 Beginng of support for GMII/RGMII PHYs 2013-09-26 15:55:21 -06:00
Gregory Nutt
b3ecd158ac Mov apps/examples/composite to apps/system/composite; convert configs/stm3210e-eval/composite to use kconfig-frontend tools -- untested 2013-09-25 18:50:14 -06:00
Gregory Nutt
22fe508443 Move CONFIG_NET_DUMPPACKET from LPC17 and STM32 to commong network drivers. Automatically enabled CONFIG_NETDEVICES when any Ethernet driver is enabled 2013-09-25 11:50:05 -06:00
Gregory Nutt
788d1623ae Fix badly applied patch to ENCX24J600 2013-09-25 08:26:56 -06:00
Gregory Nutt
9a9fc90794 SAMA5 UDPHS: Dont' reject read request submissions while stalled. That causes an infinite loop. When stalling, cancel all pending write requests, but cancel only a reqd request if it is in progress. It will be immediately requeued 2013-09-24 15:06:17 -06:00
Gregory Nutt
368867f06e ENCx24J600 UDP backlog support from Maz Holtzberg 2013-09-24 09:03:16 -06:00
Gregory Nutt
773a693ee2 Cosmetic changes to comments and coding style fixes 2013-09-22 14:48:22 -06:00
Gregory Nutt
cf5cf0da72 SAMA5D3x-EK AT25 Serial FLASH: Dropping SPI frequency to 10MHz gives more reliable behavior 2013-09-22 12:22:55 -06:00
Gregory Nutt
f22e60c392 Use a valid interval for the interrupt endpoint in the CDC/ACM driver 2013-09-22 11:35:44 -06:00
Gregory Nutt
5b17e9da79 Cosmetic changes to USB host class driver files 2013-09-21 12:19:12 -06:00
Gregory Nutt
60bd791dec SAMA5 + HID Keyboard. Fixes to initialize the HID keyboard class 2013-09-20 15:23:00 -06:00
Gregory Nutt
5d0131fc73 Names of some USB device definitions changed to avoid collisions 2013-09-20 10:00:30 -06:00
Gregory Nutt
72340b85fe Add support for multiple PHY selections for multiple Ethernet MAC drivers 2013-09-17 10:52:23 -06:00
Gregory Nutt
b3018d8bf0 Add support for the AT 24C512 EEPROM 2013-09-12 09:44:38 -06:00
Gregory Nutt
349677aaf9 Fix a reference counting error in the USB host mass storage class 2013-09-10 11:38:40 -06:00
Gregory Nutt
89c829d1ae SAMA5 EHCI: Did not work with DEBUG off. Appears to be because of some D-Cache flushing that was performed only with DEBUG ON. Now is unconditional 2013-09-10 10:12:51 -06:00
Gregory Nutt
c6bf25bca0 Extent the the USB host trace logic to include verbose debug output 2013-09-09 17:27:21 -06:00
Gregory Nutt
3ba64b0cfe USB monitor extended so that it can also be used with USB host trace data 2013-09-09 15:02:33 -06:00
Gregory Nutt
fbd5ab0758 Beginning of support for USB host side tracing 2013-09-09 14:01:52 -06:00
Gregory Nutt
a992004b0e USB MSC host class driver: Don't bother retrying to initialize the FLASH if the interface is returning fatal transfer errors 2013-09-09 10:00:16 -06:00
Gregory Nutt
40f84dfa19 Trivial updates assocaited with USB host mass storage and SAMA5 EHCI 2013-09-08 13:42:56 -06:00
Gregory Nutt
9a9de5de81 Fix warnings in USB MSC when compiled for a high speed device; also fix USB MSC default VID/PID configuration 2013-09-07 10:12:02 -06:00
Gregory Nutt
0585cd5692 Extend USB trace logic. When we are configured to decode and stringify trace data, de-stringification support is not included for class driver trace output 2013-09-06 17:24:02 -06:00
Gregory Nutt
b95886626e Back-port some bugfixes from the ENCX24J600 to the ENC28J60 driver (unverified). From Max Holtzberg 2013-09-06 13:17:12 -06:00
Gregory Nutt
8912bcb1ea SAMA5D3x-EK: Add support for USB MSC device on AT25 serial flash 2013-09-06 13:07:29 -06:00
Gregory Nutt
fb37248343 CDC/ACM and PL2303 device drivers: Don't use the max packet size assigned to an endpoint in order to determine the request buffer size. The endpoint has not yet been configured that max packet size may be wrong. 2013-09-05 18:00:16 -06:00
Gregory Nutt
ce6368793a Some restructing of the CC3000 build 2013-09-04 16:40:57 -06:00
Gregory Nutt
64f1c78367 CC3000 driver updates from Alan Carvalho de Assis 2013-09-04 09:45:59 -06:00
Gregory Nutt
29d4748b1b Initial cut of a driver for the TI CC3000 network module with support on the Freescale KL25Z board from Alan Carvalho de Assis 2013-09-03 14:59:48 -06:00
Gregory Nutt
c162cca9e8 SAMA5 UDPHS: Some very early debug corrections. Not yet working. 2013-09-02 12:26:15 -06:00
Gregory Nutt
67a126a5dc Misc USB device changes reated to SAMA5, trace support, and USB monitoring 2013-09-01 11:52:21 -06:00
Gregory Nutt
ac130dc2f3 CDC/ACM Device: Fixe compilation errors when dual speed support is enabled 2013-09-01 11:27:59 -06:00
Gregory Nutt
a3af5b3aaf SAMA5 OHCI+EHCI: Using cp15_clean instead of cp15_coherent; EHCI: Need to set alt pointer in order to handle short transfers. 2013-08-27 13:07:21 -06:00
Gregory Nutt
bc46b447dc Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
12beaf4b1a Add a new method to the USB host driver interface: getdevinfo. This method will return information about the currently connected device. At present, it only returns the device speed. The speed is needed by the enumeration logic in order to set a credible initial EP0 max packet size 2013-08-26 15:46:16 -06:00
Gregory Nutt
463c40c42e ENCX24J600: Use the ENC's SRAM from multiple TX packets. From Max Holtzberg 2013-08-26 09:11:58 -06:00
Gregory Nutt
70be601ea2 Add ENCX24J600 Ethernet driver and support for the ENCX24J600 with the Olimex STM32 P107 board. From Max Holtberg 2013-08-25 11:21:54 -06:00
Gregory Nutt
e5208a6e92 ENC28J60 errors reported by Max Holtzberg 2013-08-21 08:10:32 -06:00
Gregory Nutt
19d7c90d4e USB host: Add device address management support in preparation for USB hub support 2013-08-18 14:31:57 -06:00
Gregory Nutt
a65ac5bc72 Back out most of the changes of 3b04d08043742b9e65cf38d45988b35bff91daed 2013-08-13 14:12:27 -06:00
Gregory Nutt
b575450a04 Separate SAMA5 OHCI interrupt handling into separate functions 2013-08-13 13:34:35 -06:00
Gregory Nutt
120a3604c9 More changes to USB host interface to support multiple downstream ports 2013-08-12 16:29:33 -06:00
Gregory Nutt
ed49812d2c Add untested OHCI driver for the SAMA5; structure naming and header files for USB host initialization prototypes 2013-08-11 17:11:32 -06:00
Gregory Nutt
dd3c682443 SAMA5: Some improvements to the HSCMI card removal/insertion logic 2013-08-11 11:13:11 -06:00
Gregory Nutt
0f20d4581b Added FIONREAD and FIONWRITE to CDC/ACM driver. From Lorenz Meier 2013-08-10 19:21:39 -06:00
Gregory Nutt
82b528e0c8 Serial FIONREAD, FIONWRITE, and TERMIOS I/O processing from Mike Smith, Andrew Tridgell, and and Lorenz Meier 2013-08-10 19:14:05 -06:00
Gregory Nutt
97e13b33ab MMC/SD SDIO: Correct return values when multiple block transfers are suppressed. From Andrew Tridgell via Lorenz Meier 2013-08-10 18:29:22 -06:00
Gregory Nutt
da4cebf572 SAMA5: Fix HSMCI race condition. Now memory card interface is functional with DMA 2013-08-10 18:01:23 -06:00
Gregory Nutt
968b2553cd Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level 2013-08-10 09:06:53 -06:00
Gregory Nutt
628f50ba61 SAM3,4,A5 DMA fixes; SAMA5 SPI driver now supports DMA transfers 2013-08-09 13:12:16 -06:00
Gregory Nutt
ce9eb71495 SAMA5: A few early, easy bug fixes. The rest will all be difficult 2013-08-06 11:29:53 -06:00
Gregory Nutt
cbe8c5ed56 SAMA5: Add logic to auto-mount a file system on AT25 SPI FLASH for NSH 2013-08-05 08:24:39 -06:00
Gregory Nutt
906506c61c SAMA5D3x-EK: At support for the AT25 serial FLASH 2013-08-04 16:56:41 -06:00
Gregory Nutt
77e1c27005 Update SAMA5D3x-EK board configuration to support on-board UART connections, LEDs, and push buttons 2013-07-24 12:27:12 -06:00
Gregory Nutt
c6b141d190 Fix typoes in drivers/rwbuffer.c from Chia Cheng Tsao 2013-07-09 07:59:28 -06:00
Gregory Nutt
37ed44a1ee Fix type in the USB composite device driver 2013-07-04 07:47:32 -06:00
Gregory Nutt
0ff5a0c791 Correct port direction for Arduino MISO signal 2013-07-02 12:37:20 -06:00
Gregory Nutt
cfb156f286 Add support for touchscreen on ITEAD Arduino shield. Untested 2013-07-02 08:25:53 -06:00
Gregory Nutt
bdf96a93db Revise how delays are calculated in SPI bit bang driver so that we may get a little better frequency resolution 2013-07-01 20:55:36 -06:00
Gregory Nutt
652c33a53a clean up of SPI bit bang logic 2013-07-01 17:49:43 -06:00
Gregory Nutt
e1dab23711 Add a general bit-bang SPI lower-half driver and implement the bit-bang driver for the Arduino ITEAD TFT shield 2013-07-01 16:50:16 -06:00
Gregory Nutt
8b68ea2f94 Add a general bit-bang SPI upper-half driver 2013-07-01 12:23:26 -06:00
Gregory Nutt
09faaccc02 Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
3d975e0a08 Fix UG-2832HSWEG04 landscape. Add reverse landscape support to UG_2864AMBAG01 and UG-9964HSWAG01. Fixe NXHELLO default colors for 1-bit mono modes 2013-06-24 12:37:02 -06:00
Gregory Nutt
d971650440 Fix UG-2832HSWEG04 configuration values 2013-06-23 15:17:22 -06:00
Gregory Nutt
d11050e978 Add support for the UG-2843HHSWEG04 OLED and for the SAM4L Xplained Pro OLED module that uses that OLED. 2013-06-23 14:39:56 -06:00
Gregory Nutt
a60e38e13a Fix error in MMC/SD SPI driver introduced with some recent changes; Update TODO list 2013-06-23 10:45:37 -06:00
Gregory Nutt
b41c96e1f8 Beginning debug of SAM4L Xplained SLCD 2013-06-22 17:01:44 -06:00
Gregory Nutt
d7ec0089a7 Fix for ENC28J60 from Dave 2013-06-22 08:55:16 -06:00
Gregory Nutt
161af4bf33 MMC/SD SPI speed field is only used if CONFIG_SPI_OWNBUS is not defined 2013-06-17 18:27:25 -06:00
Gregory Nutt
b9ad057972 MMC/SD driver needs to manage SPI mode and data width as well 2013-06-17 12:31:24 -06:00
Gregory Nutt
c9f1d1857c SAM3U-EK: Correct polarity of the PENIRQ signal 2013-06-16 14:31:18 -06:00
Gregory Nutt
c7fd7a4e27 Re-architected SAM3/4 SPI interface; Change BUSY bit handling in the ADS7843E driver 2013-06-16 10:09:21 -06:00
Gregory Nutt
dd2983e26a SAM MMCSD/SPI related changes 2013-06-15 17:00:52 -06:00
Gregory Nutt
9cf942bcb2 SAM3/4: Loop counter for PLL delay must be volatile or it may get optimized away 2013-06-13 16:18:25 -06:00
Gregory Nutt
83ecc03d17 Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup 2013-06-12 17:32:00 -06:00
Gregory Nutt
3edec35c51 Add flow control support to the STM32 serial driver; Fix some issues with UART2 and 5. From Lorenz Meier and Mike Smith 2013-06-06 14:49:14 -06:00
Gregory Nutt
0e37ec1bfc Add NSRF42L01 driver. From Laurent Latil 2013-06-01 08:03:55 -06:00
Gregory Nutt
4748599a43 .dSYM only needs to be in the same .gitignore files as .exe 2013-05-30 15:02:04 -06:00
Gregory Nutt
7554d2888e Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files 2013-05-30 14:45:31 -06:00
Gregory Nutt
47bbf54f11 Optimize request buffer sizes in the serial USB drivers so that we avoid so many NULL packets and so that the OUT request buffer size is exactly the max packet size. 2013-05-29 12:30:37 -06:00
Gregory Nutt
6d3a292f02 Fix null packet handling in the PIC32 USB device driver. This is a critical bug fix for PIC32. Add support for the USB monitor to the Sure-PIC32MX configuration 2013-05-28 13:36:01 -06:00
Gregory Nutt
f2cb0540a5 Verified the sure-pic32mx/usbnsh configuration 2013-05-27 14:10:34 -06:00
Gregory Nutt
b97a816998 The SLCD driver is now fully functional for Sure PIC32MX board 2013-05-27 11:39:13 -06:00
Gregory Nutt
157789e373 Rename SLCD geometry tructure to attributes; Move MAX contrast to attributes. Add attribute and ioctl commands to get and set SLCD brightness 2013-05-27 07:26:59 -06:00
Gregory Nutt
a3c1949963 Converted configs/pcblogic-pic32mx configurations to use kconfig-frontends. Re-organization of files in configs/pcblogic-pic32mx/src 2013-05-25 11:53:49 -06:00
Gregory Nutt
afa905fc15 Audio subystem update from Ken Pettit. Plus moved some header files 2013-05-21 13:13:05 -06:00
Gregory Nutt
5b86207177 Add audio/ sub-syste, include/nuttx/audio.h interface, and drivers/audio/vs1053.c driver to NuttX. From Ken Pettit 2013-05-19 15:12:28 -06:00
Gregory Nutt
b80707ea78 Add support for R61505U LCD controller on HY-mini STM32v board 2013-05-16 14:06:16 -06:00
Gregory Nutt
88c0911fb1 Various changes and bigfixes for problems detected by CppCheck 2013-05-09 14:23:34 -06:00
Gregory Nutt
84b2c77a63 configs/mikroe-stm32f4: Add new configurations plus support for the MIO283QT2 display from Ken Pettit 2013-05-07 14:34:09 -06:00
Gregory Nutt
337680e346 mio283qt2.c: Need select/deselect LCD in setpower method; hwinitialize did not deselect LCD 2013-05-06 08:34:53 -06:00
Gregory Nutt
345c592258 Fixed to M25P driver from Ken Pettit plus some documentation updates 2013-05-03 17:17:14 -06:00
Gregory Nutt
8757465df2 Replace CONFIG_MTD_SMART in MTD drivers with other conditions 2013-05-03 14:32:08 -06:00
Gregory Nutt
72179b7773 Rearchitecting of some MTD, partition, SMART interfaces, and FLASH drivers to: Better use the byte write capbility when available and to use smaller erase sectors for the erase sector size when available). 2013-05-03 12:52:33 -06:00
Gregory Nutt
4f15d37b62 Add support for the byte write method to MTD partition logic; Beef up the MTD partition test -- and fix resulting bugs detected 2013-05-02 08:07:42 -06:00
Gregory Nutt
9ead6cadff Fix typo in configuration variables: MP25P should M25P 2013-05-01 12:04:39 -06:00
Gregory Nutt
1099eabe3d Cosmetic update to comments 2013-05-01 11:42:36 -06:00
Gregory Nutt
99c2cfc168 Add an optional byte-oriented write method to the MTD interface 2013-05-01 10:59:57 -06:00
Gregory Nutt
ba52f8d3ec Misc changes for clean built od mikroe-stm32f4 configurations 2013-05-01 09:21:13 -06:00
Gregory Nutt
25d5706ca3 SMART block driver plus changes to M25P and RAM drivers needed for SMART support 2013-04-30 19:10:54 -06:00
Gregory Nutt
5d4af79ea0 Incorporate comments from Ken Petit 2013-04-30 17:02:34 -06:00
Gregory Nutt
f9be47ead2 Add configuration and example to test MTD partitions 2013-04-30 15:54:02 -06:00
Gregory Nutt
4d4ece78af Add MTD partition support plus fix some typos in comments 2013-04-30 12:37:34 -06:00
Gregory Nutt
420ca1b256 configs/freedom-kl25z: Change references to NuTiny to Freedom KL25Z 2013-04-25 20:09:15 -06:00
Gregory Nutt
b630e6a153 Useless TIOCSERGSTRUCT logic in most serial drivers is not compiled unless CONFIG_DEBUG and CONFIG_SERIAL_TIOCSERGSTRUCT are defined 2013-04-25 15:52:48 -06:00
Gregory Nutt
f9b9875952 Various Kconfig files still have references to CONFIG_ variables. Some in harmless comments, some in config definionts which is not harmless. All removed 2013-04-25 15:52:00 -06:00
Gregory Nutt
37da13321c kconfig2html: Perform HTL conversions and add hyperlinks for dependency expressions 2013-04-21 11:01:46 -06:00
Gregory Nutt
3f52b0fbb6 Yet more kconfg2html logic 2013-04-20 17:29:10 -06:00
Gregory Nutt
fc4c714523 Add support for the FM25V01 part 2013-04-18 16:12:37 -06:00
Gregory Nutt
3e6b7a33f2 Fix some naming and comments associated with the Open1788 touchscreen 2013-04-15 11:25:08 -06:00
Gregory Nutt
ad2ebf1dd8 Convert olimex-lpc17stk configuration to use the kconfig-frontends tools; Fix some compile errors in the pl2303 USB device driver 2013-04-12 08:38:52 -06:00
Gregory Nutt
b841dac0be Minor clean-up while debugging the Open1788 touchscreen 2013-04-12 08:37:20 -06:00
Gregory Nutt
db78b76102 Mostly updates and corrections to .gitignore files 2013-04-04 15:39:50 -06:00
Gregory Nutt
23db0682b7 Clone svn:ignore directory atributed to .gitignore files 2013-04-04 14:27:29 -06:00
patacongo
e1daee1930 Several fixes for LPC1788 GPIO 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5813 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-03 19:35:21 +00:00
patacongo
e1e8f4debe SSP driver fixes for the LPC178x; Fixes for Open1788 touchscreen driver 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5812 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-02 16:36:19 +00:00
patacongo
0bfa1b75e2 Add support for STM32 F427/437 chips. From Mike Smith 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5807 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-01 13:43:31 +00:00
patacongo
d9992b32c7 LPC17 LCD driver is code complete and in need of testing 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5788 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-26 20:06:53 +00:00
patacongo
ebf9960deb convert Kwikstik K40 configurations to use kconfig-frontends tools 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5784 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-25 17:33:41 +00:00
patacongo
f6206367fb More ST5767 LCD files missed in last commit 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5773 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-22 14:31:48 +00:00
patacongo
5e9fb81e0d Add an ST7567 LCD driver for ZKIT-ARM-1769 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5772 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-22 14:30:54 +00:00
patacongo
730dc3e202 Add missing implementation of O_NONBLOCK for serial writes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5755 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-18 16:04:29 +00:00
patacongo
18ca1965b6 AT91SAM3 now supports kernel-mode heap; SAM3U-EK knsh configuration converted to use kconfig-frontends tool 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5726 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-10 19:31:10 +00:00
patacongo
1ef904003e Create sched_ufree and sched_kfree from sched_free; Use user-accessible heap to allocae stacks 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5725 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-10 15:32:33 +00:00
patacongo
1c52dce216 More changes for a kernel-mode allocator (more to be done) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5724 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-09 21:12:20 +00:00
patacongo
7d20a67179 Fixes to STM32 SPI, USB MSC class driver, and MMC/SD SPI driver from Petteri Aimonen 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5688 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-28 17:34:57 +00:00
patacongo
d621681866 Some NuTiny-SDK-NUC120 size reduction; All serial driver vtables should be static const 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5683 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-27 22:24:49 +00:00
patacongo
2c9d402ad4 A few NuTiny-SDK-NUC120 fixes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5667 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-23 23:42:06 +00:00
patacongo
d932e56dca STM32 F4 patches from Petteri Aimonen (mostly USB) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5652 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-15 14:37:37 +00:00
patacongo
d43f284715 Missed SST39VF driver in commit 45640 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5642 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-12 00:52:52 +00:00
patacongo
69fd9e1415 Add a driver for the SST30VF NOR FLASH parts 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5640 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-11 21:44:00 +00:00
patacongo
ad447766ff Fix a readline bug. If a NUL is received, it would return end-of-file 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5633 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-10 00:46:27 +00:00
patacongo
153984b9c9 Several patches from Petteri Aimonen 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5625 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-08 15:28:07 +00:00
patacongo
329328e5df New interface task_spawn(); exec_builtin() now uses task_spawn(); All argv types should be char * const * not const char ** 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5598 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-02 19:31:30 +00:00
patacongo
cf411bec51 A spurious checkin... I just want to improve some code structure 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5597 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-02 01:50:34 +00:00
patacongo
11aa231cf0 drivers/serial.c: Fix some race conditions. Some bad things code happen if we lost a USB connection at certain times. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5596 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-02 00:29:55 +00:00
patacongo
9a05ccdbbc Last minute 6.25 change 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5595 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-01 22:51:34 +00:00