Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Fix the nxstyle Left/Right brackets in a new lined
Author: Alan Carvalho de Assis <acassis@gmail.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
arch/z80/src/ez80/ez80_timerisr.c: Fix an error that looks the file got damaged by a bad keystroke in the editor while a string was highlighted.
boards/z80/ez80/z20x/src/ez80_spi.c: Fix some bad conditional compilationi. Prevented W25 chip select from being initialized.
This reverts commit f735584514.
These header changes introduce unacceptable errors:
1. The changes alter the width of the initial block comment. That will cause nxstyle failures on most of the files.
2. The third line of the header is an (optional) short description of content of the the file. This change erroneously removes that line.
Automated header file changes can screw up a lot of files, very quickly.
Commit 797e45d6bf attempted to reduce the frequency of SPI reconfiguration by keeping track of the current frequency and mode settings and changing these settings only when the new settings differ from the old settings.
However, the original commit neglected to save the new frequency setting and, hence, was not effective in what it was trying to do: Every time the SPI setfrequency() method was called, it still looked like a new frequency and the frequency was still reconfigured, even though it hadn't really changed.
arch/z80/src/ez80/ez80_spi.c: Add logic checks to eliminate unnecessary SPI reconfiguration.
arch/z80/src/ez80/ez80_timerisr.c and arch/z80/src/ez80/ez80f92.h: Fix numerous places where configurations began with CONFIGS_ instead of CONFIG_
arch/z80/src/ez80/ez80_spi.c: Do not configure SPI chip select pin. It is not used by the driver and configuring it just clobbers other usage of that pin. Add some additional debug outputs; correct some exiting debug outputs.
drivers/mtd/w25.c: Add some debug output.
boards/z80/ez80/z20x/src/ez80_w25.c: Correct SPI bus number used in initialization. Only SPI1 is supported.
arch/z80/src/ez80/ez80_timerisr.c: Some initial timer configuration fixes.
* tools/Config.mk - Add empty definition POSTBUILD
* tools/Makefile.unix/win - Replace CXD56xx specific logic with $(call POSTBUILD)
* boards/arm/cxd56xx/scripts/Config.mk - Add POSTBUILD definitions with logic removed from Makefile.unix/win
* boards/arm/cxd56xx/spresense/scripts/Make.defs - Include the CXD56xx Config.mk immediately after tools/Config.mk so that the empty POSTBUILD definition will be replaced with the correct one
NOTE: There is a precedent for this approach. This is the way that other architecture-specific build options are implemented. See, for example, tools/zds/Config.mk
Github action CI workflow steps as below:
1. Use docker container with build essential tools preinstalled
2. nxstyle check pull request with checkpatch.sh
3. Call testing cibuild.sh to do jobs matrix check builds
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
The SPECIFIC_DRIVERS configuration was removed from the drivers Kconfig and
the build will ignore the specific drivers.
This patch enables the config locally for the CXD56 board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This sensor driver needs rework to match the needed layout for standar NuttX driver.
In the meantime it is moved to board specific sensors to fix the violation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
If we are going to use this tool for things like
git pre-commit hook or CI workflow, it's critical to
avoid false alarms.
This reverts commit de764af9aa.
The DBGMCU_APB1_FZ bit persists over regular software resets until next POR-reset. It can impact device power consumption and things that persist over resets are a bane for FOTA updates so make it disabled by default.
OpenOCD sets this via DAP when connecting to target so enabling this from Kconfig is only useful for users of some other debug tooling.
* SAMA5D27 peripheral support - USB Host working
- updated nsh defconfig with vfat for testing USB Host
- sama5d2_xult: USB Host worked.
- ported sam_bringup.c code from sama5d3-xplained
- USB 2.0 HS now working
- other perpherals may work, but haven't been tested
* update license headers to approve NuttX Apache-2.0
arch/z80/: include/ez80/irq.h, src/ez80/ez80f92_*.asm: Correct some comments related to vector address offsets.
boards/z80/ez80/z20x/scripts/z20x_loader.linkcmd: Fix RAM offset in linker script
Also remove the horrible violation of the architectural rules by adding an include path into net in sched/group/Make.defs. Folks, if you are going to participate in this project, you MUST respect the odule architecture and never, never, never do these things.
commit d07afc934e, "fcntl: add O_CLOEXEC/FD_CLOEXEC support" introduce a compilation error .. a bad file inclusion. That commit added an unnecessary inclusion of "socket/socket.h" which is NOT available in the sched sub-directory. It is only available under the net/ sub-directory.
There is no include path for such and inclusion and there must NEVER be such a include path. Module design forbids including header files between diffent "silos" in the design. Nothing under net/ can ever be available to logic under sched/.
Commit 3b53cd1e57, " Fix improper use of inline" missed conversion of several inline functions. Also, some functions that require arguments were not handled correctly,
This was noted because there were still hundreds of implementations of the cache stubs in the ez80 build. This commit adds the missing conversions and fixes the bad function arguments.
