Gregory Nutt
8052dc4955
STM32 SPI: nbits should be unsigned. Valid range is 4-16 for F3 and L4. 8 or 16 for others.
2016-08-13 16:01:50 -06:00
Gregory Nutt
1a10518dae
Update ChangeLog
2016-08-13 12:03:12 -06:00
Gregory Nutt
8dd17ad5d7
Remove name from ChangeLog/ReleaseNotes per request.
2016-08-12 07:01:19 -06:00
Gregory Nutt
c7b917f317
Update ChangeLog and README
2016-08-02 14:32:13 -06:00
Gregory Nutt
becf7e70c4
Add an I/O Expander skelton driver
2016-07-31 11:52:59 -06:00
Gregory Nutt
5f9ee79298
I/O Expander: Remove hard-coded PCA9555 fields from ioexpander.h definitons. Add support for an attach() method that may be used when any subset of pin interrupts occur.
...
PCA9555 Driver: Replace the signalling logic with a simple callback using the new definitons of ioexpander.h. This repartitioning of functionality is necessary because (1) the I/O expander driver is the lower-lower part of any driver that uses GPIOs (include the GPIO driver itself) and should not be interacting directly with the much higher level application layer. And (2) in order to be compatible with the GPIO driver (and any arbitrary upper half driver), the PCA9555 should not directly signal, but should call back into the upper half. The upper half driver that interacts directly with the application is the appropriate place to be generating signal.
2016-07-31 11:09:47 -06:00
Gregory Nutt
e863643239
Update ChangeLog
2016-07-28 09:42:11 -06:00
Gregory Nutt
59f626313d
Changes from review of last PR
2016-07-25 15:16:51 -06:00
Gregory Nutt
7a0a62988c
Upate ChangeLog
2016-07-25 14:08:09 -06:00
Gregory Nutt
4c1ba592d5
Prep for NuttX-7.17 release
2016-07-25 12:10:27 -06:00
Gregory Nutt
524fc4a49e
Update ChangeLog
2016-07-24 13:54:48 -06:00
Gregory Nutt
a19c099c75
Update ChangeLog
2016-07-14 16:07:23 -06:00
Gregory Nutt
7b370f3f35
Update ChangeLog
2016-07-08 12:43:08 -06:00
Gregory Nutt
d7c55868b9
Update ChangeLog
2016-07-04 09:47:41 -06:00
Gregory Nutt
7f296f9226
Update ChangeLog
2016-06-30 08:02:32 -06:00
Gregory Nutt
67ea112767
Update ChangeLog
2016-06-27 13:08:40 -06:00
Gregory Nutt
fc8dfbd45a
Update ChangeLog
2016-06-24 11:00:37 -06:00
Gregory Nutt
a8a4792b07
Update ChangeLog
2016-06-21 13:01:50 -06:00
Gregory Nutt
ec1e1a10fd
Make system: Build the drivers/ directory even if file descriptors are disabled. There are still things that may be needed from the drivers/ director (such as SYSLOG logic or lower half drivers).
2016-06-20 16:33:20 -06:00
Gregory Nutt
36e8d6f7d1
Update ChangeLog
2016-06-20 12:47:53 -06:00
Jakub Łągwa
338b915008
While working with version 7.10 I discovered a problem in TCP stack that could be observed on high network load. Generally speaking, the problem is that RST flag is set in unnecessary case, in which between loss of some TCP packet and its proper retransmission, another packets had been successfully sent. The scenario is as follows: NuttX did not receive ACK for some sent packet, so it has been probably lost somewhere. But before its retransmission starts, NuttX is correctly issuing next TCP packets, with sequence numbers increasing properly. When the retransmission of previously lost packet finally succeeds, tcp_input receives the accumulated ACK value, which acknowledges also the packets sent in the meantime (i.e. between unsuccessful sending of lost packet and its proper retransmission). However, variable unackseq is still set to conn->isn + conn->sent, which is truth only if no further packets transmission occurred in the meantime. Because of incorrect (in such specific case) unackseq value, few lines further condition if (ackseq <= unackseq)is not met, and, as a result, we are going to reset label.
2016-06-20 06:55:29 -06:00
Gregory Nutt
d5b8869b10
Update ChangeLog
2016-06-20 06:23:31 -06:00
Gregory Nutt
0fe5c726b5
Update ChangeLog
2016-06-17 17:53:02 -06:00
Gregory Nutt
a308ea553b
Remove some excessive, redundant debug info per request of antin Berezenko. See Issue #8 .
2016-06-14 15:50:23 -06:00
Gregory Nutt
c384f33ac9
Update ChangeLog
2016-06-14 13:24:28 -06:00
Gregory Nutt
eab652bd9a
Update ChangeLog
2016-06-12 17:34:42 -06:00
Gregory Nutt
6b706b1e06
Update ChangeLog
2016-06-09 13:41:07 -06:00
David Sidrane
d8ea955d69
Added STM32FF76xxx and STM32FF7xx families
2016-06-08 08:26:26 -06:00
David Sidrane
44da2c0add
Refactored configs/nucleo-144 sub-directories to support additional nucleo-144 board. Add support for the Nucleo-F767ZI board.
2016-06-08 07:52:19 -06:00
Aleksandr Vyhovanec
c939bbe47a
include/signal.h: Change type of SIG_IGN and related defines to _sa_handler_t
2016-06-07 06:56:19 -06:00
Gregory Nutt
08fd09b8fe
Update ChangeLog
2016-06-06 15:01:25 -06:00
Gregory Nutt
af43ce4f46
Update ChangeLog
2016-06-05 15:01:37 -06:00
Gregory Nutt
a18dbfda6e
Remove drivers/mtd/flash_eraseall.c. It is not used in the OS and is just a dumb wrapper around the MDIOC_BULKERASE IOCTL call.
2016-06-02 10:44:13 -06:00
Gregory Nutt
692ea396e3
Prep for NuttX-7.16 release
2016-06-01 15:45:23 -06:00
Gregory Nutt
6940fe9655
Update ChangeLog
2016-05-30 13:31:19 -06:00
Gregory Nutt
001715d57b
FS: Add logic to detach a file structure from a file descriptor. This is for use only within the OS. It permits an open file or driver to be used across multiple threads.
2016-05-26 09:41:50 -06:00
Gregory Nutt
add152bf24
Update README
2016-05-25 14:07:59 -06:00
Gregory Nutt
54d7eac51d
Update ChangeLog
2016-05-25 08:08:54 -06:00
Gregory Nutt
549f415cf9
Update ChangeLog
2016-05-24 10:54:27 -06:00
Gregory Nutt
15cc1b973d
Update ChangeLog
2016-05-24 07:57:38 -06:00
Gregory Nutt
c7979ad49c
Update README and ChangeLog
2016-05-22 15:17:03 -06:00
Gregory Nutt
5e5b6d677d
Update README and ChangeLog
2016-05-22 15:05:41 -06:00
Gregory Nutt
c0653dc238
Update ChangeLog
2016-05-19 07:51:06 -06:00
Gregory Nutt
1047d63f52
Update ChangeLog
2016-05-17 08:24:09 -06:00
Gregory Nutt
a3f3cc12c0
Update some comments; Fix grammatic error in ChangeLog.
2016-05-13 17:36:08 -06:00
Gregory Nutt
09a58263c8
Update ChangeLog
2016-05-13 12:19:26 -06:00
Gregory Nutt
abc0481a57
Port for the Nucleo-144 board with the STM32F476ZG MCU. From Kconstantin Berezenko.
2016-05-12 09:47:54 -06:00
Gregory Nutt
b096ea077f
Fix some typos in the ChangeLog
2016-05-10 16:40:47 -06:00
Gregory Nutt
e523c93391
Several Makefiles: Add .PHONY definitions to prevent 'clean up to date' message weirdness.
2016-05-10 15:44:06 -06:00
Gregory Nutt
88b79d305f
Update ChangeLog
2016-05-10 11:14:27 -06:00
